Hi there,
I am using a .cab file to configure my WIFI settings on Windows Mobile 6 standard and PRO. I used the guide at http://www.windowsmobiletraining.com/Connection/forums/t/441.aspx, I gained more information on Google but the .XML file is only working on the PRO version. I could use some advice,
XML code.
--------------------------------------------------------------------------
<wap-provisioningdoc>
<characteristic type="CM_WiFiEntries">
<characteristic type="My_SSID">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
</characteristic>
</characteristic>
<characteristic type="Wi-Fi">
<characteristic type="access-point">
<characteristic type="WIFI-HOME">
<parm name="DestId" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
<parm name="Encryption" value="4"/>
<parm name="Authentication" value="4"/>
<parm name="hidden" value="1"/>
<parm name="KeyProvided" value="0"/>
<parm name="NetworkKey" value="MyPassword"/>
<parm name="KeyIndex" value="1"/>
<parm name="Use8021x" value="0"/>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Comm\TIACXWLN1\Parms\TCPIP">
<parm name="EnableDHCP" value="0" datatype="integer"/>
<parm name="AutoCfg" value="1" datatype="integer"/>
<parm name="WINS" value="" datatype="multiplestring"/>
<parm name="DNS" value="Your one" datatype="multiplestring"/>
<parm name="DefaultGateway" value="Your one" datatype="multiplestring"/>
<parm name="Subnetmask" value="Your one" datatype="multiplestring"/>
<parm name="IpAddress" value="Your one" datatype="multiplestring"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Related
Hi All,
I tried OTA(using OMA Specification) to XDA IIs phone. I received settngs and the phone displays settings updated successfully. But if i go to connections page .,i didn't see any settings.,but if i do autoconfig.,then NAP,Proxy settings are coming.,but NAP full details are coming and Proxy Information is not coming.
Please find the profile i used for OTA below:
<wap-provisioningdoc>
<characteristic type="BOOTSTRAP">
<parm name="NAME" value="GDWAP"/>
</characteristic>
<characteristic type="PXLOGICAL">
<parm name="PROXY-ID" value="proxy"/>
<parm name="NAME" value="GWAP"/>
<parm name="STARTPAGE" value="http://www.google.com"/>
<characteristic type="PXPHYSICAL">
<parm name="PHYSICAL-PROXY-ID" value="PROXY 3"/>
<parm name="DOMAIN" value="www.google.com"/>
<parm name="PXADDR" value="192.24.97.4"/>
<parm name="PXADDRTYPE" value="IPV4"/>
<parm name="TO-NAPID" value="NAP-INFO"/>
<characteristic type="PORT">
<parm name="PORTNBR" value="9203"/>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="NAPDEF">
<parm name="NAPID" value="NAP-INFO"/>
<parm name="BEARER" value="GSM-GPRS"/>
<parm name="NAME" value="dhimobile"/>
<parm name="NAP-ADDRESS" value="wap.mobile"/>
<parm name="NAP-ADDRTYPE" value="APN"/>
<characteristic type="NAPAUTHINFO">
<parm name="AUTHTYPE" value="PAP"/>
<parm name="AUTHNAME" value="wap"/>
<parm name="AUTHSECRET" value="wap123"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Please let me know if any problem in the profile.
Regards,
Pavan
Hello all!
I have a WWE Qtek 9100 and i live in Greece. Every time i do a hard reset i have to type in 9100 all mms and gprs settings. This is very boring and gets a lot of time.
My question is, if there is any way to save these settings into .cab so after the hard reset the only thing we have to do is to run the file?
Thanks in advance for your time,
Bill
bill_viper said:
Hello all!
I have a WWE Qtek 9100 and i live in Greece. Every time i do a hard reset i have to type in 9100 all mms and gprs settings. This is very boring and gets a lot of time.
My question is, if there is any way to save these settings into .cab so after the hard reset the only thing we have to do is to run the file?
Thanks in advance for your time,
Bill
Click to expand...
Click to collapse
yes there is, look on the ftp for UK gprs settings CAB. Inside there is a XML file called _setup.xml that contains those, you can port that to your needs. I also am super irritated to have to enter that again and again every time, started porting it for my operator but no time to complete it yet.. someday
basically it looks like this fot T mobile UK, with your highly evolved brain and expert pc skills you can port it ;-)
Code:
<wap-provisioningdoc>
<characteristic type="Install">
<parm name="InstallPhase" value="install" />
<parm name="AppName" value="T-Mobile UK Settings" />
<parm name="NumDirs" value="0" />
<parm name="NumFiles" value="0" />
<parm name="NumRegKeys" value="0" />
<parm name="NumRegVals" value="0" />
<parm name="NumShortcuts" value="0" />
</characteristic>
<characteristic type="FileOperation" />
<characteristic type="Registry" />
<characteristic type="Registry">
<characteristic type="HKLM\Software\Microsoft\Splash Screen">
<parm name="CarrierBitmap" value="\Storage\Application Data\Home\abcde.bmp" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="2" value="55393" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1">
<parm name="TotalSettings" value="2" datatype="integer" />
<parm name="DefaultSetting" value="2" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI">
<parm name="ConnectionVia" value="Secure WAP Network" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\mm1\55393">
<parm name="SendDefault" value="102400" datatype="integer" />
<parm name="RecvDefault" value="102400" datatype="integer" />
<parm name="MmscURI" value="http://mmsc.t-mobile.co.uk:8002" datatype="string" />
<parm name="Gateway" value="149.254.211.10" datatype="string" />
<parm name="Name" value="T-Mobile MMSC" datatype="string" />
<parm name="GatewayPort" value="9201" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Security\ECall">
<parm name="List" value="911*999*112*000*111*" datatype="string" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\nls">
<parm name="DefaultLCID" value="2057" datatype="integer" />
<parm name="SystemLCID" value="1033" datatype="integer" />
</characteristic>
</characteristic>
<characteristic type="clock">
<parm name="TimeZone" value="85" />
</characteristic>
<characteristic type="BrowserFavorite">
<characteristic type="T-Mobile WAP">
<parm name="URL" value="http://wap.t-mobile.co.uk/" />
</characteristic>
<characteristic type="t-zone">
<parm name="URL" value="http://www.t-zones.co.uk" />
</characteristic>
<characteristic type="Club i-mate">
<parm name="URL" value="http://www.clubimate.com" />
</characteristic>
<characteristic type="Carrier Devices">
<parm name="URL" value="http://www.carrierdevices.com" />
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile MMS">
<parm name="DestId" value="{F28D1F74-72BE-4394-A4A7-4E296219390C}" />
<parm name="UserName" value="user" />
<parm name="Password" value="one2one" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile Internet">
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="UserName" value="user" />
<parm name="Password" value="one2one" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_GPRSEntries">
<characteristic type="T-Mobile WAP">
<parm name="DestId" value="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" />
<parm name="UserName" value="user" />
<parm name="Password" value="wap" />
<characteristic type="DevSpecificCellular">
<parm name="GPRSInfoAccessPointName" value="general.t-mobile.uk" />
</characteristic>
</characteristic>
</characteristic>
<characteristic type="CM_PPPEntries">
<characteristic type="T-Moible WAP CSD">
<parm name="DestId" value="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" />
<parm name="Phone" value="+447953968999" />
<parm name="UserName" value="user" />
<parm name="Password" value="wap" />
</characteristic>
</characteristic>
<characteristic type="CM_ProxyEntries">
<characteristic type="T-Mobile Proxy">
<parm name="SrcId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="DestId" value="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" />
<parm name="Proxy" value="149.254.1.10:9201" />
<parm name="Type" value="2" />
</characteristic>
</characteristic>
<characteristic type="CM_Planner">
<characteristic type="PreferredConnections">
<parm name="{7022E968-5A97-4051-BC1C-C578E2FBA5D9}" value="T-Mobile WAP" />
<parm name="{F28D1F74-72BE-4394-A4A7-4E296219390C}" value="T-Mobile MMS" />
<parm name="{436EF144-B4FB-4863-A041-8F905A62C572}" value="T-Mobile Internet" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I dont get it
how can I find this file? and how to comile it to a CAB file?
Hi, after looking for long time on this forum and on google, I'm stuck
I'm looking a way, with tools MAKECAB, to create an autoinstall file with registry tweak.
The goal is to purpose an addons for TF3D Config, and auto apply all tweaks during installation process.
So
I already have this :
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKLM\System\GDI\GLYPHCACHE">
<parm name="limit" value="131072" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\SIM_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\NAND_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\Timeouts">
<parm name="ACResumingSuspendTimeout" value="90" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\Timeouts">
<parm name="BattResumingSuspendTimeout" value="90" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P6">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P8">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P9">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\Phone">
<parm name="Vol" value="34952" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\BackLight">
<parm name="AutoDeviceLockEnable" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\BackLight">
<parm name="AutoDeviceLockTimeout" value="5" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I just want to copy a file name tweaks_custom.xml to TF3D Install directory
Here my try :
Code:
<wap-provisioningdoc>
<characteristic type="Install">
<parm name="InstallPhase" value="install" />
<parm name="OSVersionMin" value="4.0" />
<parm name="OSVersionMax" value="6.99" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="AppName" value="Celogeek TF3D Custom Tweaks" />
<parm name="InstallDir" value="%CE1%\Diamond TF3D Config" translation="install" />
<parm name="NumDirs" value="1" />
<parm name="NumFiles" value="1" />
<parm name="NumRegKeys" value="0" />
<parm name="NumRegVals" value="14" />
<parm name="NumShortcuts" value="0" />
</characteristic>
<characteristic type="FileOperation">
<characteristic type="%CE1%\Diamond TF3D Config" translation="install">
<characteristic type="MakeDir" />
<characteristic type="tweaks_custom.xml" translation="install">
<characteristic type="Extract">
<parm name="Source" value="ctweaks.001" />
</characteristic>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\System\GDI\GLYPHCACHE">
<parm name="limit" value="131072" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\SIM_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\NAND_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\Timeouts">
<parm name="ACResumingSuspendTimeout" value="90" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\Timeouts">
<parm name="BattResumingSuspendTimeout" value="90" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P6">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P8">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\Camera\P9">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\Phone">
<parm name="Vol" value="34952" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\BackLight">
<parm name="AutoDeviceLockEnable" value="0" datatype="integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\BackLight">
<parm name="AutoDeviceLockTimeout" value="5" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
How can I pack it to a cab, and make it work ?
rename it _setup.xml
use makecab.exe like this from command line:
makecab.exe _setup.xml cabfilename.cab
your second xml doesn't look wellformed to me, it should begin like the first one with <wap-provisioningdoc> among other things.
geistteufel said:
How can I pack it to a cab, and make it work ?
Click to expand...
Click to collapse
Take a look in this thread...
http://forum.xda-developers.com/showthread.php?t=409306
ok thanks
its for registry tweak only
I know how to do that
I was looking for a free and easy way (no installing visual studio or big soft), to make installer with local file in cab and registry tweaks
for registry I have found makecab, work fine, under windows.
for copie file with local resource (in the cab), I have found pocketpc-cab (on linux)
I'm not really happy to go and back, and make 2 soft ...
WinCE Cab was my better solution, but it's not free.
how can I make it for free ?
Hi.
Just found this Hotfix on our HTC page here in GER.
The file is called "_HTC HD2_LEO08878.exe" and has 471KB.
Setup.xml sais that it does the following:
- <wap-provisioningdoc>
- <characteristic type="Install">
<parm name="InstallPhase" value="install" />
<parm name="OSVersionMin" value="4.0" />
<parm name="OSVersionMax" value="6.99" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="AppName" value="HotFix LEO08878" />
<parm name="NoUninstall" value="1" />
<parm name="InstallDir" value="%CE1%\LEO08878" translation="install" />
<parm name="NumDirs" value="2" />
<parm name="NumFiles" value="16" />
<parm name="NumRegKeys" value="1" />
<parm name="NumRegVals" value="1" />
<parm name="NumShortcuts" value="0" />
</characteristic>
- <characteristic type="FileOperation">
- <characteristic type="%CE2%" translation="install">
<characteristic type="MakeDir" />
- <characteristic type="AE_Add_New_Contact.png" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="AE_ADD~1.001" />
</characteristic>
</characteristic>
- <characteristic type="AE_inputfield_105.png" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="AE_INP~1.002" />
</characteristic>
</characteristic>
- <characteristic type="L_AE_Btn_Description_Input.png" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="L_AE_B~1.003" />
</characteristic>
</characteristic>
- <characteristic type="AttendeeDialog.xml" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="ATTEND~1.004" />
</characteristic>
</characteristic>
- <characteristic type="AE_inputfield_170.png" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="AE_INP~2.005" />
</characteristic>
</characteristic>
- <characteristic type="AfeXmlViewAttendeeListView.xml" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="AFEXML~2.006" />
</characteristic>
</characteristic>
- <characteristic type="HTCAppointment.exe.0407.mui" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="HTCAPP~1.007" />
</characteristic>
</characteristic>
- <characteristic type="AppointmentMsgBoxA.xml" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="APPOIN~1.008" />
</characteristic>
</characteristic>
- <characteristic type="L_AE_Dotted_Line.png" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="L_AE_D~1.009" />
</characteristic>
</characteristic>
- <characteristic type="AfeXmlProposeNewTimeDlg.xml" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="AFEXML~1.010" />
</characteristic>
</characteristic>
- <characteristic type="AE_Dotted_Line.png" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="AE_DOT~1.011" />
</characteristic>
</characteristic>
- <characteristic type="AE_Btn_Item_Selection.png" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="AE_BTN~1.012" />
</characteristic>
</characteristic>
- <characteristic type="HTCAppointment.exe" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="HTCAPP~1.013" />
</characteristic>
</characteristic>
- <characteristic type="L_AE_Btn_Item_Selection.png" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="L_AE_B~2.014" />
</characteristic>
</characteristic>
- <characteristic type="ViewAppointment.xml" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="VIEWAP~1.015" />
</characteristic>
</characteristic>
- <characteristic type="NewAppointment.xml" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="NEWAPP~1.016" />
</characteristic>
</characteristic>
</characteristic>
</characteristic>
- <characteristic type="Registry">
- <characteristic type="HKLM\Drivers\BuiltIn\HotFix">
<parm name="AppointmentEditor_version" value="20100702-00" datatype="string" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
Click to expand...
Click to collapse
HTC sais it does the following:
This update for HTC HD2 (O2) improves the handling of annually repeated calendar events.
Click to expand...
Click to collapse
I have never experienced any issues with annual appointments.
Has anybody recognized some improvements brought by this (small) Hotfix?
Cheers.
Has nobody tried it? For me installation doesn't work, because I'm not on stock.
Topic says it all. I have WPA2 AES on my network, and I can't find any way to make a provxml that makes that. Does anybody know of such a tool?
Here you have:
Code:
<characteristic type="CM_WiFiEntries">
<characteristic type="mywireless">
<parm name="DestID" value="{436EF144-B4FB-4863-A041-8F905A62C572}" datatype="string"/>
</characteristic>
</characteristic>
<characteristic type="Wi-Fi">
<characteristic type="access-point">
<characteristic type="mywireless">
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" datatype="string"/>
<parm name="Encryption" value="6" datatype="integer"/>
<parm name="Authentication" value="7" datatype="integer"/>
<parm name="Hidden" value="1" datatype="boolean"/>
<parm name="AdHoc" value="0" datatype="integer"/>
<parm name="KeyProvided" value="0" datatype="integer"/>
<parm name="NetworkKey" value="xxxxxxxxxxxxxx"/>
<parm name="KeyIndex" value="1" datatype="integer"/>
<parm name="Use8021x" value="0" datatype="boolean"/>
<parm name="EAPType" value="13" datatype="integer"/>
<parm name="KeyProvided" value="0" datatype="integer"/>
<parm name="KeyIndex" value="1" datatype="integer"/>
</characteristic>
</characteristic>
</characteristic>
Adjust your wifi name, password if it is hidden...
Thanks! That was almost, but it gave me an error a page long, starting with :
Code:
System.XmlException: There are multiple root elements. Line 6, position 2.
And a bunch of "throw" and "parse". But using your values for encryption and authentication I was able to build one that worked, so now I'm all good! This is what it became:
Code:
<wap-provisioningdoc><characteristic type="CM_WiFiEntries">
<characteristic type="MyWifi">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
</characteristic>
</characteristic>
<characteristic type="Wi-Fi">
<characteristic type="access-point">
<characteristic type="MyWifi">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
<parm name="Hidden" value="0" />
<parm name="Encryption" value="6" />
<parm name="Authentication" value="7" />
<parm name="KeyIndex" value="1" />
<parm name="NetworkKey" value="**********" />
<parm name="KeyProvided" value="0" />
<parm name="Use8021x" value="0" />
<parm name="EAPType" value="0" />
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
And in case you wonder: No, my WiFi password is not **********...
Mastiff said:
Thanks! That was almost, but it gave me an error a page long, starting with :
Code:
System.XmlException: There are multiple root elements. Line 6, position 2.
And a bunch of "throw" and "parse". But using your values for encryption and authentication I was able to build one that worked, so now I'm all good! This is what it became:
Code:
<wap-provisioningdoc><characteristic type="CM_WiFiEntries">
<characteristic type="MyWifi">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
</characteristic>
</characteristic>
<characteristic type="Wi-Fi">
<characteristic type="access-point">
<characteristic type="MyWifi">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
<parm name="Hidden" value="0" />
<parm name="Encryption" value="6" />
<parm name="Authentication" value="7" />
<parm name="KeyIndex" value="1" />
<parm name="NetworkKey" value="**********" />
<parm name="KeyProvided" value="0" />
<parm name="Use8021x" value="0" />
<parm name="EAPType" value="0" />
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
And in case you wonder: No, my WiFi password is not **********...
Click to expand...
Click to collapse
Yeah, sorry it wasn't a full xml, it was a fragment of my provision xml. (It configure UMTS, operator, Wifi, bluetooth...)
Glad you figured out
I'm glad to!
Hello,
When I found this tread I was very happy. I tried your xml file but without result. I can connect to the wireless router from my PC but cannot from my HD2. Here are the steps that I done:
1. Create a _setup.xml file with exact your data, except network name and password
2. I created a .cab with "makecab _setup.xml config.cab" and instaled on my HD2
I always get incorrect password.
This is the content of my _setup.xml file.
<wap-provisioningdoc><characteristic type="CM_WiFiEntries">
<characteristic type="[email protected]">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
</characteristic>
</characteristic>
<characteristic type="Wi-Fi">
<characteristic type="access-point">
<characteristic type="[email protected]">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
<parm name="Hidden" value="0" />
<parm name="Encryption" value="6" />
<parm name="Authentication" value="7" />
<parm name="KeyIndex" value="1" />
<parm name="NetworkKey" value="~1qaz2345" />
<parm name="KeyProvided" value="0" />
<parm name="Use8021x" value="0" />
<parm name="EAPType" value="0" />
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
The encryption of the router is WPA2-PSK with AES.
Any ideas? Can be the sing ~ from the password the source of my problem?
I cannot change the router password if you think about this.
Thank you.
I had similar problems connecting myself the first time, but that turned out to be that you have to turn on wifi N manually, at least with the ROM I have. Any chance that's your problem too? If not I can't think of any other possibilites than the ~ in your password, and you're probably SOL if you can't get that changed. Sorry.
starbucks2010 said:
Hello,
When I found this tread I was very happy. I tried your xml file but without result. I can connect to the wireless router from my PC but cannot from my HD2. Here are the steps that I done:
1. Create a _setup.xml file with exact your data, except network name and password
2. I created a .cab with "makecab _setup.xml config.cab" and instaled on my HD2
I always get incorrect password.
This is the content of my _setup.xml file.
<wap-provisioningdoc><characteristic type="CM_WiFiEntries">
<characteristic type="[email protected]">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
</characteristic>
</characteristic>
<characteristic type="Wi-Fi">
<characteristic type="access-point">
<characteristic type="[email protected]">
<parm name="DestID" value="{A1182988-0D73-439e-87AD-2A5B369F808B}"/>
<parm name="Hidden" value="0" />
<parm name="Encryption" value="6" />
<parm name="Authentication" value="7" />
<parm name="KeyIndex" value="1" />
<parm name="NetworkKey" value="~1qaz2345" />
<parm name="KeyProvided" value="0" />
<parm name="Use8021x" value="0" />
<parm name="EAPType" value="0" />
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
The encryption of the router is WPA2-PSK with AES.
Any ideas? Can be the sing ~ from the password the source of my problem?
I cannot change the router password if you think about this.
Thank you.
Click to expand...
Click to collapse
Take care of the encoding of the file... And obvisuly, of the xml header
Asking a novice question:
I see this is something to have advance security in WiFi.
But still can you please explain what is this all about and where this file should go during cooking?
I use Linksys E2000 WiFi router with a "2.4 GHz" settings and when I set that to "5 GHz" I cant access internet from Mobile (Topaz), but both way PC can have internet without issue.
May be I should do some basic homework here
Thanks.