Question about recent Recovery Images - myTouch 3G, Magic General

Okay, so I have used four recovery images since I have had my G1 and now the myTouch 3g. Two from Cyanogen when I had my G1. When I rooted my MT3G I had Amon_Ra's 1.2.0G and 1.2.1G. Today I flashed Twisted's Recovery Image. Both Amon's and Twisted's give the option to partition your memory card (Fat32, Ext2, and Linux-Swap). I love that because it makes things so much easier. Well, getting to the point of this thread. Are there any recovery images that format just the ext. part of our memory cards? Is that even possible? I ask because I flash different ROM's every few days and I like to wipe my ext3 to give it a fresh start for each ROM. I know it's just a few codes through ADB, but I'm sure I'm not alone when I say I like to be lazy. That would make things so much easier. Thanks in advance for any feedback.

To wipe your ext3 data ..
Code:
adb remount
adb shell rm -rf /system/sd/*
adb shell rm -rf /data/dalvik-cache/*
This should be the last thing you do before you flash as it will stop stuff from working properly!
In case you need more information: Connect your device and type "adb shell" and then do "mount | grep mmcblk0p2", this will show you where your ext2/3 partition is mounted (mmcblk0 represents your sd card, and p2 is the second partition) :
Code:
# mount | grep mmcblk0p2
mount | grep mmcblk0p2
/dev/block/mmcblk0p2 on /system/sd type ext2 (rw,noatime,nodiratime,errors=conti
nue)
/dev/block/mmcblk0p2 on /data/dalvik-cache type ext2 (rw,noatime,nodiratime,erro
rs=continue)
exit

Related

Delete /system/sd

I've searched the forums to no avail.
My question is, how do I erase everything from my ext2 partition or the /system/sd? I don't want to delete the actual partition, I just want to clear everything on it.
Your help would be appreciated, Thanks :]
cd /system/sd
rm -rf *
or if rm -rf * not works, try:
rm-r *
when i want to wipe my ext2 but keep /system/sd all i do is
su
rm -r /system/sd/*
that seems to do the trick for me. ive been doing that alot lately since i been trying a bunch of different roms.
You can download lucid's auto script. theres any option that allows you to clean your ext partition

wipe doesnt wipe

I am using cyanogen recovery, but when I wipe to factory reset from the boot, deletes messages, settings but no the applications, so after boot, I have to set it up like new but has icons and even broken icons from old apps unininstalled. Maybe I messed up the recovery, any suggestion to wipe whole thing?
Thanks in advance
To do a complete wipe, you'll need to format the ext partition. Wiping the phone's memory doesn't completely remove everything.
Can I do it from the phone? or do I have to do it on the PC
You can do it from your phone
In recovery, go to the console:
mount -o rw,remount /dev/block/mmcblk0p2 /system/sd
rm -r /system/sd/*
reboot
AdrianK said:
You can do it from your phone
In recovery, go to the console:
mount -o rw,remount /dev/block/mmcblk0p2 /system/sd
rm -r /system/sd/*
reboot
Click to expand...
Click to collapse
after the first line I get
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: Invalid argument
/#
I noticed that after a wipe, I still had loccy's modified browser. Does wiping only delete information that wasn't part of the original flash?
looks like I dont have mmcblk0p2 in block
rodeohat said:
after the first line I get
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: Invalid argument
/#
Click to expand...
Click to collapse
Epic fail on my part guys >< T
hat line should be
Code:
mount -o rw,remount /dev/block/mmcblk0p2 /system/sd
uansari1 said:
I noticed that after a wipe, I still had loccy's modified browser. Does wiping only delete information that wasn't part of the original flash?
Click to expand...
Click to collapse
Wiping only removes apps and settings (stuff in the /data/ partition of the nand, Launcher.apk resides in the /system/ partition) so launcher will not be affected.
sorry, I cant spot the difference. After I type:
mount -o rw,remount /dev/block/mmcblk0p2 /system/sd
I get
mouting /dev/block/mmcblk0p2 on system/sd failed: Invalid argument
I got it to work by typing:
# mount -o rw /dev/block/mmcblk0p2 /system/sd
# cd /system/sd
# rm -rf /system/sd/*
altough it said that couldnt delete it because it was busy,
I rebooted it, wipe, installed the ROM and all apps were gone
Thanks for your help
One more piece of code to put it on my evernote for later
AdrianK said:
Epic fail on my part guys >< T
hat line should be
Code:
mount -o rw,remount /dev/block/mmcblk0p2 /system/sd
Wiping only removes apps and settings (stuff in the /data/ partition of the nand, Launcher.apk resides in the /system/ partition) so launcher will not be affected.
Click to expand...
Click to collapse
remount is only used on partitions that are already mounted, and I can't think of a reason why ext3 partition would be mounted in recovery .
after wipe:
Code:
busybox rm -rf /system/sd/*
Gary13579 said:
remount is only used on partitions that are already mounted, and I can't think of a reason why ext3 partition would be mounted in recovery .
Click to expand...
Click to collapse
Ugh, I copied and psted the old command then forgot to make the change removing remount!! *repeatedly bangs head against the wall*
Sorry for the confusion..but you seem to have sorted it out for your selves
uansari1 said:
I noticed that after a wipe, I still had loccy's modified browser. Does wiping only delete information that wasn't part of the original flash?
Click to expand...
Click to collapse
Wipe clears data and cache only!!!
It does not remove applications in /system/app nor in /system/sd/app
If you have internal apps, ie in /data, then those will disappear

[HOW-TO] Make Ext4 from Recovery Without Losing FAT32 Data

I've seen a lot of threads detailing how to create an Ext4 partition using Gparted but if you don't want to download the image and would rather do it all on your phone, here's how:
This entire procedure should take less than 5min so you can go back to messing with your phone in other ways.
REQUIRES:
CLOCKWORK MOD RECOVERY
ADB
FINGERS
I am not responsible for any damage done to your phone doing this process. =.=
1. Download the zip file provided.
2. Extract the zip file to the same folder you have ADB in. (You should now have a folder named ext4 in the same folder you have ADB)
3. Reboot the phone into MAGDLR. Then select the option to boot into the recovery.
4. Make sure that /system/ is mounted using the option to mount partition in Clockwork Recovery.
5. Open a command (cmd) prompt and cd into your folder with ADB.
6. Run these commands in the command prompt. (Commands are in BOLD)
adb push ext4 /system/etc/
adb shell
parted /dev/block/mmcblk0
print (make note of the total size of your partition here)
resize 1 0 xxxx (where xxxx is the size you want for your FAT32 partition. It should equal total size of your partition that you gleaned from print minus 1024 for the ext4 partition you're about to set up)
mkpartfs primary ext2 xxxx yyyy (where xxxx is where your previous partition ended and yyyy is the total size of your sdcard)
.... (Let it do its thing. Shouldn't take more than a minute)
print (Make sure that everything is correct: You have a fat32 partition running from 0 to xxxx and an ext2 partition running from xxxx to the total size of your partition)
quit
Now to utilize the two files we previously pushed to /system/etc/
chmod 777 /system/etc/tune2fs
chmod 777 /system/etc/e2fsck
/system/etc/tune2fs -j /dev/block/mmcblk0p2 <- You now have ext3
/system/etc/tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2 (Note: CAsE SEnSitiVE)
/system/etc/e2fsck -fpDC0 /dev/block/mmcblk0p2 (Note: CAsE SEnSitiVE) <- You now have ext4
7. You can check that it's truly ext4 by:
parted /dev/block/mmcblk0
print (It should now read that you have a FAT32 and an ext4 partition.)
quit
You're all done! Now you have a 1GB ext4 partition for all your data and apps. If you know what you're doing, these same steps can be modified so that you have two ext4 partitions if you'd like. You can also alter the size of your ext4 partition to something smaller if you don't have that many apps to install or have a smaller SDcard (512MB should be sufficient in most cases, 1GB is slightly overkill IMO)
i will try with my HD2. I need more space to install app on sd not on phone. Thanks so much
Hi, I follow your instruction but when I get a "Permision deined" error when I type in the following commond
/system/etc/tune2fs -j /dev/block/mmcblk0p2
Can you please help?
Many many thanks!!
justj said:
Hi, I follow your instruction but when I get a "Permision deined" error when I type in the following commond
/system/etc/tune2fs -j /dev/block/mmcblk0p2
Can you please help?
Many many thanks!!
Click to expand...
Click to collapse
Crap. I forgot a step. You have to type
chmod 777 /system/etc/tune2fs
chmod 777 /system/etc/e2fsck
prior to using those files. That should fix the permission denied error.
I've edited the OP to reflect the changes, thanks for pointing that out.
Thanks man
Thanks Bro I have successfully make ext4 and I am enjoying my new Rom
Using HTC Desire runnymede 5.0
Amazing. I will keep it for future reference, although I partitioned my SD with CWM recovery and Gparted.
What kind of partition is made when using CWM? I made a 1GB partition on my card that way, and it works great. But I've heard good things about having it as ext4. How does this guide reflect the fact that I already have an SD-EXT on my card that's not necessarily ext4?
Thanks!
please help
please help me i cant get it to work... its same with /system mounted and unmounted...not even one 3rd app is working for me on my win 7 64x when i want to create ext4 this is my last hope. card is brand new 8gb ultra speed its working fine so cant be problem there. it seems like chmod 777 will delete that file..
Code:
C:\Users\OgziR\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>adb
push ext4 /system/etc/
push: ext4/tune2fs -> /system/etc/tune2fs
push: ext4/e2fsck -> /system/etc/e2fsck
2 files pushed. 0 files skipped.
1573 KB/s (603400 bytes in 0.374s)
C:\Users\OgziR\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>adb
shell
~ # /system/etc/tune2fs -j /dev/block/mmcblk0p2
/system/etc/tune2fs -j /dev/block/mmcblk0p2
/sbin/sh: /system/etc/tune2fs: Permission denied
~ # chmod 777 /system/etc/tune2fs
chmod 777 /system/etc/tune2fs
~ # /system/etc/tune2fs -j /dev/block/mmcblk0p2
/system/etc/tune2fs -j /dev/block/mmcblk0p2
/sbin/sh: /system/etc/tune2fs: not found
~ #
Hye... I have 2 question...
My phone is a HTC HD2 running an NexusHD2.ICS.CM9.HWA.V2.3 ROM... The cmd prompt cant seem so fine my device. Do have any advice on this???
Secondly, what do i do with the ext4.zip file??? I mean, do it extract it, or put in same folder with ADB??
Btw, i am Super Noob on this, so i apologize if my question offends anyone... 1000 apologizes...
OK, first of all, do you have adb installed correctly? If cmd prompt can't find your device that is the most likely problem.
As for what to do with ext4.zip, you need to extract it to your adb folder.
Sent from my Vivid 4G using xda app-developers app

[HACK] Grow your data partition

>>> Please note that Vashiru reworked this guide for reliability and alternate values, so I recommend you check his various posts in this thread starting with this one. <<<
Click to expand...
Click to collapse
THE PROBLEM
As many of us have noticed, it is fairly easy to get an "Out of space" message when installing apps on our phones because, for some weird reason, Oppo decided that the storage part of the device should linger in the dark ages, when /userdata and /sdcard were separate partitions and you only had 2GB of data storage, even if your phone was a 32GB model.
Now, imagine that you are running KitKat and would like to try ART. This may be a bad idea as, if your data partition is more than 30% full, you will find that while converting your apps to this new format, Android will run out of space.
At OppoForums, a few bright people started looking into the issue and, of course, there is a way to improve the situation.
WARNING!
If you follow the steps below correctly, you should not run in any trouble. If you do not, however, you may end up spending much more time fixing your phone.
FIRST, THE THANKS SECTION
Anders tinkered with his device’s partition table until he got to where he had grown the /userdata partition to something useable. Yes, it’s some people’s definition of “play”
Jousa11 is the first person trying to put a guide together explaining the steps to reproduce Anders’ work. WARNING: I did no get to see said guide as Jousa quickly deleted it due to the risks involved. So, take that in account!
Rockman for providing the last resort rescue tools in case you brick your phone
Lucky for providing the WiFi fix
Please let me know if you are not on this list and I forgot to give you credit!
YOU WILL NEED
The hardware:
An Oppo Find5 phone(!)
A computer (Windows/Linux/Mac) with adb installed and working
A USB cable
On your computer:
adb
[Optional] fastboot
On your phone (SDCard):
parted + mke2fs + tune2fs
mmcblk0p21_persist_ext4.img
openrecovery-twrp-2.6.3.0-find5-TP-patch.img
[Optional] gdisk
You will use parted to work on your partition table; mke2fs and tune2fs to create ext4 filesystems on some of these partitions (parted does not know how to create ext4 partitions)
mmcblk0p21_persist_ext4.img is an image that you need to restore your /persist partition and avoid issues such as non-working WiFi.
openrecovery-twrp-2.6.3.0-find5-TP-patch.img is a patched recovery image. I know: you already have a recovery image if you are going through these steps. However, we are going to wipe it so you want to install this guy before rebooting. Note that if you forget, you can always flash it later using fastboot.
On your computer:
adb to access your phone recovery, push files to SDCard, reboot...
[Optional] fastboot. You will only need fastboot if you mess up your recovery partition.
WHAT IF SOMETHING GOES AWFULLY WRONG?
You may “brick” your phone. Apparently it’s near impossible to hard brick your Find5, though. See below.
First, Anders recommends making a backup of your partition table. I didn’t because I felt that if I messed something up, it would be a partitions’ content rather than the partition table but that’s not the wisest approach.
Furthermore, if you are really worried about what stilly error your fat fingers will cause (I know I should be!) you can also backup your partitions.
Backing up your partition table:
On your phone:
Code:
gdisk -b /sdcard/gpt.bin /dev/block/mmcblk0
Backing up a single partition:
On your phone:
Code:
dd if=/dev/block/mmcblk0p<partition id> of=/sdcard/backup-<partition id>.bin
On your computer:
Code:
adb pull /sdcard/gpt.bin
adb pull /sdcard/backup-<partition id>.bin
LAST RESORT
OK. So, you've bricked your phone. Now what?
First, you will need Windows. So if you're on a Mac or Linux and have no access to a Windows machine/VM, er..don't brick your phone.
- Download drivers and tools
- Download and follow the instructions
READY ? LET'S GET STARTED
>>>>>>>>>>>> First, Download The Files <<<<<<<<<<<<
Then...
On your computer:
UPDATE As dixxa pointed out, mke2fs and tune2fs may already be present on your device. It was not the case for me but you should check first; it seems like a good idea to use existing binaries.
Code:
adb reboot recovery
adb push parted /sbin
adb push mke2fs /sbin
adb push tune2fs /sbin
On your phone:
Code:
chmod 755 /sbin/parted /sbin/mke2fs /sbin/tune2fs
umount /cache
umount /sdcard
umount /emmc
umount /data
parted /dev/block/mmcblk0
You are now in the parted shell.
CAREFUL! Do not delete any partition below 20 or you will enter "Big Oops" territory. I recommend typing carefully and, yes, staying away from copy/paste operations that may swallow a character like, say, the '2' in '20'
Note that the size value I am using here is '4GB' for /userdata (rather than 2GB). I guess you could make /userdata bigger than 4GB, in which case you would have to recompute all the offsets in the commands below(!)
Code:
# rm sdcard
rm 29
# 28 thru 23 are reserved
rm 28
rm 27
rm 26
rm 25
# rm recovery
rm 24
# rm misc
rm 23
# rm cache
rm 22
# rm persist
rm 21
# rm data/emmc
rm 20
# now, re-create partitions but data is bigger
mkpart primary 1325 5421
name 20 userdata
mkpart primary 5421 5430
name 21 persist
mkpart primary 5430 5967
name 22 cache
mkpart primary 5967 5968
name 23 misc
mkpart primary 5968 5979
name 24 recovery
mkpart primary 5979 6012
name 25 reserve1
mkpart primary 6012 6019
name 26 reserve2
mkpart primary 6019 6028
name 27 reserve3
mkpart primary 6028 6062
name 28 reserve4
mkpart primary 6062MB 100%
name 29 sdcard
# exit parted shell
q
Let's create a file system on the partitions that require one. Note that I am formatting the SDCard using VFAT as, yes, EXT4 is a better FS, but it is also incompatible with Oppo's ROM and some apps may not require the proper permissions etc.
Code:
# Notes:
# -m 0: no reserved blocks
# -c 0: no max mount count
# -C -1: no mount count
# -i -1: max_int interval between checks
mke2fs -t ext4 -m 0 -L userdata /dev/block/mmcblk0p20
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p20
mke2fs -t ext4 -m 0 -L persist /dev/block/mmcblk0p21
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p21
mke2fs -t ext4 -m 0 -L cache /dev/block/mmcblk0p22
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p22
# Hey look it’s an ext4 SDCard!
mke2fs -t ext4 -m 0 -L sdcard /dev/block/mmcblk0p29
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p29
# Actually to avoid errors like unable to write to root of sdcard:
mkdosfs -n sdcard -F 32 /dev/block/mmcblk0p29
mount -t vfat /dev/block/mmcblk0p29 /sdcard
At this point, we have clobbered the /persist partition and this could cause issues as mentioned earlier. Let's restore it.
Code:
# Restore /persist partition
mount -t ext4 /dev/block/mmcblk0p29 /sdcard
# On computer
adb push mmcblk0p21_persist_ext4.img /sdcard/
# On phone
dd if=mmcblk0p21_persist_ext4.img of=/dev/block/mmcblk0p21
IMPORTANT! Flash your recovery partition now. If you wait until after rebooting, you will need to use fastboot instead.
Code:
# Recovery partition: on computer
adb push openrecovery-twrp-2.6.3.0-find5-TP-patch.img /sdcard/
# On phone
dd if=openrecovery-twrp-2.6.3.0-find5-TP-patch.img of=/dev/block/mmcblk0p24
Admire your work
Code:
parted /dev/block/mmcblk0 print
Reboot into your new recovery and install your favorite ROM
FAQ
Q: Is this dangerous?
A: Yes. Yes, it is.
Q: Any tip?
A: Yes. Follow these instructions carefully and if something wrong happens, unless you know what you are doing, leave your device alone and come here to ask for help.
Q: Can I hold you responsible for any damage to my phone/etc?
A: As usual, the answer is 'No'
Q: I found an error in your write-up!
A: Please let me know immediately.
-Chris.
You should probably use the latest TWRP 2.6.3.1 found here: http://techerrata.com/file/twrp2/find5/openrecovery-twrp-2.6.3.1-find5.img
Looks good to me. Just be very carefully doing this.
Sent from my Find 5 using xda app-developers app
gdisk -b /sdcard/gpt.bin /dev/block/mmcblk0
those commands need to be typed in recovery even that one ?
Yes although I imagine this particular command should also work when booting system.
Sent from my Find 5 using Tapatalk
This thread is fine the only problem here is with those 2 binaries: mke2fs and tune2fs
You don't need to push them or chmod them since they are already in the recovery
Except that that thread is perfect.
Since we're at toying with partition, can't we merge the partitions in some way ?
Just wondering is there any way to build a script to do this in an automated way thus avoiding user errors and typos?
There is a thread on the oppo forums
http://www.oppoforums.com/threads/guide-resizing-internal-storage-on-find-5-32gb.8361/
Hello everyone,
is the guide for the 32 or 16 gb model?
I have 16 gb Oppo find 5.
Thanks.
PS: what "on your phone" is supposed to mean"?
Click to expand...
Click to collapse
If you don't know what does that mean don't do it you'll screw your phone.
hi
Please would you make something like this for oppo find 7a x9006?
thanks
Anyone willing to recompute all the offsets dor just one 16gb partition?
Scribed henceforth from thy G pad.
Hi all, I am trying to do this mod and I am half way through it with a problem
I am stuck on the new file system, I cannot use mke2fs or tune2fs, i get
Code:
mke2fs: not found
like it doesn't even exist, but it does I can see it. I get the same error for tune2fs. but parted and gdisk work fine.
Yes I did push them and chmod 755 them.. and I have tried running it from the /sbin directory.
Help!
Hello!
I'm getting the same error over and over again creating /dev/block/mmcblk0p21 to /dev/block/mmcblk0p22:
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p21
"Bad magic number in super-block while trying to open /dev/block/mmcblk0p21"
"Couldn't find valid filesystem superblock"
So i can't create a file system on the created partitions. I have been looking everywhere for an answer. Somebody have an idea?
U should just wait. Andrew dodd found a way to make find7a have unified partition and he claims he can make it work on find5 as well. Let's give him a bit to figure it out tho.
Scribed henceforth from thy G pad.
Gdisk not working...
Ok guys sort of a noob here... Firstly, totally appreciate what you guys are doing here... I wants it bad, thass why i'm here.
So far... I have i have done...
"adb reboot recovery"
"adb push gdisk /sbin"
I figured that's how you are supposed to install it ... hope i'm not wrong, but i guess it pushed through fine
But after rebooting to system in TWRP , i opened terminal emulator and when i use the command
"gdisk -b /sdcard/gpt.bin /dev/block/mmcblk0"
I get ...
"/system/bin/sh: gdisk: not found"
now i'm too scared to proceed without backing up the partition tables... so please help...
edit - FYI , i'm running the last build of Asylum Carbon... should i just go back to latest oopo stable stock rom and then root my device again and then try all this again... would that help... ???
Directly from Andrew Dodds g+ " IT HAS BEGUN.
The first phase of Find 7a/7s LVM testing is here.* See linked post for details.* (Sorry to disappoint, but the first phase is "make sure we don't break existing configurations")
Once this phase is complete, the remaining list is:
Fix up the remaining TWRP issues (make RECOVERY_SDCARD_ON_DATA runtime instead of compile-time)
Make user-friendly conversion processes
Once things are solid on Find 7, I'll work on Find 5 and N1."
Stay thirsty my friends. Good things ahead
Sent from my A0001 using Tapatalk
Does this work for the 16gb model?
Can someone help please?
I'm trying to do this, but after enter in parted [parted /dev/block/mmcblk0] when i try to do "rm 29", i get "can't remove 29: no such file or directory
I'm doing the "on your phone" commands in TWRP command line., is that correct?
I'm running stable colorOS 1.0.9i
Finally I finish the process.
My notes:
Goal:
Keep my current system intact (stable colorOS 1.0.9i , because i have no patience to format, install a new ROM and reinstall/recofigure everything
So I backup everything on phone with TWRP and I push sdcard content (wich include the system backup i made) with ADB
1 - If I push mke2fs and tune2fs IT WILL NOT WORK. I flash the last find 5 recovery (openrecovery-twrp-2.8.1.0-find5.img) and I dont push or chmod anyting, parted, mke2fs, tune2fs are all already in the recover and that's the only way I could run mke2fs and tune2fs
edit: 1.5 - The phone commands had to be enter via ADB shell. In TWRP command line, after you enter in parted it will not accept commands.
2 - To "rm 29", i had to "umount /dev/block/mmcblk0", otherwise "rm 29" fail due to partition in use
3 - after this instruction:
mount -t vfat /dev/block/mmcblk0p29 /sdcard
(the last one on the 4 block of code)
We have this:
# Restore /persist partition
mount -t ext4 /dev/block/mmcblk0p29 /sdcard
This instruction was the only one that give me a error, so I move to the next ones.
The error was that the partition was busy, what makes senses because in the last instruction we mount the same partition on the same folder but with different file system!!??
So I move to the next instruction. I have no idea if it's a instructions mistake but it looks like, because it says "# Restore /persist partition" but the command has nothing to do with /persist
4 - FINISH
5 - Reboot in recovery. Push sdcard backup to /sdcard. restore system backup with TWRP restore
Voila, my phone exactly as before but with 3,76GB for APPS. Finally!!! The "running out of space" message on a flagship quad-core 2GB RAM phone!!!!!!?????? Was driving me CRAZYYYYY
Thanks Fickx for the up to date information, I just did my re-partition successfully, here's what I did:
- Use Rashr update the recovery to twrp-2.8.1.0
- reboot into recovery
- connect to PC (Make sure adb works, "adb devices")
- on PC:
> adb shell
> umount /cache
> umount /sdcard
> umount /emmc
> umount /data
> umount /dev/block/mmcblk0p29
> parted /dev/block/mmcblk0
> rm 29
>...
> rm 20
> mkpart primary 1325 5421
> name 20 userdata
> ...
> name 29 sdcard
> q
> mke2fs ...
> ...
> mount -t -vfat /dev/block/mmcblk0p29 /sdcard
Open another PC command terminal
> adb push mmcblk0p21_persist_ext4.img /sdcard/
> adb push openrecovery-twrp-2.8.1.0-find5.img /sdcard/
Back to original terminal in "adb shell".
> dd if=/sdcard/mmcblk0p21_persist_ext4.img of=/dev/block/mmcblk0p21
> dd if=/sdcard/openrecovery-twrp-2.8.1.0-find5.img of=/dev/block/mmcblk0p24
> exit
> adb reboot recovery
Flash the rom.

Check internal storage for errors

In case this helps anyone, these are the steps I took to check internal storage for errors:
In Android, get the mount points for /data and /system
Code:
$ su
$ grep /data /fstab.qcom
/dev/block/bootdevice/by-name/userdata /data f2fs rw,discard,nosuid,nodev,noatime,nodiratime,inline_xattr,inline_data wait,check,encryptable=/dev/block/bootdevice/by-name/metadata
$ grep /system /fstab.qcom
/dev/block/bootdevice/by-name/system /system ext4 ro,barrier=1 wait
Boot to recovery (TWRP)
Unmount /system, just to be safe
(You can use adb shell or the TWRP terminal)
Code:
umount /system
Check /system for errors using e2fsck (since it's an ext4 filesystem)
(The mount points are a little bit different in TWRP)
Code:
e2fsck -fv /dev/block/platform/soc.0/by-name/system
In TWRP, go to Mount, check System, uncheck everything else
Check /data for errors using fsck.f2fs (since it's an f2fs filesystem)
Code:
fsck.f2fs -f /dev/block/platform/soc.0/by-name/userdata
Reboot
Or, you could just use any old Terminal app, do:
su
touch /forcefsck
... and reboot.
Tomo123 said:
Or, you could just use any old Terminal app, do:
su
touch /forcefsck
... and reboot.
Click to expand...
Click to collapse
I read that but it didn't work for me. Have you tried it on a Moto G 2015?
Tomo123 said:
Or, you could just use any old Terminal app, do:
su
touch /forcefsck
... and reboot.
Click to expand...
Click to collapse
... isn't / still part of the initrd, and hence volatile? afaik android doesn't pivot_root

Categories

Resources