I use my Hero in the car for sat nav, using Copilot. I also connect it via bluetooth to the stereo to give me hands-free calling.
The problem I have is that when I do, the sat nav voice doesn't come out of the speaker of the phone, but is routed to the stereo. I can hear it when I select bluetooth as the source on the stereo, but this means that I can't listen to the radio/CD/ipod and hear the sat nav directions.
I used to have exactly the same issue using TomTom on Windows Mobile, however there was an option there when it connected to the stereo to only use it as a headset, not for wireless music. I can't seem to find this option on the Hero.
There is also the known issue that the Hero doesn't support transfer of contacts over bluetooth - that's annoying but I can live with it, however the problem above is a real pain. Any ideas?
Think I found it - once you have paired a device, click and hold it under Bluetooth settings, then you have the option media - unclick this and all should be well! Still need to test it though.
Another method,
On my bluetooth car stereo I can "discnct Audio" seperately from "discnct Handsfree" and "discnct Phone"
Just FYI.
Related
I just bought a headset for my Atom Exec and I can't work it all out, I want to listen to music from the memory card so I have set the bluetooth to Hands Free, Wireless Stereo and headset, all three are ticked. All is working fine but the only problem I have is when the phone rings you can only here it through the stereo headphones which makes sence but I can see this causing problems if I put the headphones down, I will miss calls as I want hear the phone ringing. Is there a way to make the phone ring also threw the speaker on the phone as well while using the headphones?
Unfortunately I don't think so. If you turn the Stereo Headset profile on all sound is routed to the headset. If someone knows how it would be great.
What you can do instead is set the phone to vibra + ring mode so that if you don't have the headset on, at least the phone will still shake.
hi Seal,
which bluetooth headset did you get? i'm asking because i just got the atom (not exec) and can't get the BT to work as a wireless headset - it only works when making calls.
also, you mentioned 'wireless stereo' checkbox, i don't see this option in the atom but it could be an exec feature.
thanks.
Hi, I bought the Plantronics, I use them every day and love them, it is such a great thing to not have wires hanging around.
http://www.plantronics.com/australia/aus/products/cat5180067/cat5620033/prod29780013
"I has an Atom", and I also have a mono, ordinary Bluetooth headset (Planex BT-03HS).
Seal: try turning off the Wireless Stereo profile, then getting this program called BlueMusic by Teksoft - it has an option you can uncheck that will allow the ringtone to come through its original source instead, while still routing music through your BT.
Yes, the program can do this even in unlimited trial mode - however, it only puts your music back on the BT band after a call in full-mode. I have no idea if this will work on stereo headphones like yours, but it's worth a shot.
Slamming_Sammy: With BlueMusic I can pipe stuff from TCPMP to bluetooth headset - which supports only handsfree - just fine, whilst still not missing a call. BlueMusic emulates the A2DP protocol so your phone doesn't have to. There's actually a free binary out there called BTAudio (which Bluemusic is based on), but its less stable than Bluemusic when it comes to disconnects and receiving calls.
Oh, and by the way, the Atom does support Wireless Stereo (A2DP). However, you can ONLY see it if your bluetooth headset has the profile as well (mine doesn't by the way). AFAIK only stereo headsets have this; even the newest BT2.0 mono headsets don't.
thanks a lot Ultimate. I was just about to try btaudio which by the way, works great, so I won't try bluemusic yet. so you're saying if my BT headphone is A2DP capable then I wouldn't need to run btaudio to route audio to my headset?
thanks.
Yes, that's what I'm saying.
Bluetooth stereo headsets are expensive, tho, AND the Atom is known to have dodgy A2DP support (except with BT2.0 devices), so you might want to hold out on the purchase.
I want to use my TD2 with my bluetooth handsfree set, but it starts the mediaplayer, everytime a connection was established. Is there a way to prevent windows mobile to start the mediaplayer in this szenario?
Tube
I have the same issue, but its when pairing with my car stereo (Bluetooth handfree), but it also start streaming music through the line1 connection to my car stereo !!!
Funny I always wanted to do this, but could not, so went the integrated Ipod route, now I can I don't bloody want it.
Anyway, so far no solution
Same story to me. Also issue's bluetooth. when i want to controll my phone with bluetooth, it starts mediaplayer automaticly.
Hello, does anyone have a solution for this problem? my girlfriend has the same problem.
Have you tried disabling the "wireless stereo" (A2DP) service? Go to Comms manager-Bluetooth-Advanced, then tap and hold on the offending item till the menu comes up, choose "edit", then uncheck "Wireless stereo", leaving just the handsfree profile checked.
I'm assuming you're not interested in the stereo music function, of course!
Already tried that, if you do that you lose BT to the car.
Odd as there are three connections:
- Hands free;
- Wireless stereo;
- Serial port.
Trying any combination aside from handsfree & wireless stereo on, results in losing BT via the car stereo
obsydian said:
Already tried that, if you do that you lose BT to the car.
Odd as there are three connections:
- Hands free;
- Wireless stereo;
- Serial port.
Trying any combination aside from handsfree & wireless stereo on, results in losing BT via the car stereo
Click to expand...
Click to collapse
Have you tried pairing it again from scratch rather than modifying the existing profile? If you delete the car stereo from the list, and then re-pair them using the windows pairing dialogue (rather than the TF3D one) I think you get the chance to specify right from the start which profiles you want to use before you connect,if I remember right.
You might even need to delete the TD2's registration info in your car stereo, if possible, either through the menu of the stereo, or by registering another basic phone before trying the TD2 again. This would work if your car stereo can only store the details of one bluetooth device at a time.
As a last resort you could try disabling A2DP on the TD2 through the registry.
Bluetooth has come a long way, I remember when it was complete crap, now it usually goes smoothly, but every now and then the crap side shows up again and causes massive frustration. I've got a Parrot Party speaker, which when there's a break of more than 15 seconds or so in the music from the TD2, the connection lapses. It still looks like it's connected, on both units, but it's not. You have to turn the speaker off, close the music player app, then re-link both for it to work again. I'm sorry it's off-topic, just venting about the "crap side" of Bluetooth.
Pete_S said:
Have you tried pairing it again from scratch rather than modifying the existing profile? If you delete the car stereo from the list, and then re-pair them using the windows pairing dialogue (rather than the TF3D one) I think you get the chance to specify right from the start which profiles you want to use before you connect,if I remember right.
You might even need to delete the TD2's registration info in your car stereo, if possible, either through the menu of the stereo, or by registering another basic phone before trying the TD2 again. This would work if your car stereo can only store the details of one bluetooth device at a time.
As a last resort you could try disabling A2DP on the TD2 through the registry.
Bluetooth has come a long way, I remember when it was complete crap, now it usually goes smoothly, but every now and then the crap side shows up again and causes massive frustration. I've got a Parrot Party speaker, which when there's a break of more than 15 seconds or so in the music from the TD2, the connection lapses. It still looks like it's connected, on both units, but it's not. You have to turn the speaker off, close the music player app, then re-link both for it to work again. I'm sorry it's off-topic, just venting about the "crap side" of Bluetooth.
Click to expand...
Click to collapse
Thanks, i've tried every which way so far, but the problem remains, I found the only workaround is to remove any today or touchflo music tabs, at least that stops my TD2 steaming and drawing battery. Instead it opens windows media player, but i've purposely left that empty so at least nothing is being played (i.e. drawing power)
Bluetooth has come a long way, thats so funny you say that, I always wanted to be able to do this, but now my ipod is integrated into my car i don't.
Has anyone figured this out yet? Windows Media Player starts when connecting to the bluetooth factory fitted car kit when I don't want it to !
Is there a reg hack to stop Windows Media Player starting when the pairing takes place on the car's ignition?
Thanks!
T-back's 6.5 BT driver.cab
I had the same problem and I solved it installing T-back's 6.5 BT driver.cab
http://forum.xda-developers.com/showthread.php?t=545737&highlight=t-back+bt+driver
I am not sure whether T-back's 6.5 BT driver.cab has some drawbacks as claimed in the above thread, I am using pocketmusic on my Topaz wm6.5.1 italian paired with a parrot mk6000, still have some minor issues I can live with
Hi all,
I have a HTC Touch HD and I am using both Destinator and NDriver navigation programs.
Recently, I purchased a bluetooth headset (HTC BH M300) which supports A2DP.
Now, in top bar icons, I have another icon displayed, indicating the ability to stream music. I have a problem though…
All my device sounds (except of the incoming calls of course) are now streamed to the headset. When I use the navigation programs, the voice with directions come trhough the headset and not the speaker (like when I was using a non A2DP headset).
This is annoying because I don’t like having to wear the headset at all times while driving. I need to hear to the driving directions through the speaker and talk with the headset when in a call.
Is there a way to solve this?
Go to start/settings/connection/bluetooth and on your a2dp bluetooth headset uncheck set as wireless stereo , to remain only set as headset device
Hi guys!
So, the Xperia support A2DP just fine, also in combination with my car stereo (a Pioneer Avic D3BT set). However, I find that when I start playing audio (doesn't matter if this is music or satnav guidance) before I start the car (and hence the stereo set), not only will the audio not be re-routed to the stereo, but the phone also fails to connect with the A2DP part. Phone audio (headset profile) is connected OK, though.
Is this normal behaviour/has anyone seen the same behaviour?
Oh, and if anyone has a way of transferring contact to the phonebook of the car, I'd be delighted to hear about it. For me, it will immediately disconnect if I even attempt to transfer a phonebook item.
Hey Stampot. I have a Pioneer BROWSE system(BTB200) and I have the same problem. I find if I activate the phone bt after the car is on, A2DP connects fine. But if I do it the other way around,I only get phone audio. To fix I either have to disable/enable the phone bt or (the faster way) toggle the a2dp option. I'm hoping a de/firmware upgrades fixes the prob.
-------------------------------------
Sent via the XDA Tapatalk App
Its works better when u start the car first and that should not be a problem, shouldn't????
Its the same with every Bluetooth Headset. U can do it with the other way, but u must choose the Audioconnection in the Bluetoothsettings manually.
Everytime My Galaxy S5 (G900F) is connected to my inbuilt BT handsfree in my car (Skoda Octavia) music player is turned on automatically and it starts to play music. (I cannot hear music because car audio has selected Radio mode not BT audio)
Do you know how to disable it please?
It is not possible to disable it in settings of BT, Music Player, Car Mode, Sounds. I dont want to disable BT audio at all, because I sometimes use it.
Thanks
Michal
This maybe something to do with your car kit or settings? I don't have that problem when connecting to my factory fitted car kit.
Try the "places" setting in "location settings" and use the BT connection to tell the phone you are in the car.
Places were already done - Car via BT connection as you suggested. Not solved
Majkl_CZ said:
Places were already done - Car via BT connection as you suggested. Not solved
Click to expand...
Click to collapse
Sorry for my poor english, once connected go to bluetooth settings and select the option of your connected car (the gear symbol on the right) once there uncheck the multimedia option.
No problem, but I know about this option. As I wrote "I dont want to disable BT audio" because I sometimes use it There must be another way to disable it