USB on PDA/Handhelds - P3400 General

hi guys !!!
It would be nice to be able to use standard USB devices on PDAs. Specifically USB thumb drives or usb keyboards etc.
i know this is not possible .but any one know about any trick or adopter like stuff ????
htc shift has usb ports but shift is too costly .
plz think guys!

i found this i want to do the same
http://www.smartphonemag.com/cms/blogs/30/add_a_usb_port_to_your_handheld

you can use, but the transfer of data will take a loooooooong time...
EDIT: Oh! I thought you were talking about using the device as a USB flash drive...

the idea is really gud but the problem is the amount of the battery that the USB device will use. In my opinion it will drain the batery very fast and that is not acceptable...
Positive side: Now the mobile manufacturing Cos acros the world have agreed to use 3.5 mm jack for audio and mini usb for data and charging related tasks...So i see a great future coming for mobile enhancements..
Who know if there will be USB cable also to connect two or more mobile in a network to share data or play games...
Or the mobiles will themselves be WiFi mini hotspots to play games in a classroom and/or campus

Related

av-out on wm5 possible?

hello all,
Is it possible to have av-out on my wm5 device?
I have an mini usb with on the other end a red and a yellow plug.
i've already tried to connect but it just doesn't work.
is there any application i can use so i can connect to my tv via av???
My phone is a orange M600 aka prophet with latest dopod rom.
TIA
rebelish, that is just not going to work. I mean that is not a PC usb port. First its a mini-usb, second its not got all the WinXP functions which enable it to be so.
What might be a solution is to have a SD Socket AV-out (haven't seen any), or even try it through wifi... There is a program (forgot the name) which transfers the picture to the PC through wifi, but probably does not work for video.
Cheers.
A.) most PDA USB ports are slave, meaning normal addons will not work on them
B.) there are indeed SDIO cards that provide a VGA/AV output
The only pda I've seen with video out is the Dell x51v. I'm guessing it's a fair custom job, using more than just a mini-usb cable.
ok Thanks everybody for all the clear answers.
I do think it's a shame that we don't have that function already in our pocketpc's but than again we can't have it all.
I think i'am going for the bluetooth pal adaptor now because with that one can do the job wireless and i can show my 2Mega pixel pics on my tv screen.
everybody thanx again
cheers

Windows Mobile USB host drivers.

The Xperia doesn't have host capabilities, but is it possible to get such functions with suitable drivers? Such drivers are discussed in this thread:
http://forum.ppcwarez.org/viewtopic.php?f=57&t=58813
As you can see they work with certain winmo devices. I wasn't able to make them work with my Xperia, but maybe one of you guys would be able to do it. Any other solutions?
PC
Not sure I'd bother really. What do you need to connect? If it's for storage just get yourself devices that take SD cards, then use MicroSD in adapters, then y ou can easily take it out and put it in the Xperia to copy stuff over.
Well, I guess I want my Xperia to have all sorts of capabilities. Imagine connecting an external DVD-RW drive and burning a couple of disks...... How about that !
I don't think linking to warez sites is within the rules..
if you have to it would be better to stick the relevant text in your post
Um.... the site may be for anything, but the drivers are freeware made by a poster on that site. I don't think it is against the rules, but if it is a mod should take the necessary steps.
The only reason that I could reasonably see for having a USB host to to accept USB pendrives for copying data to the microSD card. I can see 3-4 reasons why it wouldn't work, the primary one being that the USB port won't provide 5v/500mA to power the external peripheral.
Just a idea...
i have an idea which i like to share with You ...Imagine one small box with 4 ordinary aa mignon bateries inside and a card reader inside and a mini usb cable going out from that thing. Ok, now what we have here? Alternative charger for Your Xperia if You need it,some extra backup space for Your data and all we need is Usb host drivers on xperia. Advantages of this stuff is that everyone can make it, its a cheap solution,You can buy a batteries in almost every market and its just a basic idea so You can upgrade it as You need it. The fact is that we now have a power (5v/500ma) which we need for usb host. Please let me know what are You think of this and sorry for my bad English
Hm.... So the Xperia doesn't have a powered USB right? Can't this be changed by a software hack or something or is it hardware related? Is there a device that can be put between the Xperia and the external flash and that provides some form of power, like the one "Mrca" suggested above my post?
I would like posibilyty to conect usb stick.
now and then I trawel by ferry it takes abaur 12 h of doing nothing.
and just watching movies on phone.
so stick is perfect for video or music. my mini 8gb sd is full with other crap.
and by hqaving external power to usb it alsoo charges phone.
so anyone ?!?!?!
PLEASE USE THE SEARCH FUNCTION !
This has allready been discussed here :
http://forum.xda-developers.com/showthread.php?t=480899
and here
http://forum.xda-developers.com/showthread.php?t=411905
You should have a look to those other subforums of devices which feature the same chipset / functions.... ( Touch HD , Touch Pro, Touch Diamond etc etc etc )

[Q] MicroUSB to ethernet ?

I've an HTC Desire HD and can connect via wifi, I could connect via cable and tether a PC via the phones 3G signal etc However, I was wondering if, in the absence of USB connectivity and no wifi or 3G, would a USB to RJ45 cable be made to work? That is, having a wired ethernet connection to the phone's microUSB port. Obviously you would need an ethernet driver on the phone.
Now I don't have an immediate need for this, it's more a case of 'I wonder ...... '. I've read that USB host mode is not possible but not sure how/if that would negate being able to driver ethernet over the microUSB port. Anyone know for sure?
Ta
Dave
dvhttn said:
I've an HTC Desire HD and can connect via wifi, I could connect via cable and tether a PC via the phones 3G signal etc However, I was wondering if, in the absence of USB connectivity and no wifi or 3G, would a USB to RJ45 cable be made to work? That is, having a wired ethernet connection to the phone's microUSB port. Obviously you would need an ethernet driver on the phone.
Now I don't have an immediate need for this, it's more a case of 'I wonder ...... '. I've read that USB host mode is not possible but not sure how/if that would negate being able to driver ethernet over the microUSB port. Anyone know for sure?
Ta
Dave
Click to expand...
Click to collapse
I think the answer is not without usb host, and the cable would need to be more like a dongle with a nic in it.
Sent from my DROID2 using XDA App
mrkite38 said:
I think the answer is not without usb host, and the cable would need to be more like a dongle with a nic in it. ...
Click to expand...
Click to collapse
You're right of course. Doh ..... (on my part). But then you can get things such as this ... http://www.saverstore.com/product/2...NIC-1427-100--USB-to-RJ45-Network-connection- ... (first one I found - may be cr*p ).
Dave
I have seen this work using a Router with a usb port.
It requires a Linux router with enough guts to do it, Tommato/DD-WRT running, and one must fiddle with it. Essentially one uses the router to share the internet USB connection. It is probably the cheapest and most supported route.
LargePrime said:
I have seen this work using a Router with a usb port.
It requires a Linux router with enough guts to do it, Tommato/DD-WRT running, and one must fiddle with it. Essentially one uses the router to share the internet USB connection. It is probably the cheapest and most supported route.
Click to expand...
Click to collapse
That would be lovely though .. Ill try it later ...
Let us know how it goes.
Back in the day I had an HP iPaq that didn't have WiFi built in, but I could connect it to a wired network via a small adapter that functioned as a nic. Hypothetically you could find or fashion such a device to function over mini-USB, and then write some drivers to get it to share data with an attached computer. Just my 2c.
If you want to write drivers, you have a whole new level of complexity.
USB port of a router is a known cheap solution.
I'd have to second the OP's idea, as it does have merit. Hopefully the work on getting the USB Host working can show some results in the future....
However, I'm in the same boat, where I have a Nook Color running CM7 I use as a tablet, and an N1. I'm also on business in China a lot, and I prefer to use the NC in place of a laptop, although in some places wireless is flakey or non-existent. In those scenarios I'd rather not use the N1 as an access point using the 3G network to run data, as it adds up quick, even when using China sim cards.
It's these situations where a means to connect an android device to a physical ethernet is desirable, whether by USB or by wireless to a dongle.
This is the one device I'm testing out now is a CQR-980 from Cnet. You'll have to google it, because I can't post links.
The reason for this unit is it's size (its 3.52 (L) x 2.32 (W) x 1.06 (H) inches), and full support for setting up a secure wireless environment. If it works right, I will pre-configure it as an access point with WPA2, and it should be able to be plugged into any ethernet port in a hotel or otherwise, and I should get an IP on the NC or N1 via wireless.
If anyone else has found a better way to make this sort of setup work, would love to hear of it. The fewer devices I have to bring the better. Yet this is still better than dragging even a small laptop around.
I have seen this work using a Router with a usb port.
The Phone got to have specialized hardware to enable it to use just that USB to RJ-45 cable.
But in my experience, I could be wrong about it. Don't know what the R & D guys will cook up next.
This could make the job of having RJ45 connected to USB?
http://www.cnetusa.com/eng/CQR-981.php
Also this seems interesting:
http://www.euogo.com/usb-lan-adapte...to-rj45-adapter-for-android-tablets_p420.html
Will it work with an ASUS Transformer (Honeycomb 3.0)?
I have looked around a lot on the web for the MicroUSB to RJ45 Ethernet on a Droid, no luck. I have small hardware devices that have embedded configuration servers that are only accessible via TCP/IP Ethernet RJ45 ports and I normally use my netbook for that. I thought it would sure be cool to be able to access those embedded servers via my Droid2G for example, and get rid of the netbook. It seems like the phone can do almost everything else.
I've read about USB host mode etc, and the mini dongles with NIC's in them seem more promising, but I guess there has not been a big enough need for the guru's to go after it. Aparently it may available on the Android 3.x tablets but no able to backport to Android 2.x? Verizon will likely never upgrade my D2G OS.
dvhttn said:
You're right of course. Doh ..... (on my part). But then you can get things such as this ... http://www.saverstore.com/product/2...NIC-1427-100--USB-to-RJ45-Network-connection- ... (first one I found - may be cr*p ).
Dave
Click to expand...
Click to collapse
What if you used this but also used a usb extender so you could plug in the phone cable to the usb to rj45.? Then all that would be left would be the drivers.
With the exception of cybdroid's situation I think that a little wireless ap would work great. I have a little netgear wgr101 that works great.. you connect it to a rj45 port in the motel, and then wifi from the phone or laptop.
The reason i'm on this tipic, is I was thinking rj45 to rj45 on a copier. Then I can set same subnet, and ip range with a crossover cable(or ipx on on the copier). Then I wouldn't have to use a full laptop to troubleshoot...
now i'm not an apple fan but redpark has something for the i- series of apple products to do exactly what i'm curious about... you can check it on the tech journal.
Now that I spend some time reading and thinking, I might even be able to use my little wgr101 if i figure out a hosts file in the android os to direct traffic through the router. And, if I don't have to wear out the usb jack on the device, all the better.
I think I have my problem fixed, just went ahead a posted this as it might give someone else an idea. Might be a solution that even the op enjoys entertaining... I think op#2 and frayedends are on the right track.

[HW] usb and wifi broken

Hello,
I don't know if there is still some people here but I expose my problem.
As I have a Desire HD for more than a year, I wanted to give my magic to my sister but I also wanted to flash a new rom because the old CM did her time on this phone.
The problem is that the wifi and the usb are broken as I can't even charge the battery simply by plugging the usb cable. And with no electricity, there will be no file transfer.
Also, il work on a computer with no sdcard slot.
So there are 2 possibilities :
- I download everything with 3G (this should work with apps, but not for a rom)
- Repair the usb chip on the cellphone, and if possible the wi-fi too.
The second is my favorite, but is anyone know where to start this manipulation ?
(I have some skills in electronic and soldering).
Thanks for future replies

Connecting External Monitor to Z17

Hi,
Anyone tried connecting nubia z17 to an external Monitor? If so Please advice what usb type c hub or cable used, cause i have tried several but no luck.
anyone care to comment...
Hi all.
Just want expand on this.... This awesome phone is snapdragon 835... Along with all the other hardware..
Microsoft has already released the Windows 10 Arm OS.... Which has minimum spec of the snapdragon 835 processor. Very soon someone out there is going to be able to run full Windows OS to be able to dual boot. So we can go to our office and put the phone into type C hdmi hub and use it just like a desktop pc with external monitor with keyboard and mouse. By the way processor is powerful enough to run Microsoft word.. Excellent and all the packages we use on a day to day basis. Not only that it can run Adobe Photoshop. In design etc.
All I am asking at this stage is..... has anyone out there tried connecting the external monitor via the USB type C.... I have tried various hubs including mhl hdmi, the Samsung dex with no luck. Let's discuss the possibilities.
I searched many other forums and found that other phones having the same issue. The issue is that when usb type C is connected to the hub or hdmi cable the notification is says the phone is in charging mode only. It does not let me change to MTP mode. Tried going to developers mode "select USB configuration" and changing it but it does not change. This same problem is happening in many other phones. It may be many things but after reading many pages it may be.... The cable or hub or android 7 it self.
I think it's a matter of wait and see.... Unless of course someone has tried and it is working. By the way we are talking about WIRED CONNECTION and NOT wireless miracast. Please post your comments.

Categories

Resources