I just got my 8125, and i upgraded to the aku 2.2 rom and then i couldnt run any new programs for some reason, so i downgraded, and ran the lokiwiz/unlock tool, and then upgraded to the aku 2.2 rom again. and now im waiting for it to finish setting up. is that the correct way to usually do these upgrades? thanks for the help!
CID unlock is what allows you to install unsigned apps, as well as downgrade your ROM and use other vendor's ROMs.
thanks!
CID Unlock
Can you please tell me where you found / downloaded the CID unlock software?
Thank you.
Re: CID Unlock
jerebo said:
Can you please tell me where you found / downloaded the CID unlock software?
Thank you.
Click to expand...
Click to collapse
I recommend using lokiwiz 0.2b for CID unlocking. It's in the first post of this thread. However in order to use it, you must be using an AKU 1.x ROM. If you have already upgraded to AKU 2 then use the instructions here. However, if you have upgraded to an AKU 2.2 or greater ROM then there is currently no known way to CID unlock your phone. I hope this helps you a bit ^_^
I'm currently on Summiter's custom ROM 2.17.7.2 and assumed upgrading to this ROM confirmed that my device was CID unlocked.. I guess this is not the case, but will I be able to follow the instructions in the post above without issues because I am still below 2.2?
do you guys know what rom/aku/cid/whatever the cingular 8125 comes with? i'm going to buy one off ebay and am worried it'll be the latest craziest thing that loki wont be able to unlock. although i've read a lot of "it worked on my 8125" posts.
CIDunlock or Unlock or Both?
Hi People,
I've used the lokiwiz to unlock my phone. But the most important question is what is the difference between the options.
I first used the C to superCID my phone. Guess that worked.
After that also did a Unlock worked fine as well.
But what is the difference between Unlock and CID unlock?
is unlock for the SIMlock and cid unlock for other rom upgrades?
Is the CID unlock sufficient to CID unlock and Simunlock my Vario?
Menu looks like this:
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: U
Thanks in advance.
anyone tryed with aWizard1.3beta to CID Unlock Artemis?
I succeed with Herald to change German Rom.
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WWE Wm5 factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Help me please
Will foundling oneself such man which advise me with this problem ? whether oneself it will subject ? His HTC has to kill persons how much ? Does someone be able to this repair? How do to repair this ?
My HTC is brick. I it can not flicker rom, I it can not take off CID because I it can not him start. Whether someone can me to help or what I can they would make he he was lively.
I it can not flash rom by bootloader because do not it know from where from him download. It my HTC is from Danngard (Denmark) .
I ask help me. T - Mobile O2 Dopod - ROM do not it fit . INVALID DEVICE ID
Pinesio said:
Will foundling oneself such man which advise me with this problem ? whether oneself it will subject ? His HTC has to kill persons how much ? Does someone be able to this repair? How do to repair this ?
My HTC is brick. I it can not flicker rom, I it can not take off CID because I it can not him start. Whether someone can me to help or what I can they would make he he was lively.
I it can not flash rom by bootloader because do not it know from where from him download. It my HTC is from Danngard (Denmark) .
I ask help me. T - Mobile O2 Dopod - ROM do not it fit . INVALID DEVICE ID
Click to expand...
Click to collapse
You do need the factory rom for your device and then flash it from bootloader mode. Contact the dealer you bought your phone from or htc denmark.
ah for me too little too late.......... still waiting for an O2 rom the bloody bas*ards!!
Whoops!
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
agento said:
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
Click to expand...
Click to collapse
I'll buy it where do you live
agento said:
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
Click to expand...
Click to collapse
Its only truely bricked if the bootloader is damaged - if you can get into bootloader mode you can salvage with the factory rom.
meschle said:
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable and flash factory rom. You do not need to be activesynced to do this.
Click to expand...
Click to collapse
How do I flash the factory rom from here please?
arif101 said:
How do I flash the factory rom from here please?
Click to expand...
Click to collapse
Well you need the factory rom from o2 - o2 have not released it so there is a problem. I have not found any links to download this rom or a link to a dumped rom. I will ask others in the team if they know a link and let you know.
Did you manage to get into bootloader mode?
meschle said:
Well you need the factory rom from o2 - o2 have not released it so there is a problem. I have not found any links to download this rom or a link to a dumped rom. I will ask others in the team if they know a link and let you know.
Did you manage to get into bootloader mode?
Click to expand...
Click to collapse
Yeah the device goes into the bootloader mode. If you could find out where i can get the factory rom from that would be great. Also if i could have instructions how to upload the rom in the bootloader mode i would really appreciate it.
whats about the upcoming crossbow rom for the o2 xda orbit.Can that be flashed to from bootloader? or is the only way to get this repaierd to send it too o2?
TheGame1594 said:
whats about the upcoming crossbow rom for the o2 xda orbit.Can that be flashed to from bootloader? or is the only way to get this repaierd to send it too o2?
Click to expand...
Click to collapse
Yes if you have a uk o2 orbit and you flash the uk wm6 orbit rom it will be fine as long as you can still get into bootloader mode.
ok thx than i wait a few days for the rom and see if it work's
I have an original HTC P3300. How do I check if my device is CID locked?
I am currently running this ROM: PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
wakke said:
I have an original HTC P3300. How do I check if my device is CID locked?
I am currently running this ROM: PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
Click to expand...
Click to collapse
Unless you have unlocked you're device via imei check - you're device will still be cid locked.
meschle said:
Unless you have unlocked you're device via imei check - you're device will still be cid locked.
Click to expand...
Click to collapse
Is there any chance a tool will be released in the future which allow you to unlock your device for free?
I noticed that for other devices such tools are available.
wakke said:
Is there any chance a tool will be released in the future which allow you to unlock your device for free?
I noticed that for other devices such tools are available.
Click to expand...
Click to collapse
We hope so but none on the immediate horizon.
meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Click to expand...
Click to collapse
I flash my rom with wm6 buth it hangs after the update.
now it stops at the first screen. I can start the bootloader and see the usb on the bottom left screen but when i want to use the HTC P3300 WWE factory the solve the problem, i can 't connect via usb. is this because this is not the rignt ROM. I have this version on my artemis 1.12.406.1 9/12/06 FRE. Is there someone who knows where to find his version?
Another point, I've tried to put the nbh directely on my SD Card like explained on the wiki but nothing happens at all.
Please help.
htc p3300 Franch Rom
http://rapidshare.com/files/19995855/ART_HTCFRA_11240601_026790_FRA_SHIP.exe
Someone out there with a HTC P3300 German ROM ? I would be very pleased if someone could provide a link.....
Is anybody can tell me how can flash my dopod M700(ARTE300) just in bootloader wiht the CID locked.I have flashed SingaproeWM6 rom to my M700 with CID locked.Now.It doesnt work well.
Hi guys,
I'm a newbie. I purchased a XDA Orbit and want to know if the orbit is CID unlocked?
If the CID is unlocked, does that mean it will accept any other sim cards?
If my Orbit is unlocked does that mean I can put a new ROM on it?
Thanks in advance guys
I would like to know as well how to check whether it is a successfully unlocked device...
kukujiao said:
I would like to know as well how to check whether it is a successfully unlocked device...
Click to expand...
Click to collapse
When the device boots, see if SPL number is 1.11.0000.
If it is like that, then it's CID unlock.
Cheers
Hi there, I'am really new here,...just unlock my cid & the programmed indicated that it has been uncocked succesfully,....but the SPL during rebooting is 3.07.0000 so is my cid lock or unlock,.....pls advice....b4 I start flashing the rom.
Thanks,
Hulkv6tt
BUM!!BUM!!