[help me]i want to change the case - Wing, P4350 General

how can i change the case?
if i buy the case in ebay, how can i change the case?
help me please!

It's not hard just take off all the screws on the back, then slide it a bit in, you'll notice some screws there, take those off as well.
I believe you can search up on youtube a video showing how to take it apart

Related

Removing front cover / LCD?

Hey guys I was searching up on the forums about replacing the covers on the Jam after I dropped mine the other day, and after seeing the post by adolfotregosa:
http://forum.xda-developers.com/vie...ays=0&postorder=asc&highlight=housing&start=0
I decided im just going to spray paint the case black.
I found the PDF file about removing the back and side casings to fix a speaker issue, but I havent come across anything that explains how to remove the front cover, and the lcd from the front cover.
Can anyone shed some light on how to do this?
PDF file speaker issue
Can you please give me the link to the
"PDF file about removing the back and side casings to fix a speaker issue".
Cheers mate....
http://forum.xda-developers.com/viewtopic.php?t=18384&highlight=disassemble
After removing the flat cable as in page 15/16, right under the flat cable there's some clip you need to push towards outside. It suppose to come off completely. When that's off you can pop the screen. I needed to use some force but not as much to break it
just remember, AT YOUR OWN RISK!

making a guide: removing lcd

i've read many topic about...
in order to avoid to unclip lcd conncetor, some one advice to unclip pad plug.
is that square red circled on the right??
should i to raise it?
stratoboom said:
i've read many topic about...
in order to avoid to unclip lcd conncetor, some one advice to unclip pad plug.
is that square red circled on the right??
should i to raise it?
Click to expand...
Click to collapse
Ummm, I believe he's referring to the long flexible cable on the left side, indicated with the green arrows.
yup! I found it easier to disconnect the red marked connector, than puzzling on the green one.
Do you also have the audio problem???
i'm trying replacing front cover.....
can u explain me how to unclip that connector?
have i to raise it? or pull to the right?
help help :roll:
dood im trying ot figure something out similar to this. i followed that guide to replace my housing, which i think is what ur trying to do. u do have to move the black lock on the left side, lower part, and remove the ribbon connector. i did that, well i pulled the black lock OFF, it says in the tutorial to like flip it up, but i didnt see how that was possible. anyways after i took it off, i cant put teh damn thing back on? its like i have to slide it into all those mini gold pins. i think when i was trying to put the ribbon connector back in i bent a few, so when when i try to turn my fone on, i get a buncha random colors.AHH someone help??
i ve changed and replaced all
so, when u have to remove lcd, is better remove pad connector, the red circled one
don't touch lcd connector!!!
then to remove lcd we have to force a clip on the right.
on the left there is a removable clip, that fixs lcd to cover...
u can try to remove this one first, raising it
but be carefull....!!!
stratoboom said:
i ve changed and replaced all
so, when u have to remove lcd, is better remove pad connector, the red circled one
don't touch lcd connector!!!
then to remove lcd we have to force a clip on the right.
on the left there is a removable clip, that fixs lcd to cover...
u can try to remove this one first, raising it
but be carefull....!!!
Click to expand...
Click to collapse
I will have to try this! But where do I get hold of a new cover (the old one is broken) ???
ebay.....

dropped tytn

i dropped my tytn the otherday now the slide out keyboard wont work,or lite up, does this mean some things come off in side and i need to dissmantle it?,
Be an idea to check... Do a search for the HTC Hermes service guide and you will find out what you need to do to take apart. You should only need to remove the back cover to see if the connector has come out. Should be on the left hand side about 1/3 of the way up from the bottom next to the bottom protective plate on the Main board. Push connector in(sorry, don't have photo's). If it clips back in the that was the problem, if it still won't work then other problem.
Be careful of the battery catch and camera switch when replacing the back cover...

How to take off the back antena cover ?

Hi,
I would like to download the back cover of the antenna in my touch hd, but I do not know where it needs to be undermine.
I tried to see it on this film, http://vimeo.com/6892707 but with this quality is hard to see ;/
Service Guide also very not much to say on this subject .. Maybe someone has the opportunity to take good pictures and would be good enough to move them here? I would be grateful..thx
you know how you slide the battery/sim/sd cover off right?
well if u look at the lowest area after you take that off, you'll notice a thin gap, the service manual instructs you to use your 'plastic stick' and wedge it between that gap and twist the stick sideways, the glossy antenna cover is clipped on in four places.
The first two places are the only two you could accidentally 'snap', but if you follow the methodology i post here and take your time.
You should be fine (the clips at the front of the antenna case are tiny and are shaped in a way that they cannot break regardless of how you take it apart.

Dissasembly- Inner cover latches

Right, please forgive me for asking stupid questions, but I'd rather ask one first than break it
I'm trying to dissasemble my Galaxy S (Dropped it and now the vibrate is far weaker & the camera lens cracked). I've removed all 7 screws easily enough holding inner cover on easily enough, but I'm having problems with the latches, and don't want to start applying force. How should these actually operate- The dissasembly vids show a fingernail/ plecky, but don't describe whether to push straight in, up/ down etc.
Cheers
they are just clicked in. if you get something thin, like you said, a fingernail or a plecky, just slide it across and it will un click and pull off. use a little force, not too much to crack it tho

Categories

Resources