hello everyone,
im having some trouble with my 32b vodafone magic. im hoping someone might be able to help me with.
i tried to update the rom to the jachero, but i didnt update the SPL first. now when i turn on the phone it just goes to the hero/htc splashscreen and keeps looping that. the phone wont load up fully.
i did some searches and found out that i could use the adb program in the android sdk, however when i load it nothing is showing in the devices list. i think this is because usb debugging is not enabled?
i can get into fastboot OK and cyans 1.4 recovery as well.
would it be possible for me to go into the console and type a command in there that would enable usb debugging? if so what do i need to type and how do i get the keyboard to appear in cyans recovery console in the first place? - (i have the usb drivers already installed on windows from the sdk)
other then that i was thinking i could just buy a micro sd card reader and copy the spl onto it that way and then update? and then update the ROM.
ive tried restore/wipe but that doesn't work for me either, i still keep getting stuck on the splash screen.
any help would be very much appreciated.
thanks a mill,
luke
hi again,
i thought id give some more info that might be of use, hopefully.
my current spl is 1.33.0004 and the radio is 2.22.19.26I
i tried using fastboot but everytime i try to flash a file onto the device i get remote: signature verify fail
thanks,
luke
hiyas, just a quick update, i went and got an sd card reader and updated the spl and then put the rom on it and its flying now.
Related
I have a friend who got a MyTouch 3G off of craigslist. It works great, but he saw what I did with my G1 and wanted to root it and all of that business. Well as simple as everyone seems to make it, I still had issues getting it rooted, but I think I got it done. I noticed it already had the Engineering SPL already loaded on it when he got it. I managed to get Amon_RA's 1.2.3 Recovery on it and flash CM4.2.7.1.
Here is the problem, His phone isn't recognized by ADB. I can boot into fastboot and it will recognize the phone, but I tried to update it to Amon_RA's 1.5 recovery through fastboot and it said "NOT ALLOWED". I know I have ADB and Fastboot setup properly because it works fine for my G1. What could be the issue keeping his phone from working.
Thanks in advance.
ccunningham83 said:
I have a friend who got a MyTouch 3G off of craigslist. It works great, but he saw what I did with my G1 and wanted to root it and all of that business. Well as simple as everyone seems to make it, I still had issues getting it rooted, but I think I got it done. I noticed it already had the Engineering SPL already loaded on it when he got it. I managed to get Amon_RA's 1.2.3 Recovery on it and flash CM4.2.7.1.
Here is the problem, His phone isn't recognized by ADB. I can boot into fastboot and it will recognize the phone, but I tried to update it to Amon_RA's 1.5 recovery through fastboot and it said "NOT ALLOWED". I know I have ADB and Fastboot setup properly because it works fine for my G1. What could be the issue keeping his phone from working.
Thanks in advance.
Click to expand...
Click to collapse
what spl does it exactly have?
Does adb work on your phone from that same pc?
Do you have all your drivers correctly installed?
He has:
The Engineering SPL 1.33.0006
PVT32B board
Radio 2.22.19.26I
When I plug in the phone it doesn't ask for new drivers and I even tried to update them manually with the newest SDK.
My phone works fine from the same computer. Fastboot recognizes both of our phones, ADB only recognizes my phone. When I try to flash a new recovery on his phone via fastboot, it says not allowed.
My phone is:
Engineering SPL 1.33.2005
PVT 32B
CPLD-4
Radio 2.2219.26I
might help
http://forum.xda-developers.com/showthread.php?t=595150
sitimber said:
might help
http://forum.xda-developers.com/showthread.php?t=595150
Click to expand...
Click to collapse
I tried that. Re-installing and updating ADB didn't work. Everything that works for my G1 doesn't seem to work for my friends MT3G. I also have a friend who has a stock Hero from sprint and his phone isn't recognized by ADB either.
Fastboot will recognize his device, but it won't allow me to flash his phone.
Good Morning,
I have been flashing a few different roms to find one that suit my needs however I have come to a problem - When I run the RUU it finds the device starts to bootloader on the device then very very quickly the device brings up a grey screen which says something like no image file (happens so quickly hard to read) then goes back to the tri-colour boot loader.
The PC then keeps trying for another minute or two and then says its lost connection.
I have tried using the Manual Boot Loader on the phone and putting the image straight to the msd card and running boot loader by vol - + Power but still nothing works
The last image I tried was the LIA (Can't remember which version - its at home)
I am currently running HardSPL 1.56.OliNex
On the Bootloader it also says this if it helps:
BLAC100 32M
MicroP-Blackstone (LED) v6
Also tried a Hardreset and downloaded official rom from the HTC website :-(
Anyone got any ideas?
Thanks.
Max
max_carpenter said:
Good Morning,
I have been flashing a few different roms to find one that suit my needs however I have come to a problem - When I run the RUU it finds the device starts to bootloader on the device then very very quickly the device brings up a grey screen which says something like no image file (happens so quickly hard to read) then goes back to the tri-colour boot loader.
The PC then keeps trying for another minute or two and then says its lost connection.
I have tried using the Manual Boot Loader on the phone and putting the image straight to the msd card and running boot loader by vol - + Power but still nothing works
The last image I tried was the LIA (Can't remember which version - its at home)
I am currently running HardSPL 1.56.OliNex
On the Bootloader it also says this if it helps:
BLAC100 32M
MicroP-Blackstone (LED) v6
Also tried a Hardreset and downloaded official rom from the HTC website :-(
Anyone got any ideas?
Thanks.
Max
Click to expand...
Click to collapse
Ensure that you put the .nbh and ruu file into one folder with no other files. Make sure you have named the file correctly, i.e. blacimg.nbh
Thanks for your advice. Got the Offical HTC Rom flashing back now.
Strange why the RUU didn't work though been working fine.
Just another quick note while this HTC Rom is flashing it says:
Radio_v2
Bootloader
Splash1
os
Does this mean I need to put Hardspl back on to do more roms as it mentions bootloader?
Regards,
Max
max_carpenter said:
Thanks for your advice. Got the Offical HTC Rom flashing back now.
Strange why the RUU didn't work though been working fine.
Just another quick note while this HTC Rom is flashing it says:
Radio_v2
Bootloader
Splash1
os
Does this mean I need to put Hardspl back on to do more roms as it mentions bootloader?
Regards,
Max
Click to expand...
Click to collapse
If you SPL states SPL: 1.56.Olinex then you do not need to re-use HSPL unless you are flashing a rom based on pre 1.54
Ok it didn't change the SPL so thats still ok -
However I can no longer flash new images from my computer using the RUU?
When ever I try it connects enters bootloader but then says No Flash Image. I have checked on the computer I have the RUU tool and the blacimg.nbh but nada.
I have tried roms that were working before. If I copy the blacimg.nbh to the memory card and use vol down + Power it works fine.
anyone seen that before?
max_carpenter said:
Ok it didn't change the SPL so thats still ok -
However I can no longer flash new images from my computer using the RUU?
When ever I try it connects enters bootloader but then says No Flash Image. I have checked on the computer I have the RUU tool and the blacimg.nbh but nada.
I have tried roms that were working before. If I copy the blacimg.nbh to the memory card and use vol down + Power it works fine.
anyone seen that before?
Click to expand...
Click to collapse
So you can still flash from sd card, but not using usb cable and pc method. I am assuming you still get 'usb' at bottom of bootloader before you try flashing. I was goingf to suggest maybe your .nbh file was corrupt but you stated you tried using ones which where previously successful so it can't be that. Are both the nbh and ruu files in their own folder with no other files? Try using ruu I've attached. Do you get any error codes?
I will give that RUU a go later once I have played with this rom for a bit.
Yes the RUU and the .nbh are in a folder on my local drive on their own - No antivirus installed
The same .nbh file works via the flash memory,
However the USB text doesn't appear on the boot loader anymore. When I run the RUU from the PC with USB attached with ActiveSync it auto loads the bootloader perfectly but from there no usb and it flashes to the grey screen abotu no flash image then back to the bootloader with nothing at the bottom.
max_carpenter said:
I will give that RUU a go later once I have played with this rom for a bit.
Yes the RUU and the .nbh are in a folder on my local drive on their own - No antivirus installed
The same .nbh file works via the flash memory,
However the USB text doesn't appear on the boot loader anymore. When I run the RUU from the PC with USB attached with ActiveSync it auto loads the bootloader perfectly but from there no usb and it flashes to the grey screen abotu no flash image then back to the bootloader with nothing at the bottom.
Click to expand...
Click to collapse
ok, reason flash fails is more than likely due to 'usb' not appearing at bottom of bootloader.
Various reasons for this:
First check that 'allow usb connections' is enabled in activesync connection settings and then see if 'usb' appears
Secondly, update usb drivers
Ok thanks I will note that although I think I have found a rom I am very happy with. So far seems to do everything I want and very stable so will see how it goes.
Just encase anyone is intrested its: Xnor 6.5 V1.4
I have yet to go through everything but so far so good....
same problem
hi I have same problem as OP.. did this get resolved??
dunno if this will help you but basically to flash it via usb the pc detects the phone as something else (not active sync or mobile center or whatever its called now).
so you need to have the drivers installed for that.
if you cancelled the driver screen or something the first time, then it will still be on your system as a nonfunctioning device the easiest thing to do is uninstall it from device manager.
then install the drivers as mentioned above and plug the phone in again in bootloader mode and wait...
it will take longer than usual because its the first time the driver is being loaded. then i think 'usb' will appear...
i had a problem like that after i reformatted my pc but this was ages ago
Hi everybody,
I just got my 1.5 cupcake Magic yesterday from SFR (Vodafone french carrier). I discovered it had a perfect-SPL and used both tuts found on this forum to get over it. First I made my goldcard then used id to fix the perfect-SPL. I followed everything step-by-step. Everything went fine and my phone went from a 1.5 cupcake Vodafone with Google french rom, to a HTC 1.5 cupcake english rom with non-perfect SPL.
Now I try to flash with a rom by Luo (at SmartPhone France forums) wich is based on Ion.
I installed the SDK on my XP Pro SP3 PC, and the drivers form the SmartPhone France wiki, when needed by XP with the Magic connected on USB Debug mode and Fastboot mode. My SDK Tools folder is on the windows PATH of course, and I put the Amon_Ra recovery IMG in it. The Luo rom ZIP file is at the root of my freshly low-formated FAT32 memory card, and the card is back in the phone.
When I start in Fastboot mode and then type the
fastboot boot nameoftherecovery.img command line on my PC, it says it's loading the file.
Then on the phone screen a tiny green progress bar fills up from bottom to top in the top right corner of the screen, when full, the phone vibrates briefly, then restarts, show me a magnificent htc magic logo and stays like that forever. I never get a chance to get to the menu that I need to wipe then flash.
I guess I'm not bricked since I can boot normally and access the fasboot, and not in perfect-SPL anymore, but hell yeah I'm in some deep sh*t and fed up already as it's been 24hrs I had my phone and can't use it ...
Any clues you pros ?
Thanks in advance !
Then on the phone
try turning it off for a while and then turn on, Otherwise try flashing one of dwangs roms.If you have the same problem as i do i cant flash any modified boot.img over 2MB it says write image error thus when you flash its not actually flashing the boot.img its using the one previously on the phone
The problem is solved. VincentjuanFR has followed the tutorial from AmonRA to disable a perfect SPL. But this tricks installs a 32A radio on the phone whereas he's got a 32B. Then, the recovery for 32B cannot boot.
he used the recovery for 32A to flash a 32B radio and then his phone was fine again.
I have an Htc magic already rooted and with clockwork recovery running cm6.0.0 I want to update it to a newer Rom, a fast froyo or fast Gb, all of the root work wasn't done by me, I don't know much about this particular device, anyway when I try to do a backup cwRecoverysays 0 Mb on sd card, Wich is not true, I think it may be a problem of the old version of cwRecovery (2.5) so I don't know what if the best method for changing just the recovery.
By the way this 32a is running spl 1.33.2010 and 3.22 radio
Anyone? anyone?
Anyway... I now understand how to flash the recovery without damaging the rest, I'm trying to use the tool that changes radios and recovery, but the phone wont get recognised in fastboot, when I plug the cable windows recognizes the device fine but when I type fastboot devices I get none listed, maybe it has something to do with the usb drivers I'm using windows 7x64
Hey there Community,
I really don't know much about mobiles, especially the HTC HD2 and flashing ROMs,
but somehow I got Android to work on my HTC HD2 1 year back and now wanted to sell my phone because I got a new one.
Therefore I needed to set up the factory settings and get Windows Mobile 6.5 back on my phone..
Unfortunately I failed hard while following the instructions of a tutorial that said I only needed to rename ruunbh to leoimg and put it on my SD-card and so on.
Halfway the update was interrupted and since then Iam getting "00028002 Not allow" error and can only boot to the bootloader saying "Upgrade ROM code error Please try again" And the usual things in the red disctrict and at the bottom it says that I got an USB-connection which seems to be wrong, because I can't see the device and so on.
I tried to install HSPL4 but it failed due to no USB-connection.
So what can I now do to make it work again? Iam really frustrated
Flashing image from sd is all good if it original correct country/vendor rom, if not you get your problem & things can be tricky as HSPL was replaced with standard SPL so care must be taken.
Either find a correct Vendor/country (CID) ROM for your HD2 or get it in bootloader & able to flash HSPL.
Would of thought for resale a good Android build would be more desirable.
I know what you mean, but the problem is that I just don't know what to do..
My phone is not branded or anything, so I couldn just go to htc.com and get me the newest winmo Rom?
The Problem is, what to do then, exactly?
It seems that I can't flash anything because I dont got usbconnection..
So no idea to original ROM country vendor !
usb connection may be due to driver issue on PC, install Activesync if on XP or WMDC 6.1 for Vista & Windows 7 then retry connecting hd2 via usb .
*Also make sure you know your version of HD2 & be aware of .51 radios killing US T-Mobile HD2s.
Try to flash 2.08.HSPL only (also in HSPL4). It is enough. You can also try these drivers to fix your USB connection.
And here you can find offical ROMs.
Drivers linked above are not suitable, install activesync or WMDC is best option.
Finding original ROM is not going to be easy if you have no clues to origin of handset ...
Also, just cost you don't "see" the phone from the p c doesn't mean you don't have a USB connection.... it will never show up in your drives list like it does when an os is running, and activesync (or wmdc) will also not see the phone when it's in bootloader.
If the phone shows "USB" (and your PC may even "ding" when its plugged in, that's all you can expect unless you look deeper,, into the hardware list, for example.
What does hspl line say?
I'd do....
Hspl4, choose 3.03.hspl (NOT 3.03.0000)
Flash unbranded 3.14 rom from USB
Report back.
I have same story - 00028002 not allow+no usb.
no one stock rom can be flashed.
completely lost and no idea what to do.