Related
I've been reading up about what to do after I tried to "factory reset" my phone and then was stuck at the htc start up soon, which kept looping.
I've been trying to load recovery.img during fastboot (back+power) and then to apply update.zip during recovery (home+power).
However, the problem is that during fastboot, the device isn't recognized (when I go to adb devices on command prompt, no device is listed). I know that my drivers are good bc the device is found when I start up in the recovery mode. I tried to skip the part where I load recovery.img (since when I try to do that, it tells me that it can't be loaded), and to go straight to apply update.zip, but then the phone tells me that update.zip is either bad or can't be mounted.
I have a Rogers Magic (32A). I am a complete newbie, so any help would be greatly appreciated. I should also say that before I tried to do the factor reset, the phone was on the hero rom loaded by a previous user.
try this:
boot in recovery:
fastboot boot recovery.img
then, push update.zip on your sd card ( need a good rom in the tools folder on your computer)
adb shell mount /sdcard
adb push update.zip /sdcard
and apply update.zip with the recovery menu.
thanks for your reply, but it didn't work:
first, it said "cannot load recovery.img"
and then when I tried to mount, it said "mount: mounting dev/block/mmcblk0p1 on /sdcard failed: Device or resource busy"
replace recovery to correct path to your recovery image. (your phone mut be in fastboot mode power with back button pressed)
ex:
fastboot boot c:\sdk\tools\recovery-RAv1.2.1G.img
then your phone must boot on recovery and you could push update.zip
thanks so much. I figued it out - just a simple problem of the update.zip file being corrupt.
pato17 said:
thanks so much. I figued it out - just a simple problem of the update.zip file being corrupt.
Click to expand...
Click to collapse
i am having the same issues.
any help?
beastmods said:
i am having the same issues.
any help?
Click to expand...
Click to collapse
What exactly have you tried to do?
Sent from my HTC Magic using XDA App
Hi. My magic is having the same issues. Although I believe it is my own doing. I was going to create a gold card and I flashed the sappimg.zip, I can boot the phone into fastboot but it us not seen, when I run the fast boot command it just says waiting on device..
I can boot the phone up normally but it does not want to connect to the market our link my gmail account to it..
All to jailbreak... Any ideas?
Edit....
I must have had a poor internet connection last night. I have got the market working.
Sent from my GT-I9000 using Tapatalk
I am having the same problem.
I have a 32b on vodafone uk.
all the device adb drivers have installed fine. I have tried this on both my laptop and desktop (win 7) and when the phone is turned on - it shows fine under adb devices.
When i boot to fastboot, the phone doesnt show, and therefore i cannot load a custom rom.
Trying to root the phone I have so far used the goldcard method to downgrade to get back to 1.5, if i try to flash the recovery img from the phone (using flash rec) then when i boot to recovery (home+power) it hangs on the vodafone screen - this is why i wont to flash from fastboot.
any ideas?
Thanks
phone rooted?
FlashRec is out of date, I'm pretty sure. Is your phone rooted already, or are you at stock?
Hi all!
I have a big problem...
My Hero wan't boot so I go in the Recovery Console.
But if i want to restore a Backup this message appears:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
E: Can't mount SDCARD:
I tried several SDCARDs... same message.
I've wiped all several times. Reformat the SDCARD...
Access via ADB brings:
error: device not found
Fastboot mode is possible... but
fastboot boot cm-hero-recovery.img
in the konsole brings: "downloading 'boot.img'... FAILED (remote: not allow)"...
What can i do?
This might help?.....
http://forum.xda-developers.com/showthread.php?t=681583
then go to .....
http://android.modaco.com/content-page/299174/no-adb-no-sd/page/80/
Thanks for the links...
I could re-flash the T-Mobile ROM (2.73.111.26)... The Hero starts and now it works with Android 1.5 ...
I have access to the SDCARD ... but the USB Connectivity doesn't work...
No ADB and no storage Device in Windows...
"fastboot oem eraseconfig" doesn't work... think about the false HBOOT (HBOOT-1.76.0007)...
flashrec also doesn't work... there comes "Flash FAILED: could not run command"
Any ideas?
Had exactly the same.
Forget about the rom, it doesn't matter (i.e. flash whatever you like).
You already got your SD card support back, for the rest you need to update the SPL (search for an unlocked version for your hero, double-check because it can _really_ brick your device if this fails). After that fastboot oem eraseconfig works and your usb is back to normal.
Did that yesterday, worked like a charm and actually makes sense (unlike other suggestions like "reflash N times", "unplug and replug usb or change the cable" and "send in for service"). Your USB is fine (as seen in fastboot), it's just not working after your kernel booted -> Due to messed up configuration parameters in the flash area. Basically the kernel commandline, if you will..
Wich version of SPL I do you flash?
How do you flash it? Like...
fastboot oem rebootRUU
fastboot flash zip SPL_image.zip
in the fastboot konsole?
RecoveryConsole is not useable to me... My Hero is not rooted anymore... And it seems to be very difficult to get root again :-/
What do you mean by?
Swerner1975 said:
I have access to the SDCARD ... but the USB Connectivity doesn't work...
Click to expand...
Click to collapse
According to BTDAGs guide, flashing 2.73.61.5 should enable you to use flashrec to do the custom recovery again.
[solved] NEED HELP! Bricked? No SDcard in Recovery - no Restore - no adb
Thanks for your help. I have solved the problems...
- first I flashed the T-Mobile D ROM like described in the Link (extract rom.zip and flash)
http://android.modaco.com/content-page/299174/no-adb-no-sd/page/80/
- then I have detected, that flashrec does'nt work on the ROM
- then I created a GOLD Card
- with this I flashed in the OEM fastboot Mode (described here) the HTC Update ROM (_HTC_Hero_RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe)
- then flashrec was working and I was able to flash a Recovery Image
- in the Recovery Console I flashed the unlocked Modaco SPL (from here)
- now it was possible to erase the config, which locked the USB after Kernel Boot (fastboot oem eraseconfig)
- after that I restored the last Nandroid Backup...
- Now I'm happy
Re: NEED HELP! Bricked? No SDcard in Recovery - no Restore - no adb
Excellent news.
-------------------------------------
Sent via the XDA Tapatalk App
Hello!
Yesterday I found myself in a very terrible situation. I spend about 6-7 hours...
It just happened that I deleted the recovery (through fastboot), and before that deleted firmware of the phone. That is, there remained only mode HBOOT (fastboot). Around the internet and google there are no guides on how to return
recovery by the alternative methods or how to flash a new ROM through
fastboot.
Thats why i want to present to you my little guide... Coz i think it will be very useful for some ppls like me with the same trouble.
So, if you're in a situation where you do not have Recovery, and the phone is not started in boot ROM then first try a standard way to flash a new Recovery through fastboot mode
Standart way of flashing new recovery via fastboot
1.Connect your phone with PC via USB and power off your phone (if it up).
2.Than start up in fastboot mode - (in my situation, fastboot mode is CAMERA+POWER, then button "send") in all other (as i know) this is starting the phone while pressing button BACK.
3.Open -> Start->Run->cmd (open command prompt in windows*) and write:
Code:
fastboot devices
Than you must see your device serial number like this:
Code:
H94XTGAMSHDY
and should say "fastboot".
If all right - go next. If not - check fastboot mode (is on?) and USB cable.
4.Than change directory via cmd to where you have saved your recovery image (NEW recovery.img !!! ALWAYS CHECK MD5 SUM)
5. Than type this :
Code:
fastboot flash recovery recovery.img [enter]
(while you are stay in the same dir where you saved recovery.img)
(if you got some error about previously version or smth like this you can try to use this: fastboot erase recovery and only than try to flash new recovery from step №5)
6.Check your phone's display, as recovery is being sent and flashed to your device. And check your command prompt/shell to make sure the process is over.
7.Reboot into recovery by holding Home and Power (before it power off device).
Thats all! You can use any recovery, all what you like. I use Amon_RA's recovery.
IF WHILE FLASHING YOU GOT :
Code:
sending 'recovery' <4594kb>... OKAY [ 1.734s]
writing 'recovery'... INFOsignature checking...
FAILED <remote: signature verigy fail>
finished. total time: 3.125
Use next steps (my Alternative method)
And IF you can't flash recovery by this method it is not big trouble as you think now
Alternative way of BOOTING new recovery via fastboot checked and founded by me
Everything here is much easier and faster!
Do not be scared as I did it yesterday
Only what you need it :
Change directory via cmd to where you have saved your recovery image (NEW recovery.img !!! ALWAYS CHECK MD5 SUM)
And than TYPE:
Code:
fastboot boot recovery recovery.img
And your phone will be rebooted about 2 seconds in RECOVERY MODE. Yes!
After this you can use your old Nand Back up (restore it) and start up your old ROM. Or you can wipe all and try to flash new ROM and many operations what you can use via recovery. When you will get working ROM and flash it - you can flash recovery via adb. Or Use Rom Manager (Not recommended!)
Why we use this method? Because if you got error while flashing - FAILED <remote: signature verigy fail> you CAN'T FLASH ANY .img. Why? I Don't know, i hope some android guru's help us with it theory
(ALL AFTER THIS LINE ALL TEXT COPYED FROM WIKI.CYANOGEN.COM CREDITS GOES TO Cyanogen. Thx you, god)
If you want to flash recovery via adb (using power on phone with working firmware) (This method working 100% but strongly need working phone with working ROM)
Working only with HTC DREAM (G1) - Attention.
adb method by cyanogen version
Restoring the custom recovery image
Download the flash_image tool (HERE LINK
Next, place the file on your desktop
Change the directory to where "flash_image" is located, e.g. in Windows: cd C:\<path-to-flash_image-location>, in Linux: cd /home/USERNAME/path/to/flash_image on a Mac: cd /Users/USERNAME/path/to/flash_image)
IMPORTANT: Turn on USB debugging. Settings -> Applications -> Development -> check the box "USB Debugging"
Open up and adb shell
With your phone booted, type the following command
s:
Code:
adb root
This will start ADB as root, or notify if it is already running as root.
Code:
adb remount
This will mount the system partition (/system) as writable, allowing the following
Code:
adb push flash_image /system/bin
This will send the flash_image script into the /system/bin, so we can use it from within the shell
Code:
adb shell chmod 0755 /system/bin/flash_image
Finally, change the permissions of the script to allow it to perform the desired action.
Now that the script is installed, we are ready to proceed with flashing the custom recovery, saved on the root of the SD card earlier:
Code:
adb shell flash_image recovery /sdcard/recovery.img
P.S. If you want i can post here method by flashing original 1.6 ADP Rom via fastboot (but as i think it is on htc dev web... But i can post here cut version of this - coz original version have many not needed things.)
Credits:
Cyanogen
all xda cool ppls
ANtiHazarD
hey ANtiHazarD i have a desire so im not sure if this is suppose to work but all 3 methods fail for me, any advice, thanks in advance
Nice steps! man hope this gets a good stick or added to the rom bible, you do know though fastboot method is a common way to flash recovery
ilostchild said:
Nice steps! man hope this gets a good stick or added to the rom bible, you do know though fastboot method is a common way to flash recovery
Click to expand...
Click to collapse
That's what I was thinking... Seems almost pointless for a guide since there's instructions how to fastboot on every recovery thread.
Either way, nicely written guide. Someone will probably find this useful.
pablo34 said:
hey ANtiHazarD i have a desire so im not sure if this is suppose to work but all 3 methods fail for me, any advice, thanks in advance
Click to expand...
Click to collapse
With a desire this is quite different, as it has an activated nand flash protection (s-on), so no fastboot flash recovery here. Although this should prevent you from not having a recovery at all...
* note: I don't have a desire (yet) so this is speculation *
Best is probably something similar to this http://forum.xda-developers.com/showthread.php?t=750852
I guess if you get the correct PB99IMG.zip for exactly your device/brand you will not need a goldcard, so don't follow the howto blindly (it is for the newer SLCD versions, but the basics will still be applicable to AMOLED devices). Best would be a PB99IMG.zip that still has a hboot version < 0.92, otherwise you will need to downgrade to root. If you already have 0.92, then just take the newest image, as older ones are normally not flashable.
After step 7 of the howto, you are either done, or you will need to find instructions to downgrade if you want to root.
As soon as you have a working system, with a 0.8* hboot you can just use unrevoked to root and flash a custom recovery.
Enough OT... @ANtiHazarD: Very useful overview. Thanks.
WAY WAY WAY more complicated than it should be...
It is a simple matter of:
fastboot flash recovery recovery.img
Done.
lbcoder said:
It is a simple matter of:
fastboot flash recovery recovery.img
Done.
Click to expand...
Click to collapse
Its not quite that simple,
1) if eng spl use fastboot instructions from RA recovery post (fastboot flash recovery recovery.img)
2) if older stock spl with fastboot ruu modes (1.33.000*) where the * is
lbcoder said:
WAY WAY WAY more complicated than it should be...
It is a simple matter of:
fastboot flash recovery recovery.img
Done.
Click to expand...
Click to collapse
maybe so
but i want to post here ALL known methods thats why so much text is here
why? coz it was a trouble and the method with
fastboot flash recovery recovery.img
not working! thats why - all ways is here.
(all pre-info into 1st post in the top)
pablo34 said:
hey ANtiHazarD i have a desire so im not sure if this is suppose to work but all 3 methods fail for me, any advice, thanks in advance
Click to expand...
Click to collapse
oh... i want to give to you some advice, but don't know what exact. because i don't have desire at my hands... and can't test.
so... thats why only - sorry
maybe there is some guide in the same way in desire section?
p.s. and thanks one more time to ezterry for old support
Can you please help me,
I have stuck here with the G1 phone,
it starts up and stucks on the G! logo.
I can get into fastboot bet have the same problem :
writing 'recovery'... INFOsignature checking...
FAILED <remote: signature verigy fail>
I get into fastboot with thre android logos on skates,
even tried to restore nandroid using fastboot but I get the same error? could you help me out?
I have HTC DREAM with 1.33.0013d and radio 2.22.27.08
I am really frustrated,
I tried all you gave up here but none worked for me.
Also when I try to get into recovery I see a G1 logo with a fastboot usb written on top left in red.
behzadbayat said:
Can you please help me,
I have stuck here with the G1 phone,
it starts up and stucks on the G! logo.
I can get into fastboot bet have the same problem :
writing 'recovery'... INFOsignature checking...
FAILED
I get into fastboot with thre android logos on skates,
even tried to restore nandroid using fastboot but I get the same error? could you help me out?
I have HTC DREAM with 1.33.0013d and radio 2.22.27.08
I am really frustrated,
I tried all you gave up here but none worked for me.
Click to expand...
Click to collapse
Did you read everything before you flashed the 1.33.0013d SPL?
If yes, you would have noticed, that this SPL is not able to flash a recovery or radio using fastboot. You have to flash the orange-...nbh file to get back a full engineering SPL, but you will loose everything you have installed on the phone ...
Send from my G1 with HTCClay's UNOFFICIAL Superfly 1.6 D/S ADS using XDA App
i don't know about this spl, but all what you can do (what i know) you can use this method which named in prev. post. with RC29 or RC7 stock firmware *.nbh
after flashing all data, radio, recovery will be reflashed by a stock data. All must be fine after this... i hope
ezterry can give for your advanced advice, may be
ANtiHazarD said:
i don't know about this spl, but all what you can do (what i know) you can use this method which named in prev. post. with RC29 or RC7 stock firmware *.nbh
after flashing all data, radio, recovery will be reflashed by a stock data. All must be fine after this... i hope
ezterry can give for your advanced advice, may be
Click to expand...
Click to collapse
Don't use RC29.. its once of the most annoying NBH files to need to re-root for the dream.
If you have 1.33.0013d note the orange.nbh posted on the new radio OP post: here
ezterry said:
If you find yourself stuck without recovery!!
Dream
1) Download: orange-1.58.73.2.nbh (MD5: aca4dee0c1ece7e9773f2ecbdfbba7c0) (mirror)
2) enter fastboot and run 'fastboot flash nbh orange-1.58.73.2.nbh'
3) wait for the entire nbh to flash
4) boot into the bootloader again (it will be an engineering SPL 1.42.2000)
5) You can now re-flash the radio/hboot/recovery via fastboot that you wish to have installed.
Click to expand...
Click to collapse
basically if you intend to still use the new radio; after installing 1.58.73.2 you can reboot-bootloader; and use my fastboot installation steps at the top of that post
You can do this without a goldcard because I bypass various checks in 1.33.0013d
(It will let you install any other signed NBH but that will still wipe the phone completely; and if it fails to flash cleanly it will leave you without an engineering SPL thus make it harder to make android go again)
hey i tried to flash the MTD too and now i keep getting "E:cant open CACHE:recovery/log" when i go into recovery . I can flash roms but when i reboot my phone my phone stays in the G1 Logo . and when it does make it to the rom i can not get my market or gapps no matter what i do . please help me guys .
EDIT: theres times when i get past the g1 logo but itll just stay on the roms boot screen forever until the phone dies . does anyone have any ideas ?
try to 'fastboot wipe system -w'
after
wipe all (data/cache, cache, dalvik, ext, stats)
and move log to sd
ANtiHazarD said:
try to 'fastboot wipe system -w'
after
wipe all (data/cache, cache, dalvik, ext, stats)
and move log to sd
Click to expand...
Click to collapse
ive never really done fastboot tho . is there any other way ?
breezy169 said:
ive never really done fastboot tho . is there any other way ?
Click to expand...
Click to collapse
It's worth learning to use it ...
Really, especially when using the 14MB-hack or CustomMTD and it's not so difficult. There should be a tutorial on adb and fastboot here in the forum.
AndDiSa said:
It's worth learning to use it ...
Really, especially when using the 14MB-hack or CustomMTD and it's not so difficult. There should be a tutorial on adb and fastboot here in the forum.
Click to expand...
Click to collapse
i agree but i just finished reading the forum that shows how to do it but it sounds so complicated .
EDIT: i ended up flashing another recovery and that solved the problem . that was the weirdest thinq ive ever seen . and honestly i thought i bricked my phone but it was a simpleee fix lol . thanks for the advice tho
I am hanging at booting while trying to do this any ideas?
hey i accidently flashed 2.22.23.02 on to my rogers htc dream which i figured out needed a different radio now when i turn on my phone it just gets stuck on the rogers screen and i cant boot into recovery or to the bootloader so is my phone now useless or can i fix it
Re-flash it with the correct one according to your ROM. Then you will be good to go.
well he cant get to recovery or bootloader so how will he flash anything? lol jtag? pretty sure you might be out of luck... unless somehow you can get the orange.nbh to flash to your device...
Oops, missed that. I thought I read that he can.
is there any way i can flash it using my computer
thanojan10 said:
is there any way i can flash it using my computer
Click to expand...
Click to collapse
Only if you can get into fastboot or adb..
From the sound of it you had a 3.22.* radio and used recovery to flash a 2.22.* radio.. while both radios work on the phone if you switch them by recovery like that you prob. Have a brick requiring JTAG..
Before giving up hope:
Pull battery + any USB/power wire, replace battery and while holding camera press power..
If you are in hboot, you can restore the phone by fastboot if its an engenering SPL, otherwise a Rogers dreaimg.nbh
If not plug in the USB wire and run on your computer 'fastboot devices' if the phone is found or fastboot USB is on the screen you lucked out (and somthing is wrong with recovery making it fail to load), and can use fastboot to install a valid radio+spl+recovery (make sure you flash all 3 before restarting)
If this isn't working and you can't get into the rom or recovery, you have an ebi0 radio (2.22) with a kernel (recovery) compiled for ebi1 (3.22) and are in boot mode 3 to force the phone to boot into recovery.. Due to the mismatch between the radio and recovery your phone is not able to boot and clear the boot flag to allow normal operation.. Thus without jtag its not possible to enter a useful state.
This is why its recommended to flash radios and SPLs via fastboot when possible since fastboot won't set the boot mode thus allow you at least access to the bootloader in most cases to correct any mistakes.
I have been on a journey trying to go back to my T-Mobile OnePlus 6T back as my daily driver but the official updates killed the device for me. I have been successful in flashing it to the international version and now the device is on A9. I am trying to get it updated to A10 but in order do that (does not take OTA updates or can not flash within the updates app) I have to flash in recovery. Right now it is on stock recovery so I am trying to flash TWRP.
The problem is now that everytime I run the command " fastboot boot IMAGENAME.img" the phone restarts (as expected) and boots into fastboot but stays stuck in the Fastboot Mode screen.
I tried different TWRP images (older and the most current version per https://dl.twrp.me/fajita/ ) but I keep getting stuck in the Fastboot Mode screen. The last thing I was able to do without issues was unlock bootloader using fastboot.
I just need to be able to flash TWRP on the phone so I can still the final stock image so I can go back to using it as my DD.
EDIT: Disregard everything I fixed it. mods, please delete thread.
EDITR 2: Disregard that last edit lol Yeah I still need help. I am now tryingto flash twrp on a second 6T and the issue described above still applies.
You can try this version. Also try unplugging the USB after it reboots. You aren't getting any crash dump screen? So it should be working.
Brettroth said:
You can try this version. Also try unplugging the USB after it reboots. You aren't getting any crash dump screen? So it should be working.
Click to expand...
Click to collapse
Tried your image and still same result. I am running following command
Code:
fastboot boot TWRP-3.6.1_11-OP6xT.img
The command window outputs the following
Code:
Sending 'boot.img' (34964 KB) OKAY [ 0.747s]
Booting OKAY [ 0.092s]
Finished. Total time: 0.860s
The phone then reboots into Fastboot Mode logo and stays stuck there. I even tried unplugging the USB after it reboots as well.
I even tried using the flash command instead of boot but no success.
How about fastboot boot recovery? Should be able to get into recovery somehow. Doing fastboot flash of twrp will mess up your boot partition but either way you still should be able to get into recovery somehow. There is the msm recovery tool you can use as last resort but it will relock your bootloader
Actually fastboot doesn't let you use boot recovery command I don't think. Only adb. But once you are in fastboot can't you choose to reboot recovery with volume keys?
Brettroth said:
How about fastboot boot recovery? Should be able to get into recovery somehow. Doing fastboot flash of twrp will mess up your boot partition but either way you still should be able to get into recovery somehow. There is the msm recovery tool you can use as last resort but it will relock your bootloader
Click to expand...
Click to collapse
I tried doing fastboot boot recovery but i get following error
Code:
fastboot: error: cannot load 'recovery': No such file or directory
Brettroth said:
Actually fastboot doesn't let you use boot recovery command I don't think. Only adb. But once you are in fastboot can't you choose to reboot recovery with volume keys?
Click to expand...
Click to collapse
When I am in fastboot mode, yes I can choose recovery but it takes me to the stock recovery. I do not have a option to flash any zip files there
Maybe you need a twrp for Android 9 since that's what you are on. But fastboot boot twrp should just take you there. Either have to find one that works or go msm route. Maybe windows not reading it correctly also. You using CMD or PowerShell?
Brettroth said:
Maybe you need a twrp for Android 9 since that's what you are on. But fastboot boot twrp should just take you there. Either have to find one that works or go msm route. Maybe windows not reading it correctly also. You using CMD or PowerShell?
Click to expand...
Click to collapse
I tried both CMD and PowerShell. I am going to try a A9 version of twrp
EDIT: I am using twrp-3.6.1_9-0-fajita.img (which I assume is for A9) and still get the same result. Even tried a different usb port.. not sure what i could be missing. I also did the instructions as advised straight from twrp's website.
smartinez832 said:
I tried both CMD and PowerShell. I am going to try a A9 version of twrp
EDIT: I am using twrp-3.6.1_9-0-fajita.img (which I assume is for A9) and still get the same result. Even tried a different usb port.. not sure what i could be missing. I also did the instructions as advised straight from twrp's website.
Click to expand...
Click to collapse
I don't know bud. I guess msm tool is the way to go then
Curious did you have the twrp file in same folder as adb and fastboot?
smartinez832 said:
I have been on a journey trying to go back to my T-Mobile OnePlus 6T back as my daily driver but the official updates killed the device for me. I have been successful in flashing it to the international version and now the device is on A9. I am trying to get it updated to A10 but in order do that (does not take OTA updates or can not flash within the updates app) I have to flash in recovery. Right now it is on stock recovery so I am trying to flash TWRP.
The problem is now that everytime I run the command " fastboot boot IMAGENAME.img" the phone restarts (as expected) and boots into fastboot but stays stuck in the Fastboot Mode screen.
I tried different TWRP images (older and the most current version per https://dl.twrp.me/fajita/ ) but I keep getting stuck in the Fastboot Mode screen. The last thing I was able to do without issues was unlock bootloader using fastboot.
I just need to be able to flash TWRP on the phone so I can still the final stock image so I can go back to using it as my DD.
EDIT: Disregard everything I fixed it. mods, please delete thread.
EDITR 2: Disregard that last edit lol Yeah I still need help. I am now tryingto flash twrp on a second 6T and the issue described above still applies.
Click to expand...
Click to collapse
I'm having same issue with fajita (OnePlus 6T) you found any solution if yes then please give some reply