i am on the bed and almost sleep when i wad planning route for tomorrow i notice it got me approximate location without gps
seems only work with wifi though...
they ve added IP geolocalisation to GoogleMaps
it shuld be because of that
not sure about that but today I was in a place without wifi network and once I turn on wifi after awhile it is able to get approximate location.
I will try to do more testing later
Related
Is there a way to set my Diamond to turn on the 3G connection when I use Tomtom? It turns on when I go into IE and Opera, but when i go to Tomtom it doesn't activate.
Thanks for the help
as far as I know, you dont need 3g or any internet connection for that matter when using TomTom. As long as you have TomTom and the proper maps installed, you can just get all the data you need via your internal GPS reciever.
Ive been connecting to 8-14 gps satellites with the nodata cab installed and all toggled to off, as well as schap's advanced config tool with all network settings to off.
im using 3g connection to get traffic update,you cant receive it with the internal gps receiver!
just try to do traffic update and be sure that the settings are correct ,wap or something instead of your isp
Tnanks for the replies. I could be wrong here and totally off my rocker, but I thought that I get faster signal lock when I have 3G on.
Again, could be way off and I was just seeing things.
djcedric is right about the traffic update. Cvrle1, as far as i know, you are wrong about the faster signal lock. If you use the QuickGPS app via 3G or wifi or whatever data connection you use, it downloads the newest satellite data to your phone, giving a very fast signal lock. After I have the QuickGPS settings it takes me about 1-3 seconds to find all the satellites.
Note that the quickGPS settings are only valid for a week, when it expires you have to run QuickGPS again, otherwise it takes considerably longer to find the satellites.
Hope this helps.
is there a app that turns off/disables the wifi when you leave the range? blackberry had an app for this and am hopeful android does too but i cant seem to find any so was wondering if anyone knows of one.
I'm going to bump this because i've been looking for this same program.
i think juicedefender (the payed ultimatejuice actually) claims to do this? it never worked for me though, but apparently it does for other people. give it a shot
i found 1 that sounds like it would of worked but cant find...
Sanga Wifi Enabler will automatically enable your wifi adapter only on those
locations where you actually use it.
When you are at a place where you don't regularly use your wifi adapter, Sanga Wifi Enabler
will turn off your adapter, thus greatly improving battery life.
Includes also bluetooth management.
also found and tried this BUT i didnt see it turn off my wifi when i went in town and noticed my GPS never stopped so i had to turn it off because i felt that along with my unused wifi being on i was using gps non stop...
Wifi Auto Enabler
Active or desactive automaticly Wifi in one or many zones saved . This soft not use Gps for save battery but use Gsm location .
(CELLULAR ( GSM ) LOCALISATION MUST BE ACTIVED ON PHONE PARAMETERS )
I use one called Y5 it turns off and on my wifi based on my location. It seems to work well.
wick12345 said:
I use one called Y5 it turns off and on my wifi based on my location. It seems to work well.
Click to expand...
Click to collapse
now this looks like it might work! many thanks.
i figure the best way to make a working app is to save my location via cell towers around me like how phones without gps can guess your location within a area by triangulating the location. saving that specific location on an app just monitoring not using gps sounds like it might do better on battery with check ever so often (30min,1hr,...). once my location saved and i am in it the app triggers on the wifi. if im out of the area it truns the wifi off. im just sayin heh.
Just got my Droid 2 the other day, first Android phone or smart phone for that matter.
Was wondering if anyone knew why google maps or anything that uses my GPS location is always slightly inaccurate?
For instance I work on a main road through a strip of restaurants and shops and it showed my location as across the main road and down a side road a few blocks, it clearly showed the nearby streets and was close but where it put the icon I was obviously not there.
Same thing happens with my weather app, every now and then it says I am in the next town over from where I really am.
Whats up? Anyone else have this problem?
yes unfortunately, my navigation app is next to useless. Always end up walking a block.
Would really like some input on this!
An update:
I deliver pizza (still in school okay ) and I used my maps to just show the location of a house that was pretty far away at the farthest point of our range. I put in the address correctly and it showed the house about 5 miles off from where it really was, but somehow still on the same road.
This is pretty unacceptable to me as a driver, I was hoping to be able to put my phone and GPS to good use, but for now it is far from working correctly.
Hi
Mine works great it's right on you have to turn on the sats not just the cell towers.
Okay, so after some intense Googlage, it seems like there are THREE different ways a modern android froyo device can get your position...
It triangulates GPS satellites, Cell Phone towers, and WIRELESS networks...
I believe Google has a database of known wifi hotspots from driving around in the street view truck.
Apparently the phone trys to average a position between all three? Either way, the WIFI triangulation is known to be inaccurate and throws the phone off.
Anyways, if you use the stock froyo power switch widget do the following to get best results:
1. enable WIFI and GPS via the widget
2. navigate to main settings screen
3. select Location & Security settings
4. DISABLE "Use wireless networks"
5. ENABLE "Use GPS satellites"
6. ENABLE "Assisted GPS"
If you still have issues, try calibrating your compass before you set off for a trip or are trying to use Google maps to get an exact location.
After changing these settings, you can go back to the power switch widget and disable GPS and WIFI if you'd like. anytime you need to use a location based app, just enable GPS via the widget and launch your app!
Anyone else have problems using the GPS toggle widget? (Either Froyo stock or the Moto one)
When I turn off GPS, it disables all three options under Location & Security. Weird, but not too big of a deal as long as it would restore them when I power it back on... but it doesn't. When I re-enable GPS, ONLY the "Use GPS satellites" option is re-enabled, regardless of the state the other options were in originally. Both aGPS and "wireless networks" options stay disabled and I have to manually get back to settings and re-enable them...
Am I special or do other people get this with the D2?
I was sitting the Hospital the other day, wondering where I was so I turned on my maps & sure enough it showed I was right in the middle of the building, even showing the building! Found out where I was!
teeBOMB said:
Okay, so after some intense Googlage, it seems like there are THREE different ways a modern android froyo device can get your position...
It triangulates GPS satellites, Cell Phone towers, and WIRELESS networks...
I believe Google has a database of known wifi hotspots from driving around in the street view truck.
Apparently the phone trys to average a position between all three? Either way, the WIFI triangulation is known to be inaccurate and throws the phone off.
Anyways, if you use the stock froyo power switch widget do the following to get best results:
1. enable WIFI and GPS via the widget
2. navigate to main settings screen
3. select Location & Security settings
4. DISABLE "Use wireless networks"
5. ENABLE "Use GPS satellites"
6. ENABLE "Assisted GPS"
If you still have issues, try calibrating your compass before you set off for a trip or are trying to use Google maps to get an exact location.
After changing these settings, you can go back to the power switch widget and disable GPS and WIFI if you'd like. anytime you need to use a location based app, just enable GPS via the widget and launch your app!
Click to expand...
Click to collapse
This fixed it for me, thanks! For some reason I thought the GPS would always be on, I suppose I do like that I can turn it off now though.
Wanted to add that if you leave all that GPS on even when your charging you'll get an email alert that you have it on, another words you are being monitored. Caught me by surprise so I turned it off for a few minutes of privacy.
anonymous-x said:
Wanted to add that if you leave all that GPS on even when your charging you'll get an email alert that you have it on, another words you are being monitored. Caught me by surprise so I turned it off for a few minutes of privacy.
Click to expand...
Click to collapse
Uh, no.
You get an e-mail when you enable Google Latitude, which is completely separate from the GPS system itself. Google Latitude can be turned on and off from "inside" of Google Maps.
Yes & I have no complaints using those apps but when I'm home it should know & turning them off saves battery & I also charge it.
I used to trust Flexilis which changed it's name to Lookout but when I tested that last night & today it's locating my phone at either the west or east tower which are more than 5000 meters away (but they are a good free back-up).
Hi guys,
I have some trouble with GPS, it's take very very very long time to establish appropriate connection to some satellites. On Windows mobile there was app which download data about positions satellites from INTERNET and speed up the connection process. Then have exist some this solution for android platform? and one more thing, have some soft which can show satellites connected etc (not need any navigation or compass just some thing for verify)..
Any ideas?
Volis said:
Hi guys,
I have some trouble with GPS, it's take very very very long time to establish appropriate connection to some satellites. On Windows mobile there was app which download data about positions satellites from INTERNET and speed up the connection process. Then have exist some this solution for android platform? and one more thing, have some soft which can show satellites connected etc (not need any navigation or compass just some thing for verify)..
Any ideas?
Click to expand...
Click to collapse
Search for "gps.config"!
Download tis app called gps status...you can download satellites thru its settings or you can reset ur gps data in it...downloading agps data dramatically improves locking speed..check it out...hope it helps
Setings> GPS&Sensors > Auto-download agps data
I am having issues with some builds sometimes to get a fix.
Some android builds make WM GPS not to fix anymore even. The only way to make it work on WM again is to re-flash your radio and not run android again (Android seems to do something to the GPS that makes it stop working on WM).
Perhaps I am wrong but this is my observation.
nuclearfissure said:
Download tis app called gps status...you can download satellites thru its settings or you can reset ur gps data in it...downloading agps data dramatically improves locking speed..check it out...hope it helps
Setings> GPS&Sensors > Auto-download agps data
Click to expand...
Click to collapse
Yep looks that..
Thanks, it worked very well for me.
I have also raised this question previously.
With GPS's there are two additional technologies that help with speeding up a lock.
The first often known as QuickGPS. Normally when you GPS finally find its first satellite it needs to download a lot of satellite information including where all the other satellites are in relationship. This can take a minute or so and if it is interrupted will need to restart. Thats why you get a quicker lock when stationary versus moving. What QuickGPS does is download this information via the internet and store it locally.
The second is A-GPS. When your GPS starts it is listening trying to find anyone of over 30 satellites. This can take time. Once it find one satellite it then needs to repeat for another 2 before being able to identify where it is and what other satellites are in the area (From Step 1). What A-GPS does is find out where you are via cell sites etc. Once it has an approx location it then refers to the QuickGPS data to then workout what satellites are in the area. In then proceeds to only try to lock on local ones which is a lot quicker.
All the fixes for the HD2 gps relate to updating the NTP server setting in the GPS conf file. The current setting is fine however refers to an american time server. End of the day it is still going to give you a time sync to within a few milliseconds. Refering to a local NTP (Time Server) will give the exact same data.
Waste of time.
I believe the slow GPS lock is due to one of these technogies not working. I suspect it is a-GPS however have yet to confirm either way that the GPD data is being downloaded and saved in the right place.
Hope this helps.
Yes, I thinking primary about the fist option QuickGPS.. I was able on my HD2 wit win get the GPS lock for 7-10 satelelites in let then 30 second.. without that 5-10 minutes, then I thing is very userfull to have it somehow working on android too..
I have been doing a lot of testing due to the frustration of locations locking me very slow using Maps...
When I disable Wifi & Mobile Networks in "Location" and just have GPS & Verizon I get a faster lock with Maps. Although both wee originally checked I feel that Maps tends to wait for WiFi & Mobile Networks over GPS which has fixed location... When both are checked in LOCATION I can see GPS has a lock and can see that with GPS Scan I have lots of sats. locked... But I still have the Maps pointer with a big blue circle trying to lock my location....waiting for it to find me exactly
If in the same example I just use GPS & Verizon Networks Maps locks my location fast since the sats are found. I would leave it this way but without the other checked for Wifi & Mobile Networks it hurts apps that need location info.
I tend to have WiFi off when not at home and I have found with all options checked in LOCATION and I turn WiFi on while on the road I do get a bit...a BIT faster lock but still so far GPS solo (alone) is far faster...
Any thoughts on this or other people experiences..??
I am rooted on Beans rom...