NOOB HERE..
Been using a 16 GB class 2 microsd and now I just purchased an 8 GB class 6.
What is the best way of installing and transferring all data (including apps2sd) into the new card? I'm currently running cyanogen's 4.1.11.1
Here's what I'm thinking: Back up the contents of my old card (fat32), copy it to new card. Insert new card to phone, repartition fat32/ext3/swap in recovery, reflash ROM and if re-flashing is successful, reinstall apps from ASTRO backup.
Will this method work? Am I missing a step? Am it doing it it all wrong?
I don't want to cause any damage.
ndee1234 said:
NOOB HERE..
Been using a 16 GB class 2 microsd and now I just purchased an 8 GB class 6.
What is the best way of installing and transferring all data (including apps2sd) into the new card? I'm currently running cyanogen's 4.1.11.1
Here's what I'm thinking: Back up the contents of my old card (fat32), copy it to new card. Insert new card to phone, repartition fat32/ext3/swap in recovery, reflash ROM and if re-flashing is successful, reinstall apps from ASTRO backup.
Will this method work? Am I missing a step? Am it doing it it all wrong?
I don't want to cause any damage.
Click to expand...
Click to collapse
That is one way of doing everything or you can look at this here
http://forum.xda-developers.com/showthread.php?t=534714
Related
Hi
I have Cyanogenmod 4.1.999 Installed on my G1
It currently has a Class 4 4GB SD card and I want to put in a Class 6 8GB sd card...
How do I do the switch without deleting any user data?
Is that possible?
chingy1788 said:
Hi
I have Cyanogenmod 4.1.999 Installed on my G1
It currently has a Class 4 4GB SD card and I want to put in a Class 6 8GB sd card...
How do I do the switch without deleting any user data?
Is that possible?
Click to expand...
Click to collapse
Try the switchrom.sh script (link n my sig). It allows you to take a snapshot of your entire system (well, the parts that matter anyways,) zip it and store it on the Fat32 partition. You can then pull that zip to another properly pre-formatted SD card (via PC), then stick that card in and run the restore command. You should end up with a fully functional system with all apps and settings intact.
or you could do a nandroid and just reflash with that sdcard in
Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks
michaels0007 said:
Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks
Click to expand...
Click to collapse
You can change it, but you'll lose everything you've installed and have an out the box phone so to speak.
Well at least that's what happened when I changed from my test SD card to my 8GB
Which Brand memory card do u use?
Hawkeyezghost said:
Which Brand memory card do u use?
Click to expand...
Click to collapse
I use SanDisk
no!!!will not read the new sd,you have to format the new one with the rom you are installing.
N.B: sandisk 8G is highly stable with wp7...
you can switch sd cards without starting over, but then you'd have to copy the partition from your old sd card to your new sd card.
it gets slightly complicated, but only because of the numbers of steps, not technical complications.
use Easeus partition software and try to replicate the exact partitions across the old card and the new card
good luck
bravo261 said:
you can switch sd cards without starting over, but then you'd have to copy the partition from your old sd card to your new sd card.
it gets slightly complicated, but only because of the numbers of steps, not technical complications.
use Easeus partition software and try to replicate the exact partitions across the old card and the new card
good luck
Click to expand...
Click to collapse
Did this work for you? I made a thread about this possibility but nobody knew if it's really working.
Hey there,
my question is the other way. Is it possible to flash an other rom without having my SD in to safe settings and installed apps?
I tested this way:
1. turn off phone
2. pull out the SD
3. boot
My HD2 booted into WP7 and ran a blank WP7 such as it was fresh installed.
Then I turned it off and put the SD back in and booted. It booted into my ol status.
So no I want to if I can flash an other rom, put my already formatted SD with my WP7 settings back in? Is that maybe the best way to safe settings?
olegblochin said:
Hey there,
my question is the other way. Is it possible to flash an other rom without having my SD in to safe settings and installed apps?
I tested this way:
1. turn off phone
2. pull out the SD
3. boot
My HD2 booted into WP7 and ran a blank WP7 such as it was fresh installed.
Then I turned it off and put the SD back in and booted. It booted into my ol status.
So no I want to if I can flash an other rom, put my already formatted SD with my WP7 settings back in? Is that maybe the best way to safe settings?
Click to expand...
Click to collapse
i would test this for you and reply you!!! i didn't think of that before...
michaels0007 said:
Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks
Click to expand...
Click to collapse
i think this link will explain you how to copy the partitions....and more
http://www.techienote.com/tag/technology
Thanks jianototi,
copying the wp7 partition between different sd cards works very well. The system accepts the copy and wp7 launches with all adjustments, downloads and installed apps.
My question now is: Can I reinstall a fresh wp7 nand and insert my sd from old installation? Will the sd be accepted? Or start wp7 with a virgin system?
regards
caiowa
so if we can move a wp7 from one sd card to another. Should it then not be possible to download from the internet, and just copy to sd-card?
Reason i ask is because i cannot get my wp7 to connnect to pc, so i cant get live services. However there seems to be a version now, where i just need to activate the phone.
If someone uploaded their data, can i download it, and update my wp7 that way?
yes put the new sdcard and restar to factory values
Bareslehm said:
so if we can move a wp7 from one sd card to another. Should it then not be possible to download from the internet, and just copy to sd-card?
Reason i ask is because i cannot get my wp7 to connnect to pc, so i cant get live services. However there seems to be a version now, where i just need to activate the phone.
If someone uploaded their data, can i download it, and update my wp7 that way?
Click to expand...
Click to collapse
i was under the impression that it uses some sort of RAID over the card.
the best way to tell is to copy the card factory rest with one SD card, then swap the cards afterwards. Myguess is that it wont work the way you want it too, i doubt it will "give" you everything back on again.
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Bambam01 said:
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Click to expand...
Click to collapse
I recommend just writing an image file with winimage. Then writing it to a 8gb card, then using Easeus Partition manager to expand the last partition to full 8 gb.'
Do you boot from the SD card or eMMC?
If it's the latter, just copy the contents of the old card to the new one.
If it's the former, I recommend a fresh install; use a backup program (MyBackup, Titanium Backup) to back up your Apps and Data and then restore when you're done with the fresh install.
I'd like to do this as well.. in response to previous reply.. there are 4 partitions (boot, 2 other and last one with your data) do I have to create 4 different images with winimage or just for the first boot partition or does the winimage creates the image of the whole msd card?
The winimage will create a 4 gb image of your card on the 8 gb cards including existing partitions. What you'll need to do is get the largest partition to expand to the whole card. Assuming that the 4gb install on SD is the same as an 8 gb install if you did it fresh.
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Phatdawg said:
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Click to expand...
Click to collapse
That's a good point, the Size-agnostic SD installer uses different partition sizes for everything except the boot partition depending on the size of the card.
I tried winimage first to see if it even worked. Which it didn't. I didn't try to expand the existing partition. It just booted as a normal nook. You would think this would be a easy process but.... Lol, always new challenges. Guess that's why I enjoy doing this.
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Bambam01 said:
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Click to expand...
Click to collapse
I have done this several times, and I recommend downloading easus todo backup free. Then place both sdcards in a card reader, run todo backup and just copy the 4g to the 8g and expand the fourth partition right there in todo.
This applies especially if you want to copy to same size sd's, as you will not run into the usual image sizing issues.
Hope this helps
I don't know what you're doing wrong. before expanding the partition, make sure the sd boots, if it doesn't, then there's a problem with image being read or written as opposed to the partition.
I also had a problem with a new SD card not booting that I fixed by using the nook (that is the core nook OS) to reformat the card, then put the image onto the SDcard (shouldn't have changed anything as far as I know, but it did anyway).
Ok I tried this and it worked flawlessly. Used win32diskimager to "read" my 4gb sd with cm7 image. and then used "write" to 8gb sd card. It cloned 4 gb original image with 4 partitions and one unused partition of 4 gb. After that used easeus partition manager(latest version) to format unused pattition to fat32 and then merged with last partition of 2gb (move/resize) ..so now I have 6 gb of data partition which i can use to transfer files or move apps from nook's internal drive. The new 8gb card with cm7 image booted without any issues keeping my original settings of 4gb. One thing to mention that somehow it did not work on one pc with windows xp (kept getting write error on win32diskimager program)but worked on my laptop with windows 7.
That is exactly how I have done it in the past as I described in my first post. I don't know why a person would have trouble with it unless there was a format issue (i.e. ntsf, etc).
Hi, Iv'e just ordered a 16gb sd card to replace the 2gb card I am currently using and was looking for some advice on how to copy over the contents.
I'm currently running miui with a 500mb ext on the card, having looked around the forums I have seen that I can change cards by backing up using recovery, creating ext on new card then copying contents over to new card and doing a restore.
The problem I have is that the last time I did a backup/restore using CWR it simply reinstalled the ROM as a fresh install and I lost all data and apps, so I am reluctant to do this.
My question is, can I simply create an ext on the new card and copy over the data from the old cards ext and does it matter if the new ext is bigger than the old one?
rosso22 said:
Hi, Iv'e just ordered a 16gb sd card to replace the 2gb card I am currently using and was looking for some advice on how to copy over the contents.
I'm currently running miui with a 500mb ext on the card, having looked around the forums I have seen that I can change cards by backing up using recovery, creating ext on new card then copying contents over to new card and doing a restore.
The problem I have is that the last time I did a backup/restore using CWR it simply reinstalled the ROM as a fresh install and I lost all data and apps, so I am reluctant to do this.
My question is, can I simply create an ext on the new card and copy over the data from the old cards ext and does it matter if the new ext is bigger than the old one?
Click to expand...
Click to collapse
do a full cwm backup
partition the new card
copy all fat32 part contents onto new card (be sure you have unhidden all files and that you get everything)
card into phone, dont let the rom boot go straight..
..into cwm
backups/restore
advanced restore
restore sd-ext
reboot
no need to wipe teh rom and reflash or full restore, , only teh sd-ext.
samsamuel said:
do a full cwm backup
partition the new card
copy all fat32 part contents onto new card (be sure you have unhidden all files and that you get everything)
card into phone, dont let the rom boot go straight..
..into cwm
backups/restore
advanced restore
restore sd-ext
reboot
no need to wipe teh rom and reflash or full restore, , only teh sd-ext.
Click to expand...
Click to collapse
Thanks for that mate, I will try it when my card arrives tomorrow
Nice i needed to know this to 2gb is to small for a sens 3,5 ROM
Tried all the above.
I couldn't get in to CWM again. It worked when I installed my Hyperdroid ROM via SD.
I reflashed CWM, now my NAND android was gone!
I reflashed it, and it works now, but still it sucks balls.
hello everyone, i backed up my files using the CWM recovery, this may seem like a simple question (im a noob) but where do the backed up files go? i do not see them on my sd card or on the nook (built in memory) can i delete the backed up files? or get to them? Also a member here told me to buy 2 sd cards is a good idea, one with all the info and the other empty for apps and music so i can keep the sd card in the nook without it going to CWM everytime i boot, but if i buy a new sd card do i need to format it? or just use it out of the box and into the nook, will my apps still work since the new sd card is empty and my files?
Android311 said:
hello everyone, i backed up my files using the CWM recovery, this may seem like a simple question (im a noob) but where do the backed up files go? i do not see them on my sd card or on the nook (built in memory) can i delete the backed up files? or get to them? Also a member here told me to buy 2 sd cards is a good idea, one with all the info and the other empty for apps and music so i can keep the sd card in the nook without it going to CWM everytime i boot, but if i buy a new sd card do i need to format it? or just use it out of the box and into the nook, will my apps still work since the new sd card is empty and my files?
Click to expand...
Click to collapse
Always format new cards. And never use Windows format. Use this. A freebie. Windows format can corrupt uSD.
Your nandroid (CWM) backup will be in the Backup folder in the ClockworkMod folder. It should be on your uSD.
One uSD is enough as long as it's large enough to hold all you want to use. I've always used at least a 16Gb card. Always name brand (SanDisk). You really don't want to swap back and forth. As long as your nandroind is on removable memory you should be safe. Some people copy their nandroind backups to their desktop computers for safe-keeping. A bit OCD but not really a bad idea.
Ok very good info! But I use the nook color and I do not think I need to format the sd card?
HTC Wildfire S (VM) "s-off" "rooted" Stock Rom
If you use the uSD as flashable CwMR, then you wouldn't want to reformat the card, otherwise, you have to recreate it once again if you want to do a backup or install.
what i mean is my new sd card do i put it in my nook and format it thru cyannogen mod setting? says umount and format sd card, cause if i put the same CWM on the new sd card everytime i boot it will take me to cwm
Android311 said:
what i mean is my new sd card do i put it in my nook and format it thru cyannogen mod setting? says umount and format sd card, cause if i put the same CWM on the new sd card everytime i boot it will take me to cwm
Click to expand...
Click to collapse
Others have formatted their uSD cards in their NC's but as a general rule I don't. I know I sound like a one-trick pony but one needs to start with a good formatted card otherwise everything else is for naught.
The reason I ask is because I don't want to keep pulling out my SD card everytime I turn my nook on, so if I were to format the new SD card how would I do it?
HTC Wildfire S (VM) "s-off" "rooted" Stock Rom
Either you confuse about CwM uSD or I (we) do not fully understand your issue.
1. If your uSD is a flashable CwM Recovery then it WILL BOOT into CwM Recover EVERY TIME you boot up with that uSD card plugged in. That's the way it is
2. If your uSD is for normal usage, you should NOT have any problem leaving the uSD card in the NC when booting up.
sorry i should have better explained, ok i get it now, my question in simple form is do i have to format the new sd or just simply pop it in the nook and go