PC does not recognize HTC TD2 - Touch Diamond2, Pure General

I have my TD for 4 month (HTC TD2 EN, ROM 1.39), no problems untill now
every second or third day i connect my TD2 to PC and synchronize calendar and download data or photos
after connection there was always the table to chose the connection mode (Activesync, usb disc, modem) and then i was connected
but it doesnt work now, no table shown, only recharging is on, PC doesnt recognize the connected TD2 - no new or unknown device is shown, no removable disc indicated, nothing
i tried two PC's, WinXP SP2, SP3, Win7, three usb cables, soft reset, hard reset, changing "USB to PC" connection settings in WinMobile
nothing helped, TD2 is only recharging, no connection with PC

Hi , have you tried this? :
go to settings > more > connections on you td2. Then choose USB to PC and hit the last checkmark. (ask me first about blabla..)
Think this will solve your problem.

kaas11 said:
Hi , have you tried this? :
go to settings > more > connections on you td2. Then choose USB to PC and hit the last checkmark. (ask me first about blabla..)
Think this will solve your problem.
Click to expand...
Click to collapse
i have already tried that, all different combinations
eiffeltom said:
...
i tried two PC's, WinXP SP2, SP3, Win7, three usb cables, soft reset, hard reset, changing "USB to PC" connection settings in WinMobile
nothing helped, TD2 is only recharging, no connection with PC
Click to expand...
Click to collapse

oh sorry man , didnt read good. Damn you really DID try everything...
sounds like a hardware error to me then, but its strange it can still charge.. good luck

Try to disable Windows(or third party) firewall if you have any.

firewall off didnt help
i tried also windows safe mode - classic flashdisc (removable disc) worked there, Diamond didnt work - it didnt connect as removable disc nor show the dialogue window to chose the connection mode
Diamond didnt work with playstation3 too (as removable disc)
in all cases it was recharging, so recharging and taking the electricity from pc or whatever from calbe is ok, only the data connection is out
i also wrote to HTC support and they replied me that i had tried everything i could (settings, SR, HR, more computers) and that it seemes it is a hardware problem and that i should reclaim the device

Could you confirm that in setup => Connexions =>USB to PC => activate advanced network functionality is uncheked (sorry for the translation my rom is in french).

yes, i can confirm that this option is unchecked, i have tried all possible combination in this settings with no effect
no connection with pc
it must be hardware problem

Same problem
I experienced the same problem today. When I try to connect my D2 to my PC through the cable, the device is only charging while the device is not recognized. Very Strange & I believe that it is a hardware problem. Now, I sync through Bluetooth …

Solved
After Changing the cable, everthing worked fine.

Solved too
It works at me suddenly
Because I couldnt connect to my PC and I wanted to add sth on my memory card I took it out to my card reader.
But then when I needed to recharge my phone (through PC) it showed me the connection table and all worked.
The output and input of the card did sth to the phone and made it work. So it is ok for now and I dont need to send it to the service (and I will not look like an idiot ;-) ).

Related

Activesync working w/t Bluetooth but not with USB

Hi,
after upgrading my unbranded HTC Tytn to more recent WM5 version through official ROM upgrade from HTC (italian version QTEK_405), the activesync connection only works if I connect via Bluetooth or IR.
The USB connection doesn't seem to work anymore.
Activesync seems to try to connect, but after a while I get the "cannot establish a connection..." message.
Checking the Network Connections on the PC, it looks like there is in/out traffic packets on the device, but nothing else happens.
Also tried on another PC and same behaviour.
Activesync version is 4.5 build 5096.
Any idea also how to test that USB connector is working properly, to narrow down the problems ?
Thanks in advance
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
Also if your are running WinXP or Vista... with your phone connected with the USB cable. Check in the Device Manger, for any "unknown devices". Select them and remove.
Now disconnect your phone from your computer. Then do a "Soft" reset on your phone. Now reconnect through the USB and does it recognize it as a ppc device?? now try to ActiveSync again!!
Stuart
dgaud007 said:
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
Click to expand...
Click to collapse
Yes, no success.
I can see in the Device manager that the network card is replaced by a USB device, but nothing happens on Activesync side.
scl_electronics said:
Also if your are running WinXP or Vista... with your phone connected with the USB cable. Check in the Device Manger, for any "unknown devices". Select them and remove.
Now disconnect your phone from your computer. Then do a "Soft" reset on your phone. Now reconnect through the USB and does it recognize it as a ppc device?? now try to ActiveSync again!!
Stuart
Click to expand...
Click to collapse
Tried that.No unknown devices.
I've uninstalled the newtork card corresponding to the Tytn, disconnected and soft reset the device.
It seems to reinstall it properly, but still same behaviour.
One thing that makes me wonder is why the device shows as Windows Mobile-based device #3.
Anything I can do to celanup this ? It looks like it's got some old device hanging.
What about ActiveSync on the ppc? Do you have the "Synchronize all PC's using this connection" checkbox checked? Does it point to "USB" below the checkbox? What do you have in that MENU-CONNECTIONS... screen on the PPC?
Damn it Ive been having one problem after another with my 8525 just when I think things are going good there is another set back.
My phone wont sync to my computer anymore. I have Schaps 4.20 installed and I installed the cube earlier today just to see what it was like because I was going to upgrade to shaps 4.3. Now its time to upgrade and when I connect my phone to my pc i get a message that says "usb device not recognized"
What the heck is going on?
I uninstalled the cube from my ppc did 2 soft resets, restarted my computer and it still wont recognize my pcc
Im getting a message that says "one of the devices attached to this computer has malfunctioned, and windows does not recognize it"
It goes on to say "Try reconnecting the device. If windows still does not recognize it, replace the device."
None of this sounds good. Im stressing out!
After two hard resets I finally got it to accept Shaps 4.3 rom. It still wouldnt do it after the 1st and 2nd hard reset but for some reason, the last time I connected it via usb, it worked.
THANK GOD! I dont know what happened and why it wouldnt connect but Im happy I fixed.
Activesync 4.5 Stuck saying "Synchronizing"
The post above saying:-
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
was the solution to a major headache I was having with Activesync 4.5 on a new HTC TYTN II connecting via USB. It would sit stuck with the sync indicator turning / swirling and a message saying synchronizing, but would not be doing any synchronisation!
I disabled the "Enable Advanced Network Functionality" in START-SETTINGS-CONNECTIONS-USBtoPC it it immediately began synchronising. Thought I would enable it again and it went back to just hanging there, definately needed to be disabled to rectify the problem.
Thanks.
ianb-uk said:
The post above saying:-
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
was the solution to a major headache I was having with Activesync 4.5 on a new HTC TYTN II connecting via USB. It would sit stuck with the sync indicator turning / swirling and a message saying synchronizing, but would not be doing any synchronisation!
I disabled the "Enable Advanced Network Functionality" in START-SETTINGS-CONNECTIONS-USBtoPC it it immediately began synchronising. Thought I would enable it again and it went back to just hanging there, definately needed to be disabled to rectify the problem.
Thanks.
Click to expand...
Click to collapse
I have to disable that on both my wizard and my trinity when syncing with either my XP computer with active sync 4.5 or my Vista computer which comes with WM Device Centre. The problem is since putting an otherwise rather excellent 6.1 rom on the trinity, nothing happens at all with that option disabled. With it enabled it connects but has the problem described above. On my wizard a message pops up when it establishes a connection, nothing happens on the trinity though. It was fine before with the original ROM. I am using [WWE][20-10-08]NiAx Trinity 6.1.70 BlueAngel - OS & SYS 20748 [ONLINE] any thoughts on what could be going wrong here?

activesync will not run

i have tried several soft resets, hard resets, uninstalling activesync, reinstalling activesync and none of my computors will recognize my mogul. i have checked settings and for the life of me i can't seem to figure whats going on. can anyone please help?
Try this, go to:
Start > Settings > Connections tab > USB to PC
Uncheck "Enable advanced network functionality"
My VX6800 will not connect to Active Synch with this enabled. Hope it helps.
Ks.
same boat...
i have the same problem. uncked the advance network settings, no go.
have synced before.
now looks like pc doesnt even see ppc plugged in.
wierd cause usb will charge phone but no connection.
One other thing I had noticed on mine during all this was that once the phone was in this state I would have to manually stop Active Sync on the phone and then reconnect to the PC.
try deleting the activesync partnership on the phone (not the pc)
Where do you do that at?
wwillie said:
Where do you do that at?
Click to expand...
Click to collapse
In activesync under menu|options|delete
I don't know if this is relevant to your issue but I had the same problem however, I was connecting my phone to my PC via a USB hub. I connected great the first time and when I tried to connect the second time Active Sync on my PC would not find my phone. What I ended up doing was unplugging my printer from the USB port on my PC and plugging my phone directly into the PC and it found it fine. This also happened with a card reader I have. I guess what I'm trying to say is that if you aren't plugging your phone directly into the USB port on your PC that may be what's causing the problem.
i have looked in the activesync on my mogul and the options isnt bold face print. the options is empty. im at total loss. i call a sprint rep and they said it was the phone.
I had the same problem, it went away when I updated the ROM!
Active sync worked for a about a week, it would not connect so that I could install applications, albeit I could browse the device using the explorer function.
(all of the following failed: deleted active sync profiles, disabled firewall, reinstalled activesync, hard reset and tried to use sprite backup restore (for contacts, which failed))
qu1nn
quinn, how did u flash a new rom if u can't activesync?
Try everything here first:
http://forums.microsoft.com/windowsmobile/ShowPost.aspx?postid=2620369&siteid=65
Then try a hard reset before flashing.
still stuck
i read the microsoft forum and to be honest nothing there helped me. there was another person on there that had the same issue but no one there seemed to resolve it. has anyone found a workable solution? i have read in another forum that i would have to call sprint because it might be an issue with the phone. i would try that venue except my phone has been flashed to cricket. any suggestions?
I had the same problem after spending lotof time trying all the things already posted, I find a solution that worked for me I hope works for you
in your pc go to:
C:\Program Files\Microsoft ActiveSync
then find WCESMgr.exe right click in the mouse and doble click run as
then type your login and you should be able to get back your sync
hope it work sfor you
try this... http://forum.xda-developers.com/showthread.php?t=349997
I noticed that on Windows XP you have to uncheck the Enable advanced network functionality. If this does not resolve your problem Try plugging your phone into a different usb port on your computer. If this resolves your issue, You should consider deleting the phone from Device Manager. When you plug it in again it will reinstall the drivers and work.
On vista I have not experienced these issues. You can leave the Advanced network func checked.
Hope this helps,
DaWar
dawarrior_vex said:
I noticed that on Windows XP you have to uncheck the Enable advanced network functionality. If this does not resolve your problem Try plugging your phone into a different usb port on your computer. If this resolves your issue, You should consider deleting the phone from Device Manager. When you plug it in again it will reinstall the drivers and work.
On vista I have not experienced these issues. You can leave the Advanced network func checked.
Hope this helps,
DaWar
Click to expand...
Click to collapse
yo I did this on my mogul and my computer recognized it but as a hardware. IT said something like this:"htcusbplug" i installed it but it still doesnt open up activesync.
@ artenis: im having the exact same problem...wont recognize the device at all, even though it charges fine...(im running alex's wm6.1 beta 2 rom...could wm6.1 have something to do with it?)
i had the exact same issue with my sprint mogul, tired everything, formatted my laptop, reinstalled activesync, hard and soft reset the phone, tried other usb/computers, nothing. luckily i have sprints EPP and just took it to the store for a swap for a new mogul, got a new box and everything.. good luck
Same problem with Vista Ultimate 64bit
I had the same issue with my desktop, but after trying everything I could think of, decided to give Microsoft a try.
The drivers included in the pre-installed version of Windows Mobile Device Center would not allow the computer to recognize the Mogul, so I simply reinstalled the application from here: http://www.microsoft.com/windowsmobile/devicecenter.mspx
Everything works fine now.

Activesync 4.5 Problem: won't connect to my device anymore

so i thought i'd give vista's "windows mobile device center" a try on my vista laptop, and wasn't surprised to find that i couldn't get it to recognize my phone. i was surprised to find that the xp computer that i've been using with activesync for a long time suddenly stopped recognizing my phone as well.
up to now i've hard reset phone (dcd 3.04, 3.37 radio) and reinstalled activesync 4.5. no dice. please if anyone can help me troubleshoot this thing i'd be way grateful. why has my phone stopped communicating with my computers?
For WM 6 devices, on Vista you must upgrade to Windows Mobile Device Center 6.1.
i downloaded and used 6.1 on my vista machine, but it didn't work. any other ideas? i think there may be something that changed on the phone, because now, activesync won't work either...
...bytheway, the phone will charge when plugged into either, but that's about it.
...bytheway, the phone will charge when plugged into either, but that's about it.
Click to expand...
Click to collapse
Just for ****s and giggles, have you tried the following:
1. Using a different usb port
2. Blowing the dust out of the port on the phone
3. Using the Y adapter that came with the phone in between the sync cable and the phone
First, plug into the USB, wait for the Windows new device chime, see if anything occurs in the WM Activesync.. If no Activesync connection is made (after the 'connecting' has stopped) then unplug and plug in back in another USB port. Do that at least 4 times (cycling between ports...even the same may eventually work) to see if you have a success.
Restart your PC, Soft-rest your phone and try again.
If still nothing, then don't bother plugging your phone in and then Run As An Administrator the attached batch file and then under View 'Show Hidden Devices.' You'll now see all devices that have ever been installed and retained for your OS, with the faded devices as those not currently attached/active.
Rather than the batch file you can open up a Command Promp Window with Administrator access (Start\Programs\Accessories\Right Click on Command Prompt and Run As An Administrator)
(I usually keep that batch file accessible in the root of my OS partition, just to keep it easy to clean out legacy device drivers that can cause problems.[/i])
Enter:
set devmgr_show_nonpresent_devices=1
start devmgmt.msc
Uninstall
Network adapters\Microsoft Windows Remote Adapter
Portable Devices\PocketPC
Then under Programs & Settings uninstall the Windows Mobile Device Center upgrade, and then reboot your PC. Reinstal that Device Center 6.1 update and then again connect your phone with the USB. (for the XP machine you can do all of the and unistall/reboot/reinstall the ActiveSync 4.5.
(note to self or another.....these steps to be added to the Wiki for ActiveSyn issues)
well, i'm thinking that the "****s and giggles" have it. i blew into the port, plugged her in, and it connected to my xp machine, just like days of old. after about 3 minutes though, the connection dropped, and i've not been able to get it going again since. i think this rules out any software/settings problem, and looks like it's a hardware issue. i'll try cleaning it one more time a little later, and if no go, i'll have to figure a way to re-flash the stock rom (i only have a 6gb card...) and send the beast back. thanx for the input, guys (specially keystone, dang man that was one badass post with some instructions that will help someone, i'm sure.)
Do you have the Y adapter that came with the phone? The one with the audio jack and the 5 pin mini usb on one end and the 11 pin mini usb on the other? The reason I ask is because for some reason HTC decided to put an 11 pin mini usb connector on our phones, yet supply us with a data cable that's standard 5 pin mini usb. If you have it, just humor me and try it and see if it keeps the connection.
Oh and P.S....the "****s and giggles" wasn't just a shot in the dark. I've solved many activesync problems for people before using all 3.
I actually hadn't used the cord without the Y-adapter untill today. both ways yeild the same result.
Another Activesync problem
I've been on vacation the last week and while away i had to do a clear storage..anyway, my phone was fine but when i connect thru activesync i get an error code : 85010014 and my contacts list doesnt get updated...:S can anyone out there give me some advice or do i hafto start from scratch?
Also is there a way to find my contacts on my comp?
jinx01 said:
so i thought i'd give vista's "windows mobile device center" a try on my vista laptop, and wasn't surprised to find that i couldn't get it to recognize my phone. i was surprised to find that the xp computer that i've been using with activesync for a long time suddenly stopped recognizing my phone as well.
up to now i've hard reset phone (dcd 3.04, 3.37 radio) and reinstalled activesync 4.5. no dice. please if anyone can help me troubleshoot this thing i'd be way grateful. why has my phone stopped communicating with my computers?
Click to expand...
Click to collapse
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Damn! That was simple. I unchecked the "Enabe advanced network functionality" box and I'm up and running! I'll save the hoops for later. Thanks!
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
This is the fix almost 90% of the time......
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
Worked for me. Thanks!
ok ive tried all except the hidden devices thing (gonna try it now) and no go will post if it works oh im on DCD's 3.2.6 rom and the 6.1 of device center and i dont think it has anything to do with it but i just installed 2007 outlook
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
Hi, thanks that work for me fine too
my mogul has been giving me crap with vista and xp for weeks. Nothing can solve it. I've re-flashed, downgraded, used different ports, different cables, modified the USB to PC settings.
Add this to the list of things that randomly seem to be a problem for this phone.
I had a similar situation, none of the software based suggestions fixed it. Wiggling the cord around would sometimes connect, but soon thereafter, my phone stopped charging. The USB port was the culprit, so be careful.
I'm sure everyone who was having troubles figured out solutions, just thought I'd add in my dealings with this.
I just had the phone activated today (yes I bought used) and brought it to work to sync with my work outlook, well the usb cord would charge the phone but give me nothing but errors in the way of actual data connection. I was a little bummed this afternoon thinking I bought a partially broken phone. But WHILE HAVING THE PHONE CONNECTED ( I bold because I had done this multiple times while not connected and had no results) I opened the Comm Manager and clicked on the sync button at the bottom, suddenly my computer could recognize my device and I was sync'ing like a mad man.
Very possibly a stupid thing I should have done from the start, but I don't know any better since I'm brand new to all of this. I only post in hopes of helping another bummed out soul as was myself
I an running a HTC TyTN-II 4550 phone (WinMo 6.1) on a desktop PC (WinXP).
I couldn't get Activesync 4.5 to work either, but there were obvious reasons--my version of Office 2000 isn't supported (2003 is the earliest, I think) and IE and Outlook are not set as my default mail clients (-and that's how I like it-).
I didn't really need Activesync but I did want to be able to get files on and off the phone from my desktop PC through the USB cable. When I'd connect the phone, Activesync would automatically start up and spin the little logo for a while and then say "connection couldn't be made" and then I couldn't do anything--even move files on and off the phone.
What I found works is this:
1) open the Task Manager, and kill the wcescomm.exe process.
2) navigate to the folder that Activesync is installed in, and run the file named WCESMgr.exe.
3) that will popup a window, asking if you want to sync, or cancel. Press [cancel]
4) the normal Activesync window will come up, and the choices for "Sync" and "Schedule" will be greyed out, but the "Explore" button should work.
Sometimes I can disconnect and reconnect the phone without going through steps #1-#4, but not always.
With the "Explore" window you can drag files on and off the device.
I tried dragging small Word and Excel docs on and off; both converted properly when dragged onto the phone, but only the Word file would convert again when dragged off.
The phone will access the internet through the USB when hooked up this way, also.

How to set a BA WM6.1 on XP with AS 4.5?

I can't connect, grayed out. Can't find a solution on this part for the forum for it?
There is no specific solution, as this should just work out-of-the-box. Maybe a proper HardReset will solve the problem?
And BTW: what is grayed out? AS connection is initiated automatically just after connection. Maybe connection is not properly done or cable is damaged?
Reinstalling AS might also work as well. I have had that happen to me before, but before going into HR, reinstalls, flashing, etc., try the obvious ones (ie, try to plug the craddle in a different USB port)
On the pocket :
Start => Settings => System=>USB to PC=>Enable advanced network functionality should be checked
On the PC
open activesync
File => Connection settings=>Allow USB connections should be checked
after these settings your device should connect, if it is not check if your firewall blocks the access of activesync to the network
yes, my only experience of failure was due to a firewall that blocked the connection between BA and AS...
Try to shut it momentarily down and then retry
If you are not successful this way, perhaps you have problems on connectors or cables, but it sounds me quite strange...
Let us know how you are going on!
...or change your USB port...
xplode said:
On the pocket :
Start => Settings => System=>USB to PC=>Enable advanced network functionality should be checked
On the PC
open activesync
File => Connection settings=>Allow USB connections should be checked
after these settings your device should connect, if it is not check if your firewall blocks the access of activesync to the network
Click to expand...
Click to collapse
Xplode. I did all this still it isn't connecting. I haven't tried the XP firewall yet. Now I have read on the above the first option could be untaggged but this was about another device. Many seems to have similar problems when not using Vista and de comm. center but everthing on hardware is working here.I put off the firewal for a moment, reset and it basically didn't do anything. AS is set as an exception in the firwall options. Can't do much more now since I am in the hospital since 5-31
I have the same problem with my notebook. If you're email-account in Outlook is running on an Exchange-Server, ActiveSync will only connect when the PC ist connected to the Exchange-Server. I tryed ActiveSync on an other PC without Exchange and it's working.
Greets Rossi
Meanwhile I removed Office 2003 still I haven't been able to sync with the device.I haven't got any exchange account. I can't remember if I did before at home, sync.Probely not. I can't test because I ain't home yet. I didn't use the BA as my main device, just to experiment with.
Hmm, I did browse the BA via AS at home

Can't connect to PC

Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
deadmau said:
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
Click to expand...
Click to collapse
Firstly, what operating system are you using on your PC?
Secondly, have you tried deleting the sync partnership on both your phone and the PC and recreating it?
Thirdly, try and connect your phone directly to the USB root hub on your PC and not via a hub.
The fact that the HD2 is identifying the physical connection suggest the problem may lie at the PC end. Recreating the sync partnership is probably all that's needed.
Hello
If you are using Vista or Win7 you need to download Microsoft Mobile Device Manager to get a successful connection. Once you download this and install all will be good.
There is an option (can´t remember where) where you can disable fast link for ActiveSync.
This fast option has created me a lot of problem.
i'm using win7, i reinstalled the mobile device.
If i disable enable faster data sync then I can sync the phone with the computer but if I enable faster data sync then the 3G band auto enables...
I have just in the last weekend somehow lost the ability to connect to any computer. I have an activesync connection with work and a connection via hsdpa to the server too, and then one via wmdc on my vista home computer.
All has been going swimmingly until the weekend when I noticed that it had stopped synching new appointments.
The computers (both) now no longer even detect the phone, although it does charge via the usb cables.
The settings are still set to sync on the phone (as opposed to say disk drive).
I've tried a bunch of things, and now annoyingly, have hard reset the phone, but no joy!! Now I have the joy of setting everything back up again... But still no synchronising with the computer.
Any thoughts would be greatly appreciated.
bcorgan said:
I have just in the last weekend somehow lost the ability to connect to any computer. I have an activesync connection with work and a connection via hsdpa to the server too, and then one via wmdc on my vista home computer.
All has been going swimmingly until the weekend when I noticed that it had stopped synching new appointments.
The computers (both) now no longer even detect the phone, although it does charge via the usb cables.
The settings are still set to sync on the phone (as opposed to say disk drive).
I've tried a bunch of things, and now annoyingly, have hard reset the phone, but no joy!! Now I have the joy of setting everything back up again... But still no synchronising with the computer.
Any thoughts would be greatly appreciated.
Click to expand...
Click to collapse
Did you reboot the PC? I occassionaly have problems with activesync stopping working suddenly. It doesn't really like being unplugged sometimes and get's a bit ansy about it. I've found that sometimes a soft reset of the phone does it, but sometimes I need to reboot the PC.
I hope you did try rebooting the PC before you did a hard reset. At least you wouldn't have wasted your time with having to set up your phone again!
Yes did indeed! Restarted both. But the fact that it's affecting 2 computers suggests to me that it's something wrong with the phone, and not computers themselves.
HTC haven't been any help as yet - just haven't responded to my requests.
bcorgan said:
Yes did indeed! Restarted both. But the fact that it's affecting 2 computers suggests to me that it's something wrong with the phone, and not computers themselves.
HTC haven't been any help as yet - just haven't responded to my requests.
Click to expand...
Click to collapse
The fact that it still doesn't work after a hard reset leaves me at a loss!
You're telling me!
Before anyone asks also, I've tried different cables and different usb ports on both computers too.
Any other thoughts out there? I'm starting to think now it's something inside the phone - i.e. the usb port?
Fixed for me!
After having sent off the phone to HTC, it was repaired in 8 days and that was sending it to and from Sweden to the UK!
Turns out the usb connector in the phone itself was not working. 10/10 for HTC repair service!
If you use the XPP OS.
You must select ‘To enable faster data synchronization’ (i dont konw how to translated that, sorry my English.) under the ActiveSyuc.
If you use the Vista OS.
You dont select this option otherwise you cannt connect you phone to computer.
me too,..i can't connect with my pc... my computer show me found new hardware & need 2 install driver,...tell me what kind of driver need...? thank!!!
me too,..i can't connect with my pc... my computer show me found new hardware & need 2 install driver,...tell me what kind of driver need...? thank!!!
Click to expand...
Click to collapse
Microsoft Corporation - Other hardware - PocketPC USB Sync
Download size: 11.1 MB
You may need to restart your computer for this update to take effect.
Update type: Recommended
Microsoft Corporation Other hardware software update released in May, 2007
At present, I'm confering with Microsoft about the issue I'm having with my Vista laptop. It finds the correct driver with windows update, but the driver fails to install even with a clean boot.... they're working on it...
deadmau said:
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
Click to expand...
Click to collapse
I had the same problem and 'solved' it by trying every other USB port, and (of course) the last one did it correctly.
bcorgan said:
You're telling me!
Before anyone asks also, I've tried different cables and different usb ports on both computers too.
Click to expand...
Click to collapse
To make Active Sync work
Turn off Setup\other\USB to PC\ActiveSync Enable Faster Data Synchronization
The all will be ok
SOLVED!! Joy, joy, happiness glow... . I removed AVG 9.0, restarted, reinstalled WMDC and the driver (all of which installed automatically when I plugged my HD2 in to the USB port), and reinstalled AVG 9.0 and… Voila, MAGIC! I had AVG configuered correctly to allow WMDC to make connections and pass through the antivirus, but I still had to uninstall it to get the driver to install. Sometimes antiviruses are stubborn!
hi i had the same problem try this go to settings on your phone all settings connections usb to pc and uncheck the fast sync box if that dont work theirs an option that is somewhere on your pc where you can choose the pc to search for an update driver for that device
marquez2010 said:
hi i had the same problem try this go to settings on your phone all settings connections usb to pc and uncheck the fast sync box if that dont work theirs an option that is somewhere on your pc where you can choose the pc to search for an update driver for that device
Click to expand...
Click to collapse
I tried BOTH of those options prior to uninstalling AVG and no joy. Bytheway, I've switched to Microsoft Security Essentials and still have to uninstall MSE everytime I flash my HD2! UGH!

Categories

Resources