With the directions from slayer69 and the package created by twopumpchump I made a cab which installs the widget engine to your mobile.
First of all, I cannot test it fully since I only have a phone with wm6.5 flashed on it, but the time I tried it, it worked. So if you try this, it's on your one risk.
So this works on WM6.5 phone where no widget engine has been cooked in, but it could work on other WM versions, so if you have tried it on another versions, post it here.
Afterwards do a softreset and try a widget. For example one I created which can be found here:
Streams-T Light
Download:
add_widget_engine_v2.cab
Note, if you do have the widget engine but you can't open .wgt or .widget files, just use this cab: enable_widgets_wm6.5.cab. If the file \Windows\wmwidgetinstaller.exe does not exist then you can try the cab with the whole widget engine.
Nice but the widget gives me an error; "Error update the software management database"
?
Btw - its on a WM 6.1 - Topaz
Same here. Although i didn't tried this cab, but i cooked IE 6 with Browsingie and browsingie_lang_0409 folder along with the Widget Packages from from Wm 6.5 build 23016 in my WM 6.1 21054 ROM. Widgets gave the same error while installing. I guess there is some registry hive or a file based metabase which tracks installed widgets/software. This is not setup as in 6.5 and hence this error.
I suspect that this metabase is same as used by the standard uninstaller control panel applet. I guess the installer executable that installs cabs has been changed a bit in 6.5.
Same here. Although i didn't tried this cab, but i cooked IE 6 with Browsingie and browsingie_lang_0409 folder along with the Widget Packages from from Wm 6.5 build 23016 in my WM 6.1 21054 ROM. Widgets gave the same error while installing. I guess there is some registry hive or a file based metabase which tracks installed widgets/software. This is not setup as in 6.5 and hence this error.
I suspect that this metabase is same as used by the standard uninstaller control panel applet. I guess the installer executable that installs cabs has been changed a bit in 6.5.
Tested and working on i910 Base/lite. Thanks
Martinhdk said:
Nice but the widget gives me an error; "Error update the software management database"
?
Btw - its on a WM 6.1 - Topaz
Click to expand...
Click to collapse
I get exactly the same problem here!
and it's on a WM 6.1 - DUSK ; Manila 2.5
Installed the engine cab AND the enable cab and widgets are working on my Titan with WM 6.5.
Hmmmm, sounds interesting.
I am tempted to try this on my Topaz HTC Stock ROM.
It probably won't work but it's worth a try
I'll let you guys know if it works (or if it doesn't )
Yep it's a fail!
It came up with the same message as Martinhdk.
Oh well.
ragingbull said:
Yep it's a fail!
It came up with the same message as Martinhdk.
Oh well.
Click to expand...
Click to collapse
yup same here. All my hopes are dashed
Appearently it only works on wm6.5 where the engine is removed. The engine uses, seeing the error message, the database handling of wm6.5 which is different from wm6.1 etc.
Hmm, to bad
Hi,
have installed the "add_widget_engine_v2.cab" and "enable_widgets_wm6.5.cab". When trying to install a widget (doesn't matter if .wgt or .widget, allways the same error), an error window pops up with a red cross but no text, just empty.
The same window appears when I start the "wmwidgetinstaller.exe" in the windows folder.
What is wrong with my installation? Has anyone seen this behaviour before? Any help is very much appreciated!!!
Widget engine will only work on WM6.5, don't even bother to try it on 6.1 or earlyer - there are specific functions which are present only in WM6.5
I have flashed the RTT Leet R2 WM 6.5 Build 23017. This is a light ROM without Manila. Nevertheless it should be able to handle widget?!?
A little late reaction But yes
igloo said:
I have flashed the RTT Leet R2 WM 6.5 Build 23017. This is a light ROM without Manila. Nevertheless it should be able to handle widget?!?
Click to expand...
Click to collapse
Hi, it works great with WM 6.5 Build 23017, I also tried it successfully with 23064.
Thanks for post.
Thanks for posting whether or not it worked!
Looking forward to hear more feedback
I get 2 errors. when i click on the widget to install it, i get an error saying it cant update the registry. when i click on the wmwidget' file located in the windows folder, i get an error saying ''error launching the widget''. how can i fix this? i install both files and did the soft resets. here's my device configurations.
Memory
System ROM Size : 96MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Manufacturer : Intel
Flash Chip Type : 28F256L30
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level : 2.7
ROM Date : 28/05/10
ROM Revision : WM6.5.SPv7T
OS Version : Windows CE 5.2
Bootstrap Version : Tomahawk.v7T
Bootloader Version : Spiaatie.WM6.5
Display
Color : Yes
Horizontal Pixels : 240
Vertical Pixels : 320
Color Depth : 65535
Display Type : TFT
Panel ID : 1
System
Manufacturer : Hewlett-Packard Company
Model ID : hp iPAQ hx2110
Processor Type : Intel(R) PXA270
Processor Revision : C0
Language : ENG
Country ID : ABA
Nevermind, I uninstalled both files and reinstalled them and it works perfectly. Strange. Thanks for sharing
Automatically install Widgets
Hello. Is there a way to automatically install widgets (.wgt) files during User Customization (XDA_UC or SDConfig.txt)? Thanks for the help.
Related
This ROM is based on official HTC WWE 1.25.405.1 / 5.2.1623 OS (build 18129.0.4.5) ROM and does not include radio.
First you must flash HardSPL from here thanks Olipro.
After unzipping the file you have downloaded, you must run from your desktop PC the ROMUpdateUtility.exe with your device in bootloader (pres and hold camera button and do a soft reset) with the battery above the 50%. Follow the instructions on the screen.
The ROM is fast, stable with some registry tweaks and modifications, includes only the essential files and some must have applications that I added.
Recommended for experienced users who can easily install their favorite programs.
The device starts with 121,71 from 135,65 mb storage.
After first boot, in the end of customization, go to System Settings, open WOW HD Settings, put in SRS TrueBass Speaker ---> Size 400Mz, put in WOW HD Settings ---> Normal and the SRS 3D Effect in 30%. Do not forget to open wktask manager and adjust the program the way you like.
Download links:
rapidshare
megaupload
More Programs
HTC Home plugin .2.0.814716.0 (official is buggy and is out)
Home Customizer v1.0b5
Zoom SMS - Appreciation software in Phone Settings (my extractable from my ETEN X500)
SRS WOW HD 1.2.10.0 (my extractable from O2 XDA Flame)
WkTask manager 1173b
SIPChange
GPSTest v1.04
Modaco No Data
Glossy Black Bars
Ringtones and Themes by panosha
OUT
AudioManager
Adobe Reader
BTFtpClient
SAPSettings
Bluetooth Explorer
HTC Recorder
HTC Zip
HTC Task Manager
Microsoft Games
StreamingPlayer
RSS Hub
jbed java
Sample pictures & sounds
Registry tweaks
Font size cache 32768
File system cache 4096k
Beam disabled
Disable the security warning when installing non-certified application
Do not forget to Think !!!
Have not been found problems from users.
You have 2 SIM Manager shortcuts in Programs, one in main and another one in Accessories folder. You can delete one of them without risk.
With resco explorer go to Windows\Start Menu\Programs. Here you can rename empty Games folder in Apps.
Use Accessories & Apps folders to move here shortcuts from Windows\Start Menu\Programs.
Heyoo! Good!
i wait my friend ....... its posible in this weekend ?
thank you
will be waiting. GR or WWE?
I am cooking only WWE. I will be ready in one hour.
panosha
everybody here is waiting for you to cook a rom
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!you are the best ever !!!!!!!!!!!!!!!!!!!!!!!!!!!!
i will not sleep until you release the rom
thank you thank you thank you
nothing more to say
everybody here is waiting for you to cook a rom
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!you are the best ever !!!!!!!!!!!!!!!!!!!!!!!!!!!!
panosha said:
I am cooking only WWE. I will be ready in one hour.
Click to expand...
Click to collapse
thx for prompt reply. ready to flash
thanks panosha! you are the best!
Ι thihk I am ready...
Thank you
I'm flashing now
thanks m friend (its 6.1 ) ?
naxos said:
thanks m friend (its 6.1 ) ?
Click to expand...
Click to collapse
no, it's WM 6
Looks good, tho I'm still wondering about using HTC Home vs SPB stuff which have more features...
I like HTC Home plugin, together wiith cube i think we have easily fast access in programs.
@Panosha
Thank you for this.
I've asked this question before, but so far no answer:
to flash off the SD card, do we need to re-name the RUU_signed.nbh file (like with the Trinity) ?
Something like this we made also in the kaiser but with name "KAISIMG.nbh".
I don't now...
http://forum.xda-developers.com/showthread.php?t=336158
panosha said:
Something like this we made also in the kaiser but with name "KAISIMG.nbh".
I don't now...
http://forum.xda-developers.com/showthread.php?t=336158
Click to expand...
Click to collapse
OK, here is the result of my effort over original WWE ROM:
1) of course, install HardSPL 1st (needs Async with XP)
2) re-name Panosha nbh file to POLAIMG.nbh (clue was in Bootloader mode, POLA100.* on screen, so I guessed)
3) 1Gb micro-SD card format either FAT16 or FAT32 (makes no difference, the device still reads it ok)
4) copy POLAIMG.nbh>card, insert card
5) Bootloader mode, the device likes the OS image and updates straight away
6) after the flash and soft reset, we have:
ROM 1.25.405.1
ROM date 12/11/07
Radio 1.58.21.23
Protocol 25.65.30.04H
Storage total 136.52 Mb, used 13.89Mb, free 122.63 Mb
Program total 100.77 Mb, used 37.59 Mb, free 63.19 Mb
So, we now *know* to re-name the nbh file to POLAIMG.nbh to flash off card
Panosha's ROM works perfectly
Still, I think I will choose another clean version, I don't want TouchFLO, HTC Home etc clagging my Storage. But we know Panosha ROM works, and how to flash off the card
BTW, is there any difference btwn an installed program and the same one packaged in the rom?
I keep it clean as i can
Rom version: 6.10.00
Rom Date: 27.02.2008
Page Pool: 16 MB
Core: 5.2.19199
Build: 19199.1.0.0
AKU: 1.0
OEM Software updated:
Sim Manager 6.38
InvokeSIMMgr.dll 1.12
PhoneSetting.dll 5.38
POWER_SERVICE.dll 2.16
STK_Service.dll 4.58
STK_UIPPC.exe 4.56
USSD_Dll.dll 3.16
Comm Manager 2.06
DataDisconnect 1.12
Changes from the original 19199 rom:
Replaced the calculator with SPBCalc and added Touch skin to it
Replaced today images with black ones
Groupped the start menu items in subfolders like in all of my roms
Replaced Welcomehead.96.png with one matching the today images
Removed most of the ringtones
Removed the default themes (left only windows default it can not be removed)
Removed Windows Update
Removed Windows Marketplace
Removed Remote Desktop Mobile
Removed VoIP
Removed Transcriber
Removed Office
Most of this software is available as cabs see the following
Example EXTROM:
Extrom_version.CAB - sets the extended rom version to xplode_7.00
AdobeReader_2.00.288531.CAB - Latest Adobe Reader from the original 19199 rom
htcflashlite.CAB - Latest HTC Flash Player from the original 19199 rom
HTC.Album.1.0.822.716.CAB - Old but working
HTCHome.2.1_1005.722.CAB - Old but working
JbedJava_MIDP_0_0_20070822_1_1_WWE.CAB - Latest Esmertek Jbed Midlet Manager from the original 19199 rom
RDM.CAB - Remote Desktop Mobile from the original 19199 rom
VoIP.CAB - VoIP Support from the original 19199 rom with configuration addons
WU.CAB - Windows Update from the original 19199 rom
WU_enable.CAB - Enable Windows Update (windows update will not work without installing this cab)
Office_6.1.19199.CAB - Office 6.1 with OneNote from the original 19199 rom
Arcsoft_MMS_5.0.31.7.CAB - Arcsoft MMS Client from the original 19199 rom (for some reason the mms settings not show, this is a common bug with this version)
NetworkPlugin_1_0_30468_1.CAB - Latest HTC Network Plugin from the original 19199 rom
AudioManager.CAB - 1.02 409.721 Old but usefull
BT_BPP_1_6_1_0.CAB - Latest HTC Bluetooth Print Plugin from the original 19199 rom
Windows_Live_10.6.0034.0800.cab - Latest Windows Live Mobile
MMS_enable.CAB - This cab enables MMS folder in the mesaging application
BlackBars.exe - This program automatically makes your up and down bars black
Upgrade HOWTO:
1.Download the archive below
2.Extract it to folder in your computer
3.The password for the archive is blueangel
4.Copy EXTROM folder to your SD card (customize it if you want to)
5.Put your device in bootloader mode - For help with this step read here
6.Run Upgrade.exe to start the upgrade procedure
7.After finishing the upgrade wizard soft reset your device to exit bootloader- For help with this step read here
9.Hard reset your device - For help with this step read here
10.Allign screen
11.Wait for the instalation of the cabs from the EXTROM after that the device will soft reset
Congratulations, you are ready to use your device
Notes:
If you have problems or errors with the upgrade utility kill activesync, remove the SD and sim card and retry. After upgrade is completed before pressing the soft reset to exit bootloader insert your sd card in order for EXTROM to kick in. Anyway you can use the rom without any extrom
The HTC Home theme is not included because i have no permission to use it
Download:
RUU_BA_xplode_WWE_6.10.00.rar
Mirrors
http://rapidshare.com/files/95699386/xplode_WM6.1_Pro_CE_OS_5.2.19199__Build_19199.1.0.0_.rar
http://www.sendspace.com/file/qpjpwm
http://www.megaupload.com/?d=72PSPOXQ - by LGSilva
Known Bugs:
The comm manager icon in system tray does nothing on tap - solved see the attached cabs
WMP is skipping when playing MP3 - solved see the attached cabs
Wlan has problem with authentification and does connect very hardly to a protected network - solved see the attached cabs
Camera app crashes after recording MP4 video - working on it (actually it records the video but can not preview it in camera app, but you can view it from any multimedia player which is mp4 capable like WMP, TCPMP, CorePlayer ...)
MMS Settings does not show at all - working on it - temporary solution use the previous version - from here or from cabs2.rar from helmis rom thread (here and here)
OBEX problem (can not recieve files trough BT) - install attached EnableOBEX.cab, go to Start=>Settings=>Connections=>Beam and check "Recieve all incoming beams"
Attached fixes:
WlanMgr.cab - this is a registry setting that maps the comm manager icon in system tray to Wlan Manager
CommManager.cab - this is a registry setting that maps the comm manager icon in system tray to Comm Manager
WMPFix.cab - this is a fix to WMP skipping during playback
!WLAN_Fix.cab - this is a fix to WLAN authentification issues (wifi just does not connect or connect very hard)
HideSimContacts.cab - as the name show this cab hides sim contacts from the contact list
EnableOBEX.cab - adds IsEnabled=0x1 in [HKCU\Software\Microsoft\Obex] - enables obex service on startup
If someone needs .NET CF 3.5 Press Here
FlightMode.cab - for all of you with FlightMode problems this is a lil app from WinMobileApps.com which switches flightmode on/off - the shortcut is created in Communication folder
Cool ! Thank you very much, Xplode.
So, how did you managed to do it without a working BA ?
Also, 2 questions:
1) I though WM6.1 was not officially released yet, is this a alpha, beta, RC or the final version ?
2) Would be nice to see what improvements could we expect from WM6.
Cheers,
JP
Great !!! Waiting for your ROM long time man.Thanks
i got new screen from ebay but it stopped working properly i am disassemble my BA again to see what happened ... (i have no luck with it)
well there was only one official WM6.1 rom by Vodafone for Kaiser this is a port from it
Improvements over WM6 are posted all over the board, don't be lazy do a search
How about WIFI and .NET CF?
xplode said:
i got new screen from ebay but it stopped working properly i am disassemble my BA again to see what happened ... (i have no luck with it)
well there was only one official WM6.1 rom by Vodafone for Kaiser this is a port from it
Improvements over WM6 are posted all over the board, don't be lazy do a search
Click to expand...
Click to collapse
Xplode,
Yes i have seen other WM6.1 threads in the forum (in fact there is a lot of them, specially from pdaviet), but you don't mention for instance if you are using "wifi driver v2" or not, nor if any other speed or stability improvements will this ROM bring versus your WM6 ROM, i meant.
Also any know issues from BA's WM6 solved, etc.
Just a thought.
JP
AAAA, can´t wait longer !!!
i have checked 3 times a day for an update ! (the last 2 weeks !)
(have donate already......)
We must wait... I have PDAviet 6.1 rom but i think that Explode's rom will be better. Respect man you have made grate work!
a couple of minutes to go... must... wait... a little... longer...
thanks for keeping it "clean", which bolsters my hope that it doesn't have the zoomsms application
it's very considerate of you to include the steps on how to upgrade, and to give a description of the ROM.
congratulations on your work, xplode, and good luck on your screen.
Good work explode
thanx a lot man ur the best . I will try it soon ...Im sure it will be great
thnx 1 milliard times
i'm install now
Thanks alot for this great rom!
I found the same wifi-issues like in pdaviet-roms 191999. Wifi isn't really happy to connect to wpa-protected networks. As workaround you can turn on wifi, configure your network settings, turn wifi off without connection. Than turn on wifi several times and wait. On my BA ist will connect after 2x turn on/off most of the time...
Will test other nice features of wm6.1 now...
Hi Xplode! Thanks again for your great releases.
Does this Rom includes Wifi v2? if not, have You tested if it works in this rom?
Thanks for your great rom
Thank you very much.
The rom has the default .NET CF 2.0 SP2, It has not WIFI Driver 2 (i am not sure why you calling it that). Wifi behaves the same way as in my and helmi wm6 roms.
Waiting for a long time till today!
Thanks in advance!
But cannt download...
Nice ROM!
One of the MOST anticipated release...
Thank you so much for the effort Xplode...
Most excellent work!
xplode said:
I keep it clean as i can
Click to expand...
Click to collapse
And clean it definitely is ... running very smoothly and stable. I've not run into any issues with using the applications/setup I use, including the entire EXTROM as you've provided.
WM 6.1 ... Mmmmm ... yummy.
I couldn't wait until July to release this... new build of WM6.5 that fixes the keyboard issue (but the SYM key still works, which was disabled by Montecristo's registry patch) and the device.exe issue (according to keyx's A2DP instructions)...
WM6.5 build 21820 for the iPAQ 910c/912c/914c Business Messenger:
21820br0609 download here
Known bugs/fixes:
- Right softkey on "Clock" homescreen panel requires this fix by EREZYAD (thanks!)
- I accidentally cooked .NET CF 2.0 into this ROM instead of 3.5. You can still run version 3.5 using these instructions.
This ROM features HP's newest firmware base, meaning increased max volume and other fixes. I have removed the following OEM junk:
- Cyberon Voice Commander
- iPAQ Tips, Help & Support
- HP Photosmart Mobile (and screensaver)
- Snapfish uploader
- HP custom IE homepage
- HP Today theme (and other customizations)
- Google Maps (old)
- Goolge Search (old)
- iPAQ DataConnect
(...since the new WM6.5 AutoConnect feature does the same thing)
This ROM contains the following little additions:
- NumBattery
- GPS Viewer
- Backlight Controller 0.9.5.2
Once I get around to making some new OEM packages for my favourite freeware apps, I'll bundle those in the "m" series next month:
WM6.1 21042br0709m "motherload" - pending
WM6.5 21820br0709m "motherload" - pending
INSTRUCTIONS FOR FLASHING:
1. Get a microSD card sized 2 GB or lower (SDHC won't work) and format it with regular FAT filesystem. Copy my FLASH.DIO to the root of the card. Insert card into your device.
2. Put your device into SDLoader mode by holding VOLUP+OK(button on right side) and pressing RESET. Make sure your battery has a decent charge (over 50%) and isn't connected to any USB charge or sync cable (or else your device will just go into RUU mode).
3. Watch the magic... SDLoader will check the file integrity, flash to your device ROM, do a clean reboot (can take a minute longer than usual) and then go into the "Welcome to Windows Mobile, tap here to continue" stuff.
4. If you run into any problems, repeat steps 1 through 3 with a FLASH.DIO that has worked before (i.e. you can make one from HP factory ROM update using Paloma's instructions posted here)
CREDITS
- Keyx for kitchen tools and early guidance
- PPCGeeks for 21820 sys and xip
- HP for the oem
- many others on xda-devs and ppcgeeks for their releases, tutorials, etc.
DONATION?
- I've never made a donation on xda-devs
- I'm not interested in a donation from xda-devs
- I cook mainly for my own use and interest
- I share what I cook, because sharing is easy
- I don't take orders
I'm downloading it
It works like a charm! No bug at all till now! Fast and Stable! Just the Clauncher doesn't work, but maybe it's my problem!
The issue with the keyboard is fixed! Great Job
This would seem to confirm that despite what HP says, the "Rogers 910c only" OEM files are compatible with the 912c and 914c.
I could not make the dump your rom ... I could not use the xip for my roms ...
Montecristo said:
I could not make the dump your rom ... I could not use the xip for my roms ...
Click to expand...
Click to collapse
You can't dump the whole thing because I used keyx flex kitchen; there are too many files to use the old (dumpable) method.
However, you can extract the xip from my FLASH.DIO using this command:
osnbtool -d FLASH.DIO 1 xip.bin
Then xip.bin is your xip; you'll want to insert that into an original 80 MB TEMPLATE.ROM (i.e. whatever you've been using to cook so far) using
osnbtool -c TEMPLATE.ROM 1 xip.bin
Then delete your previous TEMPLATE.ROM and rename TEMPLATE.ROM.NEW to drop the ".NEW" part.
hi
i have insalled it (testing it now)
on this rom the nav app igo works
also my lang hebrew works (but it did with every 900 rom )
the keyboard issue is the same but my test is logging using opera mini (on your rom & monto cab fix the keyboard works on opera...)
i use an app called "o3
tuch" on monto rom the app didnt see incomming sms there4 it did not show up on all screen and and by doing so i lost some functions (auto reply larg veiw..)
on your previus rom it did work with all function but now it is like monto..s' rom
can u see way/what is the diff comperd to the prev one?
something with sms event that stops after WM popup it's sms window (this way other apps can not use this event)
will try now the push maill....
4 now it looks ok 4 my the first thing i tested before heb was igo8 and it is ok now
tnx
EREZYAD said:
hi
the keyboard issue is the same but my test is logging using opera mini (on your rom & monto cab fix the keyboard works on opera...)
i use an app called "o3
tuch" on monto rom the app didnt see incomming sms there4 it did not show up on all screen and and by doing so i lost some functions (auto reply larg veiw..)
on your previus rom it did work with all function but now it is like monto..s' rom
can u see way/what is the diff comperd to the prev one?
something with sms event that stops after WM popup it's sms window (this way other apps can not use this event)
Click to expand...
Click to collapse
RE: Opera Mini... it works for me on this ROM.
RE: Your app with SMS... try disabling the on-screen message for new text message in Sounds and Notifications control panel.
The difference with this ROM is that it is a new build. Mainly that fixes the keyboard issue, which was in the OS.
benjaminries said:
RE: Opera Mini... it works for me on this ROM.
RE: Your app with SMS... try disabling the on-screen message for new text message in Sounds and Notifications control panel.
The difference with this ROM is that it is a new build. Mainly that fixes the keyboard issue, which was in the OS.
Click to expand...
Click to collapse
opera mini works at all roms the thing was thet u cannt log into the forum using opera mini
on the new ver of opera mini cab u can but it is not as good as the prev ver
it indicat on issuse with the keyboard ,if u use monto key fix you can log with any opra Ver
as 4 sms the removal of notefication did not work
anyway tnx 4 the rom
Hello,
i'm maybe the only one, but i'm having problems... when i click on the right-button for open the wireless manager from the today screen, i get an error message that the app link doesn't exist.
Except this i love this firmware... very fast and with all apps already
record button does not seem to work on this one...
Montecristo said:
I could not make the dump your rom ... I could not use the xip for my roms ...
Click to expand...
Click to collapse
Are you working on a multilanguage version?
Which .net Framework is included in this ROM? If you run "Device update" by CRC (Excellent app!), it complains that the .net CF is too old. Never happened to me before....
AlexMagik said:
Hello,
i'm maybe the only one, but i'm having problems... when i click on the right-button for open the wireless manager from the today screen, i get an error message that the app link doesn't exist.
Except this i love this firmware... very fast and with all apps already
Click to expand...
Click to collapse
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
EREZYAD said:
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
Click to expand...
Click to collapse
wow this is really fast!
i will try tonight and come back to you
thank you!
EDIT:
1. Great fix! now it's perfect
2. the Record button works after go in settings and apply "recorder"
Thanks
Thanks Benjaminries for this great ROM
ROM instalation is very easy for newbie like me
the wireless manager is fixed easy with Erezyad but the record button is still not working
and i want to ask, is anyone know how to improve camera quality?
thanks
dronel said:
Thanks Benjaminries for this great ROM
ROM instalation is very easy for newbie like me
the wireless manager is fixed easy with Erezyad but the record button is still not working
and i want to ask, is anyone know how to improve camera quality?
thanks
Click to expand...
Click to collapse
didnt start/settings/personal/buttons helpd u?
as for camera go:
front door/camerashop/bay/Nikon
EREZYAD said:
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
Click to expand...
Click to collapse
Thanks for posting that cab. I had just fixed it in the registry myself afterward and forgot to tell people: HKLM\SOFTWARE\Microsoft\CHome\CClock\SK2TEXT and SK2URL
parkhaus said:
Which .net Framework is included in this ROM? If you run "Device update" by CRC (Excellent app!), it complains that the .net CF is too old. Never happened to me before....
Click to expand...
Click to collapse
Oh weird - I just looked and it is NetCF 2.0 (what????) which I guess was put in by my SYS source at ppcgeeks. I'll stick NetCF 3.5 in the July release, promise. For now, download and install the .Net CF 3.5 redistributable from Microsoft.
Pranix said:
record button does not seem to work on this one...
Click to expand...
Click to collapse
Dude, the Record button works just fine for me. Are you talking about hitting it once? That shows up as the VoiceCMD button in the Buttons control panel - it comes unassigned, but you can point it to the Backlight control (my personal favourite) or Voice Command or whatever.
The "Record" button requires you to press and hold down the button while you record a voice note.
new WM6.1 based on latest build...for the pure enthusiasts
Olio v5.10 Naked German ROM
You will find the download link at the end of this posting.
Olio v5.10 Lite German ROM
You will find the download link at the end of this posting.
Below is a list of what applications are included in this ROMs.
The GREEN COLORED items are only available in LITE ROM and not in Naked.
Please be aware, that both (Naked/Lite) versions of this ROM do
not contain Cube and/or Manila2D/3D interface.
Credits go to: bepe, olipro, cmonex, Da_G, epimazzo, shayder, chavonbravo, M-Amine, pcarvalho, whitealien
and all beta testers that helped to iron out (hopefully) most of the bugs.
------------------------------------------------------------------------------------
This is/was really hard work and there are many hours of hard work in it, so
If YOU like my work, you may consider buying me a BEER
The Donators List - (MANY thanks for your appreciated support):
Sorana
_WoRm_
errorinpersona
sqeeza
oehlke
chpelle (2x)
chrismax2005
han$
Boober
scotty2000
scarecrow2001
asky2
Steffen-AB
simarilon
Bertram B.
Christian S.
incubator
kb1313
regenknipser
Sascha K.
Kulle
Lordsnake
satman76
svek
Schnurz
nnnudel
erwin23
nordlicht277
Rainer H.
Click to expand...
Click to collapse
------------------------------------------------------------------------------------
Olio v5.10 Lite Polaris ROM specification:
XIP: CE OS 5.2.21054
SYS: WM6.1 build 21054.1.6.7 german
OEM: 3.19 patched to 101MB RAM
Available Device Memory: 100,95MB (-> 16MB increase over standard 3.13/3.18./3.19 drivers)
Free Program Memory after first boot: ~61MB with SDCard inserted
Free Program Memory after first boot: ~65MB without SDCard inserted
Free Storage Memory after first boot: ~127MB
----------------------------------------------------------------------
Olio v5.10 Naked Polaris ROM specification:
XIP: CE OS 5.2.21054
SYS: WM6.1 build 21054.1.6.7 german
OEM: 3.19 patched to 101MB RAM
Available Device Memory: 100,95MB (-> 16MB increase over standard 3.13/3.18./3.19 drivers)
Free Program Memory after first boot: ~65,2MB with SDCard inserted
Free Program Memory after first boot: ~69,7MB without SDCard inserted
Free Storage Memory after first boot: ~142MB
----------------------------------------------------------------------
Only downside of this patched 3.19 drivers is, it's unfortunately not 3D drivers capable.
Sorry for that. Radio recommendation: 1.59.46.12 (though any 1.59.xx / 1.65.xx version should do)
1.58.xx / 1.64.xx radios NOT compatible, if you use those please update your Radio seperately.
Standard Apps included:
HTC Home Olio Style (Root Dir Version)*
Office German
HTC Audio Manager
HTC Album (iolite 2.5)
HTC AudioBooster
Streaming Media (iolite 3.0)
Java
Bubble Breaker, Solitär
HTC Camera
HTC Large Titlebar
HTC Large Start Menu
HTC Endkey
QuickGPS
Microsoft Dotnet 3.7
FM Radio
Internet Explorer
Additional Tools/Programs included:
Chess (additional Game)
Adobe Reader 2.5 LE
AppToDate
ClearTemp 1.2.2
PHM Registry Editor
dotfred PIMBackup 2.8
dotfred FDC TaskManager 3.1
Schaps Advanced Config 3.3 German
Windows Live/Messenger 10.6.52.1300
Many Registry Tweaks and speed enhancements
HTC EZInput German SIP (only QWERTZ)
HTC CommManager 6 button 2.7.5.0 black
Mark all as Read Extension for Outlook
Connection Setup Manager
SMS Chat Toggler
Elf Calculator Skin
Orbit2 Button1 Icon Fix
Outlook Enhancement
Picture Enancement
Power Off Warning (Mega 2.10)
GreenBattery Fix (1 percent battery)
*HTC Home can be activated by copying the attached
HTCHome folder WITH the png files inide into the
ROOT of your device (not in Programs or Windows folder)
and activate it after that in Settings/Today.
I decided to do this that way to save some more memory
in standard ROM for those which do not need Home.
This works only in Lite ROM not in Naked.
Additional program recommendations are
inside ROM file readme.txt
Download count of earlier versions:
4.71 Lite (49 times) - deleted from RS now.
4.73 Lite (30 times) - deleted from RS now
4.75 Lite (37 times) - deleted from RS now
4.77 Lite (127 times) - deleted from RS now
5.00 Lite (193 times) - deleted from RS now
5.00 Naked (31 times) - deleted from RS now
5.10 Lite (226 times) recent version - still available
5.10 Naked (93 times) recent version - still available
Disclaimer (read carefully before trying to flash):
Although this ROM is well tested I absolutely decline all responsibility for misflashed and bricked phones.
So be sure that you are aware of these terms and know what you are doing and how to unbrick your device if it happens to fail after this update.
HardSPL is absolute obligatory for flashing cooked ROMs to be able to return to any other ROM version.
Download Olio v5.10 Lite final German WM6.1 ROM
7Z Archive Password: Olioaglio_XDAdevs
Download Olio v5.10 Naked final German WM6.1 ROM
7Z Archive Password (if needed): Olioaglio_XDAdevs
You will find known bugs and fixes in the 3rd post
General flash instructions (recommended to minimize problems)
0. Turn off all or at least as much as possible unneeded services on your PC like Antivirus, Firewall, Tools, Messenger etc. etc.
1. Flash from Bootloader Tricolor Mode (press and Hold Camera Button and stick stylus in Softreset to get into Bootloader)
2. Be sure to have at least 50% of battery left
3. ALWAYS remove your SD Card while flashing.
4. After successful flash and customizing, do a SECOND hardreset, sometimes first time some weird problems occur,
such as greyed out WLAN in CommManager and such.
5. Be happy with a successful flash
Additional/Optional useful downloads:
------------------------------------
Recommended Radio for this ROM:
Polaris Radio 1.59.46.12
Genuine HTC smart mobility Splash Screen:
HTC Smart Mobility Splash Screen
HTC Iolite Phone Canvas (Dialer)
Iolite Dialer (no Video)
HTC EZInput Full version with all Input Methods (only install if you really need this):
HTC EZInput Fix
Olio v5.10 M2D only German ROM
No longer available
These are both based on the Lite ROM, but
with Manila2D interface and some more tiny apps.
Olio v5.10 M2D Full German ROM
You will find the download link at the end of this posting.
Below is a list of what applications are included in this ROMs.
The GREEN COLORED items are only available in M2D Full ROM and not in M2D only.
Credits go to: bepe, olipro, cmonex, Da_G, epimazzo, shayder, chavonbravo, M-Amine, pcarvalho, whitealien
and all beta testers that helped to iron out (hopefully) most of the bugs.
------------------------------------------------------------------------------------
This is/was really hard work and there's hundreds of hours of work in it, so
If YOU like my work, you may consider buying me a BEER
The Donators List - (MANY thanks for your appreciated support):
Sorana
_WoRm_
errorinpersona
sqeeza
oehlke
chpelle (2x)
chrismax2005
han$
Boober
scotty2000
scarecrow2001
asky2
Steffen-AB
simarilon
Bertram B.
Christian S.
incubator
kb1313
regenknipser
Sascha K.
Kulle
Lordsnake
satman76
svek
Schnurz
nnnudel
erwin23
nordlicht277
Rainer H.
Click to expand...
Click to collapse
[/B][/QUOTE]
------------------------------------------------------------------------------------
Olio v5.10 M2D only Polaris ROM specification:
XIP: CE OS 5.2.21054
SYS: WM6.1 build 21054.1.6.7 german
OEM: 3.19 patched to 101MB RAM
Available Device Memory: 100,95MB (-> 16MB increase over standard 3.13/3.18./3.19 drivers)
Free Program Memory after first boot: ~58MB with SDCard inserted
Free Program Memory after first boot: ~62MB without SDCard inserted
Free Storage Memory after first boot: ~112MB
----------------------------------------------------
Olio v5.10 M2D Full Polaris ROM specification:
XIP: CE OS 5.2.21054
SYS: WM6.1 build 21054.1.6.7 german
OEM: 3.19 patched to 101MB RAM
Available Device Memory: 100,95MB (-> 16MB increase over standard 3.13/3.18./3.19 drivers)
Free Program Memory after first boot: ~58MB with SDCard inserted
Free Program Memory after first boot: ~62MB without SDCard inserted
Free Storage Memory after first boot: ~99MB
------------------------------------------------------
Apps included:
HTC Manila2D 1.2 (/w Graphics 2.0 Mega) Weather patched
HTC PhoneCanvas 4.0 (mega 4.0)
HTC Album (Mega 3.0)
HTC Audio Manager (Jade 2.2)
HTC Audiobooster (Jade 2.1)
HTC Streaming Media (iolite 3.0)
HTC YouTube Player fixed (iolite 1.6)
HTC Power Off Warning (Mega 2.10)
HTC Volume Control (Opal 1.6)
HTC EZInput 1.5 German SIP (only QWERTZ)
HTC CommManager 6 button 2.7.5.0 black
HTC TaskManager 2.1
HTC Camera
HTC Large Titlebar
HTC Large Start Menu
HTC Endkey
HTC QuickGPS
HTC RSSHub
Microsoft Office Mobile German
Microsoft Dotnet 3.7
Microsoft Windows Live/Messenger 10.6.52.1300
FM Radio
Internet Explorer
Java
Games: Bubble Breaker, Solitär, Chess
FingerSuite 1.11
GoogleMaps 3.2.1 deutsch
Adobe Reader 2.5 LE
Connection Setup Manager
AppToDate
Mark all as Read Extension for Outlook
ClearTemp 1.2.2
Opera Mobile 9.7 Build 35461 (/w M2D Default Browser)
Opera Wheel Zoom Patch
Opera Zoom Slider Enabled
Opera Resize Text Area Patch
URL2Opera
TouchResponse 0.3.2
PocketRAR
TotalCommander 2.52b1
TRE Regedit 0.90
dotfred PIMBackup 2.8
dotfred FDC TaskManager 3.1
Schaps Advanced Config 3.3 German
SMS Chat Toggler
.NetCF Config
Outlook Enhancement
Picture Enhancement
Orbit2 Button1 Icon Fix
Elf Calculator Skin
GreenBattery Fix (1 percent battery)
Many Registry Tweaks and speed enhancements
Additional program recommendations are
inside ROM file readme.txt
Download count of earlier versions:
4.77 M2D only (122 times) - deleted from RS now
4.79v4 M2D Full (559 times) - - deleted from RS now
5.00 M2D only (101 times) - deleted from RS now
5.00 M2D Full (139 times) - deleted from RS now
5.10 M2D only (35 times) - deleted from RS now
5.10 M2D Full (352 times) recent version - still available
Disclaimer (read carefully before trying to flash):
Although this ROM is well tested I absolutely decline all responsibility for misflashed and bricked phones.
So be sure that you are aware of these terms and know what you are doing and how to unbrick your device if it happens to fail after this update.
HardSPL is absolute obligatory for flashing cooked ROMs to be able to return to any other ROM version.
Download Olio v5.10 M2D Full German WM6.1 ROM
7Z Archive Password: Olioaglio_XDAdevs
You will find known bugs and fixes in the 3rd post
General flash instructions (recommended to minimize problems)
0. Turn off all or at least as much as possible unneeded services on your PC like Antivirus, Firewall, Tools, Messenger etc. etc.
1. Flash from Bootloader Tricolor Mode (press and Hold Camera Button and stick stylus in Softreset to get into Bootloader)
2. Be sure to have at least 50% of battery left
3. ALWAYS remove your SD Card while flashing.
4. After successful flash and customizing, do a SECOND hardreset, sometimes first time some weird problems occur,
such as greyed out WLAN in CommManager and such.
5. Be happy with a successful flash
Additional/Optional useful downloads:
------------------------------------
Recommended Radio for this ROM:
Polaris Radio 1.59.46.12
Genuine HTC smart mobility Splash Screen:
HTC Smart Mobility Splash Screen
HTC EZInput Full version with all Input Methods (only install if you really need this):
HTC EZInput Fix
HTC Hero Digital Flip Clock (like in Olio V4.7 Manila ROMs)
HTC Hero Digital Clock
Known bugs and issues in ROM version 5.00 (if fixed click onto red **Fixed** to be redirected to solution)
Multiple Message and File Select by Tap and Drag not possible **FIXED**
ActiveSync freezes device at some (very few) peoples devices (Workaround for most people: Do NOT uncheck "Erweiterte Netzwerkfunktionen aktivieren" in Verbindungen -> USBtoPC
"Töne" for changing Soundprofile is not working/brings failed message (unresolved yet)
Bug in M2D only and M2D Full: With SMS Chat Enabled tmail.exe is freezing with message (Nachricht wird geladen) when you want to access it in "Messaging" to answer. Workaround: Disable SMS Chat
ActiveSync is constantly open or reoopining itself **FIXED**
MMS and Voice Mail do not work (MMS Composer does not start on clicking) **FIXED**
Bluetooth state Taskbar icons do not show up **FIXED**
-------------------------------------------------------------
Known bugs and issues in ROM version 5.10 (if fixed click onto red **Fixed** to be redirected to solution)
Multiple Message Select by Tap and Drag not possible **FIXED**
"Töne" for changing Soundprofile is not working/brings failed message (unresolved yet)
ActiveSync is constantly open or reoopining itself **FIXED**
Bluetooth state Taskbar icons do not show up **FIXED**
Ok, folks, as this is my last ROM for Polaris due to soon platform change I will hereby release my kitchen for public use.
If you use it to create an own ROM please give me some credits
Download WM6.1 Olio v5.10 M2D Full KITCHEN German
Olioaglio
great thx
Why not ,make another on in WWE please.
Why not ,make another one in WWE please.
Super!
I cannot expect it!
vg Dr-death
Great! thx!!!
i donate a beer for the Wurstkugel!
Release status updated, will upload finished Lite ROM within the next 24 hours.
Cheers, Olioaglio
WWE edition? Is possible?
It's like waiting for christmas. ;-)
Great, thank you!
Released ROM!! Have fun!
Olioaglio
I really like this ROM so far!!!
Fast, stable, no bugs up to now.
Thanks!
But I have one question:
Is it possible to get the same Notification Manager as in pcarvalhos ROMs.
I found Topaz Notification Manager or Rhodium, but none of them worked.
Hi Olioaglio (really not an easy name ;-) What does it mean?)
Can we hope for a ROM in M2D only and M2D Full version?? I think I'm not able to find and install the right packages myself. So I would prefer to wait a little bit - or use the 4.79-ROM, which works great.
Greetings
Rookie69
THX!
I will test this rom tomorrow, when i'm back from work!
cya
dr-death
It´s not what most of you want to hear, but this ROM freezes.
I had those freezes with the 4.79 full rom, too.
The system with what I flashed was Windows XP.
I had installed the recommended radio version 1.59.42.16.
I´m now trying if it´s active sync which causes the freezing.
Edit:
I did a hardreset and only connected my Orbit 2 to active sync (and I entered my PIN) and it freezes.
I think I´ll try to flash from another computer.
I will update here if there are news.
Edit 2:
Today, I´m going to reflash the original o2 rom, after that I´ll flash Olios and the radio rom again but all from another computer where I am able to deactivate all unneeded processes.
Maybe a hint, if you flash the rom, first get your phone connected to active sync and disconnect, check if it freezes when you turn off your screen.
If not, you probably have no problems.
Flashing Olio´s rom now.
First, I flashed o2 rom, then HTC splash screen, then radio to 1.59.46.12.
Testing if active sync makes the device freeze in a few minutes.
Edit 3:
Flashed rom, did a hardreset and connected device to active sync as a guest, it seems to be working.
Testing today.
Did NOT work. Performing a hardreset now and testing again.
Edit 4:
Did a hardreset, connected to AS but did NOT uncheck option "erweiterte Netzwerkfunktionen aktivieren" (don´t know what´s it in english, sorry, it´s options - connections - USB to PC)
Now, it seems to be working since 5 minutes.
I´ll update later.
It runs up to now. Probably, it´s the option "erweiterte Netzwerkfunktionen aktivieren" that causes the freezing.
If somebody needs help, I´m happy trying to help him!
Sorry for my english, it´s not the best
Hmm. I use 4.79 Full Rom too. Flashed with Windows7RC 64bit. Absolute no problems/freezes. In my job I use ActiveSync with WinXP64bit for contacts and calender, no e-mail. No problems. Everything works perfect.
caesium2 said:
It´s not what most of you want to hear, but this ROM freezes.
I had those freezes with the 4.79 Full Rom too.
The system with what i flashed was Windows XP.
I had installed the recommended radio version 1.59.42.16.
I´m now trying if it is Active Sync which causes the freezing.
Edit:
I did a hardreset and only connected my Orbit 2 to Active sync (and I entered my PIN) and it freezes. I think I try to flash from another computer.
I will update here if there are news.
Click to expand...
Click to collapse
You know, this problem seem to appear in all the latest of my ROMs so
far, always it seems to be related to ActiveSync and/or the function
Erweiterte Netzwerkfunktionen. But it gets more and more mystical,
at least now, where this ROM may look not too different from the former
ones, but indeed it is completely new. I use new SYS, new XIP and
even new OEM (drivers). The only things left from former versions
is the two 1.60 drivers (pcem and ddi.dll) which are needed to achieve
the 100MB RAM. But I cannot imagine that these are the culprits,
because lots of cooks like pcarvalho or epimazzo use them also.
Moreover it is VERY interesting that this problem seems to affect only
some people, by far not all. I did not have it once on my test devices.
So I cannot help you with this, other than giving you some hints.
Olioaglio
Rookie69 said:
Can we hope for a ROM in M2D only and M2D Full version??
Rookie69
Click to expand...
Click to collapse
I plan to cook them, but as I don't use M2D myself this is something
I will do whenever it is some really lazy spare time so don't
expect it/them within the next few days. Maybe in some weeks or so.
I know that most of you prefer M2D full ROM as I can easily see at
the download count of the ROM versions. But it is a lot more difficult
to perfectly cook a ROM with lots of apps and enhancements than
a light ROM like the one which is out right now. I will take a look at it.
Olioaglio
Hi. 15-09-2011
Because of some asks I would like to remind that SPB Shell in my roms is trial version and is active only two weeks.
It is full functional version and to be operational version it requires serial code.
Do not be surprsied when You will loose GUI and none access to the system.
Use "face" to execute Total Commander or any other software You configured before
which allow You to execute needed system software, additional cabs, romove some cabs , etc. so that to make You system be full functional again.
Regards
fxdjacentyfxd
Hi. 18-07-2011
Below You will find links to UPDATE6 of my rom.
All concerns radio 1600.
Accordingly to some users asks, I improved some of my software:
1) fxdjBatteryStubGauge - in current version it is configurable so that user
could select whether he wants to be warned ( sound warning - even in sleep mode ) that current battery level is below configured level.
If You want this feature please read posts starting from here :
http://forum.xda-developers.com/showthread.php?t=993343&page=32
Additionaly, I add "inactive period" so that user were not disturbed by sound warning when he sleeps. For example one can set that from 22:00:00 to 06:00:00 warning sound will be inactive.
2) fxdjWMSBU - I would like to remind it is software responsible for "face".
One ot its feature was possibility to execute total commander so that to prevent user for doing hardware reset. Now, what software will be executed is configurable. If something go wrong, total commander is executed as default.
I added some packages:
a) ArkSwitch as a .cab
b) PIM backup
c) RDP
d) msn weather
e) opera mini as a .cab
Here two versions with NCF3.7 :
http://www.sendspace.com/file/onddyi - 134MB free RAM ( recommended )
http://www.sendspace.com/file/bkmxwy - 138MB free RAM
Here two versions with NCF3.5 :
http://www.sendspace.com/file/2frmhm - 134MB free RAM ( recommended )
http://www.sendspace.com/file/2dqx3t - 138MB free RAM
I was in hurry so I forgot to prepare configuration settings in my rom.
Here :
http://www.sendspace.com/file/tlmu1h
zip file with two reg files concerning fxdjBatteryStubgauge and fxdjWMSBU
After flashing hard reset as usual is required and please tap "ActiveSync Enable"
from my Utils directory so that AS worked as typical.
For people who like hardcore special version with 142MB of free RAM.
With radio 1600 and NCF 3.7. Not tested at all but should work. I hope
someone tell me what does not work.
http://www.sendspace.com/file/uad01r
Enjoy
Regards
fxdjacentyfxd
************************************************************
Hi. 31-05-2011
Because I did some works concerned with manual management of ActiveSync
and some people ask me about roms with NCF3.5 instead NCF3.7 ( NCF 3.5 has directx assembly needed by some software like Google Navifgator ) I decided to release UPDATE5 of my WM 6.5 roms. All with radio 1600 .
Here two versions with NCF3.7 :
http://www.sendspace.com/file/dt2ydj - 134MB free RAM ( recommended )
http://www.sendspace.com/file/vuj7nr - 138MB free RAM
Here two versions with NCF3.5 :
http://www.sendspace.com/file/kmfsv5 - 134MB free RAM ( recommended )
http://www.sendspace.com/file/qb760n - 138MB free RAM
Additional AS managment in directory Utils like other additional software
( some tools for GPS management ):
Here link to post with picture :
http://forum.xda-developers.com/showpost.php?p=14247007&postcount=292
After flashing hard reset as usual is required and please tap "ActiveSync Enable"
so that AS worked as typical.
Remember that my AS utilities do not eliminate need to change TG01/PC connection settings ( "mass storage"/ "AS" ) in "Settings". They only block/unblock AS so that none software was able to execute it.
"ActiveSync Kill" removes AS executables when AS connection is finished.
For example, after disconnecting USB cable between TG01 and PC, AS connection is broken but AS software is still in memory.
Additionally, transcriber software has been added.
Enjoy
Regards
fxdjacentyfxd
************************************************************************************************************************
Hi. 16-04-2011
Here http://www.sendspace.com/file/iowu3j
PATCH1 for UPDATE4 ROM . Can be applied for earlier updates ( UPDATE1, 2 a and 3 ) too
It contains the same as file already included here :
http://forum.xda-developers.com/showpost.php?p=12922239&postcount=240
How to apply it is here : http://forum.xda-developers.com/showpost.php?p=12922239&postcount=240 too.
What is is for ? Words of collegaue koku32 explain everything:
http://forum.xda-developers.com/showpost.php?p=12931207&postcount=248
I guess that in other cooked roms which utilze any .cab for WM start disabling ,
situation is similar but not fixed like in my rom. It is possible to delete there one of this
0-bytes .cpr file and WM start is active again and additional free RAM will be lost.
Enjoy
Regards
fxdjacentyfxd
******************************************************************************************
******************************************************************************************
Today I have released UPDATE4 of my fxdjROM2.0 rom.
fxdjROM2_0_update4_radio321_buildxip21840_VER1.zip
http://www.sendspace.com/file/hyln2i
fxdjROM2_0_update4_radio1600_buildxip21840_VER1.zip
http://www.sendspace.com/file/dbdhq6
fxdjROM2_0_update4_radio1600_buildxip21840_VER2.zip
http://www.sendspace.com/file/6ol3ux
fxdjROM2_0_update4_radio321_buildxip21840_VER2.zip
http://www.sendspace.com/file/65y66a
In two versions and two radios as previously.
Version1 has about 134-135MB of free ram and I recommend it as absolutely stable.
Version 2 has about 138-139MB of free ram. Some poeple tested it and their oppinions You can read somewhere in the thread.
What new/improved/fixed in comparison to UPDATE3 ? :
1) windows start button "defreezer" . Now there is no any fereeze when user tap on wm start button. "face" appearing in place of start button has two meanings:
- is for fun
- it is "life saver" place. Why ?
Sometimes people uninstall SPB Shell and do not remember that start button is disabled. If they do it - only hard reset can save their life . So far they could uninstall special .cab responsible for disabling wm start button and then they could uninstall spb shell safely. Anyway , even if someone remove current UI , he will not be in "black whole" anymore. If this happens:
- simply tap on wm start button to cause the "face" will appeare
- wait for a while and tap on the "face" before it disappeares
Now You can notice that Total Commander has been executed.
Having Windows Commander You can do any operations like installing new UI or something other. No hard reset required.
This Total Commander it is special copy of Total Commander and is placed in special directory. You can update/remove current installed version of Total Commander and it will have no any influence on the copy designed for safety reasons.
2) fixed soft "home" and "back" button. Now soft "home" button and "back" button
works as they should. As You maybe remember, before PATCH1 to UPDATE3, back button worked as ... home button too.
3) internally fixed battery driver.
4) my last software for GPS driver/service restart/status
5) because I do not like when there are sometimes "strange" ramains on application list ( making calls and recieving calls create such remains from phone.exe ), I created "killer" of this. Nobody will need this but I like to have "clean in home"
Elements from point 4) and 5) I placed in newly created directory called "Utils".
You will find it in "Programs" as directory and four applications inside.
Of course, people utilizing my UPDATE3 and PATCH1, rather will not gain too much in this update but everybody can do as wants.
Enjoy
Regards
fxdjacentyfxd
******************************************************************************************
******************************************************************************************
I attached patch1.zip file here :
http://www.sendspace.com/file/2rgybg
It is fix patch containing following files:
1) fxdjTG01HKMapper.exe
2) fxdjWMSBU.exe
3) fxdjWMSBU.lnk
It may be bit complicated to apply this files manualy ( I have no time to create special setup ) for less experienced users so if tests made by experienced users will go ok, I will realease it in UPDATE4 of my rom.
What this files change in my rom and how to apply them ?
a) fxdjTG01HKMapper.exe . This software is already runing on my rom. It fixes "back" button. Current version has bug. "Back" button does the same action as "home" button. Attached version of file fix it. Unfortunately , still unresolved problem of "zoom" button but
nobody even asked about it so far ( I know Oly, You asked )
To apply this file utilize fdcTaskManager which is on my rom in "Programs". Execute fdcTaskManager and close running version of
fxdjTG01HKMapper.exe. You will see it on "Process list " and You can close it there. First select "Close" but if it will be not possible, select "Kill". After closing, copy attached version of fxdjTG01HKMapper.exe to "\windows" directory so that to overwrite old version.
If You want save old version before it. I did not find new version unstable but who knows
b) fxdjWMSBU.exe and fxdjWMSBU.lnk . This software partially resolve problem of WM freezing
when user taps on WM start button. But we know that user should not tap on it because it is disabled
Copy fxdjWMSBU.exe to "\windows" directory and copy fxdjWMSBU.lnk to "\windows\startup" directory
c) Restart the system !
Enjoy
Regards
fxdjacentyfxd
******************************************************************************************
******************************************************************************************
Hi.
UPDATE 3 of my rom has been created.
It is functionally the same rom as UPDATE 2
but fixed so that camera software worked fine.
I released this update in two versions:
1) Version 1 - has about 134-135MB of free RAM. Works perfect.
Has been testing ( utilizng ) by me for 3 days ( almost all embeded software ) so I recommend this version.
Issued with two radios : 1600 and 321 . Here links for download:
http://www.sendspace.com/file/shac66 - radio 321
http://www.sendspace.com/file/3s1cuq - radio 1600
2) Version 2 - has about 138-139MB of free RAM. I tested it only a little bit to see whether camera software works correct.
One can expect maybe more lags or other effects but feel free to test it and let me know.
Issued with two radios : 1600 and 321. Here links for download:
http://www.sendspace.com/file/r0t10t - radio 321
http://www.sendspace.com/file/8cqmiq - radio 1600
Regards
fxdjacentyfxd
******************************************************************************************
******************************************************************************************
Hi.
As I promissed , UPADATE 2 of my rom has been created.
UPADTE 1 was not living even one day
Here http://www.sendspace.com/file/ei99x1
You can download it with radio 1600. Tested by me so surely works fine.
Maybe eving and tomorrow
morning I will upload version with radio 321.
Here http://www.sendspace.com/file/x59wd3
version with radio recently popular 321 radio.
I did not test it at all so any complains not for me if do not work
In this update ( both radios above - 1600 and 321 )You have all that was in UPDATE 1 and ....
I removed annoying lock screen during calls/talks . Now You can
navigate through the system during call and even utilize my software
to switch backlight off what is sensible because backlight eats energy.
This software You will find in my "Power" directory. One tap to screen and
You have backlight on again. It works like toggle.
Enjoy
Regards
fxdjacentyfxd
***************************************************************************************************
***************************************************************************************************
Here http://www.sendspace.com/file/gaxs06
link to update 1 of my rom.
What changed :
1) soft "home key" button works perfect and from any appplication user
can go to SPB Shell home screen
2) fix in registry concerning SRDHD - thanks colleague koku37 for this. Now
"internal" mode is remembered between system restarts.
After flashing this rom and doing hard reset, one has to select SRSHD control panel and select mode ( hedphones or internal ) because none of them is selected. After this and changin other settings it is permamanet and rememebered between system restarts.
3) Registry fixex concerning installed java and facebook
Other features of my rom - read all this post untill the end
P.S. Wait for may UPDATE 2 release. I hope I will remove annoying lock screen
showing up during calls/talks
Enjoy
Regards
fxdjacentyfxd
***************************************************************************************************
***************************************************************************************************
original version still availablle here:
http://www.sendspace.com/file/yxeup9
Features ( concerns basic version, UPDATE1 and UPDAT2 too ):
1) On startup about 298MB free ROM and 140MB free RAM
2) Base user shell is SPB shell 3.5.5 added as .cab
3) Other installed .cabs
a) Latest Palringo communicator ( includes facebook chat )
b) CorePlayer
c) Total Commander
d) Disabled WM menu .cab
e) Shutter sound disabling cab
4) Embeded software
a) Microsoft and Toshiba keyboards
b) ArcSoft software:
- MMS composer ( integrates with menu for SMS/MMS composing ) - very nice in my oppinion
- Streaming player
- Photo base
c) FDC task manager - powerfull system software
d) my own software for some power managment available as "Power" folder in Programs ( soft reset, standby, backligh off )
e) BT operations notification icon in upper bar - well known solution from other roms. I do not know whose software it is
nethertheless thanks the author for it.
f) Microsoft Office 2010
g) Java
h) Facebook application
i) Screen Capture
k) SRS WOW HD . End with with this awfull, well known strange 3 cab installation.
I did not notice any problem with stable work.
This software ( its usage ) has been improved by me. If anybody does not like this software or find it not stable ( after installing any additional software ) then one can disable it. It is not deinstallation ! One can switch between original audio drivers and SRS drivers. I created special directory ( SRSHD Manager ) for managing it and that is why I moved SRS control panel from "settings->system" to this directory.
You will find there 3 icons ( as on attached picture ):
- Control Panel ( well known )
- Disable ( disables SRS, enables original audio ) - one restart required after it
- Enable ( disables original audio, enables SRS ) - one restart required after it
Other registry tweaks. For example enabling old fashion lock screen which
saves 5MB of RAM in comparison to new fashion lock screen.
And of course my incerdible battery driver which allows all battery level sensitive software run without any problems until real 0% battery level without any interruption from the system. Never more 20% warning messages, software execution protection and battery discharge to real "0" - about 2.9V
For GPS users. I noticed that some people install new GPS driver as a cab. Why ? Does it work better than original ?
I always change GD9 in my roms to COM4 ( I do not even know if it is needed at all ) and have never had any problems
with Ozi Explorer, Garmin Mobile XT and AM . Maybe other navigation software have problems. I do not know. It would be nice
if experienced users write something here about it.
As usual ROM created via osBuilder and feropont kitchen so thank
Him for it.
After flashing hard reset is required ( via buttons combination or via "Master Clear" software in system settings ).
Enjoy
Regards
fxdjacentyfxd
Wow! you are our new ROM machine well done fxdjacentyfxd!
thats great! 140mb ram on boot with SPB! only 130mb available on 6.1 + SPB! new records! Cheers !
Regards
WM 6.5 Forever!!!! I'll test it tomorrow.
I'll update Rom table as well wit last news like yours.
Thanks again
That's just amazing. I will test ASAP. Thank you very much for your effort and your work.
olyloh6696 said:
Wow! you are our new ROM machine well done fxdjacentyfxd!
Click to expand...
Click to collapse
There is only one real "ROM machine" on the forum - mirolg . I am only software developer
and as You know I do not like cooking
olyloh6696 said:
thats great! 140mb ram on boot with SPB! only 130mb available on 6.1 + SPB! new records! Cheers !
Regards
Click to expand...
Click to collapse
He he, Oly I knew You would be pleased , You "ram eater"
Regards
fxdjacentyfxd
Pere said:
WM 6.5 Forever!!!! I'll test it tomorrow.
I'll update Rom table as well wit last news like yours.
Thanks again
Click to expand...
Click to collapse
I count on Your tests. In "static" applications it seems to be not worse than
my previous roms. My "divx banchmark" ( Matrix in 640x480 resolution ) is similar to this from previous roms. Especially I am interested in java. I only executed it to see if it works at all.
Regards
fxdjacentyfxd
Congratulations for your work.
Downloading and when can I test it.
I have no time !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A greeting.
koku37 said:
Congratulations for your work.
Downloading and when can I test it.
I have no time !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A greeting.
Click to expand...
Click to collapse
Thanks koku37. As I remember You were good tester of my previous rom
I count on You in tests too.
Regards
fxdjacentyfxd
from RomMachine to RomMachine, very,very good work!!!
ps. i like your lite battery tool and your new sddl+ tool! is a very big EVOLUTION for our tg01 device. and at now- i'm one of your greatest FAN's. RESPECT, my friend!
mirolg said:
from RomMachine to RomMachine, very,very good work!!!
ps. i like your lite battery tool and your new sddl+ tool! is a very big EVOLUTION for our tg01 device. and at now- i'm one of your greatest FAN's. RESPECT, my friend!
Click to expand...
Click to collapse
Such compliments from chef number 1.. I am proud
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Such compliments from chef number 1.. I am proud
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
yes, all is true. chef nr. 1, no,no our tg01 community need and loves all of the "little chef crew". we all specialised in different lines all for the tg01 community
cheers, miro
awesome rom but home soft button dont work for me, any tips? sorry 4 my bad english
paul89rulez said:
awesome rom but home soft button dont work for me, any tips? sorry 4 my bad english
Click to expand...
Click to collapse
Hi.
You mean enter into windows menu ? As You know it is disabled via disabling .cab in this rom ( You can unistall this cab ) so that to have more ram and because it is simply not needed with SPB shell.
Regards
fxdjacentyfxd
I'd like to test radio: 5007.0000.0321 on this ROM. Yes, yes, I know: I can change radio with awesome Miro's tool but ...well...I'm a bit lazy.... . Seriously, if any of you have already do it and can share it, I would be very gratefully
Best Regards
Pere said:
I'd like to test radio: 5007.0000.0321 on this ROM. Yes, yes, I know: I can change radio with awesome Miro's tool but ...well...I'm a bit lazy.... . Seriously, if any of you have already do it and can share it, I would be very gratefully
Best Regards
Click to expand...
Click to collapse
He he. I had dillema with what radio release this rom. 1600 I know and it works ok for me but who knows maybe 321 is better. I can prepare such rom but I will not test it. I have enough to configure my phone for work after every flashing but if You confirm after test, it is really better than 1600 I will test it too
P.S. As I well remember, some colleague wrote testing 321 radio that it generates certain error on roms different than Nokser's rom
but ...."the customer is always right"
Reagrds
fxdjacentyfxd
tx for anwer, but not the start menu, i mean the home button of phone, the left soft buttone in the low side of phone..hum.. dont know if u understand xD sorry again for my bad english, when i come back to home i post a pict with the button
paul89rulez said:
tx for anwer, but not the start menu, i mean the home button of phone, the left soft buttone in the low side of phone..hum.. dont know if u understand xD sorry again for my bad english, when i come back to home i post a pict with the button
Click to expand...
Click to collapse
Now I know, but frankly speaking I do not know whether it worked in my roms ever . I simply did not use it because I was still .... cooking. Maybe any of users of my previous roms could say more about it ? I have to check whether WM disable .cab works ok and is not responsible for this effect or maybe it is any feature possible to set in SPB shell. From my side I did not do any special to lock this button.
Regards
fxdjacentyfxd
ok, i do some test to see if i can help with this
edit: i ve removed your startmenu disable, reboot and nothing.. installe artos disable an remove start menu and same thing home softbutto still not working, maybe mirolog can explain why
paul89rulez said:
ok, i do some test to see if i can help with this
edit: i ve removed your startmenu disable, reboot and nothing.. installe artos disable an remove start menu and same thing home softbutto still not working, maybe mirolog can explain why
Click to expand...
Click to collapse
homesotbutton from spb shell not working or the winMo startmenu? my cab disabled the winMo startbutton + winMo startmenu. after remove this cab, you see the winMo startbutton + winMo startmenu. freeze your device if you like to go in today screen?
if yes check in registry hklm\software\microsoft\today if enabled is 1
mirolg said:
homesotbutton from spb shell not working or the winMo startmenu? my cab disabled the winMo startbutton + winMo startmenu. after remove this cab, you see the winMo startbutton + winMo startmenu. freeze your device if you like to go in today screen?
if yes check in registry hklm\software\microsoft\today if enabled is 1
Click to expand...
Click to collapse
mirolg, problem is that even after uninstallation of any .cab for WM disabling ( Your or Arto or my which is modification of Your cab ), soft key "home" button does not work. Maybe SPB shell does not serve it ? As I can see it has "home" icons in some places of its menus and they work - user "goes" to home. Not WM home of course but to SPB shell main "desktop".
I checked - enebled in registry is 1
regards
fxdjacentyfxd