I'm confused about network settings in my Exec (but I guess this question applies to all WM devices).
What's the functional difference between My Work Network and My ISP? When I'm browsing WiFi networks and a new one is discovered, the notification says:
"Wireless Node 2" network connects me to:
O The Internet (or work via a VPN)
O Work
What's the correct answer? Why do I have a choice? In some cases I'll want the WiFi network to allow me to only access the Internet and in other cases (like the WiFi networks in my house) I want to be able to access the Internet AND browse files on other PCs + use Terminal Services. Should these situations require different settings or are they essentially the same?
Second question: If I'm using a program that needs an internet connection, what settings must I choose to ensure that the system uses WiFi if it can, and then GPRS only if WiFi isn't available? I've changed the option in Settings > Connections > Connections > Advanced > Select Networks so that both drop-down boxes show 'My Work Network' (since I don't want to choose a default of My ISP - i.e. GPRS - for network activity if a WiFi connection is available) but now I can't seem to find any GPRS connection options. How do you all connect to GPRS manually? If I tap the signal status icon at the top of the screen I have no 'Connect GPRS' option like I did on my XDA2.
I'm confused by it all. Thanks in advance for any help you can provide, especially links to pages with how-to guides for idiots
PS. Tried searching these forums, but the subject is too generic and there are hundreds of results.
Hi
In my opinion WM2003SE's handling of connections is horrible. I understand you, being confused.
I'll decribe WM2003SE way...
Your exec has WM2005, but as far as I know, the rules are similar.
The general difference between "Internet" and "Work" is that connection set as "internet" allows you to surf web and give your program access to internet. While connections set as "work" should be used only when you connect to your home/office network (and optionally internet).
About disappearing "Connect GPRS". It's pain in the ass really
You can create as many "connection profiles" as you want (like "My ISP" "My Work Network" "My other freakin' ISP" "Etc")
Then you add some connections to certain profile....
eg.: create gprs connection (named "O2 GPRS inet" for internet in "my ISP" profile.
That means that when you change default Internet profile to "My other freakin' ISP", you won't be able to use "O2 GPRS inet"...
Ok.. answering your first, main question.
If you want to use inet, browse shared folders and use Terminal Services you should edit "My work network" properties and check "This network connects me to the Internet".
When at home. Select (in settings->connections->connections) "My work network" for both auto internet and auto private network.
When roaming around, you should change auto inet to "My ISP" which will have a configured GPRS connection inside.
Your phone will use Wifi first (before GPRS) when activated and available.
OMG.. my fingers hurt.
Have fun fighting with WM
Thanks for your reply, robal. It's a big help but I'm still not 100% sure of the situation.
robal said:
The general difference between "Internet" and "Work" is that connection set as "internet" allows you to surf web and give your program access to internet. While connections set as "work" should be used only when you connect to your home/office network (and optionally internet).
Click to expand...
Click to collapse
But I want both types to connect to the Internet. I still don't really see the difference. Does My Work Network apply to connections for which a VPN is necessary? If I choose 'The Internet' as the option when connecting to a new WiFi network, will that change any aspect of the way in which the connection works? Perhaps I should just try it and see. Trouble is, if I screw it up I'll never be able to get it working again!
robal said:
If you want to use inet, browse shared folders and use Terminal Services you should edit "My work network" properties and check "This network connects me to the Internet".
When at home. Select (in settings->connections->connections) "My work network" for both auto internet and auto private network.
When roaming around, you should change auto inet to "My ISP" which will have a configured GPRS connection inside.
Click to expand...
Click to collapse
Perhaps I'm expecting the impossible. I want to set it up and forget about it, so that wherever I am my device can access the Internet. If I'm connected to a WiFi network then that's the connection but if not then it dials up GPRS automatically when a program demands a connection.
Does everybody else use robal's method and change the settings depending on the availability of a friendly WiFi access point?
If this is the case then Windows Mobile has a long way to go before the connectivity is seamless...
I was largely having probs connecting to 02's 3G network as I couldn't find the settings.. now I kind of understand. Kind of.
--O2 Contract 3G settings--
Name of connection: O2 Internet
Select a modem: Cellular Line (GPRS, 3G)
Access Point Name: mobile.02.co.uk
Username: mobileweb
password: *** (it was prefilled for me..)
Advanced Button should be set to auto-assign IPs
--
With regards the original post, I have mine setup so that if I connect to my local WiFi, then I get the internet through that. If I disconnect, or not in range, etc, then it will use the 3G settings.
I'm still a little in the dark with regards WM5.0s handling of network connections, but here's what I think is right:
Start > Settings > Connections Tab > Connections
[Tasks Tab]
You can only have *2* active connections
You can have multiple profiles under each connection.
So, I renamed my O2 Internet connection to something other than "My ISP", I chose "O2 3G Network" to make things a tiny bit less confusing. (This is the network with your 3G settings in as above.)
The second option I renamed to "My Wireless Network", and as far as I can tell, you do not need to change anything in there - unless you want to add VPN information.
[Advanced Tab]
Click "Select Networks"
Here you can choose between your 2 active connections. For the top option I chose "O2 3G Network", the second option "My Wireless Network".
Click OK
--
Now you have two networks setup. Open Internet Explorer..
If you do not have WiFi switched on, it should automagically dial your "O2 3G Network" when you start browsing.
If you're at home, or near a WiFi network, switch it on by holding your stylus on the "U" in the taskbar. This should give you the option to switch on WiFi.
A few handshakes later (this took about 2-3 mins to actually connect to my WiFi) and your "U" should change to the WiFi antenna icon.
*Check you have fully connected to WiFi before browsing!*
Do this by again, holding the stylus on the antenna icon and checking that your WiFi name is displayed, along with the signal strength.
*If you try to browse the web before your WiFi is ready, it will just attempt to dial O2 3G Network!* - Patience is required...
So, whether this answers the original post or not, I mean, it isn't exactly Automatic, but I guess if you leave WiFi switched on, then in theory it will use it, else it will dial your 3G network.
Well, thats my brain dump for my own benefit, hope it helps out others.
That will be very helpful, thanks gaspx. I'll try your suggestions later on and let you know how I get on.
So with those settings when your Exec finds a new wireless network and invites you to set up your connection, which do you choose? "The Internet" or "Work"? I think :?: that those two options are independent of your renaming of "My ISP" to "O2 3G Network"...
I guess I can get it set up right like you have, but I hate not understanding this. It should be so simple but it's not!
"The Internet" or "Work"? I think that those two options are independent of your renaming of "My ISP" to "O2 3G Network"...
Click to expand...
Click to collapse
Yes, they are independant and are accessible when you choose Start > Settings > Connections Tab > Network Cards
Then select Network Adaptors tab.
What I'm not fully understanding is how these two options differ(!):
For instance, I have a static IP address on my WiFi, so I choose Network Adaptor Profile "Work", then configure "tiacxwin Compatible Wireless Ethernet" and enter in my static IP and DNS etc..
What I would *expect* to be able to do is choose between "Work" profile and have my static IP, or "The Internet" profile, and have dynamic IP.
But it doesn't appear to work that way.. if I add static IP address, it uses it for both Work and The Internet. Confused ? Me too.
which do you choose? "The Internet" or "Work"?
Click to expand...
Click to collapse
So from my initial playing around, it doesn't appear to make any difference! - Otherwise i'd expect to add a roaming WiFi Hotspot to "The Internet" (and dynamic IP) and any Work related (static IP) to "Work".
Must be missing something fundamental here, but O2 Exec manual (pg.92) isn't especially forthcoming with an answer.. :?
This might help you a bit.
I connect to work with a vpn connection over the internet. the address for the vpn is a url.
1. I set up a gprs connection under internet
2. I set up a vpn connection under work to vpndomain.com.au
3. in the advanced tab of connections I add *.vpndomain.com.au to the exceptions list for work connections
4. I start a terminal session to terminal.vpndomain.com.au
the device connects to internet then connects to work over internet.
if you don't need one connection to occur via another then make them all internet
hope that helps
Okay, a bit more braindumping to understand the differences between "Work" and "The Internet" courtesy of ActiveSync Help..
ActiveSync > File > Connection Settings
This computer is connected to: Auto/Work/The Internet
---
Use ActiveSync to "pass through" this computer. That means the connected device can use the computer's network connection as if it were its own. You can use this feature to perform tasks such as downloading non-Outlook e-mail messages, to connect directly with Exchange Server, or to browse the Internet.
---
So, from that, I set the connection type to "The Internet" in ActiveSync, and I was able to browse the internet on my XDA.
I then set the connection type to "Work Network" in ActiveSync and was *not* able to use the internet.
What does it all mean ?
Well, at the moment all I can think of is that if don't set it to "The Internet", you er, don't get Internet access. :roll:
Applying that to the original question of which do I choose:
"Wireless Node 2" network connects me to:
O The Internet (or work via a VPN)
O Work
Click to expand...
Click to collapse
I would holeheartedly recommend (if its a wireless network you've found whilst walking the streets) that you choose "The Internet" !!
--
Functional Differences
I'm thinking/believing/speculating that the functional difference between the two is that the "Work" option is for connecting to local or internal IP's only, for instance anything on your 10.x.x IP range if that is the subnet you're on.
The "Internet" option allows any *external* IP address to be accessed, and no access to the local IP range. This would then require the VPN option to be used to access local/intranet resources. (This is the passthrough option as mentioned above in the ActiveSync help)
I'm literally typing as i'm testing, and so far it kinda makes more sense to me now.. kinda.
Dear all,
I'a a newbee and i've been trying to connect to my home wireless network but I can't. I go to the "Configure wireless networks" and find a list of network adapter. I guest the one i need to config is "SDIO Wlan wireless adapter". I have played around with it, with or without IP address but it doens't work. I select "My work network" under "programs that automatically connect to the Internet should connect using" but it doesn't work. Could someone help me out please?
Cheers
try 64 bit encryption
I couldn't connect to my work or home networks with my Vario. it turned out 128 bit encryption was not playing. once I set the access key to 64 bit it connected no bother.
no encription option
Hi,
When I set up a new wireless network, i put name, then choose "connect to the internet" in the "general" tap. In the "network key" tab, i choose "open" under authentication and "disabled" in data-encryption field (the other choice is WEP) because i don't set any password for my home WIFI.
Could someone help me, please?
Normally the my device should pick up the signal automatically. in the "configure wireless networks" window i find a list of many networks in the "wireless" tab, including the one i set up, but none of them connects to my home wireless network.
HELP! HELP! HELP!
thanks
Hi there,
More wifi problems here! I have read all the relevant posts and can't find any help yet, so;
Basically I have an unlocked ex-T-mobile MDA Vario that I'm trying to connect to wifi.
I have tried to connect to my home wifi network and several other networks but can't actually make things work; my Vario sees the network and in my home case actually says connected, but when I open up Internet Explorer it opens up a box saying 'The page cannot be found. Check the name and try again.'
Under the Wireless LAN settings I'm not sure if I should be putting something in the fields for LEAP or ENROLL and I'm not sure what goes in there anywhere - under Enroll it asks for username and password and server - are these necessary and what are they?
Incidentally my Vario can log onto the wireless router because I can type in the IP address and alter settings - I just can't get past it to the actual internet.
Any help would be much appreciated - in basic terms please!
Thanks again.
In the settings page, got to the connections tab, then to "Network Cards" make sure that on the "Network Adapters" tab where it says "My network connects to" you have "The Internet".
Then again on the connections tab, select "Connections" go to "Advanced" click on "Select Networks", on the botton where it says "Programs that automatically connect to a private networks should connect using" pick a connection that doesn't have a modem set up or proxy settings.
I don't know if these are the exact rules, but that is how I have mines set up, let me know how it went.
Guys,
I'm not a complete noob but this one has me stumped. I have a WPA PSK encrypted wifi network at home that I wanted my Blackstone to connect to. I could get it to connect through to the net whether I used The Internet or Work connection. However, only when I use the "My Work Network" connection for both the "Programs automatically connecting to the internet" and the "Programs that automatically connect to a provate network" settings I can connect to my wifi, browse my files, and still use the net through my wifi's gateway (i.e. my home internet).
This didn't happen when I tried the "Internet" or "My ISP" settings on the connections, networks screen.
Now my issue is that everything works exactly how I want it except one thing. when I'm not at home and I need to access the net, it automatically uses the "contract internet" (GPRS/3G/HSDPA) connection which is great, however this connection only works for the internet and mail....MSN simply gives me an error message that the connection was not made. However when I switch the connections back to "My ISP" it works.
I've always found this connection setup a tad confusing, so if somebody could point me in the right direction i'd be appreciative!
Thanks
Wiggz
I have another thread in here with "what happened to "My work network"" since that doesn't seem to work as it should. This may be related: With the connections set to Work, I can't access network shares and get "can not connect" and the option to change conection settings. That's strange. But this is stranger: If I set the connections to my 3G network provider (Telenor) and try to open a path in File manager it first connects to 3G or Edge (no 3G at home...), and then it actually connects to the network share!
Can somebody please tell me why this is happening? I have tried setting both the Broadcom adapters to both The Internet and Work, but nothing helps.
I have everything set to "the internet", "work" is completely unused. Everything works perfectly.
Strange. I don't even have "The Internet" in my Connections. I have "My ISP" and the stuff my cell provider has put in. Should I add one connection called "The Internet", or what?
Settings -> wireless -> WLAN -> advanced -> network cards -> network cards tab
Make sure when you select the DHD network adapter the dropdown "My network card connects to" is set to "the internet".
Thanks, but like I said in the first post I have tried to set both that and the other Broadcom there to both Work and Internet, and none of them works.