Can anyone help me with getiing my GPRS to work when not in the cradle...I used the information on Cingular's Development site and still no luck...I would like to use the device like my old phone, push the "i" and I was connected...any help would be greatly appreciated.
WM2003
ROM A.30.09 ENG
Radio Version A.33.02
Protocol Version 1.3.3
I get The cannot connect, make sure your phone is on or check your settings...
Download newest T-Mo Radio Stack (get from http links in announcment posting) Manually upgrade you radiostack (See threads/search tool for "upgrade downgrade radiostack) you will find enough info after reading a little to make this work. Prob is that ATT radio 1.3.3 proto' does not work on Cing/T-Mo network. You can leave your current ROM, but might want to switch all together to the new T-Mo stuff.
Hello,
I am using cingular on my XDA II along with GPRS and it works great. Here are the right settings:
Goto Start->Settings->Connections
Click CSD Line Type:
Date rate: 9600 .v32
Connection element: Non-Transparent
Click OK
Click GPRS Setting
Make sure PAP Authentication is selected
Click GPRS-Setting
Make sure Class 8 (4R1T) is selected
Click OK
Now we're ready for the settings
Click Connections
Under My ISP Select Add a new Modem Connection
Name: Cingular GPRS (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access Point Name: isp.cingular
User Name: [email protected] (MUST BE UPPERCASE)
Password: ZXY203DC9K0402
Click Finished
You should now be at "My ISP" and have "Cingular GPRS" or similar listed for the name
Click OK
You should be in the main connections window
Under My Work Network, Click Add a New Modem Connection
Hit New
Name: WAP (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access point name: wap.cingular
Click Next
User Name: [email protected]
Password: CINGULAR1
Click Next
Click OK
You should be in the main connections window
Click Set Up My Proxy Server
Check both boxes BUT LEAVE the Proxy Server Box empty
Click Advanced
Type 66.209.11.61 in the WAP and Secure WAP Boxes
Click OK
Click OK
Click OK
these settings should get you going with GPRS over cingular network.
Hi,
How do you like your XDA with Cingular? I am in NYC and can only get 1 to 2 bars with an ok recpetion. Are you using media works as well?
Cant get Cingular GPRS to work...assitance?
Had an old T-mobile pocket PC...unlocked it and flashed XDA Developrs ROM. What are the settings for GPRS, I have the wireless Cingular Media Package
ROM 3.17.03 ENG
ROM Date 5/15/03
Radio 6.18.99
Protocol 324E4
Still Lost
If someonecan email me or pm about this config. on Cingular Service. I am just having a hard time getting the GPRS/ WAP/Internet to connect. I am using a SX56. Plaese Help Someone! :?
Under GPRS
APN: wap.cingular
username: [email protected]
password: CINGULAR1
This is what I use for my GPRS connection with media works. Does your sx56 has a triangle, raoming, icon on?
I am having problmes regitering my xda I on the Cingular netowrk here in Atlanta. Cingular operate here on the 850 band and, while my device can see the T-Mo and ATT networks, I cannot register on either one. I see that folks in this post have connected to Cingular. Are they operating at 1900 in your areas?
I am in NYC and Cingular still operates under GSM 1900. I am not quite sure whether they will start to move away from GSM 1900 to GSM 850 anytime soon, but we are switching to T-mo in october.
Switching is probably a good idea. Right now Cingular are preventing roaming if a native 850 band network is available. If you travel, you will probably have problems...
Changing the sequence
Has anyone that is on Cingular tried to change the sequence of the network search once connected. Phone-->Tools-->Options-->Network-->Set Networks and then check the T-Mobile and AT&T boxes and move them to the top. That should theoretically change the search function for the networks. I.e. look for the T-mob and ATT networks and try to connect prior to looking at the Cingular ones.
Just a thought...
I am in Dallas and they are 850 around here so I have not had a chance to try this myself... but seemed logical.
Dustoff
There are a couple of reasons for us switching to T-mo:
- Hopefully by OCT family plan will still be $9.99 with unlimited Mo to Mo (I think Cingular $9.99 might not be around for that long)
- $19.99 unlimited internet plan anyway you want to use but not abuse it
- GSM 1900 MHZ
- My local sub dealer offers way better deal for T-mo phones
I am hoping that by october P800 will be free and P900 could be on a sub $150 for 1st line and a free V300 for my wife line.
Does anyone know whether this unlimited $19.99 is good for both Blackberry (I will register with t-mo and blackberry.net), cell/pda phone, pcmcia card for laptop and phone connect to laptop via usb/infared? or Do I need to purchase $19.99 for blackberry and another $19.99 for the rest?
Please advise.
I have a new SX56 and used all your settings but no luck
I have used all your settings. I still cann't get connect with cingular.
Does anyone know how to get the configurator on the simens website to send a configuration for sx56 even though they don't support it.
I know the sx1 is list on the site. Is there anyway to modifiy the config of the sx1 to match the sx56 ?
Any suggestions ?
abohsali said:
Hello,
I am using cingular on my XDA II along with GPRS and it works great. Here are the right settings:
Goto Start->Settings->Connections
Click CSD Line Type:
Date rate: 9600 .v32
Connection element: Non-Transparent
Click OK
Click GPRS Setting
Make sure PAP Authentication is selected
Click GPRS-Setting
Make sure Class 8 (4R1T) is selected
Click OK
Now we're ready for the settings
Click Connections
Under My ISP Select Add a new Modem Connection
Name: Cingular GPRS (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access Point Name: isp.cingular
User Name: [email protected] (MUST BE UPPERCASE)
Password: ZXY203DC9K0402
Click Finished
You should now be at "My ISP" and have "Cingular GPRS" or similar listed for the name
Click OK
You should be in the main connections window
Under My Work Network, Click Add a New Modem Connection
Hit New
Name: WAP (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access point name: wap.cingular
Click Next
User Name: [email protected]
Password: CINGULAR1
Click Next
Click OK
You should be in the main connections window
Click Set Up My Proxy Server
Check both boxes BUT LEAVE the Proxy Server Box empty
Click Advanced
Type 66.209.11.61 in the WAP and Secure WAP Boxes
Click OK
Click OK
Click OK
these settings should get you going with GPRS over cingular network.
Click to expand...
Click to collapse
Hi Abohsali
Many thanks for the data! I am assuming that Cingular are operating at 1900 in you area and not 850. Is that correct? Or are these settings allowing you to roam on another providers network, while still using the Cingular sim card. (you are using a cingular sim, correct?)
Regards
Chris
Hi Abohsali,
The WAP Settings works. Thanks, but the GPRS settings don't. I don't know why. I could connect my AOL Instan Messenger but when I try to check my email, it tried to connect to the GPRS.
Any idea? I'm getting tired calling Cingular, they have no clue. Thinking of switching to T-Mobile
Still can't get GSRP with my Simens SX56 (Cingular Network)
I have tried everything I've see here and at Cingular developer site.
I even printed out the paper forum. Cingular(http://alliance.cingularinteractive.com/dev/cda/home) and from this site.
Does anyone have a Siemens SX56 phone using GPRS??
I would love to know what the correct settings are.
When I try to connect I get the following:
The answering modem had disconnected. To check your connection settings and change them if need, tap settings
Help ?? Still can't get GSRP with my Simens SX56
Is anyone ready this ?? Can I get a little help
I finally got both GPRS and WAP to work. Funny thing is that IE could open wap sites if I'm on the WAP network and AOL Instant Messenger could also be run with WAP network.
GPRS is not bad in speed, I could get it to open with IE and turned off the images so it doesn't use a lot of bandwidth and loads faster.
I use the settings from above, but it only works after I called Tech Support to have my account Provisioned. So they did, and when I browse around with IE using the WAP network, a message pop up on the browser saying that Wireless Internet Express is ready to use, click on Activate.
So I did and voila, it works like a charm. I also bought IP Dashboard to monitor how much bandwidth I'm taking whenever I use GPRS. While WAP uses my minutes.
Thanks again Abohsali.
Tips for you guys...
Here's a tip for you guys...
If you use the Pay As You Go Wireless Internet Express (WIX) then the settings above will work as long as you call Technical Support to provision your account. Then the GPRS settings above will work.
But, if you go with Media Works, the unlimited one with Unlimited Wireless Internet Express, then the settings above won't work. But interestingly, the WAP works for downloading email. Before, with Pay As You Go WIX, I have to switch to GPRS to download email. Now I just stay in WAP.
The good thing being in GPRS is that it uses your data connect only, not your minutes. While WAP uses your minutes, but not data. Someone here could correct me if I'm wrong?
Is WAP without WIX free, or is there a $ .01 /kb charge?
How much does the unlimited plan cost?
Whoops, hadn't realise you were in Indonesia
i recently just found out you could use the normal data plans instead of the PDA connect ones but now after ive changed it my internet isnt working at all
i keep getting the "cannot connect" window
is there something i was suppose to do or?
please help
make sure your connection settings are correct.
Should be
Cellular Line GPRS
APN: wap.cingular
User: [email protected]
Pass: CINGULAR1
it may previously been set to isp.cingular
I took PDA connect off yesturday and switched to Media Max 200 with no problems.
I have the new Att Released Rom, so all my settings default to WAP now.
PDA Connect data plan allows you to connect to the internet without going through Cingulars proxy
chances are your still setup to not go through their proxy
im goin off memory, but i believe settings go as follows:
AP: wap.cingular
USERNAME: [email protected]
PASSWORD: CINGULAR1
now heres the difference
Advanced:
This connection connects to the internet -- Check
This connection uses a proxy to connect to the internet -- Check
Proxy Name: wireless.cingular.com
All of that IS Case-Sensitive
hope it works for ya
::EDIT:: Never mind, I should have did a little more searching before posting. My fault!
I have the t-zones unlimited plan on my account. This worked on my SX66 but stopped working when I upgraded to a Hermes.
Here are my current settings
access point name: wap.voicestream.com
HTTP proxy: 216.155.165.050:8080
WAP proxy: 216.155.165.050:8080
It seems to connect to GPRS and I see the "E" symbol on my signal strength but all pages time out. I tired IE and opera browsers
Hmm changed 216.155.165.050 to 216.155.165.50 fixed it... go figure
think that normaly with ip's the 0's in front are never typed out
could be that newer wm roms dident mask out those zero's
and faild because of it
T-Mobile internet Cabs
I've had this problem for the last couple of months. I just found this in the main Networking Forum. It contains ROM specific to your data plan. Mine now works fine, so your's probably will too. http://forum.xda-developers.com/showthread.php?t=311446
I just moved my SIM from a BA (WM5) to an 8525(WM6).. same internet settings, proxy, etc.. (T-Mobile Web) was working on the BA and now it just connects, and eventually times-out with the error 502 message. Tried radio roms 1.47, 1.48, 1.50, no difference. Moved the sim back into my BA and internet works still. What gives? I did look in the registry on the 8525 under tcpip and noticed the gateway address is the same as the assigned dhcp address. This shouldn't be. Using chaps 3.54b Lite ROM.. any ideas?
T-Mobile tech support did in fact verify that they were closing down the WAP apn. Are they capable of making these kind of changes without notifying customers? The reason I ask is they still have instructions posted on the web for configuring windows mobile phones for "Web browsing" using the wap apn and proxy.. as far as I'm concerned they have breached their contract for my paid services.. actually I'm not under contract and this might give me the reason to consider other providers.
UPDATE.. the Black X Beta 2 works with T-Mobile Web and proxy..
I´ll give it a try
Black6spdZ said:
UPDATE.. the Black X Beta 2 works with T-Mobile Web and proxy..
Click to expand...
Click to collapse
I have had a similar problem but in my case I have a Wizard not a BA, I´ve tried all kind of tweaks for
HKLM\Comm\Cellular Line\Parms\Tcpip and
HKLM\Comm\Tcpip\Parms
The default parameters looks the same for the Wizard and the Hermes except that the Hermes shows WINS addresses and the Wizard doesn´t (Please see my signature and provide your data)
i unlocked the phone and i am now using t-mobile but when i try to go on the internet or dowload messages it says connecting to gprs, 3G but it comes out to a faild message because t-mobile dont use 3g...so is there a way i can connect to edge instead? its wm6.1 downloaded from htc's website its super CID and unlocked
Did you update your connection settings to specify:
Cellular Line (GPRS, 3G)
And did you set the access point name to wap.vociestream.com?
That's all you need to get T-Mobile (US) data working.
ok i updated it from wap.cingular to wap.vociestream.com but then it wants you to use a username and password for that would i use my my.tmobile.com password? and username
Leave it blank.
Sorry: I misspelled the address:
wap.voicestream.com
You can also go to T-Mobile's website-they have a section that talk about how to set up Windows Mobile devices to get on the 'net.
I've got an unlocked AT&T Tilt running Ultimate X V6 rom.
I'm in lowgar afghanistan and I'm trying to configure my phone to connect to their access point. I called them up and they gave me the following information...
APN: internet.mtn.com.af
User: wap
Pass: wap
number: *99***1#
ip 192.168.4.145
I've setup two separate connections (one using the APN name via gprs and one using the dial in number via cellular line) neither one seems to work.
I don't know what to do with the ip... I'm thinking it's a proxy for their internal wap sites but who knows...
I've disabled HSPDA. When I try to connect to the APN I get a message that there is no modem on the line. when I connect to the number I get a message that it cannot connect for an unknown reason.
Does anyone here have working settings for MTN afghan? Or know what I need to do to make this work?
Areeba
Don't use the username or password. All you need to program is the APN and proxy. I am not sure how familiar you are with Windows Mobile, but plugging in those two will take you where you want to go. Have been using Areeba internet on my unlocked T-Mobile Wing for 3 months and all is well.
RE: MTN Afghanistan
I am using MTN Areeba with Nokia 95 8GB,
I got settings from Network and it works fine.
Here is the more detail info about Setting up MTN Areeba Manually and other manual.
hxxp://afghanistanforums.com/index.php/topic,17.0.html
Thanks, will sahre this info on proper thread here