Tmobile G1 Won't Update - G1 General

I have tried every single ROM i could find and each one errors on me. Some errors i get are:
"Failure at line 1: run_program PACKAGE:check_prereq 124226890" and
"E:No signature
E:Verification failed".
I cannot get past the welcome screen because the touch screen died on me and everything is stock, I never rooted or manually upgraded. The phone was running real crappy so i did a hard reset and now its in a non working state.
Any help would be greatly appreciated

You can not flash a rom because your security is on since you are not rooted. The only thing that you can flash is an official provider rom. Download rc29 if you are in the us and rc7 if you are elsewhere, put it on the root of your sdcard, than enter the bootloader by pressing camera and power. That should set you straight. You can find the file you need by filing a link for rooting your phone, the file will be call dreaimg.nbh. once you do that you can just wait a day up to 3 for the ota updates or you can root your phone

evanz said:
I have tried every single ROM i could find and each one errors on me. Some errors i get are:
"Failure at line 1: run_program PACKAGE:check_prereq 124226890" and
"E:No signature
E:Verification failed".
I cannot get past the welcome screen because the touch screen died on me and everything is stock, I never rooted or manually upgraded. The phone was running real crappy so i did a hard reset and now its in a non working state.
Any help would be greatly appreciated
Click to expand...
Click to collapse
can you turn on the phone at least?
if not then its done for.
youre suppose to root to use custom roms

If it's not rooted then it is under warranty try TMo and HTC.

If your touchscreen is unrespondsive than you need a new phone
What good is a touchscreen that doesn't work?

I was only trying the OTA roms. I just ordered a new digitizer off ebay to fix the touch screen.

Ok well untill you fix that you are going to have a real hard time getting past the signing in, but for your issuse with the rom, follow my original instructions and that will get the orignal software back on your phone

Thanks for the tip, I got it back at RC29

Are you planning on rooting? If you're planning on sticking with the original T-mo ROMs, then you can find the link for Cupcake in my sig. Might as well upgrade it manually, as it can sometimes take weeks till you get an OTA update from T-mo.
I take it your touchscreen still isn't working? If that's the case, as long as the moisture damage stickers inside the phone are still white, you're still under warranty. If you're the original purchaser from T-mo, they will send you a new one. If you aren't, then you can still contact HTC and they will have you send it to them to replace any damaged parts. You only pay for shipping one way.

evanz said:
I was only trying the OTA roms. I just ordered a new digitizer off ebay to fix the touch screen.
Click to expand...
Click to collapse
you shouldnt have ordered a new digitizer. if your phone is still under warranty then take it to tmo or call htc. and make up a bogus excuse like u tried the ota and never booted back up.

my buddy in PA(I live in MN) sent me the phone because she cracked the digitizer and corrupted the rom somehow. All i have is the phone, i don't have any proof of purchase or anything. Would I still be under HTC warranty?

Related

[HOW TO] Steps to Take to Prepare a Rooted Phone for Warranty Exchange

I recently had to give up my rooted preordered Incredible for a refurb due to heat issues and reboot (loop) issues. For those looking for a guide as to what to do if you have to return your phone to Verizon and want to unroot. I welcome any comments to update/add to this information:
1) Make a NANDROID Backup if you want to simply port it over to your new phone
2) Mount your phone as DISK DRIVE
3) Walk the directories and delete any cached thumbnails of web sites you have visited
4) Copy any pictures you want to keep which were saved on the phone
5) Reboot into ClockWork recovery
6) Wipe the Dalvik Cache
7) Wipe the Data/Factory Reset
8) Go back
9) Wipe Data (main menu)
10) Power Down your phone
11) Remove your SD Card
12) Download one of the RUU's which are hosted around the web:
http://www.shipped-roms.com/shipped/Incredible/
13) Turn on your phone and plug it in to your USB
14) Run the RUU and let it do it's thing. When its done, so are you
15) If you have a screen protector, remember to remove it.
Any additions are welcome!
Yes it will revert everything back to normal, that's called an RUU btw
Cool
Anyone know if this also removes the more hidden data, such as the cached images of the web sites you have visited? In other words, if I run the RUU, is the phone ready to just be handed over?
if i root and uninstall some apps, will this restore my phone to stock and allow me to get all future HTC updates?
jdmba said:
Anyone know if this also removes the more hidden data, such as the cached images of the web sites you have visited? In other words, if I run the RUU, is the phone ready to just be handed over?
Click to expand...
Click to collapse
I don't think so, but it's easy enough to do a wipe and then apply the RUU (and hey, for the hell of it, you could wipe again).
Steps?
[deleted ... first post updated]
I'm pretty sure the RUU will completely wipe your phone. However, you can take giantcrazy's advice and wipe before running the RUU.
One more try
[deleted ... first post updated]
Ok, here is what you want to do.
there would be two things you need to un do before sending them back this phone.
make sure it says S-ON.
and then make sure you have stock recovery.
If you have these two things, your gold bod.
Probably to noob to know any better
After going through a lot of threads this one seems appropriate. I am looking for how to go back to stock DI. After Unrevoked3, ota leak and unofficial froyo leak, my DI wont connect to VZW anymore, all out going calls are busy. Talked to my VZW guys, they are cool with me, tried to help nothin'. Today tried Unrevoked forever and official froyo leak, still no VZW connection. I looked into this a lot before I tried these mods I don't know what went wrong, I would not have been able to do this with out such easy tools as are provided today. "I NEED HELP" to get back to stock, "PLEASE". I have looked into SDK and Adb, as I have been lead to believe there is no way to return to 2.1 and the right radio without these tools. At this moment I have not been able to find clear enough explanations on how to use these tools, this is where I maybe over my head. I assume my radio is fried, I don't care if no "S on", I just need those obvious things; version, kernel, baseband, to be stock. Any help will be appreciated, big thanks for any suggestions
A Lex and Er said:
After going through a lot of threads this one seems appropriate. I am looking for how to go back to stock DI. After Unrevoked3, ota leak and unofficial froyo leak, my DI wont connect to VZW anymore, all out going calls are busy. Talked to my VZW guys, they are cool with me, tried to help nothin'. Today tried Unrevoked forever and official froyo leak, still no VZW connection. I looked into this a lot before I tried these mods I don't know what went wrong, I would not have been able to do this with out such easy tools as are provided today. "I NEED HELP" to get back to stock, "PLEASE". I have looked into SDK and Adb, as I have been lead to believe there is no way to return to 2.1 and the right radio without these tools. At this moment I have not been able to find clear enough explanations on how to use these tools, this is where I maybe over my head. I assume my radio is fried, I don't care if no "S on", I just need those obvious things; version, kernel, baseband, to be stock. Any help will be appreciated, thanks
Click to expand...
Click to collapse
Ok, there is so much here I will do my best.
number one, having s-on is just as important as having a radio thats either 2.15x or 1.x, now that the OTA 2.2 update is sending out, you can send the phone back with 2.2 and 2.15x radio.
what you need to make sure of, is two things, you have s-on,
and you have stock recovery.
ACD168 said:
Ok, there is so much here I will do my best.
number one, having s-on is just as important as having a radio thats either 2.15x or 1.x, now that the OTA 2.2 update is sending out, you can send the phone back with 2.2 and 2.15x radio.
what you need to make sure of, is two things, you have s-on,
and you have stock recovery.
Click to expand...
Click to collapse
Thank you, and really they wont know if the ota was pushed to me? I found the S on tool, I didn't know there was one, I had only read on about S off. I don't know how to find/replace stock recovery, I will start searching though. Much appreciation, my better half is not as thrilled about my learning experience as I am.
I already rooted and unrooted once, will I get stock recovery back after unrooting?
A Lex and Er said:
Thank you, and really they wont know if the ota was pushed to me? I found the S on tool, I didn't know there was one, I had only read on about S off. I don't know how to find/replace stock recovery, I will start searching though. Much appreciation, my better half is as thrilled about my learning experience as I am.
Click to expand...
Click to collapse
Your welcome, I'm happy to see you are learning so quickly. S-on is very helpful for those warranty returns of the phone.
Verizon has no idea whether or not you got the ota, or better yet what version you have or if you are rooted, ect.
If you tell me what your hboot it, radio, software version, s-on or s-off, if rooted or not, and if you have the stock recovery or clockwork and I will try and guide you to where you want to be..
if you need help getting to the stock recovery this must mean you are rooted, and this can be achieved by downgrading the phone by un-rooting, I'd suggest running s-off while you are rooted, then
androidforums.com/incredible-all-things-root/99828-video-howto-unroot-incredible-downgrading.html
sorry can't post links yet,
to help you un-root and get that stock recovery back.
A Lex and Er said:
I already rooted and unrooted once, will I get stock recovery back after unrooting?
Click to expand...
Click to collapse
To find out real fast if you have the stock recovery or clockwork-mod recovery, boot into HBOOT, (power off phone, hold vol down and power til screen turns on) and then vol down to select recovery and push the power button I think to select and then if you get a red triangle that means stock recovery.
Also need to return phone
I just got off with Asurion and they are over nighting a replacement. I had rooted my phone, installed some root only apps like wireless tethering and set cpu, removed some bloat like CityID and Tweet/Peep, and changed the boot animation. No custom ROM or radio update.
Then I wanted to get the OTA update so I applied s-off and flashed back to stock recovery.
So what do I need to do to return this phone. I know I will need to apply s-on. Then should I flash a stock 2.1 or just revert the changes I made to boot animation, restore the bloatware, and remove the root apps? Do I need to remove any other files that go with being root?
Thanks.........MM
ACD168 said:
Your welcome, I'm happy to see you are learning so quickly. S-on is very helpful for those warranty returns of the phone.
Verizon has no idea whether or not you got the ota, or better yet what version you have or if you are rooted, ect.
If you tell me what your hboot it, radio, software version, s-on or s-off, if rooted or not, and if you have the stock recovery or clockwork and I will try and guide you to where you want to be..
if you need help getting to the stock recovery this must mean you are rooted, and this can be achieved by downgrading the phone by un-rooting, I'd suggest running s-off while you are rooted, then
androidforums.com/incredible-all-things-root/99828-video-howto-unroot-incredible-downgrading.html
sorry can't post links yet,
to help you un-root and get that stock recovery back.
Click to expand...
Click to collapse
Hello,
I wanted to thank you again for the help this last weekend. I apologize for not returning for more of the help you offered me. My wife only has every other weekend off and we have an 18mo. old son, both of whom deserved my time more than my DI. I love my DI but it wasn't giving me much love.
Although VZW isn't always the nicest to my pocket book, I have never been taken care of as well by any other provider(s) employees, thank you. As I mentioned in my first post, my VZW guys are cool with me. Yesterday I went into the store and the manager offered to help me. He managed to reconnect my DI to the network but no 3g's. He believes my problem is just a coincidence because he had another customer with a similar problem over the weekend, with no mod's. Still I need to exchange my DI, it doesn't look like 3g's is going to turn on.
My real issue is still getting custom recovery off and stock recovery back on, then unrooting will be a breeze. The videos you lead me to are one of the sources I have been working with, however to reverse the leaked ota, Downgrade leaked ota video, requires SDK and adb knowledge, this is where I am noob. At this time my VZW manager who is in school for programing is attempting to help me (he has a over clocked Palm Pre Plus, 1Ghz), this is very cool of him, well beyond what is expected. (I am in no way encouraging anyone to rely on their VZW employees for this kind of help, this is a unique situation, I have been building a relationship with my VZW guys for two years+, not all VZW employees have a clue about mod's, and mod's technically void the warranty) I am hoping to learn enough about these tools, SDK and adb, to help myself before the next time, and I will hopefully be gaining some of this knowledge from my friends at my VZW store soon. I will also be looking forward to the help I receive from fine people such as yourself and people in this community in future endeavors.
I will stop basically hijacking this thread now
Thanks to all of the people who support these community's, with out whom many of us would never get our foot in the door. Much appreciation to ACD168 for being there to help me.
Take the time and learn to do it right the first time.
A Lex and Er said:
Hello,
I wanted to thank you again for the help this last weekend. I apologize for not returning for more of the help you offered me. My wife only has every other weekend off and we have an 18mo. old son, both of whom deserved my time more than my DI. I love my DI but it wasn't giving me much love.
Although VZW isn't always the nicest to my pocket book, I have never been taken care of as well by any other provider(s) employees, thank you. As I mentioned in my first post, my VZW guys are cool with me. Yesterday I went into the store and the manager offered to help me. He managed to reconnect my DI to the network but no 3g's. He believes my problem is just a coincidence because he had another customer with a similar problem over the weekend, with no mod's. Still I need to exchange my DI, it doesn't look like 3g's is going to turn on.
My real issue is still getting custom recovery off and stock recovery back on, then unrooting will be a breeze. The videos you lead me to are one of the sources I have been working with, however to reverse the leaked ota, Downgrade leaked ota video, requires SDK and adb knowledge, this is where I am noob. At this time my VZW manager who is in school for programing is attempting to help me (he has a over clocked Palm Pre Plus, 1Ghz), this is very cool of him, well beyond what is expected. (I am in no way encouraging anyone to rely on their VZW employees for this kind of help, this is a unique situation, I have been building a relationship with my VZW guys for two years+, not all VZW employees have a clue about mod's, and mod's technically void the warranty) I am hoping to learn enough about these tools, SDK and adb, to help myself before the next time, and I will hopefully be gaining some of this knowledge from my friends at my VZW store soon. I will also be looking forward to the help I receive from fine people such as yourself and people in this community in future endeavors.
I will stop basically hijacking this thread now
Thanks to all of the people who support these community's, with out whom many of us would never get our foot in the door. Much appreciation to ACD168 for being there to help me.
Take the time and learn to do it right the first time.
Click to expand...
Click to collapse
First off, you are very welcome my friend, anything I can do to help do hesitate to ask!, and your not hijacking any thread brother, that's what these threads are for!!!
Thats real cool of the VZW employees!!
adb and sdk isnt that difficult I can help you!!
Read my post about warranty exchange.
I know alot of people are "better safe than sorry" mentality. but I have returned 2 phones that were fully rooted, updated, s-off running custom roms and I had no issues. in fact ive never had an issue using warranty exchange. ive exchanged phones that I broke (like broke.. with pieces coming off). I just call and tell the operator lady my phone doesnt work, i dont know why.. it was just working earlier and now it wont turn on.. they send me a new phone and I send back the broken one and everyone is happy.
They only confirm that the numbers on the phone match your account. Not the reasons you are sending it Back. the warhouse guy that opens your box isnt the same guy you talked to, nor do they have information about your phone call to the tech. They simply open the box, scan the numbers and move on.
dont stress to much about it
Great info here
Thanks to every one of you on this thread. I am finally breaking free from WinMo and getting Dinc after a lot of research. I like Verizon but hate the bloatware they pack onto Androids and all the other phones, so I will be fiddleing with ROMs. If I screw up I am looking here first to see how to get it back to stock so I can get my new one with the insurance coverage.
Everytime I get to serouosly looking around these forums I learn great new stuff. I will donate to the XDA someday soon!
Okay. so im a noob. Just need to ask. What do you guys mean by stock recovery? I just rooted my phone but need to unroot to send it in for work at Verizon. Could you help me out?

[Q] OTA 2.2.1 update manually

I am looking to download and installed 2.2.1 on my MT4G but I can't find a download link anywhere. I can only find 2.2. It tried to do a OTA but when it rebooted it never installed and when I pulled the battery an hour later it deleted the update on boot. I've performed *#*#checkin#*#* and it said succeeded but I still haven't had an update since. I don't want a custom ROM on this phone for a while since it's under warranty. I have a MT3G for that...
BTW, I did use the search feature for who ever was going to say use it, I even used this thing call Google. It was quite fascinating!
remijenkins said:
I am looking to download and installed 2.2.1 on my MT4G but I can't find a download link anywhere. I can only find 2.2. It tried to do a OTA but when it rebooted it never installed and when I pulled the battery an hour later it deleted the update on boot. I've performed *#*#checkin#*#* and it said succeeded but I still haven't had an update since. I don't want a custom ROM on this phone for a while since it's under warranty. I have a MT3G for that...
BTW, I did use the search feature for who ever was going to say use it, I even used this thing call Google. It was quite fascinating!
Click to expand...
Click to collapse
Call T-Mobile customer service and verify with them that the IMEI number they have in your account is the correct one. This is the number one reason for not getting the update. I had a phone for over a month and they never changed the IMIE # until I called. The IMEI is on your box or under your battery.
Please post questions in the Q&A section.
remijenkins said:
I am looking to download and installed 2.2.1 on my MT4G but I can't find a download link anywhere. I can only find 2.2. It tried to do a OTA but when it rebooted it never installed and when I pulled the battery an hour later it deleted the update on boot. I've performed *#*#checkin#*#* and it said succeeded but I still haven't had an update since. I don't want a custom ROM on this phone for a while since it's under warranty. I have a MT3G for that...
BTW, I did use the search feature for who ever was going to say use it, I even used this thing call Google. It was quite fascinating!
Click to expand...
Click to collapse
[GUIDE] Forcing update 2.2.1 and re-rooting after downgrading This was on the same page you posted.... have you by chance read it?
I'd recomend using the force method...I spent almost three weeks waiting on it after being put on a "push list", verifying IMEI, and other things. Some phones "won't update" for whatever reason and they will eventually tell you to swap it. I did the manual update from the thread linked above without issue after T-Mo was unable to resolve my issue and I wasn't willing to swap for a potential refurb after having to pay full $450 retail price on the phone.
I actually did read the post about forcing the update about I don't want to have to root my phone or turn S off. I'm wanting to leave it 100% stock. The forcing the update post mentions that wifi stops working when you update and that you have to do some stuff to get it working. I actually spent almost 2 hours on the phone with CS for Tmobile and at the very end they told me that they can't push an update, that I can only do the checkin option which has been done. Most of my time was spent on hold. That's why I'm just looking for someone who happens to have a copy of the update that I can copy to what ever folder is needed to get my phone to update. They did mention it can be at the end of the push out by Google before I get another chance to update which is several months of bugs to deal with.
remijenkins said:
I actually did read the post about forcing the update about I don't want to have to root my phone or turn S off. I'm wanting to leave it 100% stock. The forcing the update post mentions that wifi stops working when you update and that you have to do some stuff to get it working. I actually spent almost 2 hours on the phone with CS for Tmobile and at the very end they told me that they can't push an update, that I can only do the checkin option which has been done. Most of my time was spent on hold. That's why I'm just looking for someone who happens to have a copy of the update that I can copy to what ever folder is needed to get my phone to update. They did mention it can be at the end of the push out by Google before I get another chance to update which is several months of bugs to deal with.
Click to expand...
Click to collapse
THE update is in the post... if you want to try and copy it to every folder on your phone fine... try it... but it is in that post
and if you want you could turn s-off to flash it then turn s-on when you're done... and you won't be rooted after the update applies so you won't have to unroot
If that is the update then why does wifi stop working when you flash it? And how are you suppose to get it working again after it stops?
remijenkins said:
If that is the update then why does wifi stop working when you flash it? And how are you suppose to get it working again after it stops?
Click to expand...
Click to collapse
there is more than one file posted there... The one named "PD15IMG.zip" is part of the update. It replaces the kernel and some other system files, but does not include the patches from the update, which is why wifi breaks. The one labeled The OTA is the full OTA pulled from a phone and the filename is "update.zip" I could not get the full update to flash with S-ON because it has to do some commands on the system to let it know it's going to flash becuase the phone temporarily disables the write through in place... (not sure if i explained that right). My solution is to flash the partial update which gets your kernel up to date then patch the kernel (turning s-off) and then flashing the entire update. If you're really against root you can undo all the root stuff and S-Off after the update hits... but what's wrong with root? You should still get new updates if you're still running stock, but are rooted. BUT, if you uninstall programs the updates will most likely not take (I recommend a nandroid be made before removing things so you can flash back to it get the update, make a new nandroid, then reremove software.)
Well I was actually concidering rooting updating and unrooting when my phone goes, "downloading new firmware"... It's amazing how you ***** and moan to Tmobile and things just happen. :: shrugs :: I'm happy, now I wish they would let me remove bloatware without rooting.
remijenkins said:
Well I was actually concidering rooting updating and unrooting when my phone goes, "downloading new firmware"... It's amazing how you ***** and moan to Tmobile and things just happen. :: shrugs :: I'm happy, now I wish they would let me remove bloatware without rooting.
Click to expand...
Click to collapse
Why the aversion to rooting? it's really not that hard and there are at least 4 or 5 of us in irc that will walk you through it
Rooting is nasty
The problem with the description of the method for manual install of 2.2.1 is that it is misleading; the author said HIS WiFi stopped working after installing PD15IMG but should have said from the start that PD15IMG is only part of the OTA; that EVERYBODY's WiFi would stop working after installing PD15IMG; and that the entire following process is required to get to 2.2.1 if all you want is an unrooted phone with 2.2.1:
Flash PD15IMG-->temporary root-->permanent root (lot of jibberish)-->flash rest of update-->unroot
This is an intimidating process which is nowhere given in simple and complete steps but yet is often described as "simple" or "took minutes." Maybe for some, but the "simple" suckers in a lot of people who stumble along the way.
As I did; all I wanted was an unrooted phone with 2.2.1 and I had given TMo a couple of weeks to do it. A few hours into the process and a few steps beyond trashing WiFi I realized I didn't want a rooted phone and decided either to pay somebody who knows a lot more about this subject than I do to fix it or, preferably to convince TMo to give me a new one. So I went to sleep.
And guess what? At 6AM TMo said they wanted to do a firmware update, to which I agreed, and the legit OTA over-rode that damned PD15IMG and cajoled my WiFi back to life. And as far as I know Tmo doesn't have my IMEI either, because they say on their site they don't know what kind of phone I have.
And none of that snarky "if you don't know what we're talking about you shouldn't be here," either. If she didn't know she could get pregnant from it she shouldn't have done it. The whole rooting business is nasty: there are no simple comprehensive directions, there are too many ROMs and there is too little honest description of where they fail.
It would be nice also if Google would save up its incremental improvements and let them loose at longer intervals, as Apple does, to reduce the frustration of those interested in Being First. It would also be nice if the Google open system had required carriers to be able to absorb the latest updates within a fixed time, regardless of whatever crud they lay over the basic Android. The software may be "open" as far as Google and Tmo are concerned, but between TMo and me the relationship is different.
ecdy said:
The problem with the description of the method for manual install of 2.2.1 is that it is misleading; the author said HIS WiFi stopped working after installing PD15IMG but should have said from the start that PD15IMG is only part of the OTA; that EVERYBODY's WiFi would stop working after installing PD15IMG; and that the entire following process is required to get to 2.2.1 if all you want is an unrooted phone with 2.2.1:
Click to expand...
Click to collapse
I'm sorry you had problems, but when doing anything that has a set of instructions it is wise to read the entire thing before starting. This will ensure you are fully prepared instead of lost in the sauce halfway through... Piss Poor Planning leads to Piss Poor Performance.

How to un-root/de-root your Mytouch 3G Slide

Before I begin, I'd like to say that I know we have posted this everywhere.
The reason of this thread is because there are no real clear instructions on how to un-root, and there is no actual thread, hence the reason we get this question asked so much; something I want to eliminate.
How to UNROOT your Mytouch 3G Slide
[Optional] If you are sending back your phone to Tmobile for replacement, make sure you flash the newest radio out as of now. (this at the moment is 7.09) [/Optional]
1) You will need to download "ESPRIMG(2).zip" from this thread (This is all you need, you dont need anything else)
http://forum.xda-developers.com/showthread.php?t=713507
2) Rename "ESPRIMG(2).zip" to: ESPRIMG.zip
3) Place the new renamed file ESPRIMG.zip in the root of you SD card (this means in no folder)
4) Power off your phone any way you like
5) Turn your phone on while HOLDING: VOLUME DOWN and POWER.
This will get you to a screen where you will need to wait for some loading. Let it load.
6) Once above step has finished, phone will give you some options. Hit VOLUME UP to confirm flash
7) It will take some time, and when it's done, you will be unrooted with the stock Espresso.
Credits go to: eugene373, xda-fourms, CaliBoyPhillip, and some guy I cant remember
reserved for future way to unroot
I posted the ESRIMG.zip in the q&a section a few days ago, nice catch on the radio. I totally forgot about that for warranty reasons. This thread should hit the New Bible!
Sent from my T-Mobile myTouch 3G Slide using XDA App
i did this to return my phone but after that i manually updated to the latest official ota that was 1.35. something
Just to be clear, this works even with a custom ROM? just flash esprimg and done? Seems to good to be true lol. Gotta do this to the wifes phone asap!
Sent from my SGH-I897 using XDA App
Need help!!! Recovery
I am looking for some help before I unroot. I fastboot flashed clockworkmod recovery version 2.5 and now when I enter Boolaoder and select recovery I am stuck at the splash. What should I do to get the factory recovery back or how can I get cw recovery to stick permanently??? Not to much of a noob either just a simple mistake..=)
beazie0885 said:
Just to be clear, this works even with a custom ROM? just flash esprimg and done? Seems to good to be true lol. Gotta do this to the wifes phone asap!
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Yes, its that easy!
lol
poor2rican1 said:
I am looking for some help before I unroot. I fastboot flashed clockworkmod recovery version 2.5 and now when I enter Boolaoder and select recovery I am stuck at the splash. What should I do to get the factory recovery back or how can I get cw recovery to stick permanently??? Not to much of a noob either just a simple mistake..=)
Click to expand...
Click to collapse
ask that in the Question and Answer forum of mytouch 3g slide.. im not too sure of what you're saying, and you'll get more answers there.
Hey Xologist,
Thanks for this post but I have a few things you might want to add on.
Your link to eugene373's ESPRIMG(2).zip works fine, but wouldn't auto update after a week. So instead of waiting to be updated I re-rooted and then un-rooted to 1.27.531.1 using the ESPRIMG that wegarner provided. After that I was able to do the manual OTA update without root.
wesgarner (1.27.531.1)
http://db.androidspin.com/androidspin_filedownload.asp?release=280&type=1
So after someone unroots they can just manually update(root not needed) to the current OTA via ChiefzReloaded's provided files.
-7.09.35.10 radio -1.35.531.1 build
www.4shared.com/file/dNFtt3IV/Nothing.html
https://docs.google.com/leaf?id=0B7...Y2Q0ZGUxZDJjMGIz&sort=name&layout=list&num=50
Same file with a mirror.However, the google one ended up working for me.
I am assuming this will result in a factory wipe/reset as well, correct? I'm considering switching back to stock from Cyanogen 6.1.1 since it's unable to send or receive MMS messages for me but I'm afraid I may lose the pending messages if I revert back and won't be able to recover or view them.
Pandaflux said:
I am assuming this will result in a factory wipe/reset as well, correct? I'm considering switching back to stock from Cyanogen 6.1.1 since it's unable to send or receive MMS messages for me but I'm afraid I may lose the pending messages if I revert back and won't be able to recover or view them.
Click to expand...
Click to collapse
Yeah it'll be a factory reset but you should still the messages as long as the phone hasn't actually grabbed them from the companies server. As for the actual issue, have you verified APN settings? I was having issues with MMS and data when I first flashed CM 7 and ended up switching to T-Mobiles alternate server to fix.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
DonJuan692006 said:
Yeah it'll be a factory reset but you should still the messages as long as the phone hasn't actually grabbed them from the companies server. As for the actual issue, have you verified APN settings? I was having issues with MMS and data when I first flashed CM 7 and ended up switching to T-Mobiles alternate server to fix.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Click to expand...
Click to collapse
Thank you for confirming that this would wipe the device. I was also not aware that the MMS messages would still be retrievable if they have not yet been downloaded to the device (good to know!).
I see you have found my post on these forums in regards to my issue, so I will not get into the specifics in this topic, but yes, I have confirmed the APN settings several times now.
I've tried this, but I keep getting this error... "Main Version is older"
I need to unroot because I need to send my phone in for warranty service... my power button stopped working... makes it realy difficult to get into recovery mode or anything (impossible) but I can get into the boot loader
What can I do to remedy this?
Heck, if you could tell me how to corrupt the system folders I would do that so they couldn't tell it was rooted at all...
I've tried doing it this way and I extracted the file to the root of my SD card. But when I followed the steps, all it did was take me through like I was doing a reset of my phone. Didn't remove the actual ROM. Am I not supposed to extract it? What can I do to remove this ROM because I really don't like it on my phone.
you do not extract the zip file. you just put the ESPRIMG.zip file into your root folder. when you boot into recovery mode, the phone should automatically start searching for it (you might want to give it a little time to let everything load up). it will load (this will take a while) then press volume up to update when prompted. thanks to the OP for putting this up. you saved my butt, i have to return my phone for warranty replacement because the touchscreen and all the buttons stopped working.
Hey xologist, I'm sorry but I'm still very new to rooting. I've had some issues with the touchscreen and need to send my phone in for the warranty so I need to unroot it. What do you mean by flashing the newest radio? Where do I get it and how do I flash it?
slide 3g problem
dear friend
i have a problem on my touch 3g slide i have upgrade his firmware from 2.1 to 2.2 but now when i try to open my htc it give me enter sim lock code so if there is any way to free unlock it plz help me as soon as you can thkx in advance
tayseery said:
dear friend
i have a problem on my touch 3g slide i have upgrade his firmware from 2.1 to 2.2 but now when i try to open my htc it give me enter sim lock code so if there is any way to free unlock it plz help me as soon as you can thkx in advance
Click to expand...
Click to collapse
you probably placed a different sim card in your phone because this phone is normally locked to T-Mobile. if you're on T-Mobile and want to use a different sim card, give them a call and they will get you an unlock code for free. if you thought you bought the phone unlocked (not locked to a carrier, T-Mobile), then it's not, return it to the seller or something.
I tried the esprimg.zip on the root of the sd card but every time it tries to apply it it says it is the wrong image and aborts. Any ideas?
no matter what i do i cant get it to install anything, i install and apply the esprimg.zip file, re boot, and still loads CM i may have forgot how to do all this fancey root stuff, i have Cm 7.1, can i pleeeease get a dummy version to unroot
Hi all, in a pickle here. I will be attempting to remove root and am on CM 7.1 stable. My obstacle is my volume buttons don't work. I'm removing root for warranty/return reasons, is there any way to go back to stock other than from the bootloader(sp?)? Thanks, all!
(2/12/12)So I ended up flashing CR's 2.2 rooted rom so that I could upgrade through HTC Sync to the 2.2 stock update. Thanks anyway

[Q] Downgraded, Next Step: Debranding

I have one of those Legends that require a downgrade before you root, but I decided to chicken out and after I downgraded to 1.31 or whatever it was, I decided to debrand my Bell Legend and chicken out to get the worldwide Froyo OTA. Plus, it was getting late, I didn't want to accidentally screw up the rooting because I was tired.
Anyway, after I downgraded, I installed a system update that brought me to Eclair-update-1. I don't think that was a really good idea.
Because afterwards, when I tried installing the debranded RUU from the debrand thread, it resulted in an error and I have to keep what I have right now.
UNLESS YOU GUYS HELP.
What did I do wrong? I'm only still a kid. Hell, I thought I bricked my phone halfway through installing the first RUU because there was something wrong with the drivers, I ALMOST TEARED UP FFS.
Oh yeah, and wtf is up with this BS where you format the SD card to turn it into a Goldcard, and HTC Footprints just decides to move its crap into the SD card RIGHT AFTER I FORMAT IT. It's not important, but I was just wondering.
I might have been missing some details (it's late) so please post below and tell me what I'm missing.
Thanks in advance!
PS: Oh yeah, have I voided my warranty yet? Technically, I mean. I COULD still clean it up somehow, and make it seem like I didn't do anything to it, right?
PS2: OK, now I'm getting USB errors 171 and 170 when installing RUUs. I can't get out of the RUU I'm on. Oh crap.
PS3: I just got Error 140, BOOTLOADER Error. What did I do wrong here?
At least I'm at the phone's home screen now, no more unfamilar scary-ass HTC LOGO territory.
Basically the update to "2.1-update1" brought you back to where you were before the downgrade. Your phone is stock right now.
So first relax and get some sleep
Do the downgrade again. DO NOT UPDATE.
Continue the debranding/gold card procedure.
good luck
p.s. your warranty might technically be void when you install another ROM or debrand or root, mostly they don't care as long as you didnt drop it in water . There is always a way to bring it back to stock/unroot
Oh my goodness I love you. I just noticed (while I was tired, wow, that's strange) that the strange ROM number within the About Phone menu finally clicked with what I've been doing! NO UPDATE.
So I decided to call it a night after I try once more.
So I downgraded to w/e. It was fine.
And I tried the debranding RUU. Then I got a bootloader error. I guess I'll try to find out what that means when I wake up, I'm super sleepy. (Unless you guys can help me 'til then )
It was error 140 or something like that, but it booted me fine to my downgraded ROM, so I'm good for the time being.
Good night!
EPIC ACHIEVEMENT EDIT:
Alright, I rooted it. Sweat all over the place, but hey, don't blame me. The problem above is still experienced by many people all over the internet, unfortunately. Too bad I can't answer it.
Just a question before I flash my first ROM with ClockworkMod: What about fixes? How do I flash those? Super noobish, but yeah.

Most ridiculous issue ever - please advise.

Okay so - recently my I9000m went into a boot loop (during normal use - though I did have voodoo installed) and I can not access recovery mode. I could however access download mode.
I attempted to install stock firmware from samfirmware - no luck.
I attempted to install stock firmware from the forums - no luck.
I attempted to install EZBase - no luck.
I even attempted to use Virniks 'stock everything' tutorial - no luck.
After all these attempt and various other attempts involving 3 button fixes I was still having boot-loops.
So I got desperate - and I installed the Odin One Click for captivate - I know...bad idea but like I said.. I was desperate.
Now my i9000m (bell canada) starts up with the AT&T Logo and then boot loops!
The worst part is I can't even access download mode anymore! I understand that this is probably due to the fact that the buttons are remapped - keeping that in mind I tried as many key combos as I could but still get nothing but the AT&T Logo looping over and over.
So to the point.. does anyone have a surefire way to get to captivate download mode on a I9000M?
I've read about the JIG solution but I'll use that as a last resort as I would have to order the pieces (I'm not much of a solderer).
So are there any non-JIG solutions to get back to download mode/restore my phone?
All input is appreciated and I'd like to thank everyone that has tried to help me these last couple of days!
Sounds like your internal SD card is dead.
I was having similar issues where the phone would just bootloop. I re-flashed 4-5 different stock roms which all did the same thing. One of the stock roms allowed me into recovery mode, which yielded no success only a no sd card message.
I have gone ahead and sent my phone out to Bell for repair.
Viper717 said:
Sounds like your internal SD card is dead.
I was having similar issues where the phone would just bootloop. I re-flashed 4-5 different stock roms which all did the same thing. One of the stock roms allowed me into recovery mode, which yielded no success only a no sd card message.
I have gone ahead and sent my phone out to Bell for repair.
Click to expand...
Click to collapse
I'm thinking of doing the same (bringing it to bell) though I'm not sure they'll honor the warranty with it booting up with the AT&T logo, hah :<
Yeah i dont think they would service that, i was fortunate enough to get back a stock i9000m rom so it still boot up with that.
You can try contacting samsung directly to see if they will be able to repair for you, or try the jig and re-flash to stock bell rom
Viper717 said:
Yeah i dont think they would service that, i was fortunate enough to get back a stock i9000m rom so it still boot up with that.
You can try contacting samsung directly to see if they will be able to repair for you, or try the jig and re-flash to stock bell rom
Click to expand...
Click to collapse
Called samsung last night - they said I have to bring it to bell first.
Worst case scenario I'll pay sammy to fix it =/
Update: Just got off the phone with Bell, described my problem, said that I messed with the software real hard and they said that as long as I didn't remove any warranty stickers I'll still be able to get it fixed by samsung foh freeee.
Viper717 said:
Sounds like your internal SD card is dead.
I was having similar issues where the phone would just bootloop. I re-flashed 4-5 different stock roms which all did the same thing. One of the stock roms allowed me into recovery mode, which yielded no success only a no sd card message.
I have gone ahead and sent my phone out to Bell for repair.
Click to expand...
Click to collapse
I have urgued him to flash any SGS firmware with recovery image, but he didn't listen.
And yes, I think that his internal storage bus is dead.
If so, he should write down IMEI of his phone, and send email to the Samsung Korea with the info, that his internal SD card is dead. They will send him brand new phone.
But in the case he would rather use warranty service of his provider, he will need to:
a) try reboot with adb, and fastest as he can, try to issue "reboot download" command with it
OR
b) make JIG, and reboot to download mode, and reflash stock ROM
Asking Samsung Korea for new phone with IMEI sent to them do not require any of above...
EDIT: I have missed your last reply. Good to know, that Bell will fix it for you. But I do not think that they will be able to fix it. They will more likely give you new phone.
Virnik0 said:
I have urgued him to flash any SGS firmware with recovery image, but he didn't listen.
And yes, I think that his internal storage bus is dead.
If so, he should write down IMEI of his phone, and send email to the Samsung Korea with the info, that his internal SD card is dead. They will send him brand new phone.
Click to expand...
Click to collapse
I did listen - no matter how many times I tried to flash the sgs firmware w/ recovery image it would just keep booting and wouldn't enable the functionality.
As i detailed above I tried several recommended methods to re-enable the recovery mode and none of them worked.
Thanks for your help - hopefully Bell honors what they said on the phone.
Sozage said:
I did listen - no matter how many times I tried to flash the sgs firmware w/ recovery image it would just keep booting and wouldn't enable the functionality.
As i detailed above I tried several recommended methods to re-enable the recovery mode and none of them worked.
Thanks for your help - hopefully Bell honors what they said on the phone.
Click to expand...
Click to collapse
OK. Just do not panic :-D
You will get your phone back, more likely new one.
And on other hand, this result is not your fault. Some "first-line" SGS phone models has been faulty. You are not the first one with such problem.
Virnik0 said:
OK. Just do not panic :-D
You will get your phone back, more likely new one.
And on other hand, this result is not your fault. Some "first-line" SGS phone models has been faulty. You are not the first one with such problem.
Click to expand...
Click to collapse
They said they would send it to Samsung and give me a loaner until mine is back.
Not sure if they'll still honor it when I show up in person...but I'm hoping for the best.
So to give a final update:
After a couple commutes back and forth to the Bell store and a couple phone calls to Samsung it looks like I voided the warranty and I'm SOL on getting this phone repaired.
The (semi)bright side of the story is that I have an insurance policy with Bell and I'm getting a brand new SGS for $150.
Sozage said:
So to give a final update:
After a couple commutes back and forth to the Bell store and a couple phone calls to Samsung it looks like I voided the warranty and I'm SOL on getting this phone repaired.
The (semi)bright side of the story is that I have an insurance policy with Bell and I'm getting a brand new SGS for $150.
Click to expand...
Click to collapse
Little too much for a few hours of your time. If you'd reflashed stock ROM and ignored vibrant fw, as I've suggested, they would have no chance to find out what happened, and you've been given new phone for free. But you were in a hurry. Besides, your second, but in the circumstances of your haste not important misstake was, that you've told them what you have done.
Sent from my GT-I9000 using XDA Premium App
Virnik0 said:
Little too much for a few hours of your time. If you'd reflashed stock ROM and ignored vibrant fw, as I've suggested, they would have no chance to find out what happened, and you've been given new phone for free. But you were in a hurry. Besides, your second, but in the circumstances of your haste not important misstake was, that you've told them what you have done.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Exactly what I thought...you gave them extremely obvious reasons to put you at fault when you could have easily gotten a free replacement out of this. Don't answer questions that aren't asked
My father's I9000M had a failed SD and I got it replaced for free. Ironically his had a single ROM flashed on it and mine has had over 100 and been 100% fine.
chambo622 said:
Exactly what I thought...you gave them extremely obvious reasons to put you at fault when you could have easily gotten a free replacement out of this. Don't answer questions that aren't asked
My father's I9000M had a failed SD and I got it replaced for free. Ironically his had a single ROM flashed on it and mine has had over 100 and been 100% fine.
Click to expand...
Click to collapse
Btw, it does not matter how many times you'll reflash, this sd bus failure is pretty common in some first series of GT-9000 and GT-9000M
Sent from my GT-I9000 using XDA Premium App
chambo622 said:
Exactly what I thought...you gave them extremely obvious reasons to put you at fault when you could have easily gotten a free replacement out of this. Don't answer questions that aren't asked
My father's I9000M had a failed SD and I got it replaced for free. Ironically his had a single ROM flashed on it and mine has had over 100 and been 100% fine.
Click to expand...
Click to collapse
My BELL phone started up with an AT&T logo... even if I didn't volunteer the information they would have figured it out and sent me the bill.
As soon as they determine it is off warranty Samsung charges $35 dollars just to evaluate the problem and then charges you to fix it.
Yes I should have just brought it back when it first messed up but I figured my warranty was already voided due to the voodoo installation that I could not reverse (due to the boot loops).
Lesson learned.. probably won't tweak my phone too much in the future...especially if (like my last phone) I can't get into recovery mode - though I'm hoping this is fixed in the new phone I get.
Sozage said:
My BELL phone started up with an AT&T logo... even if I didn't volunteer the information they would have figured it out and sent me the bill.
As soon as they determine it is off warranty Samsung charges $35 dollars just to evaluate the problem and then charges you to fix it.
Yes I should have just brought it back when it first messed up but I figured my warranty was already voided due to the voodoo installation that I could not reverse (due to the boot loops).
Lesson learned.. probably won't tweak my phone too much in the future...especially if (like my last phone) I can't get into recovery mode - though I'm hoping this is fixed in the new phone I get.
Click to expand...
Click to collapse
$5 jig could have saved you $150
But at least you're having your phone repaired...
Kops said:
$5 jig could have saved you $150
But at least you're having your phone repaired...
Click to expand...
Click to collapse
Not repaired! New phone! Maybe even one without a faulty SD card!
Sozage said:
My BELL phone started up with an AT&T logo... even if I didn't volunteer the information they would have figured it out and sent me the bill.
As soon as they determine it is off warranty Samsung charges $35 dollars just to evaluate the problem and then charges you to fix it.
Yes I should have just brought it back when it first messed up but I figured my warranty was already voided due to the voodoo installation that I could not reverse (due to the boot loops).
Lesson learned.. probably won't tweak my phone too much in the future...especially if (like my last phone) I can't get into recovery mode - though I'm hoping this is fixed in the new phone I get.
Click to expand...
Click to collapse
The lesson you should've learn is to READ before you attempt anything.
I've flashed about anything to this phone and it's pretty hard to really brick the thing... Flashing the rom from a captivate is realy not in the line of "tweaking" rather than no-sens what so ever...
t1mman said:
The lesson you should've learn is to READ before you attempt anything.
I've flashed about anything to this phone and it's pretty hard to really brick the thing... Flashing the rom from a captivate is realy not in the line of "tweaking" rather than no-sens what so ever...
Click to expand...
Click to collapse
Right, it should be enought to use common sense, and think a little before any further action. I have tried almost anything, starting with dualboot to xubuntu linux, or editing apk's, modding and themming apps (not always successful), erasing all data partitions, created new ones, installed (or at least tried) to install gentoo linux with simple routing capability, and so on. And I'm still here.
Truth is, that some first lines of SGS were affected with faulty sd bus. But there is no need for paying warranty service, and no need to be few days without my phone. If common sense is used, then User would not:
1) install captivate firmware
2) flash anything before cwm is working
if both above fails, he'll reboot to the download mode, flashed canadian or any other fw containing Sbl.bin, alias recovery.
After that, he would flash standard stock firmware which is used by his operator. As a last thing, he would wipe sdcard from recovery.
Phone will look, behave and WILL BE same as he'd bought it.
So they will look on it, and will see standard, untouched phone, which is unknowingly rebooting itself.
Voila! They'll have no other chance then give you brand new phone right on the spot.
So for the next time, keep your mouth shut at least, when you deal with operator ;-)
Sent from my GT-I9000 using XDA Premium App
t1mman said:
The lesson you should've learn is to READ before you attempt anything.
I've flashed about anything to this phone and it's pretty hard to really brick the thing... Flashing the rom from a captivate is realy not in the line of "tweaking" rather than no-sens what so ever...
Click to expand...
Click to collapse
I wish people would read the entire thread before posting more bs like this.
Trying to put the captivate software on my phone via Odin One Click was the 10th or so thing I tried to do to restore my phone. Nothing would work - recovery mode did not work on my phone nor was I able to restore it.
Flashing the captivate software was an attempt to get recovery working (a desperate attempt) and had nothing to do with my comment about tweaking.
diaf.
I know there is nothing you can do but out is bs that you' voided' warranty. they make you pay $150 for THEIR hardware failure.

Categories

Resources