Hi all..
I recently bought a cheap carkit for in my car.
I use it in horizontally mode, this because i found it easier to use..
And my navigation is horizontally..
I don't want to use any hardware buttons. because there all in use.
Is it possible to use magnets? I know that u can rotate the screen, but
i'm wondering if it could harm your phone.. Any ideas?
I use one for the same purpose in my car. Works great, and there have been no ill effects thus far. I've probably had my car kit magnet setup for 4-5 months. In my mind, if you want to be as careful as possible do some research on how long it takes to demagnetize something, as the greatest risk is that you demagnetize the built-in magnet used for keyboard prompted keyboard switching. Also, but sure to use the smallest magnet you can find.
Use a button mapper, like AEButton plus to map a "double-click" rotate command to one of the hardware keys. No need of that barbaric magnet stuff lol.
Related
I am in the process of getting tomtom for my wizard as well as a gps device. I need to buy a cradle for the car and was just wondering if the tomtom users out there could tell me wether tomtom runs in landscape or portrait or both, if both which is better?
Hi, it runs in both modes very happily, although it does not automatically switch between landscape and portrait when you slide out the keyboard. You have to manually rotate the screen using the tomtom menu which can be a little frustrating.
I personally always use portait as it fits in the car holder easier, plus you can use the car charger in portrait mode, not in landscape (i guess that depends on the type of car holder you have)
Not sure about other users but i find the landscape mode very slow to update?
i'd definately say portrait because the road ahead is more important than side roads and you can see turnings and junctions earlier in portrait mode.
definitely landscape.
The Wizard screen is too small for having a good view. Also the info at the bottom will be too small.
The wider screen (landscape) also gives better view on ie. roundabouts.
I use the Brodit landscape holder
well thanks for your help guys, as it clears up nothing
i gues i will just have to installl tomtom first then decide for myself....
i use a magnetic disk from CPW and put the metal strip under back cover so when i want it landscape i just turn the phone. secure enough for me.
To all you tom tom owners out there...
On your tom tom install disk is there both palm and PPC software? I got Tom Tom for my treo 650 for christmas, but it will only install to the palm. I seen nothing for the PPC.
I have contacted tom tom and they say i can install it, but that's no help since i do not have it on the disk. Any ideas?
I don't want to go buy it again!!
-John
Cingular 8125
I started to use mine in portrate , then switched to landscape, and getting a wider view is definatly better for me. It makes the readout at the bottom easyer to read. Only bad thing is reading a sideways screen when trying to make a call
TomTom Go's, and Pretty much all other sat navs are landscape, so there must be something in it
Best of both!
My brodit holder is mounted on a tilt swivel. Besides fitting very accurate, there is a possibility to rotate the entire holder 90 degrees. I prefer TT landscape but the use of the keyboard in the holde rmakes no sense... So go for the portrait holder!
Best of both!
My brodit holder is mounted on a tilt swivel. Besides fitting very accurate, there is a possibility to rotate the entire holder 90 degrees. I prefer TT landscape but the use of the keyboard in the holde rmakes no sense... So go for the portrait holder!
Does any smart person know if there a way to stop the aspect change when the keyboard is pulled out? (Basically so the operating system stays portrait instead of changing to landscape)
Cheers,
Richard
lorrin said:
Does any smart person know if there a way to stop the aspect change when the keyboard is pulled out? (Basically so the operating system stays portrait instead of changing to landscape)
Cheers,
Richard
Click to expand...
Click to collapse
This might help:
http://forum.xda-developers.com/showthread.php?p=1098622#post1098622
Mike
Cheers. I will have a look
Why do you need to turn auto rotation off?
sprice82 said:
Why do you need to turn auto rotation off?
Click to expand...
Click to collapse
same reson I want to
to stop the screen rotation when puling out of my case
elivne said:
same reson I want to
to stop the screen rotation when puling out of my case
Click to expand...
Click to collapse
If I understand correctly you mean when taking the device out of the carrying case. The orientation can change when taking it out of the case due to the magnetic catches in the case operating the keyboard magnet operated switch.
If this is the problem then I suggest using a case with no magnets. (a better solution than disconnecting the switch). This however is not the same as not wanting landscape mode when the keyboard is out as the OP wants.
Mike
I remember getting very annoyed with the phone changing orientation when in it's magnetic case when I first got it. I searched and searched for days to find a setting or tweak to fix it. Eventually, I mentioned to my wife that I need to buy a new case.
She said "why don't you put it into the case the other way round?".
I put it in with the screen facing the belt rather than the magnets, and it's worked fine ever since that way round! Felt such an ass!
Sometimes I don't see the wood for the trees me...
I know it's the magnet doing it
I've tried the following:
1. Buy a new case with only one magnet clip (a magnet clip is more comfortable then scotch or any other solution).
2. Reverse the screen to the back.
None works, I think it's the way I pull it out...
Anyway, the only solution doesn't exist, I can't find a normal belt side case.
So my last resort is to find a way to stop the rotation, I always miss calls cuz the rotation during a call slows the device and I can't answer...
I tried to use that registry hack, I followed the instructions and I do not have the rotate icon..even after two resets. Is there any other way to force your screen a certain way?
Hey all,
My Tilt is on the way from AT&T, and I'm looking at cases. The cases that seem to interest me all use magnetic studs. Some have said the magnetic studs can keep the Tilt turned on.
The 2 I like the most are the following:
PDair Book Type
ebay "Premium" Kaiser Case
Anyone had any experience with these or other similar cases with magnetic studs in a similar spot causing problems?
Thanks!
Dont want to hijack your thread but since your on the topic of that case anyone try "PDair Book Type"? Is it still possible to press the keys with the plastic over it?... It doesn't look like it, i seems like you would be pressing more than one button at a time with that plastic over the keyboard.
jinnosuke said:
Dont want to hijack your thread but since your on the topic of that case anyone try "PDair Book Type"? Is it still possible to press the keys with the plastic over it?... It doesn't look like it, i seems like you would be pressing more than one button at a time with that plastic over the keyboard.
Click to expand...
Click to collapse
I think you'll be able to press the keys, but it wont be as good as without the case. As you said, you'll prolly press several buttons at onces and wont get the same feel when typing.
I've used a Prestige case with magnetic closure for a year or more with my AT&T 8525. Never noticed a problem. I'm now using the case with my Tilt, but that's only been a few days. Haven't noticed anything yet, however.
I'm using the PDAir flip case -- the magnetic stud doesn't affect anything. The plastic keyboard cover isn't too bad -- I haven't noticed any problems with multiple keypresses, but it does affect the feel of the keyboard.
I'm looking forward to the Piel Frama case, which should be coming out in the next few weeks. They had a really good case for my old Wizard that used a narrow leather strap & snap to hold the device in the case; you'd unsnap the strap to access the keyboard.
Depends on the magnet strength and location, there have been a few reports of the magnet turning on the phone. The kaiser keyboard uses a magnetic sensor to turn on the phone when the keyboard opens. I'm using a hip holster with mag and not seeing any issue.
I'd say should anyone have the issue, start a thread with brand/model listed for others to avoid.
I have the Seidio case I originally bought for my 8525.
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=394
The two magnets would always "trick" the screen into thinking the keyboard was open and switch it to landscape mode. I always had to wait a few seconds for the screen to switch back when I took it out of the case.
This does NOT happen with the Tilt. The screen stays in portrait mode. I have always liked the quality of the case and the magnets in the flap make it easy to open and shut. So now it is my perfect solution.
no issues here
YodaJM said:
Hey all,
My Tilt is on the way from AT&T, and I'm looking at cases. The cases that seem to interest me all use magnetic studs. Some have said the magnetic studs can keep the Tilt turned on.
The 2 I like the most are the following:
PDair Book Type
ebay "Premium" Kaiser Case
Anyone had any experience with these or other similar cases with magnetic studs in a similar spot causing problems?
Thanks!
Click to expand...
Click to collapse
I have been using a case with two magnetic studs on the flip closure for months now and have had zero issues. Bought mine at Fred Meyers and recomend anyone in need of a good black leather horizontal pouch case to check it out. was 15 dollars and is of the same quality and fit as 40 dollar cases you may see online.
cheers
I've been using a Motorola Case designed for the Q9 with my Tilt and it's worked out quite well. It also has a single magnetic stud closure and I have noticed no issues at all.
I bought the PDair Book Type case same week the Tilt first came out here in the U.S. I have had no problems at all. Non of that shutting off by itself thingy people complain about.
Magnetic cases
Some cases cause screen to wake up, some don't. To eliminate the problem just turn off Slide Wake option in registry. When slide wake is enabled opening the keyboard (or getting too close to a magnet) will wake the screen. Turn this option off and you can use magnetic clasps at will.
ok so, ive noticed recently that my TMO MDA, takes a while to load correctly on an incoming call, because it has to rotate the display, even tho i put it in normally.
turns out...
my case has magnets at the top, and no matter how i put the fone in, it will pick up that magnet, and rotate itself, then rotate back. WHY?????????
i was thinking that i could just like basically find the component ( if ur looking at the back, its toward the bottom left, behind the stylus holder) and remove it.
but maybe theres a better way?
any thoughts?
wouldn't it be easier to take the magnets out of the case? replace them with velcro or something? I certainly wouldn't alter my phone so it works with the case.
That's because the sensor is a reed switch. When the keyboard slides out, a magnet on the keyboard moves close enough to the switch in the other half of the phone to activate it.
Removing the switch (even if you found it - they can be really tiny) would result in phone screen not rotating with keyboard slided out, and you probably wouldn't want it, would you? I'd say to modify the case with velcro or some diffrent locking mechanism, or get another case instead.
that would make sense
ima try to modify my case then. thanks for the immediate response!
I see all the keyboards and stands hold the S7 Plus tablet in Landscape. Has anyone tried a keyboard like this with the tablet in Portrait, is the tablet too top heavy? Also are there any cases that can stand in Portrait... this is the only one I found but it comes with a plastic screen that I don't want which also keeps the fingerprint scanner from working.
So I gave up and made my own. Ringke Fusion case and a Tablet Holder.
I then thought why not have it all, so I cut the bottom of the case so I could also connect the keyboard for when I want to use that.... It did make the case a little looser but it works and protects better than the official keyboard case. But at least I can type and stand it however I want now .
Bobvark said:
So I gave up and made my own. Ringke Fusion case and a Tablet Holder.
I then thought why not have it all, so I cut the bottom of the case so I could also connect the keyboard for when I want to use that.... It did make the case a little looser but it works and protects better than the official keyboard case. But at least I can type and stand it however I want now .
Click to expand...
Click to collapse
FYI, the tablet holder isn't the highest quality item. The first one started to turn too easily, the second one would only spin clockwise. I'm going to buy a 3rd and hopefully 3x is the charm.... I might have to engineer my own. But I do like how when it worked it would click and stay in one position to hold it portrait or landscape as well has able to hold one handed while I walk. Maybe someday someone will make a case with a rotating handle.
I have this stand on my desk at work, works great in either position. It isn't very portable, it thats what you need.
https://www.amazon.com/gp/product/B071K5XXVX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1