Hi all
This is my first post, please be gentle. I have tried searching and read lots but have got now where very fast. Firstly thanks to everyone putting out all the guides and working on the updates and such. I have a HTC magic vodafone google UK
I tried rooting my phone using: http://android-dls.com/wiki/index.php?t ... ic_Rooting
then I loaded recovery RAv1.1.2 which worked well again
I think its at this step where I went wrong. I then tried to load up the fatality Scene onto my phone and now it does not boot. looking back i missed the fact it was for 32A and not 32B and when i try to restore nandroid the same problem of only vodafone splash screen comes up and hangs until battery is removed
I can access recovery by holding home and power, i can load roms from sd card but on reboot it hangs on vodafone. So I have to take the batery out. I can still access fast boot when putting battery back in and back and that has got me no where aswell
on fastboot it says
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
APR 9 2009, 23:30:40
All I wanted to do is to be able to access voice dialing, multi touch and saving apps on SD card, anything else is a bonous. Now any use apart from a paper weught would be good
any advice appreciated!!!
please help!!!
ok well if you can still acess fastboot then you shoulb be able to load recovery image by using
fastboot boot name-of-recovery-image.img
and then flash the phone again using a 32B rom... Make sure of course that you first download the rom and place it on the sdcard using a card reader or something!
I have learned the error of my ways. Basically I should have read more and try and understand what the actual process was doing rather than blindly following instructions. Im all up and running and have to say many thanks to every one working on this, there is actually more than enough info and support if you look for it!
Related
Hi all,
yesterday I got my HTC Magic but there was Hero ROM on it already. First thing that I have done is a master reset (hold HOME+BACK and power On, then press trackball), because I like to start fresh with new fone, don't want to have old user settings and customization.
Now phone doesn't boot. It boot to the HERO logo but that's all. After HERO animation, it start loop, HERO animation starts again until the battery is removed.
Please help. How to solve this problem, I'm OK with HERO ROM on the Magic or with the original ROM.
So what to do? Thank you in advance.
You just need to re-flash the ROM. So find a Hero ROM or some other ROM that fits the board (either 32A or 32B), and put the update.zip on your SDcard and go to recovery mode and flash it.
Cheesebaron said:
You just need to re-flash the ROM. So find a Hero ROM or some other ROM that fits the board (either 32A or 32B), and put the update.zip on your SDcard and go to recovery mode and flash it.
Click to expand...
Click to collapse
Cheesebaron,
thank you for you replay. Can you give me some more instructions, I have Android phone for less then 24 hours (read: he is n00b) and which is procedure for flashing? How to go to recovery and start flashing part? Part for the zip package is OK, I can do that via micro SD card reader.
edit: And please if someone can post link for Hero or default Magic ROM that will work OK, it doesn't matter for first time, goal is that phone start working at all.
OK, so far I have managed to install various ROMs to my 32B Magic.
So I have some new questions:
On which ROM all features are 100% working?
Which ROM is closest to default ROM?
This is my config:
sapphire pvt 32b ship s-on g
hboot 1.33.0004 (sapp10000)
cpld-10
radio-2.22.19.26I
apr 9 2009
Hi everybody,
Call me stupid if you like but....
I have a HTC Magic from Belgian telecomservice Proximus.
Some days ago I did the following.
- deleted all files from SD-card
- wrote down following:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2005 (SAPP 10000)
CPLD-12
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
- ran the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
- RUU said: cannot find customer-ID
On this point my mobile was stuck on the RUU / USB screen
- I ran RUU_Sapphire_HTC_Europe_3.04.401.2_HTC_AT_test_signed_NoDriver
- RUU said: cannot find customer-ID
now my mobile says:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
Now I think (I'm a noob) my mobile is semi-bricked.
I tried to make a Goldcard, but couldnt because I cannot run adb.
I can run fastboot from AndroidSDK/tools
adb doesnt find devices.. fastboot finds my device.
Anyone who can help me? I would be really thankfull.
Ouch ouch, looks like its more than semi bricked for now. Since it updated your spl to a perfected one there isn't hacked yet. I'm afraid that the only thing there might save this phone is running another RUU your mobile will accept. You have to find one which got 1.76.0009 or higher cause the S=ON now
If this wont work the only hope will be a spl hack will be released and will be done through fastboot.
But most of all it sounds like the best thing there could happen is that your warranty is still valid and they will replace it for you.
Anyway, don't take my words as 100% cause i'm no expert on this matter!!!
If you dare to try to flash another spl/radio through fastboot look at this: http://forum.xda-developers.com/showthread.php?t=605239
BUT, as your new spl is perfected it will most probably not work and ruin the possibility to use fastboot.
Maybe and just maybe, it will be easier to get a replacement if it's fully bricked and it's impossible to get into fastboot and recovery.
Thanks already for the fast answer.
Let me try your suggestions first.
Warranty will not be provided I assume.
I tried to reflash, I couldn't... Let's jst go to the shop and send it to repair-service.
Thanks for helping Ronni!!
radjagios said:
I tried to reflash, I couldn't... Let's jst go to the shop and send it to repair-service.
Thanks for helping Ronni!!
Click to expand...
Click to collapse
Try to wait a little while, like i wrote i'm not an expert on this matter.
Maybe if you're lucky someone will drop by with a solution for it. But to be honest, i wouldn't keep my hopes up
And sorry didn't follow the thread, don't have any links for RUU cause i'm not really sure which you should use.
But if Belgium got the update which include HTC sense, i guess that would be the right one.
I found a solution to my problem.
Here's what did I do.
hxxp://forum.xda-developers.com/showthread.php?t=656798
Got the exact same issue.
Tried the goldcard with the sandisk 2GB, but with an usb adapter. (I read the card should work)
I could do everything in the goldcard tutorial but when inserting the goldcard in the phone nothing happens at boot or when pressing the recovery keys at boot.
It jumps right away to versions screen.
The strange thing is though. Once I inserted the sd card in the phone, I can no longer use it on the PC (please insert media). Which I could do before.
When inserting the sdcard on another magic phone, it's working fine.
Going to get a Kingstong 2GB with sdcard adapter in the mean time and try it in the pc's card reader.
(HTC Magic 32A)
It really sucks Proximus sells android phones you cannot update. What's the use to have open source software then?
I also wander why the RUU update went wrong, once you root the phone is should work no ?
hmmm, I Read on this forum there is no fix for the 1.76.0009
h**p://forum.xda-developers.com/showthread.php?t=548218&page=27
radjagios, can you confirm the goldcard is working for this?
You have any useful info like sappimg version you have put on it?
I was looking for sense roms for my mytouch 3g 1.2 and found one that required the radio to be updated to 6.35 ( i double and triple checked to make sure the steps and procedures were specifically for the mytouch with the 32a board ) but after I followed the directions, my phone became unresponsive. It stayed at the HTC Magic screen for about an hour before I turned my phone off and back on again to undo what I had done ( using previous experience from a screw-up I did several months back...basically using the goldcard method to re-root my phone as if it were "new" again ). My problem is, now it's more unresponsive than it was before. it pauses at system - unzipping every time i try to use hboot to load the sappimg.zip. right now my current stats are:
SAPPHIRE UNKNOWN 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
May 8 2009,21:02:32
and loads up a red vodafone bootscreen. i honestly think my problem was accidentally pressing the wrong link on Amon_RA's thread about perfected SPL, and i didn't realize it until it was too late... I cannot flash anything thru fastboot, hboot basically stops at system - unzipping when trying to run the sappimg.zip, and "fastboot boot recovery.img" loads the red vodafone screen, but doesn't flash boot the recovery so i can try and fix it with recovery...
all i need to know is if it's entirely bricked, or if i can still save it, and if so, a little nudge in the right direction would be much appreciated...i have been searching google, xda-developers, cyanogenmod, androidforums, etc. for the past 3 days and cannot, for the life of me, find out how to fix the issue...
EDIT: as always, when i ask for help, i end up fixing it somehow...
Hi,
First of all, let me tell you what happened. I have had a standard htc magic with sense UI (perfected spl) so I done everything what was needed to upgrade my phone to other ROM. Everything was ok untill my girlfriend told me next day that she can't call me. I tried to call her, an it works but in other direction doesn't. So I decided to downgrade radio and engeniering SPL to flash other ROM and everytime I was trying to downgrade radio the phone screen turns dark. After a couple of times I came up with an idea to simply use patched RUU aplication to do it. This time it won't work either. Whats more the phone turned into s-on and it only boots into something like fastboot screen but there's nothing more like some informations about radio and stuff and RUU. And here is my question.
What can I do with my phone to bring him to life?
Is it posible to make a goldcard synthetically, I mean without pluging phone into USB to get some codes?
ps: Sorry about my english. I think my phone is more important at this time.
possible solution
Hello there,
yes, you can read the CID of an SD card from your pc too.
the CID is basically a serial number for your SD.
since S in SD stands for secure, some programmers can limit their applications to run only in the SD they were installed to by verifying the CID.
anyway, if you can access HBOOT mode (vol down + power), it would be a lot simpler flashing a basic RUU rom, then root it, install a recovery and do whatever you want.
If you choose to follow this method, I suggest you to restore a RUU with android 1.5 or 1.6, it's easier to root and you're sure everything will work. i heard 2.x version of android sotck roms for htc magic can have some problems in rooting process.
good luck to you!
I will try to get the CID of my SD card, but what's more complicated is that whatever way I want to turn my phone on it only boots with something like fastboot screen, but instead of options to choose on the screen i there's only RUU and when i plug-in the USB cable the sign changes into RUU USB. So accesing any other mode is imposible. Only the blue light mode works. :/
mikamikamika said:
I will try to get the CID of my SD card, but what's more complicated is that whatever way I want to turn my phone on it only boots with something like fastboot screen, but instead of options to choose on the screen i there's only RUU and when i plug-in the USB cable the sign changes into RUU USB. So accesing any other mode is imposible. Only the blue light mode works. :/
Click to expand...
Click to collapse
What carrier is your phone from and what is your current hboot info? You should be able to see it from the RUU fastboot-like screen.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
hboot info:
sapphire PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
The phone works in Orange PL
I would be very thankful if You, or anyone could help.
Download this, plug your phone into the computer and turn it on so that you have "RUU USB" on the screen, the double-click the downloaded file and run it. See if that gets you anywhere.
The same situation as later. Everything goes ok until the radio is being updated, then the screen fades black. The whole process ends at 36%.
Your going to have to see if mumilover adds his comments here.
Sent from my HTC Glacier using Tapatalk
Hi, Not sure if this helps, check out this thread as it is a good source and also there is an article on flashing without the sd card. http://forum.xda-developers.com/showthread.php?p=12210523#post12210523
mikamikamika said:
sapphire PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Click to expand...
Click to collapse
You got radio/spl combo mismatch.
Run this command and give us the result:
Code:
fastboot getvar version-main
Are you sure that the above info is correct and updated?
version-main is 3.05.401.1
I made a mistake, hboot is actually 1.76.0008.
Hi all, I bought a 2nd hand HTC Magic with Mytouch 3g rom. It's the old model (without 3.5mm headphone jack) and its made in Taiwan.
Been using well for 3 months until what happened I tried doing system update from 1.5 to 1.6. Success!! Then I tried doing 1.6 to 2.1 update.
Halfway while updating it, the phone blacked out ( guess I didnt have more than at least 50 % battery power)
And from that point onwards, whenever and everytime I switched on my handphone it boots up and stucked at the Mytouch 3G green screen.
I cant get access into my handphone like how I normally do. All I can ever go far is just the stucked Mytouch 3g screen.
I've read alot from lots and other Android users and tried to do it myself.
1) Tried unrooting it by downloading the sappimg.nbh file, copy into a newly bought 2GB micro SD, pressing (VOL DOWN+POWER) and let the phone do its job.
Manage to get to the parsing, updating and checking signature part but it just say 'Model ID incorrect! Update Fail!'
2) Next I read is about doing GOLDCARD METHOD. I did as instructions and follow it step-by-step and carefully.
3) I can and able to download all needed files like 1.33.2005 HBoot, Amon Ra's Recovery Image, SappiMG.zip and all others.
BUT the only problem is that I cant get it in sync with the comp.
4) I cant get access at all into my phone to go to Settings > Applcations > Make sure Unknown Sources is checked on as required to.
5) I cant get access into my phone at all to go to Market and download the required File Manager App.
6) I tried installing all kinds of files for update.zip by pressing (HOME+POWER) still to no avail.
Tried all kinds of HBOOT, FASTBOOT still cannot.
7) The only thing I'm able to do is just (VOL DOWN+POWER) , (BACK+POWER) , (HOME+POWER) , (TRACKBALL+POWER) which emits the blue LED light, i don't know the reason. But still, nothing can be done.
And by pressing (BACK+POWER) this is what my phone's motherboard or whatever they call it.
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)
CPLD-12
RADIO-2.22.28.25
Oct 21 2009,22:33:27
So what should I do now? Is this what they called it a bricked phone? I tried everything and really at lost. Is there someone out there who's able to help me with this? Been like this the past 4months. And Im really a noob with Android Gadgets as Im new to it. Do pardon my ignorance.
Thanks! really need your help. I'll do my best as long there's other alternative methods unless like I've stated the methods that I'm unable to do.