is there any solution to recover damaged Radio on sable 6915?? - Sable

i'm blocked on this step.... since i flashed my device from spanish to french..
no i have the "NO GSM" on startup... the last solution for me is using MUTTY..
any help?

Related

After upgrare Stucked at boot screen

Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone
same problem here,
help needed in advance
Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.
hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.
how do you get the phone into the bootloader?
Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.
no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?
The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)
im having the same problem on the o2 orbit ( need a orignal rom
upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent
i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.
cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!
send me a pm with your email, i'll send it to you
got mine back from the repair center friday.
no cost at all, fixed
route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one

Problems after flashing my device

Hi everbybody.
I´ve got some problems after flashing my htc p3300, a swedish and NOT branded version.
Now to the problem, my device allways freezes at the "HTC" logo screen.
i can get in to bootloader, start ruu and try to flash the factory rom i´ve downloaded from this site. but the progress hangs at 2% and i get a error code wich says "invalid model id"
PLEAS HELP.
Regards // TaiNt
nevermind. i found a site where to find the factory rom and now everything works fine
Question..
The site you found for the factory rom is the official htc site or something else?
Because i have the same problem with the italian version and i can't find the original Italian rom anywhere!!

1% GSM Error heeeelp ;-(

HI,
i recently recuperated a XDA, WAllaby, O2 , type : PW10A1. I have been able to flash the ROM to the XDA developpers ROM but the 1% GSM error i can't get solved.
My battery is flat and when i boot in the boot loader the XDA displays after a while GSM ERROR. THe device is also very slow and does not connect through activesync.
I have tried using the http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError solution but this does not work. I have also been looking for the famous repair.ZIP but can't find it anywhere.
Can somebody please help ?????
I have been spending several nights to get this fixed ;-((confused:

No GSM on hw6925

Hello everyone,
I ve been searching the forum for a solution on the No GSM error on my hw6925 and cant find a working one.
I was trying to put the OS to spanish and got an error and wouldnt pass the HP logo screen. I have successfully restored back to the English OS but still have the No GSM error. I have tried loading only the RadioFS.nbf and RadioOS.nbf using the Sable_RUU.exe with no luck, it gets stuck an "Flash WAN OS: 1%" and gives an error:
Client_Progress Fail !! Error : 201
Can someone help/guide me please.
Thanks.

"NO GSM" message on start-up

Hi all!
I know thereare allready a lot of different topics on this error, but i did not find any that would resolve my problem...
My HTC TYTN still shows "NO GSM" on start-up, i tried everything, now i have:
ipl-1.04
spl-2.10.Olipro
It still shows "No GSM"...i tried different ipls, spls, ROMs, tried to unlock and reaload with mtty and a bunch of tools, but nothing seemed to work...
Does anyone have an step-by-step universal solution or will i have to throw it away??im getting quite desperate here...
Tnx in advance for any suggestions and advice that might help...a lot!
Sorry camella, I'm afraid theres not a lot of hope once the "No GSM" comes up....
There are things you can try, a SHIPPED STOCK ROM or the ORIGINAL RADIO ROM but there are more failures than successes, that's not to say don't try, at this point, what have you got to loose...
Good luck...

Categories

Resources