SMS Alert on Silent Interrupting Music? - Hero, G2 Touch General

Hi All,
I have searched to see if there are any posts about this, but I can't find one.
Whenever my phone is on silent, and I have music playing through headphones or the headphone jack, the music gets interrupted when a text message arrives. The music simply cuts for a few seconds, and then resumes.
BUT
It's not the music stopping playing, oh no. It obviously continues playing *silently* because the song resumes about a second later, but about a second later in the song!
Is this intentional or is there something wrong with my one?
Cheers,
Tom

huh, obviously when you're not on silent, the music is fading away to make your "incoming message" sound more obvious
looks like there needs to be some special-casing so it doesn't do this on silent. Might be worth opening a support ticket to HTC - as long as you make clear it's a bug report and not a request for help, they are pretty good about passing these things onto the dev team (though that doesn't guarentee it'll get fixed, of course)
personally, i'd think that, silent or not, you should still hear the "incoming message" sound over headphones, but that's a matter of opinion I suppose

I've also noticed that when I use my Bluetooth stereo headset to listen to music and get an incoming SMS or the phone has to play any kind of notification, it doesn't send it to the headset, but instead pauses the music (not putting it on pause, but interrupting it shortly...) for a second while it plays the notification audibly through the phone speakers.
Can anyone confirm this? Thank you.

Related

Ringtone Problem- Plays out loud even when headphones are in

Anyone have a problem like this:
I did a had reset but it still is doing this-
The speaker plays my ringtones out loud even when my headphones are plugged in!!
Thanks,
Daniel
Mine has always been like that, whicever ROM I used.
Really????
My old XDA never did this...
So if i'm listening to music I run the risk of having my ringtone play out loud??
Is the only solution to change my ring prefrences to vibrate only when i'm listening to music (since the phone volume itself cannot be muted)??
When I preview the sound it doesnt play out loud
I don't have such problem with original headset. But, if I use bluetooth headset it happens.
So this is not normal....
How do I fix it?
I tried a hard reset- didn't work!!
Playing the ringtone out of the speaker even though the headphones are in is normal with most if not all phones. The headphones are only to listen to music and calls.
If you had the phones in but not in your ears and the phone rang only in the headphones how would you hear it?
Why would your headphones be plugged in if you are not listening to music?? And to answer your question- you would know the phone is riging by it vibrating.
Anyways- many people told me this is not normal...so there must be a way to change it.
Also, when I am in silent or vibrate mode and I accidentaly or even purposely push my Voice Command button the beep sound will come out of the speaker-
It will change the sound icon from Vibrate or Silent to the regular icon but will stay in silent/vibrate mode-
Is this normal??
-Daniel
Not sure about the voice command question but with regards "WHy would you have your headphones in if you're not listening to music" the answer is to use the phone handsfree.
Whether this is in the car (law over here) or while in the office a lot of people over here use headphones instead of holding the phone to your ear, some believe that the safer or healthier. No real proof but handsfree is popular.
Saw this same post on the Neonode forum and the SE's do the same so I presumed normal and as I say if you were using the headphones as handsfree if actually a good thing. Yes the vibrate would tell you but say you're at someone else's desk and can't hear the phone vibrating across your desk (hell of a vibrate really isn't it).
Anyway, hope that answers the headphones question
So why did some people say this doesn't happen to them?
That's an unanswerable question. It could be any number of reasons and going on the state of play with the ROMs is possibly down to this.
Going through the forums its amazing the number of people that have different problems with apparently the same phone.
I have the exact same problem, and am still looking for a solution.
The most irritating thing is that when I turn all ringtones off (only vibrate on) and I receive an incoming call, the sound that is currently playing (windows media player or some other program) is played for a fraction of a second thru the external speaker (the program pauses the mp3 playback on an incoming call, but this happens to late). Because of this it's impossible to use the phone for MP3 playback in a place where it's important that no sound is produced.
It would be really nice to completly turn the external speaker off when a headset is plugged in (i find it really strange this isn't the case right now).
It would be nice if someone found a solution for this (in my opionion) huge problem.
Yea,
I found this is irritating too,
I am using pocketMax Phonealarm
and mute:
- system volume
- phone volume
but max the call volume ( as I think that's required to answer a call)
I plugged my headset (using 2.5mm to 3.5mm jack) and listen the music using winamp & increase the volume, apparently the system volume is increased too ==> I think that's the reason why everytime:
- incoming phone call
- any reminder
is sounded in the headset too.... totally [email protected]@[email protected]#
Any solution for this????!!!!!

Prevent audio push through speaker during notifications?

I'm sure most of you know what I'm talking about. If you recieve any notifications When listening to any audio through headphones (or through the mini usb port), the device pushes the notification sound through the speaker. This is fine when having a ringer enabled because I'd obviously want to hear the ring. What I dislike though, is when I have notfications (rings, text messages, etc.) on silent or vibrate, it pushes the audio that I'm listening to through the speaker still. I've always disliked this in WM. My PPC6700 did the same thing, but now I'd really like to know if there's a way to change this.
Now that I have an 8GB SD card, my Titan has started to become my primary mp3 player. I do FOH sound at a local club, and when playing music between bands, it's really annoying to have the music suddenlly cut out because a phone call is coming in. Likewise when I'm quietly watching MobiTV with my headphones on at work, and suddenly, Survivorman is blaring through the speaker because a call is coming in...You get the point. The ringer is off, but the phone still trys to let a ring through the speaker anyway, and since no ring is selected, it pushes any audio being played through.
I realize that this relatively simple problem probably does not have a simple solution as this is probably buried deep in the architecture of how WM handles audio gateways...that almost sounded like I knew what I was talking about; I can assure you that I do not . This is where you guys come in. I'm willing to test any ideas you guys have got. I don't care if it f&#*s up my phone...a hard reset isn't going to ruin my day. I'd just like a solution for this.
Ideas??
Thanks for your help and for this forum!..it has saved my phone more then a few times already.
Me too having the same problem. I listen to music via my bluetooth mono headset and these notifications (whcih I get plenty) disconnect the bluetooth audio gateway, forcing me to reach out to my phone and enabling the audio gateway again.
Yeah, I hate that too! I have the i760, one other thing on this phone I dislike is that the volume must be on to hear audio through my headphones. But there I am in a store listening to some rock at a loud volume, and there it is playing for the entire f'n store to hear when I get a call, thanks PPC!
Possible Solution!!!!
Might I recommend a Profiler. Like PPCProfiler. Just Google it.
What you could do is create a profile called music or what ever you want to name it. Then you could set up that profile to turn ringers on with the volume level you like and with or without vibration and select silent or vibrate only for the notifications. You could really but together any combination. I believe with PPCProfile you can even make a profile as a Headset Mode. So it will auto detect the headset and switch without having to do anything else.
Cheers.
Curious G.
Thanks for the reply, but a profiler isn't exactly what I'm looking for. I've had them before in previous roms. The problem isn't that it's an inconvienence to switch to silent or vibrate. It's that when things are silenced or on vibrate, any background audio is pushed through the speaker while the notification is going off. Meanwhile that audio that I want to be played cuts out of the path that I want it going through (ie. headphones).
Thanks tho...I'm open to any ideas.

[IDEA] Audio notifications without interupting

I was thinking on the way in, as I got annoyed by my music getting interrupted to tell me I had a new gmail message, that it might be somehow possible to play alert tones without muting default volume. The official AIM app manages to do this somehow, and I've been told back in the day it didn't interrupt anything when an alert played, so I'd like to try to bring this back somehow.
My thoughts are that it should be doable either in the notifications code or the audio code itself. I'm planning to jump into the CM5 source head first tonight, but it would be nice to know where to go about starting looking - is anyone familiar enough with how this works to tell me if it's plausible, and which section of the code it should be in?
+1
this would be great! I mean, whats the point in a blinking red trackball, if it still interrupts music with the sound
Back in the RC29&30 days this was the normal behavior for Android. It was changed to the current action of pausing the ongoing music with RC33 (pretty sure). As much as I would love my music to not be interrupted, I prefer the current method to the old "mixing" method. Where it would just play both sounds at the same time (pretty annoying actually). What would be ideal to me is the way my SEM600i did it, when I was listening to music (or watching a video) it would just beep and vibe when an alert came in & the music continued to play. This way I knew something was happening (be it a call or message) and could check my phone if I wanted, or keep on listening uninterrupted.
daveid said:
Back in the RC29&30 days this was the normal behavior for Android. It was changed to the current action of pausing the ongoing music with RC33 (pretty sure). As much as I would love my music to not be interrupted, I prefer the current method to the old "mixing" method. Where it would just play both sounds at the same time (pretty annoying actually). What would be ideal to me is the way my SEM600i did it, when I was listening to music (or watching a video) it would just beep and vibe when an alert came in & the music continued to play. This way I knew something was happening (be it a call or message) and could check my phone if I wanted, or keep on listening uninterrupted.
Click to expand...
Click to collapse
I agree with this. Would love a simple beep rather than the whole notification tone.
id prefer a dim of the music volume then the tone, when it stops altogether its quite annoying especially in my car with the speakers up. if it just dimmed the sound down to give the notification preference it wouldnt be so disturbing and it wouldnt go loud silent super loud silent loud every time i get a text
iamwhoamnot said:
id prefer a dim of the music volume then the tone, when it stops altogether its quite annoying especially in my car with the speakers up. if it just dimmed the sound down to give the notification preference it wouldnt be so disturbing and it wouldnt go loud silent super loud silent loud every time i get a text
Click to expand...
Click to collapse
This would actually be ideal, I'm going to look into it and see if it's possible to do this.
iamwhoamnot said:
id prefer a dim of the music volume then the tone, when it stops altogether its quite annoying especially in my car with the speakers up. if it just dimmed the sound down to give the notification preference it wouldnt be so disturbing and it wouldnt go loud silent super loud silent loud every time i get a text
Click to expand...
Click to collapse
+1
this it how it should work!
iamwhoamnot said:
id prefer a dim of the music volume then the tone, when it stops altogether its quite annoying especially in my car with the speakers up. if it just dimmed the sound down to give the notification preference it wouldnt be so disturbing and it wouldnt go loud silent super loud silent loud every time i get a text
Click to expand...
Click to collapse
I think is is ideal as well but I am not sure if Apple has a patent on that. No other phone that I know of uses that except the iPhone.
I think is is ideal as well but I am not sure if Apple has a patent on that. No other phone that I know of uses that except the iPhone.
Click to expand...
Click to collapse
I had an SE phone that did that sometime ago... And i am pretty sure that Nokia N95 8GB also does it...

Problems with listening to music

These are probably not Tattoo specific problems, but I couldn't find any solution anywhere else, so I'll post here.
First one is:
While I'm listening to music on the stock or fydor ROM (I only tried these) with any music application, when I get a notification (SMS, call, whatever) even if the ringtone is set to silent or vibrate, the music stops for a second. This is really annoying when I'm texting and using the phone as an MP3 player at the same time.
Another problem:
When I receive a call while I'm listening to music (I tried HTC Music and bTunes) though headphones the music pauses. And that's good.
But if I remove the headphones to answer the call, when the call finishes the music starts playing through the speakers. This can be pretty annoying or embarrassing.
Does anyone else have these issues? Do you know of a solution?
Thanks in advance,
David
for the second I can remember some situations when i was :-s cause music started.
a solution for me was that i bought some headphones without microphone and i don't unplug them...

Cell-signal alert and music interruption

As others have pointed out, the Epic has an annoying "feature" of making a sound whenever it re-establishes a cell radio connection and there's no real way to disable it in the stock ROM.
This doesn't really bother me per se since I can live with muting the alerts volume, but that doesn't prevent the notification event from cutting into whatever music I'm listening to on wired headphones--the volume will drop to make way for an audio alert regardless of the volume level or vibrate mode, then come back up. It happens on just about every audio app I've tried.
Well thankfully, I just got a pair of Bluetooth headphones and for whatever reason the issue doesn't crop up, at least not so far. I thought others might find this helpful, particularly subway commuters.

Categories

Resources