anyone came across this problem :S end button jammed - Touch HD General

the screen is not responsive to any touch except the end button and the lower right corner.. i have never dropped it and have always been taking care of it but prior to the problem i remember am having it in my pocket and there was some mild pressure over it and now this.. tried hard resetting tried rom change tried to manually giggle with the thing but nothing worked only thing i can come up with on the screen is the end button screen but then i can not chose anything

inspireme87 said:
the screen is not responsive to any touch except the end button and the lower right corner.. i have never dropped it and have always been taking care of it but prior to the problem i remember am having it in my pocket and there was some mild pressure over it and now this.. tried hard resetting tried rom change tried to manually giggle with the thing but nothing worked only thing i can come up with on the screen is the end button screen but then i can not chose anything
Click to expand...
Click to collapse
Hi inspireme, suggest you use SOTI Pocket Controller Pro to get your device up on your PC screen (download trial version at http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro). Then check whether the onscreen remote on your PC responds to mouse clicks. This will tell you whether you have a hardware or software problem. If it's hardware you need a new touchscreen. If its software, a ROM reinstall should solve it.

Related

End key button - press hard to register

Recently the end key button on my Titan has become a button that I need to press with a good amount of force on the very left or right side of it to have it work. I have ruled out a ROM problem (was using a prior DCD rom, now using 3.2.6) and I have never dropped my phone or had any extreme pressure/vibrations.
Has anyone else has this happen? The button still sounds like it clicks like all of the other buttons. Are there instructions out there for taking apart the Titan, or at least the front of it?
suprax said:
Recently the end key button on my Titan has become a button that I need to press with a good amount of force on the very left or right side of it to have it work. I have ruled out a ROM problem (was using a prior DCD rom, now using 3.2.6) and I have never dropped my phone or had any extreme pressure/vibrations.
Has anyone else has this happen? The button still sounds like it clicks like all of the other buttons. Are there instructions out there for taking apart the Titan, or at least the front of it?
Click to expand...
Click to collapse
how do you carry your phone? My VZW case would press my down arrow in and that caused alot of issues with the arrow. might be your case just wearing it out. remember, you dont have to drop it to wear out the metal contact underneath the button.
blksprk said:
how do you carry your phone? My VZW case would press my down arrow in and that caused alot of issues with the arrow. might be your case just wearing it out. remember, you dont have to drop it to wear out the metal contact underneath the button.
Click to expand...
Click to collapse
I carry is in my right side pocket in my pants, without anything else in there (keys, etc). I've had it since January of this year and babied it pretty well so I'm just surprised that with normal usage the button would become that hard to press.
I guess my options are taking it apart to look or bringing it to Verizon.
i posted a similar thread about the End key not to long ago... I had to press it extra hard to get it to register, then it just finally stopped working... i then had to use the touch screen end button... I got tired of it, so i took it back to sprint and they replaced my Mogul for free (as of 10/27/08). i also had issue with my keyboard, which keep repeating certain letters and having to type very hard to make them work. I searched and found a zip-file program that fixed that issue... but if you cant find a solution to the End Key problem, take it back to the store and let them handle it.
The Titan keyfix cab has fixed many of our problems with the keyboard and hard keys. Worth a shot I guess...
was your phone insured to be replaced?

Incorrect response from touch screen

Hi there!
I have absolutely ridiculous problem with my THD. All of a sudden screen started to act like it is half disabled. In simple words, if a touch some icon on top bar, let's say Start button, click appears on clock. Basically it is looks like touch area displaced by half an inch down. I've tried to calibrate screeen and it seems like it worked for a few minutes and then turns back. I had to hard reset the whole thing and it did not help either. All images, icons, screen items appeared correctly on screen. Bottom menu bar responses correctly though.
I did not drop the phone if it will give a clue.
Anyone knows what the hell is that and how to fix that problem? Please help.
Thank you.
Anyone? Please...
sounds like you need to re align your touch screen. you need to go to Start>Settings>System>Screen then align screen
If you cant get to this then a Hard Reset might be the only way to go
Nothing is working. Now I cannot even get past screen alignment. Looks like it can be a hardware problem.
u may have to hard reset
then after that if it still wont work then u may need a replacement
Yeah. It sound like it is. Jast called HTC support, did hard reset again and after few minutes it is back to that misalignment. Damn...
Connected to ActiveSync and have you got 'My Mobiler' running? I noticed some strange screen behaviour with that on the Device and the host PC.
try pressing both volume keys and tapping the screen at the same time(volup + voldown + tap the screen) --- it will get you to align screen mode if that doesnt work then maybe you have some problems while flashing a rom or something!
TPEHEP said:
Yeah. It sound like it is. Jast called HTC support, did hard reset again and after few minutes it is back to that misalignment. Damn...
Click to expand...
Click to collapse
I am having the same problem, it started suddenly somedays ago. I realized that when I hard rest it works fine for some time and then slowly left side of the screen stops responding, after a while only right side react to touch so you cannot access START menu nor anything else from the whole screen, just the left corners.Any solution?

Centre Windows Button Not Working - Just Me?

Any one else had issues with the centre windows button not working?
I'm not sure if it's hardware as in the button is actually not working or more of a software freeze. An example would be on the home screen pressing the windows button and literally nothing happens. touching start in the top left however works everytime.
A simple power on/off of the device solves the issue but its been happening a few times this week and is becoming annoying.
The more apps and tweaks I do to my phone, the more unstable it seems to get. Has anyone else noticed this? Just little things, like for example a few times my lock screen with "password" has reverted to windows classic style but then a screen off / screen on will bring it back again to the WM6.5 lock screen with slider.
Just overall slightly odd behaviour.
I may have recently installed something that the device doesn't like too much, but if so I am unsure what software it is. I'm tempted to save all patches I have, and write down the adjustments I've done and perform a hard reset, the phone definitely was not like this when I got it only 2 weeks ago.
I wonder if anyone else has had anything similar or if its just my phone?
Seems like a hard reset is required. My o/s seems very stable, the only problem I have in that regard is the odd freezing of the messaging app.
It just happened to me after reading this post :-O
another hardware failure case...good job HTC...
dgtel2 said:
another hardware failure case...good job HTC...
Click to expand...
Click to collapse
Elmo-85 said:
A simple power on/off of the device solves the issue
Click to expand...
Click to collapse
@dgtel2
Could you please explain how this "hardware failure" is temporarily fixed by a reset?
Another "reading failure", and simply blame HTC. Good job dgtel2.
When we reset, we need to hold the "call-off" button. That's not a good design due to excessive pressure to the edge of the "capacitive" screen. They should have introduced separate turn-off button. Over time, the buttons/screen will get affected (but for new unit, it's pretty unlikely...).
So, to reset using the red reset button, it is located underneath the "so-hard-to-open" back cover. Over time, again, will affect the capacitive screen.
But, the problem could be due to both hardware and software issue. Just send it back to the vendor. Less headache...
Yeh its definitely not a hardware fault. Its more like a freeze or slight confusion between WM6.5 and sense somewhere along the line....
I've thought of another thing which would also come under this weird behaviour category.
I noticed today whilst watching a video on the youtube app, using the up and down volume buttons on the side of the device would make the video freeze for abpproximately 1 second each time the button was pressed, it would change the volume up or down, but the bar would not appear on the screen so you have no idea what the level of volume actually is.
again soft reset solved this, but its just another on of those weird things
Back up and hard reset all the way.
dgtel2 said:
When we reset, we need to hold the "call-off" button. That's not a good design due to excessive pressure to the edge of the "capacitive" screen.
Click to expand...
Click to collapse
Don't use excessive pressure.
Why the "" round capacitive?
just a "make-up" ...lol ... again...those "..."

typing issue

typing seems to messed up lately buttons get get pressed makes ms feel like itisn't working correctly
anyone get the same issue ?
i have the same issue sometimes. it happens if the phone is very cold, if its connected to pc or mains charger or if the battery is 15% or below. i uninstalled the sensitivity tweak which helped a bit
Martyn Day said:
typing seems to messed up lately buttons get get pressed makes ms feel like itisn't working correctly
anyone get the same issue ?
Click to expand...
Click to collapse
It might be worth realigning the screen. Go to Settings/Menu/All Settings then select the System icon, and then 'Screen/Align Screen'
You will get the old Windows Mobile 'crosshair' alignment screen which was originally designed for stylus input, but using the normal part of your finger that you'd use for typing, just press over the crosshairs. This may or may not help!
I'm finding that typing is OK, provided I have "aligned" the screen.
However when switching from portrait to landscape alignment goes out of whack. Ok when reverted back to portrait. Also following a soft reset, or switching phone off, a re-alignment of screen is required.
Does the device store the alignment info, or is it reset after each reboot?
Also does device store an alignment profile for both portrait and landscape?
Anyone else notice this, and is there a fix?

The Infamous Unresponsive Digitizier Screen Possibly Solved!

Okay I wasnt going to post about this cause there have been way too many posts and alot of back and forth and debates and even flaming, but I stumbled across something that I think is the cause for MAJORITY of the issues with why we keep having this happen. It Happened to me Today, and I Found the cause.
Before ANYONE Flames me for bringing this up, READ the post, Remember I solved the cause of why it happens to most of us, I dont take responsibility if you choose to take it upon yourself to fix it! And I know 90% of the users are going to tell me I'm wrong or I dont know what I am talking about, so be it.
If you have nothing to add other then flaming the post, just hit the back button and be on your merry way and pretend you never saw it. But I am 98% sure I am right about why its happening!
So if your interested read on:
I actually for the first time had this, and I know this is going to get flamed but its not the Screen thats the problem. And I think (BIG IF) that the dreaded unresponsive screen issue that we keep reading about Majority of them I think is not the screen.
I have 2 HD2s and both have worked flawlessly without any problems, but today I was playing with my test phone that doesnt get used that much and I noticed after installing a new rom that my screen after I played with it for a bit went black (sleep) and when I woke it up it wouldnt respond, first thing that crossed my mind is I just lost my digitizier, and started wondering okay why, I went as far to re-flash WinMo stock HD2 rom, same issue, so I decided its time to find out exactly whats causing this, and I found it. I wasnt going to make a post again cause I figured people would be "Not another thread about this" but I know whats causing the screen issue, at least this is my suspicision and I have temporarily fixed mine.
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
I completely agree with you. I've had the "dead digitizer" since December. It was pretty apparent it was a hardware key problem, as I could generally solve the issue by pressing the "Off" button to turn the screen off, and then one of the other keys (usually the back button, but occasionally one of the others) to wake the screen up, and the digitizer would be alive again.
As I am still under warranty, I sent mine off last week, and expect to hear back within a few days. But if I had the confidence to open it myself, I was sure it would be fixed with a good clean.
Anyway, thanks for crystallizing all this into a post. Thanked!
THANK YOU SO MUCH FOR THE INFO. i have had so much trouble with unresponsive screen after installing typhoon 2.6.3 and it from holding down the red button all the time for install and the past millions times for everything else.
Thanks for the heads up
Sent from my HD2 using XDA App
U maybe be right about why this issue happens but if u rely on other key then will also wear out soon ...
What I did is I remapped my volume up n down keys to power and back button which I believe are the most used in android and then found a app to manage my volume in android that way I don't lose my sound on rhw phone
Also I went ahead and got a another app which places virtual buttons on ur screen so u can use then instead of the actual hardware buttons
For button remapping
get the BUTTONREMAPPER for android and for on screen android buttons get BUTTON SAVIOR
hope this helps
Sent from my HTC HD2 using XDA App
Good to know... will now wake my phone up with the green key as its hardly used in Android. Button Savior is a great app, been using it a while now. Took a bit to retrain myself to not use the back key.
Sent from my HD2 using XDA App
i'm going to agree with your hypothesis or at least suspect that dirt is probably a bigger factor than most people think in these cases. i just bought a non-responsive phone today and while i stuck my nail (yes, i should probably clip them) around the edge, in between the screen and housing, i was surprised to see just how much dirt was in between that crack. same with the area around the buttons; there's a lot of grime there.
since i just got the phone i haven't even opened it up but the first thing i'm planning to do is give it a good interior clean around the buttons for sure as that seems to be the sensitive spot. touch screen devices are very delicate and the micro particles of dirt which build up over time probably create a hazard that people really don't really anticipate. compound that with having to mash on those buttons all the time probably crams the debris in there even tighter.
i'll attempt to clean and check the contact as you suggested and will report back if it helped in my case.
About hardware keys:
I don't use them at all, only for wake up the phone (it can be wake up with any key)
There is an app in market called "button saviour" it's just excellent app to keep your hardware keys for a long time
AngelDeath said:
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
Click to expand...
Click to collapse
You just hit d nail on d head pal...My HD2's touchscreen also stopped responding and nothing i did (software-wise) worked...i flashed several WinMo ROMs and Android builds with no luck, till i read somewhere online dat some guy seemed 2 solve his touchscreen issues by installing "CleanRam", ran a level 3 clean up (use MyMobiler for this) and by pressing real hard on the red end key button..I did just dat and voila it works!!
I have a Tmobile HD2 which is no longer covered under warranty and i'm not willing 2 part with almost $200 here 2 have d whole lcd & digitizer replaced...I recollected dat in d forum i read the suggestion from, a lot of ppl came n posed their views on why it's not possible but i tell u it is cuz it worked for me..Nw i'm comfortably dual-booting WinMo & Android via sd. i use "button savior" and "extended control" to navigate and power down/reboot respectively.
Hweva i believe its not a permanent fix as it simply refuses 2 allow me run android full-time thru MAGLDR, & i think i know y..pressing down on d end button 2 launch MAGLDR/CWR options after install messes up d connection with d digitizer underneath and d touch screen thereby causing it 2 fail again when android boots up....I just might try opening it up myself n cleaning dat area up as u suggest but dat'll be when my current fix fails cuz as d saying goes "If it aint broken? then don't fix it"
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
AngelDeath said:
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
Click to expand...
Click to collapse
Hmm...i don't use d app but from wat i can gather on d dev's thread, you would have 2 remap ur volume keys to "Power"...Also checkout dis review 2 learn hw 2 mk d remapped button work even in sleep-mode.
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
CaCtuZ123 said:
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
Click to expand...
Click to collapse
If I'm to base how the HD2 is setup internally, they wouldnt replace the buttons, they would replace the contact or contact board under the buttons, remember the buttons are like a keyboard, they dont wear out, its what they push on that gets dirty or worn.
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
pauloviegas said:
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
Click to expand...
Click to collapse
Yeah HTC screwed up on dat...its just as said,1 has 2 be careful n avoid using d red end key button as much as possible 2 enable d device last much longer...And if u do ave 2 use it, press on d left-most part of d key (closer 2 d back arrow button) to get d job done.
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
big3d said:
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
Click to expand...
Click to collapse
Can that be done with other roms? And wouldnt a shortcut or a widget on the main screen also work?
on1ydabest said:
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
Click to expand...
Click to collapse
It all depends really Understand that not all HD2's go thru the same testing process when it comes out of the manufacturer. Also take into consideration that it also depends on how often you flash a rom, if your flashing a rom every day or every week expect that you will shorten the life of the end button, also it doesnt always mean that the button is bad, it could clearly be dirt underneath that could also be causing the issue. And I said the same thing when I saw posts about people saying that android killed their screen. I even responded to it but always maintained it was hardware, even though I didn have the problem, and I bought both my HD2's used in Dec. and the day it happened and I found out why I posted this, if I was to guess, I would say that I probably flashed both my HD2's close to 200 times with different roms, or upgrades, or testing fixes out.
So if your not a flash nut, then your probably safe. There are many factors that can play a role in the end button life cycle, And no two people use their HD2's the exact same way.
the non-responsive touchscreen problem happened to me this morning. I woke up trying to unlock my phone only to find that it would not respond to any touch gestures. I was however able to uninstall HSPL and Flash the stock WM6.5 rom since I was going to T-Mobile to get a replacement. When I took it to T-Mobile the employee resetted the phone by holding the 2 volume buttons and the power button then somehow the touchscreen started to respond to touch again. I was completely puzzled as I thought it was for sure a hardware problem. But now I'm going to flash Android and hopefully the problem will not arise again, if it does, back to T-Mobile I'll go!
What Android really needs is some sort of "X" button, or even a widget on the main screen that you can just tap and put it to sleep. The three most keys used in my opinion is the windows key (Apps that use it for a menu), the back key (Since there is no damn close button), and the end key (sleep, flashing, booting to magdlr).
Some one had a concept here of buttons that looked very similar to The desire HD, the greatest thing would be if someone could make the bottom of the htc sense (app drawer, phone, and the personalize) auto hide and have the desire HD buttons come up with a power button at the end and this way if you hit menu it would bring up the original 3 button screen.

Categories

Resources