Hi,
Is anyone suffering from screen alignment issue that the original Touch Diamond had? I have the Touch Diamond and the phone constantly needs to be aligned during the day. Sometimes even after going through the screen alignment application, the phone stays completely misaligned. I've noticed changes in temperatures and putting the phone in my pocket create the problem. I want to change my phone to the Touch Diamond 2, but I want to know if the new phone still suffers from the same problem of the original Diamond.
Thanks,
I have never aligned my screen.. it works perfect
Related
My XDA Mini has a screen issue.
Only part for the screen (the middle) has stopped responding to the touch pad.
How do I fix this, has anyone else had it?
Cheers
Max
My Wizard (O2 XDA Mini S) has just developed this problem. The touch screen does not respond to touches around the middle of the screen. The outside edges of the screen work fine however.
I've had it for about 4 years now though, so I suppose its lasted well really. It's a G4 and I installed a WM6.1 ROM on it about 6 months ago (which is awesome btw, makes the phone sooo much better / faster!) but I don't think this is related to the problem.
Any known fix for this? I think it's a hardware issue since I also have the problem where upon opening/closing the keyboard, the screen goes white with multicoloured vertical lines and the phone emits a high pitched noise (have to put phone into standby then wake it up again to resolve). This, whilst annoying, I can live with, but not now the middle of the screen no longer responds to touches
I read somewhere its to do with the ribbon cable that connects the screen and main board, its gets trapped or worn over time as the keyboard is slid in and out. So I guess the touch problem is a more severe symptom of this? Can it be fixed?
Also a point of interest is that I keep the phone in the case a lot of the time. Could the magnets have possibly affected the screen? Anyone else with this problem keep the phone in its case a lot?
Thanks in advance,
Jamie
My dear fellow owners of a Blue Angel ppc. I've recently updated my Blue angel to wm6.1 by xplode and was having a weird problem. My screen was de calibrating at a very steady pace (around 1mm per day) and every time I tried to align my screen the touch screen simply friezed. I had to shut the device down and turn it on again in order to leave the align screen and the touch screen was functional again.
I tough it was a problem of the rom and posted my trouble in the topic of the rom. But since I'm not the kind of person that stays put waiting for other to solve my problem I went on a search trough the forum and found out that several other members of the forum where experiencing the same problem (on other devices) and the common thing on all of them was the installation of the cube/touch flo.
I started wondering if that was my problem to. So I uninstalled cube and the touch screen stopped responding. So I soft reset the device and the touch screen was working again (I just got a error message that the touch flo couldn't be started) and I was able to successful align my screen.
In resume:
Issue: The touch screen stops responding uppon entering the "Align Screen" screen.
Important considerations: do you have touch flo or cube installed?
Solution: If yes to question above, then remove the touch flo and/or cube from your device and the problem should be solved.
thank you for reading and I hope I was useful.
Be well!
I have the same problem, but my BA did not install any touch flo nor cube!
Cound it be any other reason?
Thanks.
Could you please describe your problem in more detail? What's your rom, why can't you align screen, etc.
Use a thin card!!!
I been using this once when I had the same problem. Use a thin card and swipe it between the keyboard and the main phone. Do it on top and bottom. During the time you do it yo will hear something like a clip sound. I think thats the screen calibrator, i don't know. but it works
Not bad if you try it.
ebautista said:
I been using this once when I had the same problem. Use a thin card and swipe it between the keyboard and the main phone. Do it on top and bottom. During the time you do it yo will hear something like a clip sound. I think thats the screen calibrator, i don't know. but it works
Not bad if you try it.
Click to expand...
Click to collapse
????????????????????
You must be kidding?!
No I'm not
marko_serb said:
????????????????????
You must be kidding?!
Click to expand...
Click to collapse
No I'm not kidding. Me and My Brother-in-law did that. We have the same device. I did it first after finding somewhere in modaco. He told me that it worked.
Ok I have had my Mogul now just over a year and I just had to replace it due to unable to receive incoming calls out of my home area. Come to find out after I received the replacement phone, it was my account that was the problem and not the phone. Anyway this new mogul I am having a terrible time with sensitivity on the touch screen (not using the stylus). My old one was great, loved the phone and had no problem what so ever. With this one it is random, but it seems like I have to press extremely hard on the touch screen to get it to register. Is there a way to calibrate the sensitivity of the touch screen? I know about the "align screen" under settings but is not working.
any help would be greatly appreciated.
Thanks....Tannerj
http://forum.xda-developers.com/showthread.php?p=2928549#post2928549
Every once in a while, the touch screen area at the bottom of the screen by the menu bottom is non reactive. for example when i touch n on the vk, it looks as if im touching h. Is anyone else going through this as well?
just recently my touch screen has problem. when i try to switch screen using touch screen, the screen get stuck half way and shaking. and every time the problem occur, i can't make a selection using touch screen. if i select an icon on the top row, an icon on the bottom row is selected instead.
I've had a few issues lie the two above. I'm not quite sure if it's a hardware of software issue, but resetting the device always seems to work just fine. It's not the best solution, but its better than nothing.
have you tried the VK caliberation tool?
Hi all,
I have replaced touch layer in my hd2 and buttons. Everything was great, but sometimes HD2 has very strange behavior. For example, Iam at home screen, just scrolling thru apps, when suddenly touch layer starts to recognize touches in upper part of display. This can happen even when I dont have any fingers on phone ... If I want to stop this I usually put multiple fingers on layer, or just go to lock screen. So Iam wondering if my touch layer isn't somehow broken, or if is there any short circuit or something else? Do anyone of you have same experience as me?
Thx for all tips