I am using the smartkey program to hold the softkeys to enter startscreen.
Now I am looking for an option or a program to copy/paste and to put it under the message button.
Or does anybody knows a program that only gives the option to cut/copy/paste.
With this my phone would be perfectly tunned.
aage said:
I am using the smartkey program to hold the softkeys to enter startscreen.
Now I am looking for an option or a program to copy/paste and to put it under the message button.
Or does anybody knows a program that only gives the option to cut/copy/paste.
With this my phone would be perfectly tunned.
Click to expand...
Click to collapse
If the context menu of the program contains copy and paste, you can hold the center key of the 5-ways navigator to popup the context menu.
water
Hi Water,
Thanks, but not all programs have that option. That's why I like to have a program like that.
Right now i'm using Magicbutton but that doesn't have that function. GSMagic had it but I like Magicbutton better. So now I need the copy/past function.
You can try Xbar which is under the D-Pad. It opens up a screen in which you can select the running task but also shortcuts to programs of your liking and there are shortcuts ready for copy and paste and cut.
Wouter
You can use PQz to map a hardware key (I use the Windows-key) to CTRL, so that you can use ctrl-c, ctrl-v etc.
http://forum.xda-developers.com/viewtopic.php?t=33343&highlight=ctrl
I think... just speculating here.. that they are more looking for...
press button - it copies whatever is the active selection
press button again - it pastes whatever is on the clipboard
Not sure, though... ctrl+c / ctrl+v works with the SIP, with that tool it works with the hardware keyboard, and if you're working with the sip - and thus a stylus - you can often just tap-and-hold and choose copy from the context menu.
PHM Keys comes with cut copy paste.
Use a button mapper to do as ZeBoxx says, if it's what you need, and you'll have quick access to said functions.
V
Thanks,
I'm using PQZ now. With TAB as CTRL. WIN would not work together with smartkey, because hold button 1 is the same hex number as WIN.
But this program is realy good.
My Solution to this...
I have a slightly hacked up copy of PHM Keys (couldn't get it to install on my 8125, so I hacked it off of a WM2003 device) that I'm using to solve this problem.
In my Start Menu I have three icons - "Object Copy", "Object Cut", and "Object Paste" (PHM Keys) so whenever I have something highlighted I click my (smartskey modified) Start Menu soft button, scroll down a slot or three with the 5-way, and select the copy/cut/paste operation I need.
When the KB is open it's even quicker Start-o Start-b Start-j respectively. Another plus is this works in nearly EVERY situation where you can highlight something. Sometimes the other options (context menus, SIP kbds, etc.) don't work everywhere.
Now some may not want to waste three Start Menu slots, but I have Tray launch filled with my apps, still have 4 Start Menu slots available, and all my non-soft buttons are mapped to one app or another, so I'm cool with them.
Plus I have my SIP pop-up KB completely disabled (I hate it's "intrusiveness" and only use the HW KB in landscape mode) so in portrait mode I had *NO* way to copy/cut/paste and had to devise something.
Good Luck
-JMS
I've updated VJKeyPress to add -cut, -copy, -paste.
On my website.
V
Can anyone help - Is there any way of getting the Calendar, Message, Contacts and I-task buttons to respond to game key settings etc on the HX2490b as currently when you press any of the buttons (whilst within a program/game) it just launches one of the 4 hard key applications.
For example - Why does the games "Worms" work fine on my old 2210 but not on my HX2490b - none of the new WM5 games work correctly either!
=======================================================================
New version 1.2 available here
=======================================================================
=======================================================================================
DredSensor v1.1d:
=======================================================================================
Link ->: DredSensor-v1.1d
New features in v1.1d:
=====================
Let you choose which Key/Action you affect to each key.
Launcher Mode let you affect an Action for:
Double Tap event
Click event
Long click event
An icon for config tool is created in Program list.
Cache Program List for quick loading in Config window.
Fixes a few bug from v1.1, v1.1b and v1.1c
Tips:
=====
If you upgrade to this version, your config file will be cleared (sorry ).
To define a profile that applies on every applications, launch config tool and edit "Default" config.
If the key you want to affect is not listed, you can define it manually:
Type "Key:[email protected]@", with @@ = VKey code of the key you want to affect.
You can find VKey code list on : http://msdn.microsoft.com/en-us/library/bb431750.aspx
=======================================================================================
DredSensor v1.0:
=======================================================================================
=======================================================================
Reviewed on gadgetmix.com: See the article
=======================================================================
If you have tried to play a game needing left and right key on an HTC Touch Diamond, you noticed that they are 2mm wide and if you click next to it, you get back to home page or to dialing menu etc...
So I've written a prog allowing you to lock these 4 keys actions and replace it by classical key event (VK_LEFT, VK_RIGHT, ...).
In that way you can play tetris, and use "Pick-Up" and "Hang-Up" keys for going left and right.
Link ->: DredSensor
To use it, you need:
1) An HTC Touch Diamond (it's the only one i have so i can't test it on other models)
2) Install the .cab
3) Reboot your HTC
4) Run a game (or app or ...)
5) Get your stylus out and back-in, in less than 1 second
6) Click "Yes"
----- A config window opens:
7) Check that Type = "HardKeySimul"
8) Click "Ok"
Now you can use (and eventually assign) your 'Home', 'Back', 'Pick-Up' and 'Hang-Up' keys in that game/app.
Actually, the 'Pick-Up' and 'Hang-Up' keys are always defined as Left and Right events.
Have fun.
Ps:
For people interested, the other "Type" in the config window are:
- "Launcher": allow you to quicklaunch 4 app (that you define in the config wnd) when you double tap (not click, just tap) on one of those 4 keyz
- "Scroll": allow you to scroll the current window by tapping those 4 keyz panel
- "KeySimul": allow you to send left/right/up/down events by tapping those 4 keyz panel
Thx, now I can use opera mini and pie (good for mlb's wap) in full screen
Thank you very much. Great program. Now, with left and right softkey hardware buttons, I can play with my java games.
Claus72 said:
Thank you very much. Great program. Now, with left and right softkey hardware buttons, I can play with my java games.
Click to expand...
Click to collapse
Do any of them even work on the vga screen?
first of all: great app!
only thing i don't like is that now every time i pull out the stylus the phone vibrates. maybe you could make the "window-catching-thing" optional, so you have to enable it first?!? with that, the app would be perfect to me!
figured out an other problem: the "scroll-wheel-function" in opera and tomtom doesn't work anymore...
Herr_Knigge said:
first of all: great app!
only thing i don't like is that now every time i pull out the stylus the phone vibrates. maybe you could make the "window-catching-thing" optional, so you have to enable it first?!? with that, the app would be perfect to me!
figured out an other problem: the "scroll-wheel-function" in opera and tomtom doesn't work anymore...
Click to expand...
Click to collapse
Hello.
As it's a background program, making vivrate the phone is the best way i found to easlily know if it's loaded or not.
If you don't like that, you can disable it by manually editing the 'Config.ini' file in '/Program Files/DredSensor':
Go under the section you want to disable vibrator in (ex: "[Default]")
Add: "NoVibrate=1"
For the scroll problem, i didn't change scrolling system from v1.0 so are you sure it was working in v1.0 and it's no more working in v1.1?
@Dredger97
Thank´s for this wonderful tool!
Greeting
Slide
is there a wa to map home/back to A/B controller buttons? Trying to get it to work with PocketNester Thanks
Thanks
I will tried
Seems to be good. Shall download and try...
Doesn't work for all hard keys
I have the original diamond and it doesn't look like any of the key presses work.
I could really do with replacing volume and Home/Back Buttons. Do these buttons
support Long press too?
bugsykoosh said:
is there a wa to map home/back to A/B controller buttons? Trying to get it to work with PocketNester Thanks
Click to expand...
Click to collapse
If you go in PocketNester -> Option -> Controller, you can see that it's default mapped to 0xC4 and 0xC3 key codes.
So all you have to set in DredSensor is:
- Home: "Key:0xC4"
- Back: "Key:0xC3"
I tried that on super mario, it works, but the problem is that you can't press those keys and simultaneously press Left and Right so it's quite hard to play...
In fact you can map Volume Up and Down keyz to button A and B and it's much easier to play.
djfuego said:
I have the original diamond and it doesn't look like any of the key presses work.
I could really do with replacing volume and Home/Back Buttons. Do these buttons
support Long press too?
Click to expand...
Click to collapse
The actual version of DredSensor doesn't change anything to volume up/down buttons.
All it catches is Home,Back,Talk and End hard keys.
About long press,
- In "Launcher" mode, you can define action for "Long click"
- In "HardKeySimul" mode, if you make a long press to "Home", and mapped "Left" key to "Home" button, it will occure a long press on "Left" key.
I just don't seem to be able to get this to work - I follow the first post to remap the home and back keys to the softkeys, but home always takes me back to touchflo.
Are there any other things I can try, or is it just the ROM i'm using doing this?
Furbious said:
I just don't seem to be able to get this to work - I follow the first post to remap the home and back keys to the softkeys, but home always takes me back to touchflo.
Are there any other things I can try, or is it just the ROM i'm using doing this?
Click to expand...
Click to collapse
I don't think it's a ROM problem.
The 2 most common reasons for not working are:
It doesn't work if you have G-Scroll or something similar installed.
When you edit config for an App, this config only applies when "Window Title" and "ClassName" of the foreground window matches what is defined in that Config.
If it doesn't match any config, DredSensor doesn't catch your hard keys.
You can use wildcards in your Config so, for example, if the app you want to configure always changes its title, you can set "*" for window title.
everything gose well in my diamond! Thx!
just a little suggestion : as volume up/down could be very useful in some app (like a game emulator), could you make them configurable in your next version?
nice job!
Furbious said:
I just don't seem to be able to get this to work - I follow the first post to remap the home and back keys to the softkeys, but home always takes me back to touchflo.
Are there any other things I can try, or is it just the ROM i'm using doing this?
Click to expand...
Click to collapse
I make a softreset and works whit no problem, when i click home button open the program i assign.
Doesn't seem to work in Phone screen. I am not sure if it is because it is a dialog class. If this could be made to work, it would be great as when a person has multiple phone numbers you could scroll by pressing right or left key.
Thanks in advance
just tested it with tetris and it worked great. good stuff
Dredger97 said:
I don't think it's a ROM problem.
The 2 most common reasons for not working are:
It doesn't work if you have G-Scroll or something similar installed.
When you edit config for an App, this config only applies when "Window Title" and "ClassName" of the foreground window matches what is defined in that Config.
If it doesn't match any config, DredSensor doesn't catch your hard keys.
You can use wildcards in your Config so, for example, if the app you want to configure always changes its title, you can set "*" for window title.
Click to expand...
Click to collapse
I've nothing like that installed - I've tried wildcards, and soft resetting between altering them, even setting the default so that it should catch any class or window so that the home and back keys are soft keys one and two.
It's semi trapping the window and keys.......I just wonder if your app is not being fed the correct window name/class, or there's some extra characters or something that is fooling it.
Here's an example - setting home and back keys to the softkeys, with a config of * for window, and * for class.
On the touchflo screen, pressing home will take it to the phone screen (correct left softkey action), but once in the phone screen, pressing home takes it to the touchflo screen when it should go to contacts.
If I'm in any other application, it never traps the home key, and will always go back to touchflo. Disabling touchflo doesn't change this, it takes it back to the today screen.
I'm using shak's rom if anyone else can confirm they can get it to work using that one
I have discovered how to assign keymaps to the Cube FPS game (requires installed OpenGL ES drivers and the Pocket PC port of the open source first person shooter game Cube). I have attached a copy of my keymap configuration. By placing it in the DATA folder inside the cubeppc folder (replacing the old keymap), the center key (enter also works on Touch Pros) will fire (instead of jump) and the down key will bring up the menu (allowing you to actually play).
If you want to make other changes, the keys, CENTER, UP, DOWN, LEFT, RIGHT will actually work on the Touch Pro/Diamond. ESCAPE may work (End key) but there would be no way to exit the game but to soft reset your device(I have not tried this but it is reversible (just remap)). I would also recommend remapping LEFT or RIGHT to "weapon" or "weapon 2 3 4" although both will only switch between two weapons (last weapons used/picked up) and do essentially the same action. This remapping may be undesirable because of losing the ability to move sideways. I would recommend leaving one for movement to dodge enemy fire.
I have not tried remapping using any other config files and did not have success remapping to letters (Touch Pro hardware keyboard). Most other keys are for several Dell Axim Pocket PC models that this port was originally intended for. My attempts to change keys (example. from "MIDLEFT" to "SPACE" or a letter (Touch Pro hardware keyboard)) have had no effect on the game.
attack=fire
weapon or weapon 2 3 4=change between last weapons used/picked up
showmenu main=show menu
quit=quit game and return to previous app/program/launcher/Today Screen
Also attached is a shortcut (I would suggest putting it in your Games menu under your Programs menu). The short cut requires you put the whole "cubeppc" folder in My Documents on your device's storage (not Storage Card). THE SHORTCUT IS NOT REQUIRED!
nice cfg mate thanks
Oh yes i have this game i got it the other day. Does it run well ? There are other mods there too and cube 2. Have you played any multiplayer on them ?
I will check and test these out.
Got a newbie question – please don’t shoot me if it’s silly. Just got myself a HD2 and absolutely love it. Swapped the stock ROM with the „X-TREME“ ROM and everything works like a charm. Only trouble is that I now miss the <Start Menu> and the <OK> icon in the top taskbar. Hence I am wondering if those buttons were removed by design and if yes, if there is any alternative (better?) way. I’ve noticed that on some screenshots the icons appear on the bottom of the screen, but that’s not happening on my phone…
Cheeeeeeers!
You can resign yourself to using the hardware buttons (the Windows flag button is Start and the back button is OK/Close) or restore the softkeys via registry changes.
Inside [HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\BubbleTiles] set these keys to 1 to indicate the presence of hard buttons (and thus no need for softkeys) or 0 to show the softkeys:
"HardwareStartKeyEnabled"=dword:00000001
"HardwareDoneKeyEnabled"=dword:00000001
You can set these to 1 or 0 independent of each other.
I originally set mine to 1 to hide the softkeys to clear away clutter from the bottom bar. I've since set them back to 0 because AMeBa doesn't "see" the hardware back/OK/Close button and thus can't close applications. I've also used AMeBa to run Voice Command through a long press of the Windows softkey (like with the back key, AMeBa can't handle a long press of the hardware Windows key).
first of what build are you using? some roms eliminate these buttons cause you have hardware ones.
There are cab to put these back...usally
Yeah. some of the new x-treme ROM eliminated those two soft buttons because we have dedicated buttons at the bottom. Start is the middle button with windows logo, and OK would be the back button.
Thanks alot guys - I've applied the registry changes suggested and now I got my beloved buttons back
Cheeeeeeeeeeers!