Related
My ameo can fix satellites the first day i got in chicago, but from the second day, it no longer fix. it has been so for 1 week.
i use "quick gps" but the gps still doesn't work. then I changed the server where "packedEphemeris.ee" downloaded from by editing the registry, nothing changed. I've used igo,gps viewer,gps tuner etc., the satellite can be displayed around the picture of earth but they are all red and never become blue or green. ive tried hard reset but nothing changed..
I wonder what's wrong with my ameo? Is it possible that my ameo's gps module is broken? or it's just a software issue?
coolish said:
My ameo can fix satellites the first day i got in chicago, but from the second day, it no longer fix. it has been so for 1 week.
i use "quick gps" but the gps still doesn't work. then I changed the server where "packedEphemeris.ee" downloaded from by editing the registry, nothing changed. I've used igo,gps viewer,gps tuner etc., the satellite can be displayed around the picture of earth but they are all red and never become blue or green. ive tried hard reset but nothing changed..
I wonder what's wrong with my ameo? Is it possible that my ameo's gps module is broken? or it's just a software issue?
Click to expand...
Click to collapse
I have read here somewhere that the GPS Now causes problems with the GPS and caused some lock-ups requiring a soft reset. See if you can find the thread....(hint....search...LOL ) that discusses it. I had also heard that the Ameo had a GPS problem.....that thread is here too.....good luck.
Hope this helps...........Later
hdbueller said:
I have read here somewhere that the GPS Now causes problems with the GPS and caused some lock-ups requiring a soft reset. See if you can find the thread....(hint....search...LOL ) that discusses it. I had also heard that the Ameo had a GPS problem.....that thread is here too.....good luck.
Hope this helps...........Later
Click to expand...
Click to collapse
i have done soft reset many times and hard reset for several times,nothing changed..i have tried setting the gps program port to com4 or com5 and just like what i did when the gps works fine.The applications can connect to the port and find the gps but it just cant fix a usable signal..
here is the screenshot
please help..
Try GPSView
I find that the best program for getting a lock, it normally works in a few seconds. Also, make sure when you turn it on you are in a WIDE open area. You need a good view of the sky in all directions to get initial lock. Wait until its happily locked onto 4 or 5 sats before fiddling or moving.
i have used gps viewer, and i do test it outdoor in open air, but it just cant get fix in hours.
here is the screenshot while using gps view
Not sure if it will work with your software, but I find that my Ameo is far happier using com1 for the GPS port - I believe this is the software port and com4 is hardware. With com1 I can use multiple gps apps at the same time, e.g. Tomtom and Reperion. If the device has not been used for a while, it can sometimes take a few minutes to get a lock, but no longer than 3-4mins. What I generally do is set one of the GPS apps running as I'm getting my keys coat on e.t.c., then by the time I've installed the Ameo in the car and done my 'preflight checks', its got a fix and I can go.
But deffo try com1 if you have that option.
cant download quick gps
hi can i get some help. i got my new ameo but cant seem to get the gps working. when i tap quickgps all that comes up is download and nothing happens. what might be the reason. do i need to get another gps programme installed?
Yes.
QuickGPS is only for downloading sat data, not for actual GPS tracking use!
GoogleMaps is free and quite good. Microsoft Live search same.
Look for GPSView for ppc as well...
Have fun.
how do you make googlemap work? i mean the track function.
Turn off the MS software GPS management, then get the ABSOLUTE LATEST googlemaps mobile.
I think you set the com port manualy in google, com4 or com5 9600
Its best to use the free GPSView to test out the com settings first to make sure you get the right ones. When you get the right port you will SEE the gps data appear in the text box proving its working. This program gets locks quicker too.
When youve got a lock with that, quit it, then run google and use the same com settings.
wilben said:
hi can i get some help. i got my new ameo but cant seem to get the gps working. when i tap quickgps all that comes up is download and nothing happens. what might be the reason. do i need to get another gps programme installed?
Click to expand...
Click to collapse
i seem to have a peculiar issue as well. i have had my Ameo for 3 months now and GPS download (to get a fix) my TOMTOM 6 have both worked fine. now i try to download the gps data through quickgps, it says "connecting" and after a while returns an error message " connection failed, please try again later" can anyone help please?
Using TomTom v7.450 (build 9028) the device can work fine for hours, but sometimes I start Tomtom and it will find a GPS signal and then immediately drop it again.
When I look at the satellite information, it will do this...
1. No GPS device!
2. Poor signal, are you indoors?
3. Built-in GPS receiver
4. No GPS device!
5. Poor signal, are you indoors?
6. Built-in GPS receiver
7. No GPS device!
and repeat..
You can view a video showing this effect
@ youtube: http://uk.youtube.com/watch?v=VRkPmhbst0o
@ http/avi: http://phat.nooblet.org/htc.touch.hd_tomtom.gps.avi
Hi, I've the same problem on my Blackstone, GPS works well for days bu from today the GPS signal result discontinuous with any navigation software like Tomtom(various versions), Trackypro and iGO8...any idea? Thanks
I had the similar problem when I first installed TomTom. Which settings are you using? Because I used "built-in GPS" for TomTom and had the above problem. When I changed it to "Other NMEA GPS" with baud rate at 11200 ()or whatever the max is + COM4 then gps started working like a charm. Since then no signal drops, no lag and very quick fix. Not sure if it is just by chance or is it a real fix for the above problem, but worth trying as its working for me. However, it has been 2 days only. Not sure if after a while I will have this problem or not. I am using Tom Tom 7.910 with maps 6.75.
Can You try to set the hardware port from <None> to COM9? Seems work better, the GPS signal still present...but for now I'm at home
I have more or less the same problem !
Using TomTom v7.450 (build 9028) the device works fine the 1st week, but now, I start Tomtom it xan't find GPS device !
I tried to reinstall all without success...
I also tried all the COM available !
using tomtom 7 with NMEA com 4 max baud rate. Works just fine. 8 or 9 sats locked on constantly in open areas
I'm having the same problem, although I don't have TomTom 7. But it doesn't seem to be just TomTom that's having trouble finding the GPS (and when it does, it'll never get a fix).
The Google Maps application also gives me the "No GPS found" attitude.
I've installed the HTC GPS Tool, which does seem to find a bunch of satellites, but they all stay no-fix-reddish.
Are there any guidelines on how to setup the GPS on this thing? I find it a bit strange that my settings menu only lists an option "External GPS", and no "Internal/Built-In GPS".
Can confirm that the dropping of GPS is in other applications.
I use zürich map from Lonely Planet (sure its form 2003) and it will drop the signal in the open.
Have a feeling its internal on our devices.
One possibility is A-GPS.
It is Disabled by default, but it is possible that with tools like HD Tweak or Advanced Config Tool, you, even by being unaware of it, you activated (or better : enabled) it.
To me, it was a winner : after re-disabling A-GPS, my GPS started to be stable again, no matter what port I choosed and how I configured the Navigator program.
Give it a try, could be the solution that works for you
Hi there,
I've just picked up my lovely HTC Touch HD - I'd like to buy the TomTom 7 and the correct maps to go with it to allow it to work.
Can someone please tell me where I can go to stick my Visa card details into and buy please! i'm pretty confused on the TT website and on here there's allsorts of version numbers etc mentioned!
I'd just like to have a stable running TT on my Touch!
Any chance of also having the US & Canada maps working as well as the UK maps ?
Thanks !
Dennis! West London UK!
This is not a TomTom issue. I have same problem with IGo and VisualGPSce.
I use to resolve this issue this way (in IGo or VisualGPS) : I change the baudrate in GPS configuration. Switching 19200 to 38400, or reverse, or whatever : the GPS locks and is stable after few baudrate switches.
Theres some reports that the default "sleep" timeout for GPS is 1 second. Apparently the Microsoft Intermediate Driver only updates every 1 second so it could just miss it and go to sleep!
Try changing registry entry to 2000 (milliseconds)...
HKLM->system->currentcontrolset->GPSIntermediate Driver->Drivers-> SleepOnNoData
Tirinoarim said:
Theres some reports that the default "sleep" timeout for GPS is 1 second. Apparently the Microsoft Intermediate Driver only updates every 1 second so it could just miss it and go to sleep!
Try changing registry entry to 2000 (milliseconds)...
HKLM->system->currentcontrolset->GPSIntermediate Driver->Drivers-> SleepOnNoData
Click to expand...
Click to collapse
Already did it (currently set to 2500). But changes nothing (even after soft reset) : GPS keeps deconnecting/reconnecting as described (not every time; one in a while..).
Thanks anyways !
Just out of interest, do you have MobileJustice installed by any chance?
Absolutly not. Nor any software of this type, nor any software who can possibly take GPS in background..
I had the problem of TomTom getting satelites and then dropping them and saying it couldn't find the gps.
Disabling agps (quick gps) via advance config seemed to sort out the problem
AGPS is *not* quickGPS in my understanding. But this is unclear. For a proof, AGPS comes disabled by default, but quickGPS works out of the box. Can someone who knows for sure, precisely state if AGS and quickGPS are the same thing or not ?
I have disabled AGPS also with HD tweak (but quickGPS stills work..), and I have regulary (2 out of 3 times) this problem.
I had the same problem. Disabling the AGPS seems to have worked but I will wait for the data to expire before confirming.
The problem seems to be when I have poor GPS reception AND poor GSM. They seem to be calling upon each other for corrections but never resolve.
If this is the solution I will just rely on QuickGPS alone which has worked fine for years with TTN6.
Edit: I can now confirm disabling AGPS solved my problem.
had TTN7 running for a few days now.
Can't find the built in GPS. Having to set it to other Bluetooth GPS Receiver.
A bit hit and miss with signal / getting a fix.
I have turned off AGPS as well. Going to try out some of the settings you all have put up tomorrow.
AlexEv said:
had TTN7 running for a few days now.
Can't find the built in GPS. Having to set it to other Bluetooth GPS Receiver.
A bit hit and miss with signal / getting a fix.
I have turned off AGPS as well. Going to try out some of the settings you all have put up tomorrow.
Click to expand...
Click to collapse
Working great ...
AGPS off - Using COM 4
Hi
I wonder if someone has this same problem and know how to solve it...
Most of the times that i try to use tomtom or wayfinder, the gps can't get a fix, it locks on to the satelites with no problem, but only for 1/2 seconds, then loses the position and after some 10s it regains the position again for another 1/2s and loses it again...
The only i way can get the gps to function properly again is by turning the phone off, remove the battery and turn it back on. Then it works, but if i turn off tomtom and try to use wayfinder the problem returns, and sometimes also happens after i close tomtom and try to use it again later...
It's driving me nuts i did a hard reset and after instaling my programs the problem remains. It seems google maps works ok, tho i'm not sure as the program doesn't have the option to see to how many satelites it's locked on.
any ideas? I doubt it's from the programs i install cause the ones i use i dw them all from this forum...
Thanks
its probably your location, the satellites might not be abundant enough. GPS works fine for me, I'm using IGO8.
no, it's not that, cause when it happens i remove the battery and reinsert and turn on the phone again, and after doing that procedure the gps will lock with some 6/7 satellites and will not fail as long as i don't turn off the first program i try to use the gps with ...
If i use tomtom after doing that battery removal procedure, it will work flawlessly, if i turn off tomtom and use it right after, it still works ok, but, if i turn off tomtom and after i use wayfinder, or if i only use tomtom again after some hours, it will have that problem (and vice-versa), it does find the same satellites and gets the coordinates (in tomtom they get those blue level bars), but only for very brief moments every 10/15s which ofc makes it impossible to correctly use the navigation program
If the gps was broken or something it wouldn't work ok after i removed the battery... i guess i'll try another hard reset
Try to disable A-GPS.
possible corrupt quick gps file , run quick gps and downoad new file.
Hi,
If you have used Advanced Config and enabled A-GPS, disable it as it will cause issues with TomTom and other GPS navigation software.
Later...
hehe got it working now, i had tried that before, but seems i was using an older version of advanced config or something, i downloaded a new version, disabled a-gps and now the gps is working fine thanks for the help
Re elusivo
Elusivo, could post how you fixed your problem? Because I currently have the same problem, but no Idea how to fix it. You said something about using a new configuration with and old one? Can you please explain?
Search for the program 'Advanced Config' on the forum and install it and then run it. Go to the GPS section and if A-GPS is enabled disable it. A-GPS uses the phone masts to triangulate and get your position which causes havoc when you are trying to use the internal GPS
Thanks for that......Problem solved
hello
I do have the saame issue as you with my gps. I install Igo, tomtom, gps htc tools and gps skinner and it is always 20/30sec to get a fix but it loses it 1 sec after.
If I disable A-Gps, it will increase the time to fix satellites or is it just used for quiick gps to download ephemerids???.
I think we have to ask Customer support because it is unacceptable for such an ewxpensive phone to have to disable functionalities such as A-gps to get it to work
pyrofrag said:
If I disable A-Gps, it will increase the time to fix satellites or is it just used for quiick gps to download ephemerids???
Click to expand...
Click to collapse
A-GPS uses Cell Towers to guess where you are. It is not (on these phones anyway) linked to Quick GPS which is a lot better at getting you a fix on a cold start.
As others have mentioned for some reason with A-GPS enabled TomTom doesn't like it, and I don't know of any real reason to use it.
@artesea : I don't get why you said "I don't know of any real reason to use it".
Are you talking about Tomtom or about A-GPS function ??
Because if you are speaking about Tomtom, I do have similar problem with all software using GPS.
And if you disable A-GPS function you are going to have to wait may be 3 minutes or more to get a fix instead of 40seconds so I think this is a real reason to use it...
No I'm talking about A-GPS.
Have you tried a cold start using Quick GPS, I can get a location in under 30 seconds.
So I disable A-GPS and I got fix within 30/40 seconds and I never lost it.
I just think it is absolutely unbearable to have to disable A-GPS to get your GPS working properly. This mobile phone cost 700€
I just would like to know what is protocol version from people who can have A-GPS working properly.
Rom version : 1.02.933.3
Radio version : 52.43.25.24W
So you've gone from 20/30 seconds to get a fix but then it drops, to 30/40 seconds to get a fix and it work and you STILL have a problem???
Maybe there is a reason why A-GPS is disabled by default!
No when I disable A-GPS I don't have problem any more.
I just remembered that I may have enable A-GPS through Advanced Config.
Hard reset do not change this, I though it was a registry editor value but apparently it is more than that.
Anyway it is not Xperia X1 issue but Advanced Config compatibility with Xperia X1
having problems with gps now too :/ later it was working brilliant (fix in no time), but now, most of the time i dont even see any satellite...
but sometimes, especially after reset, it shows like 5-6 satellites, but cant get fix, after some time sats just disappear :X tried disabling/enabling a-gps, with/without quick gps file downloaded, still the same... and no answer anywhere...
i guess i'll have to use my warranty and get it serviced :/
edit: today reflashed radio one more time (as yesterday after like 5 radio flashes, i ended on the original version, not the newest one) and suddenly gps is working hope it lasts...
At first gps worked fine with tomtom and g.maps.
The problem started when the gps signal became losted and recovered every second or so. On and Off continuosly.
Other days worked everything right. And now It seems that there is no gps at all.
Tomtom alert: "no gps device" and g.maps dont get any satelite
So, Is this a hardware problem?
Could you help?
Thanks
It sounds like the Assisted GPS problem, make sure its switched off.
Settings->System->AGPS Settings
Uncheck the box and save the settings
Steve
I dont have this option
About gps, I have only "External GPS" at "settings"
Another way to swicht it off?
you can use the Advanced Config Tool or Tweak HD
Steve
I get this too, so will see if turning off AGPS helps.
Another way I found is tha if I run Google Maps, wait for that to get a lock, anything else taht uses GPS then works fine.
I tried HD Tweak, and switched A-gps off (option 18.5)
But nothing changes
There is no gps available for gmaps and tomtom
Any other ideas?
Thanks
Problem solved, I was really , so:
Backup & Hard reset, ... or better, fry it with a new ROM, now I have this one:
Dutty's HTC HD (BlackStone) ROM V2 XTREME
You can find it, of course, in this same great forum
It seems to be much better than original, faster, more complete...
gps and everything working fine...
I recommend it
I've had the imagio for about 2 weeks not. and can't get the GPS to work. I've tried every reg edit I can't find. Tried useing GPSID.dll rather then GPSID_HTC.dll. I tried installing the GPSModDrivers. Ran QuickGPS. Done Hard resets and half a dozen flashes. Nothing. The only program that works in Verizon's VZ Nav. TomTom, Google maps, Bing never get any sat lock. I'd say it was my phone but my dad's and the floor model at our Verizon store all have the same problems. The guy at Verizon said it was an issue with a lot of them and HTC was working on an updated rom for it. But that could be crap. Any ideas?
You probably have a faulty unit - my GPS always locks pretty quickly.
Agreed. My GPS works flawlessly. I use it all the time with TrackMe.
Never had the first problem with the GPS , works great with Google and Bing maps. Yours Dad's phone must be defective , swap it out for a new one.
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Sorry for the double post working from device.
Keep in mind that some of the things you may have installed to correct the issue may have negatively affect registry settings, sync your contacts and do a hard reset on the device. And do not set up VZ nav when you bring it up.
Then do this:
Install Google maps
Make Sure your Location Setting is "on" in the phone settings. If it is on then toggle it to "911" hit okay on upper right corner then go back into it and toggle it back on and hit okay.
Soft Reset and let boat up completely
Open Google Maps And make sure USE GPS is not checked.
Click "X" in top corner to let it run in the background
Run Quick GPS and select "Download"
Open Google Maps again and select "USE GPS" make sure you have a clear view of the sky and it should take less than one minute to lock
Sometimes a soft reset is required to get a gps lock.
Actually, It is a known issue with the particular gpsone chipset. It's an issue with location caching with agps, but this phone comes stock with agps disabled. However, I have not heard that many complaints on this forum, of course not everybody uses gps. If you soft reset before you try and use you shouldn't have issues. Trust me this is my third HTC touch series phone with this issue (diamond, touch pro, imagio). With my imagio it suddenly stopped having this issue, wierd. I used to use a program called HTC gps tool on my touch pro that would clear the cache for you without having to soft reset each time you might want to do some searching, not sure if it works with wvga screens.
bastukee said:
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Click to expand...
Click to collapse
I concur if it was a hardware issue VZ nav wouldn't work.
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
One of my friends had the same problem as you mentioned. I asked him to do a hard reset and after a HR, the GPS has been working smoothly. Please try a HR!
I have no complain about my Imagio's GPS because it works much more than I expected. I can get 7-8 sattelites fixed in house, near the window where my old phone Touch HD could not fix any sattlelite.
I'm about to try bastukee suggestion. Giakhoa are you saying do a hard reset after a hard reset?
bastukee This is what I got, any ideas?
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,*31
$GPGLL,,,,,,A*11
$GPGSA,A,1,,,,,,,,,,,,,50.00,50.00,50.00*35
bastukee said:
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
Click to expand...
Click to collapse
Let me know how this pans out. I haven't used this new version but it will allow you to play around with some setting my gps locks instantly so I'm not going to mess with it I just now it works on vga, you might need a screen rotate app to read all settings.
Original Post where I found it is here
Sweeny, Program works nice. it's an easier way to see the data then the program bastukee gave me. But sadly I don't know what half the options do and it still gives me the same date I posted in #12. Thoughts anyone?
That's exactly what you would get when satelites are not being seen, in fact you can't even see a Clock. Once I finish this 3 day trip to India and settle I will try that program and see how my settings look like and post screenies. "I'm a zombie atm"
Thanks for the help. I'm going crazy trying to get this to work.
While bastukee is on his trip, anyone else have any ideas?
hackthis02 said:
While bastukee is on his trip, anyone else have any ideas?
Click to expand...
Click to collapse
be sure ur using com port 4
There's where I got the data that matched the data bastukee showed me. And the one in the settings.
I might be pointing out the obvious but, did you try this outside? After like a minute?