(additional CHOWN notes added below. If you are getting "chown: unknown user/group system:system" read them!
Ok, we do have a WHOLE other thread that was made a sticky already, but you need to read the WHOLE thing to get all the properly interesting parts. I'll make sure I keep this OP up to date.
The following methods enable side loading and installing of apps onto the captivate, without the need of a program on a computer attached via the SDK. There are multiple methods, and for the most part, these methods that have worked flawlessly for many users here on this forum. We're just collecting them all in one post for speed and clarity.
Methods that assist in loading applications, without modification to the settings (a.k.a still need a computer attached) can be found at the collective wiki, http://samsungcaptivate.wikia.com/wiki/How_to_Sideload
ALL METHODS REQUIRE ROOT & BUSYBOX:
Root your phone, see http://forum.xda-developers.com/showthread.php?t=725555
Busybox : http://www.appbrain.com/app/stericson.busybox
Please, save a clean, un-altered backup copy of this file. To be safe. Rarely does corruption occur, but if it does, it won't be good.
Method 1: From Win7x64, Samsung Drivers, Android SDK installed.
This method uses the tools you already have at hand, as part of the SDK. All instances in code blocks are run inside of the command prompt. You will need to know where you installed your SDK, and the tools directory therein.
Once rooted, go install BusyBox installer from the App Market/AppBrain etc and run it. It will download and install the latest version for you.
From my Win7x64, with USB Debugging ON. Ensure that you phone is UNLOCKED as it the SU app will ask for permission for 'UNKOWN' in the following command.
Connect to PC, and Eject/Safely Remove the SD card, and "Turn off USB Storage" on the phone.
open command prompt, follow along:
Code:
> c:
> cd \android\tools
> adb shell
$ su
# cp /dbdata/databases/com.android.providers.settings/settings.db /sdcard/settings.db
# exit
$ exit
mount the SD cards to the pc,
"USB Connected select to... ", Mount
mine mounted as H:
Code:
> copy H:\settings.db settings.db
> sqlite3 settings.db
~> update secure set value="1" where name="install_non_market_apps";
1 row updated
~> .quit
> copy settings.db H:\settings.db
Eject the drive, safely remove, etc.
"Turn off USB storage" etc, to mount it back to the phone
Code:
> adb shell
$ su
# cp /sdcard/settings.db /dbdata/databases/com.android.providers.settings/settings.db
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> adb reboot
Bam. Done.
Method 2: with Root Explorer
(courtesy of kirbo20)
This is a pretty easy process. I went in to Root Explorer - dbdata - databases - com.android.providers.settings, copied settings.db to my sd card, edited it on my pc with a db editor changed 0 to a 1 next to non market apps. Copied it back to the original directory, rebooted and installed a non market app.
(added by gotfolk)
again using FF plug in..
Click Secure on the left pane
click on install_non_market_apps
click edit
number 3 states value click there and type in 1. hit ok
(/gotfolk)
Please use caution. If you want to make sure the db save properly open it on your sd card before you copy and replace the original. It should open up as a readable table. If it opens up in a txt editor its corrupt. This permanently enables non market apps. You can not toggle it on and off.
( This is a sqlite3 database file, you can find many GUI editors that will be able to handle the editing, including a FF plugin. Search "SQLite" )
Method 3: with Root Explorer & Sqlite Editor & Terminal Emulator
(courtesy of ice3186)
- Open Root Explorer
- Browse to /dbdata/databases/com.android.providers.settings/
- copy settings.db to the root of your sd card ( /sdcard/ )
- Click on the newly copied settings.db in /sdcard/, with SQLite Editor installed, you can open and edit it here.
- Select the "secure" table, and update the value of 'install_nonmarket_apps' from 0 to 1, and save.
- close out of SQLite editor
- copy the modified file ( /sdcard/settings.db ), and browse back to /dbdata/databases/com.android.providers.settings/ and paste
- confirm the overwrite if asked and then open again to confirm it's been changed.
- open Terminal Emulator
Code:
$ su
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# reboot
- reboot phone.
No PC, no Mac, no drivers, no SDK. Viola.
Method 4: Mac & Android SDK
You will see "[sdcard]" through this method...I don't own a Mac so I'm guessing a bit.
This method uses the tools you already have at hand, as part of the SDK. All instances in code blocks are run inside of the Terminal. You will need to know where you installed your SDK, and the tools directory therein.
Once rooted, go install BusyBox installer from the App Market/AppDroid etc and run it. It will download and install the latest version for you.
From a Max OS X, with USB Debugging ON. Ensure that you phone is UNLOCKED as it the SU app will ask for permission for 'UNKOWN' in the following command.
Connect to Mac, and Eject/Safely Remove the SD card, and "Turn off USB Storage" on the phone.
open Terminal, follow along:
Code:
> cd /android/tools
> ./adb shell
$ su
# cp /dbdata/databases/com.android.providers.settings/settings.db /sdcard/settings.db
# exit
$ exit
mount the SD cards to the Mac,
"USB Connected select to... ", Mount
mine mounted as [sdcard]
Code:
> cp [sdcard]/settings.db settings.db
> ./sqlite3 settings.db
~> update secure set value="1" where name="install_non_market_apps";
1 row updated
~> .quit
> cp settings.db [sdcard]/settings.db
Eject the drive, safely remove, etc.
"Turn off USB storage" etc, to mount it back to the phone
Code:
> ./adb shell
$ su
# cp /sdcard/settings.db /dbdata/databases/com.android.providers.settings/settings.db
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> ./adb reboot
Method 5: Android SDK only
Of course, this also requires root and BusyBox.
From the android sdk tools folder in a command prompt:
note: all linux/mac should use './adb' in place of just 'adb', and place quotes on the echo statement between echo and |
Code:
adb shell
su
chmod 666 /dbdata/databases/com.android.providers.settings/settings.db
exit
exit
adb pull /dbdata/databases/com.android.providers.settings/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /dbdata/databases/com.android.providers.settings/settings.db
adb shell
su
chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
chown system.system /dbdata/databases/com.android.providers.settings/settings.db
reboot
NOTICE
You must chown the settings.db file and reboot once it is back in its original location. If you do not, you will not be able to alter settings such as WiFi,GPS, default Ringtones, etc. It's also highly likely that you may wish to chmod to 660 (-rw-rw---), so I've tacked that in here and above.
Code:
> adb shell
$ su
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> adb reboot
Chown Note
In the event that you are getting "chown: unknown user/group system:system" please try 1000.1000 as this has been reported to work on several of the samfirmware-released roms that fail with this message.
Absolutely do not use someone else's settings.db unless you specifially make it a point replace android_id with your android_id!
Special Note
Any of these adb comments can be run from Terminal Emulator (Android Terminal Emulator, free) from the su command. I use the ADB here as it is a lot easier to type into. Terminal Emulator will provide you with a shell that is an exact match of the 'adb shell' command, as they both simply provide the shell to you.
Result:
After completing this process you will be able to load non-market apps directly from the APK files, SDK tools, tools such as DroidExplorer and apps such as APKtor.
You will be able to download the APKs directly, and then install from your favorite file browser (e.g. MyFiles(s), Astro(f), RootExplorer($)...)
Tools
SQLite Administrator (Win, GUI, no FF required) http://sqliteadmin.orbmu2k.de/
SQLite Manager (FF addon, search for it)
Application links
Root Explorer http://www.appbrain.com/app/com.speedsoftware.rootexplorer
SQLite Editor http://www.appbrain.com/app/com.speedsoftware.sqleditor
Terminal Emulator http://www.appbrain.com/app/jackpal.androidterm
BusyBox http://www.appbrain.com/app/stericson.busybox
bump.. settings.db people.. please read the threads!!
good stuff!!!
Ok. I can find settings.db with root explorer. i can copy it and i put it in my sdcard folder but nothing is there when i try to find it on my computer. Im trying to use SQlite editor on firefox. Im also on a powermac g4 if that makes a difference. I did download sqlite editor on my phone and I can find where to change the values for installing non market apps but when I change from a zero to a one it denies me. Please help
Ok, so let me make sure I have your process:
- Rooted
- Installed busybox ?
- Installed Root Explorer
- copied settings.db to /sdcard
-- cant see the file when mounted to Mac, thus can't edit with FF plugin
-- SQLite editor for android wont allow access..
(is this the SQLite Editor you used? http://www.appbrain.com/app/com.speedsoftware.sqleditor)
Try installing "Android Terminal Emulator" from the market (http://www.appbrain.com/app/jackpal.androidterm)
- open Terminal Emulator
$ su
# cd /sdcard
# chmod 777 settings.db
# exit
- Open the sqlite editor, and make the change
- back to Terminal Emulator
$ su
# chmod 660 settings.db
- proceed with rest of instructions.
how many more threads do we need on the same thing? We already have ALL of this info posted, several times.
designgears said:
how many more threads do we need on the same thing? We already have ALL of this info posted, several times.
Click to expand...
Click to collapse
Please read my initial post, first few lines. I explained why, specifically: Consolidation.
Thanks I will give it a try later today.
Sent from my SAMSUNG-SGH-I897 using XDA App
- OP updated to reflect stock ownership settings for 'chown'
Also, which sqlite app are you using? I'll put that up as method 3 if it works out nicely for you.
fixed a typo in the chown command.. bad copy paste.. bad.. doh.
added method 3 courtest of ice3186
added links to Root Explorer ($), SQLite Editor ($) and Android Terminal Emulator (free) and added the chmod/chown commands to method 3, as they were skipped by accident.
bump** for newcomers, sry.
thanks max for adding the third method. this was by far much easier than the first two methods. I have a hard time getting my mac to talk to my phone sometimes and it was good to not have to plug the lil guy in at all. Worked like a charm
myself and ice3186 are glad we could be of help
If I had accidentally deleted the settings.db how should I go about recovering my phone? Now I have the issue that my phone won't boot past the boot animation and I'm notbsure what to do
mkslt4 said:
If I had accidentally deleted the settings.db how should I go about recovering my phone? Now I have the issue that my phone won't boot past the boot animation and I'm notbsure what to do
Click to expand...
Click to collapse
Did you make any kind of backup before hand?
You may have to use someone else's settings.db and then do a factory reset.
Depending on how much you've done with the phone I'd suggest deciding on doing a the reboot process for rooting, but choosing to clear data. This may rebuild it, I am not sure.
my dbdata directory is empty.. My phone is less then 2 hours old and i have some market apps installed..
xetrev said:
my dbdata directory is empty.. My phone is less then 2 hours old and i have some market apps installed..
Click to expand...
Click to collapse
Oh, if it's running, then this folder isn't actually empty.
What are you using to browse this folder?
i followed this guide to a T yesterday when i did this. I used option 1, ADB commands on terminal since i'm a mac and it was super easy, did it in about 5 minutes.
this is just my opinion but i think everyone should try playing with the ADB commands, they're actually really useful and educational to know. and if you should brick your phone, just use clockwork recovery to restore it.
that being said, maybe you should add a disclaimer that when done on a mac, the adb commands require a "./" in front (so adb reboot becomes ./adb reboot). cp, chown, and chmod commands don't need it though (or at least i didn't).
See my previous post before in post#2
This is a simple batch file using ADB..
With this you can use ADB to manage your file or APK , Backup, Push Your File to device, or pull file from device..
ADB Work on Stand by Mode (Home Screen) or in Recovery Mode, just set it up..
Extract ADBTOOLSv1.0.1.zip and you will find :
command.bat : Windows Batch Command
_BACKUP_OUT : folder where your backup process done and made
_FLASHING_OUT:
folder for flashing your :
kernel (place your boot.img here)
recovery (place your recovery.img here),
modem (place your modem.bin here)--only for gt p7300
_MODDING_FILE: Folder where your file were created by PULL process
Folder where file for PUSH process should be here
_BATCH_INSTALL : place your APK here for batch install
tools: ADB.exe and busybox binary
success_APK : A folder created for All apk from _BATCH_INSTALL move here after instalation.
Click to expand...
Click to collapse
Notes:
ADB can access all file from device from CWM Recovery, especially CWMR 5.5.0.4
ALL you need to do is:
From Recovery menu, you need to mount /data and /system for ADB working..
THEN, From Command Prompt set ADB Mode to "recovery".(This Batch File set ADB mode to "Home Screen" by default)
So when you use ADB from Online device ( I mean a stand by device).. you dont need to change ADB Mode..
After you set up, you can use ADB as you like..
Code:
=============================================================================
:::: ADB TOOLS FOR GT P7300 and P7310 by suwandiapr
-----------------------------------------------------------------------------
| [*] Before use read this:
| --make sure you have installed adb drivers for your device
| --enable "USB DEBUGGING"
| from (Menu\Settings\Applications\Development)
| --enable "UNKNOWN SOURCES"
| from (Menu\Settings\Applications)
| --increase screen timeout to 10 minutes
| --connect USB cable to PHONE and then connect to PC
| --MAKE SURE YOU HAVE A ROOTED DEVICE AND BUSYBOX
| --Place the right file in the right folder
| --Some feature like Flashing need more tester..so please be aware
| --If you use adb recovery feature, set ADB Mode to recovery
| mount /data and /system from your device recovery
| --If you use adb from homescreen, set ADB Mode to HomeScreen
| --All you Do is your own Risk, use with carefull
-----------------------------------------------------------------------------
****Turn on the screen and allow superuser permission when asked!****
_____________________________________________________________________________
| Current MODDING FILE: NONE | ADB MODE :HomeScreen | sdcard path: /sdcard/|
=============================================================================
:::: ADB PULL ::::
=============================================================================
0 Pulling file from /data ( see result in _MODDING_FILE)
1 Pulling file from /system partition ( see result in _MODDING_FILE)
2 Pulling file from SDcard ( see result in _MODDING_FILE)
3 Backup recovery ( see result in _BACKUP_OUT)
4 Backup Kernel ( see result in _BACKUP_OUT)
5 Backup modem (for P7300 only-see result in _BACKUP_OUT)
6 Backup /system (tar format-see result in _BACKUP_OUT)
7 Backup /efs (tar and .img format-see result in _BACKUP_OUT)
8 Backup APK from /data/app (tar format-see result in _BACKUP_OUT)
=============================================================================
:::: ADB PUSH ::::
=============================================================================
9 Pushing file to /data ( from _MODDING_FILE to device)
10 Pushing file to /system ( from _MODDING_FILE to device)
11 Flashing recovery ( from _FLASHING_OUT to device)
12 Flashing Kernel ( from _FLASHING_OUT to device)
13 Flashing modem for GT P7300 ( from _FLASHING_OUT to device)
=============================================================================
:::: Setting ::::
=============================================================================
14 Set current working File ( for PUSH and PULL )
15 Install busybox on device (need root)
16 Set ADB mode (if you on recovery mode)
17 Install apk ( from _MODDING_FILE to device)
18 Install batch apk ( from _BATCH_INSTALL to device)
=============================================================================
:::: Reboot Menu ::::
=============================================================================
19 Reboot System
20 Boot Into Recovery
21 Reboot Bootloader
22 Quit
My previous post
inspiration from congox case
when you got a problem with bootlop and you forget make a nandroid backup
only have file from other ROM with flashable.zip and need to push the file from your computer to device
you have a recovery support with mount /system and mount /data (tested on CWM 5.5.0.4 and overcome CWM 5.1.2.6) and you can enter this menu while bootloop happen..
STEP 1 : MANUAL
Connect your device with computer
From device, Go to recovery - mounts and storage - mount /system and mount /data
From your computer go to adb terminal and type this
Code:
adb shell "ls /data/media/"
If you can see list of file from your device sdcard, so you make adb work for your device ..
Place your zip file on your path, says on C://backup.zip and you want to copy the file to /sdcard/download/ and type this code
Code:
adb push backup.zip /data/media/download/.
wait for copying progress done..
After you done with moving file to device sdcard, check content of your sdcard with this code
Code:
adb shell "ls /data/media/download/"
When you found your file from list, you can flash backup.zip from recovery
STEP 2 : WINDOWS BATCH FILE
I made a simple Batch File for windows (sorry i dont have MAC or LINUX distro) , this file will make a folder with name "emergency" in SDCARD and with your files inside that.
Extract the FLASHER.rar somewhere on your Local folder,example: on your " Desktop" Folder
in folder "FLASHER" you will find runme.bat and folder "files"
Rename your file ((flashable.zip files you want to send through ADB) to "backup.zip" and then Put your file into this path /FLASHER/files/myfiles/ (just replace the existing "backup.zip" with files from yours)
Connect your tab with Computer
Reboot into Recovery Menu from your device
From menu Mounts and Storage choose mount /system and /data
From your Computer go To Folder flasher and klik runme.bat
Follow the instruction on window untill copying process done and device reboot to recovery again (copying process will take a minutes depend on your file size)
Now you can flash a emergency ROM from recovery
Window instruction
Code:
-----------------------------------------------------------------------------
ADB EMERGENCY COPYING TOOL for TAB 8,9
created by SUWANDIAPR
-----------------------------------------------------------------------------
[*] This script will:
(1) COPY YOUR FILE FROM COMPUTER TO SDCARD/emergency/*
(2) CHECKING YOUR CONNECTED DEVICE DIRECTORY
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) make sure u have installed CWM 5.5.0.4 ON YOUR DEVICE
(3) connect USB cable to PHONE and then connect to PC
(4) Rename your Flashable .zip file with "backup.zip"
and place inside "myfiles" folder on your Computer
(5) from Recovery Menu, Choose "Mounts and storage" then
-mount /system and -mount /data
(6) CONNECT YOUR TAB WITH PC WHILE ON RECOVERY MENU
---------------------------------------------------------------
CONFIRM ALL ABOVE
Sorry for my Bad english, if there is somebody want to correct every words i use , im very welcome and will change with the proper words and sentence..
Hope this help someone..
Nice guide, thanks!!
I needed some help with mounting the system using adb through a batch file.
I use this command
adb -d shell mount -o remount rw /system
But the mounting fails (I have a rooted phone )
pleas help me I know this is off topic
2 possible reasons for this command to fail:
- /default.prop (on the phone) contains the following line: "ro.secure=1". Then you need another boot.img (in fact just a modified ramdisk). look for "unpack-bootimg.pl" or "unpackbootimage" you may find a guide how to do this manually (not too easy). A rooted kernel would also do the trick.
you can check your default prob with this command "adb shell cat /default.prop".
- in some cases mount requires more parameters. try "adb shell mount" and look for the line containing "/system". In front of system is the "device-name". in my case the mount command would look like this:
mount -o remount,rw /block/dev/mmcblk0p24 /system
hope this helps and sorry for answering off-topic questions....
nail16 said:
I needed some help with mounting the system using adb through a batch file.
I use this command
adb -d shell mount -o remount rw /system
But the mounting fails (I have a rooted phone )
pleas help me I know this is off topic
Click to expand...
Click to collapse
you can use busybox and call the binary from the shell
i assume that your device in normal mode ( in home screen)..
here some example..
Code:
su
adb push busybox /tmp/.
adb shell "chmod 755 /tmp/busybox"
adb shell "tmp/busybox mount -o remount,rw /system"
after you type "su" superuser will prompt a request, choose "allow".
glitschi667 said:
2 possible reasons for this command to fail:
- /default.prop (on the phone) contains the following line: "ro.secure=1". Then you need another boot.img (in fact just a modified ramdisk). look for "unpack-bootimg.pl" or "unpackbootimage" you may find a guide how to do this manually (not too easy). A rooted kernel would also do the trick.
you can check your default prob with this command "adb shell cat /default.prop".
- in some cases mount requires more parameters. try "adb shell mount" and look for the line containing "/system". In front of system is the "device-name". in my case the mount command would look like this:
mount -o remount,rw /block/dev/mmcblk0p24 /system
hope this helps and sorry for answering off-topic questions....
Click to expand...
Click to collapse
yes you right glistchi, samsung lock adb root on new firmware on my SG- Note..
And make me flash an older firmware for rooting..
new update
Never mind, got it to work
i want to push same file in data system (/data/data) but my tab is not root. can i??
if from cwm recovery, yes you can.. if from stand by mode (home screen) the answer is no... you need root to make it happen..
i got this error
please help
Looks like Root has been achieved as there is the following guide on AndroidGeeks.
I am not responsible if you try this, I am just passing along information.
How to root the Kindle Fire HD 7 by pushing SuperUser via ADB commands
1. Download the SU zip file from HERE.
2. Extract the contents from the SuperUser zip in a single folder on your desktop.
3. Go to the newly created folder and open the ‘system’ directory, then open ‘bin’ and copy the ‘SU’ file and paste it in the folder you’ll be working from. Then, open ‘system’ directory and then ‘app’ folder and copy the ‘SuperUser.apk’ file and paste it in the same folder as the ‘SU’ file.
4. Connect your Kindle Fire HD 7 tablet to your PC via the original USB cable. Open Settings app on your Kindle Fire HD 7 and then select ‘Security’ and now you need to enable the ‘adb’.
5. Go to the folder that contains the SU and the SuperUser apk files. Press and hold ‘shift’ key and at the same time right-click in the folder’s white space. Select ‘Open command window here’.
6. Now you will need to push the files by using the command lines below:
adb shell
rmdir /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
7. Your device will restart and the local temp file was removed and now you will have a false link to the whole data directory. After the device reboots you have to enter the following commands:
adb shell
echo ‘ro.kernel.quemu=1′ > /data/local.prop
exit
adb reboot
8. The Kindle Fire HD 7 will now reboot and you need to push the SU binary files. Enter the following commands:
adb shell mount -o remount,rw /system
adb push su /system/xbin/su
adb shell
chown 0.0 /system/xbin/su
chmod 06755 /system/xbin/su
rm /data/local.prop
exit
adb reboot
9. A new restart will be applied and now you can push the SuperUser apk file. Enter this final command line:
adb install Superuser.apk
10. That is it. You’ve finally flashed the root on your Amazon Kindle Fire HD 7 tablet.
If you didn’t manage to flash this tutorial, then you should ask for more help in comments.
Have a question or issue ? Ask it here !
JaxDomino said:
Looks like Root has been achieved as there is the following guide on AndroidGeeks.
I am not responsible if you try this, I am just passing along information.
How to root the Kindle Fire HD 7 by pushing SuperUser via ADB commands
1. Download the SU zip file from HERE.
2. Extract the contents from the SuperUser zip in a single folder on your desktop.
3. Go to the newly created folder and open the ‘system’ directory, then open ‘bin’ and copy the ‘SU’ file and paste it in the folder you’ll be working from. Then, open ‘system’ directory and then ‘app’ folder and copy the ‘SuperUser.apk’ file and paste it in the same folder as the ‘SU’ file.
4. Connect your Kindle Fire HD 7 tablet to your PC via the original USB cable. Open Settings app on your Kindle Fire HD 7 and then select ‘Security’ and now you need to enable the ‘adb’.
5. Go to the folder that contains the SU and the SuperUser apk files. Press and hold ‘shift’ key and at the same time right-click in the folder’s white space. Select ‘Open command window here’.
6. Now you will need to push the files by using the command lines below:
adb shell
rmdir /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
7. Your device will restart and the local temp file was removed and now you will have a false link to the whole data directory. After the device reboots you have to enter the following commands:
adb shell
echo ‘ro.kernel.quemu=1′ > /data/local.prop
exit
adb reboot
8. The Kindle Fire HD 7 will now reboot and you need to push the SU binary files. Enter the following commands:
adb shell mount -o remount,rw /system
adb push su /system/xbin/su
adb shell
chown 0.0 /system/xbin/su
chmod 06755 /system/xbin/su
rm /data/local.prop
exit
adb reboot
9. A new restart will be applied and now you can push the SuperUser apk file. Enter this final command line:
adb install Superuser.apk
10. That is it. You’ve finally flashed the root on your Amazon Kindle Fire HD 7 tablet.
If you didn’t manage to flash this tutorial, then you should ask for more help in comments.
Have a question or issue ? Ask it here !
Click to expand...
Click to collapse
thanks, but you realize this has been posted here twice with two different methods (manual and automated) right?
May as well add the link. This autmated way ensures that you won't mistype some lnyx command. (as they are so logical, and English-y) :silly:
http://forum.xda-developers.com/showthread.php?t=1893838
I used this method, and it worked for me.
ffs something always goes wrong
would appreciate help on the command prompt part
[GUIDE][7.1.1] Making The System Half-Writable & Convert The Apps To Be System-Apps
Okay. This is my first guide. My English isnt that so good. I tried something for my phone. I thought maybe it will helps you too.
HERE IS MY EASY GUIDE FOR UNINSTALL SYSTEM-APPS ON NOUGAT 7.1.1 VERSION 34.3.A.0.244 (AND ALSO MAKE THE SYSTEM HALF-WRITABLE?)(I DONT KNOW MUCH THESE SUBJECTS SORRY)
-Requires
- Version 34.3.A.0.244
- Magisked
- TWRPed
Note: Here is my TWRP and Magisking Guide Here Here Here
Installation
1. First Install
a. Android Terminal
b. Busybox By Meefik
2. Open Busybox and Install.
3. Open The Terminal Emulator. Its just like this
Code:
F5121:/ $
and type "su" just like this (NOT "Su", just "su" with little S)
Code:
F5121:/ $ su
press okay (on your keyboard)
Now this dollar symbol changed the like this #
Code:
F5121:/ #
That was First Step of terminal. Now the second step, type this command carefully
Code:
busybox mount -o rw,remount,rw /system
rw,remount,rw
-These are not dots, These are virgules.(commas)
Type and enter. If it doesnt give any error message just like this "mount: '/dev/block/bootdevice/by-name/system'->'/system': Device or resource busy" or something, congrats you did.
-Now you can delete your system-apps using Link2SD.
-But you cant still convert the u-apps to system-apps using Link2SD!
If you want convert user-apps to system-apps, use Root Explorer.
- User-apps located at root/data/app
- So cut the folder (wanted to convert system-app) from data/app
- Paste to root/system/app
- Restart The Phone
- I know this is manual guide for converting apps but it simple and easy.
(When some apps converted, maybe doesnt work. You have been warned.)
+thanks for the SoNyek for post
+commands from YasuHamed. Thanks. His guide is here