Related
There are 3 key steps in making TomTom 5 work on an i-mate JasJar with a Bluetooth GPS.
Many tips are scattered around in different Forums.
Here is a COMPLETE overview of what to do.
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the JasJar and launch one by one from there with the explorer of the JasJar.
You can install voices the same manner by copying the CAB files to the Jasjar (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
http://www.htcclub.net/storage/ppcupd510.rar
Extract and copy the files to a folder on the JasJar and install them from there.
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
REMAINING PROBLEM
TomTom will only connect to the BT GPS when the Phone is switched on.
If you want to use your integrated car phone and just use the JasJar as GPS, you need to switch the Phone antenna off on the JasJar and the Bluetooth radio on (for the GPS connection). This worked perfectly before with TT3 and my i-mate PDA2K but now I am forced to activate the phone radio on the JasJar meaning that I can not use my car phone anymore !
I think it is a TT problem as I am able to connect to the GPS with other software without the phone radio switched on.
Any suggestions are welcome to solve this !
THANK YOU!
Hey i think i got something wrong in the registry :? I have:
HKEY_LOCAL_MACHINE\ControlPanel\GPS Setings
Then in there i have: defualt value not set
and
Group 0x2 (2)
I can't see a gps pael in my connection settings.Please help!!!!
jaythemagician said:
Hey i think i got something wrong in the registry :? I have:
HKEY_LOCAL_MACHINE\ControlPanel\GPS Setings
Then in there i have: defualt value not set
and
Group 0x2 (2)
I can't see a gps pael in my connection settings.Please help!!!!
Click to expand...
Click to collapse
I thought the same at first when I did it, no GPS panel. You have to make sure you exit the registry editor properly by Tools -> Exit, this saves the sertting. Then you need perform a soft reset of your device - after this, the GPS panel was now displayed on mine. Let us know how you get on
cheers for that sl9. Now my only poblem is getting it working.No matter what i do all i have in other bluetooth is:
qct data interface
RIL on COM6
COM7
serial cable on COM1
Infrared port
Ir on COM3
Any ideas?cheers
Follow the instructions in that post exactly and you should see COM0 appear in tomtom's GPS configuration screen... Try doing a hard reset, then try again. It does work
soft reset in between
I had trouble installing TT. My solution was: between every install/registry change: do a soft reset. Then do the next step and soft reset and so on...
Now it works like a charm!
jasjar crash
hi i follow ur guide but it crash all the time plz help
I tried to install TT5 and i have tried every way to do it but it will not install the ttn.cab it fails every time, i have soft reset after each cab install removed the sd card anyone any ideas
thanks
Chris
jaythemagician:
Open the file \Program Files\Navigator\navigator.cfg with an editor, you will see "COM7", change it to another COM port. In my case I changed it to "COM4" and now my JASJAR can connect to the Bluetooth GPS.
can't seem to find that in the reistry....
no, not in the registry, "navigator.cfg" is a file in the filesystem. Use windows explorer, have active sync running, then you find the file in "Mobile Device->My Windows Mobile-Based Device->\Program Files\Navigator" catalog
not quite related but when i installed TTN5.1 landscape would work, since update, on the reinstall the rotate menu option is now just a turn picture upside down so it dosent work in landscape anymore, ive tried clearing all traces and installing twice since update now
sorted it. Thanks everyone. One more thing....why does it run so slooooooow
How did you guys install your maps? Normal setup, or another way?
maps are in folders on root of SD card, ie Great-Britain-Map, TTN5.1 just see's them and you choose it during the installation wizard on the JJ
hi Parw
what editor u use to open navigator.cfg file because i used notepad nad wordpad i can see only the boxes
Regards
Gugi
Hello,
How can I install the folder "voices" because this folder is not a ".cab" on my TT5 sd ?
Thanks for your help....
gugi_sat:
Two things:
1. If you don't see a COM port in the cfg file. Open tomtom and select COM7 in the GPS configuration. Close tomtom, the cfg file should now have been updated with the new port setting.
2. To be sure that you don't mess with the cfg file use a hexeditor. You will find one here -> http://www.hhdsoftware.com/free-hex-editor.html#Download
Hi parw
thanx for reply
i am not able to go that far in tomtom because it just stop after wizards
and i am using wired tomtom gps.
Please read my post below which explain the problem i have
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=5377&catid=26
Regards
Gugi
There are only 2 com ports to use for outgoing in bt settings on k-jam com6 and com7. How do we go about getting the bt working for this?
regards
here are 3 key steps in making TomTom 5 work on an i-mate K-JAM with a Bluetooth GPS.
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the K-JAM and launch one by one from there with the explorer of the K-JAM
.
You can install voices the same manner by copying the CAB files to the K-JAM (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
http://www.htcclub.net/storage/ppcupd510.rar
Extract and copy the files to a folder on the K-JAM and install them from there.
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 6.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 6 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
orignal posting here
http://forum.xda-developers.com/viewtopic.php?t=28386&highlight=tomtom+5+wm2005+gtps
thereaperman said:
here are 3 key steps in making TomTom 5 work on an i-mate JasJar with a Bluetooth GPS.
Many tips are scattered around in different Forums.
Here is a COMPLETE overview of what to do.
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the JasJar and launch one by one from there with the explorer of the JasJar.
You can install voices the same manner by copying the CAB files to the Jasjar (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
http://www.htcclub.net/storage/ppcupd510.rar
Extract and copy the files to a folder on the JasJar and install them from there.
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
REMAINING PROBLEM
TomTom will only connect to the BT GPS when the Phone is switched on.
If you want to use your integrated car phone and just use the JasJar as GPS, you need to switch the Phone antenna off on the JasJar and the Bluetooth radio on (for the GPS connection). This worked perfectly before with TT3 and my i-mate PDA2K but now I am forced to activate the phone radio on the JasJar meaning that I can not use my car phone anymore !
I think it is a TT problem as I am able to connect to the GPS with other software without the phone radio switched on.
orignal posting here
http://forum.xda-developers.com/viewtopic.php?t=28386&highlight=tomtom+5+wm2005+gtps
Click to expand...
Click to collapse
sorry to but in, but works slightly diferently for me as i also only had com6 & 7 to choose from
hope this makes sense
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In the GPS control panel, select the GPS program to 6 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 6 free. Select COM 6 and close TT5.
5. At the GPS control panel again, now select COM (none)
6. At BT: select OUTGOING port to 6.
7. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
ps took a couple of resets before the new gps icon would show in connections, also after editing the reg you must exit the program otherwise the changes arnt saved
thanks for that. I managed to get running on the jasjar,just the.k-jam that stumped me. aoane more quesrion though when you set your gps to 6 do you set your bt to com7?
thanks again
sorry, where are you talking about? in bt comports outgoing is set to (com6)
I have changed my orignal post to mach how it works on the K-JAM(so some people do not get confused :wink: )
thanks, now you made my post after your altered original one :? look like i'm talking a load of rubbish!
:lol: :lol: :lol: :lol: :lol: :lol: :lol:
maybe i should edit my post so my quote of your quote is the same?
is there an emotion available scratching it's head? :lol:
My tt voice is not working.....
HELP
have you gone into the voice section of tomtom to see if there are any voices to select from and test?
there are no voices to test...but they are instaled
check my blog, all answers revealed, voices and bluetooth, etc.
www.beyondthetech.com/blogs/kjam
when you say :
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
First I don't see any KEY called HIDE ??
I do adda DWORD called GROUP under ...../GPS/ with value 2 (decimal)
I did 8 reset and I still don't see the GPS under settings/connection ???
how can I have it show ?
thanks
help please !!! :shock:
first of all make sure you do use the exit from the reg edit program you have used, otherwise changes are not saved.
then do as you already have, a soft reset.
on mine it a couple of resets for the new icon to appear.
good luck
yes I verify the change is made.
I already did 10 soft reset still don't see GPS icon ??
I din't have a hide to remove when I went into the registry,
if i now go into
HKEY_LOCAL_MACHINE
ControlPanel
GPS Settings
i have
(Default) (value not set)
Group 0x2 (2)
and back in the real world in Settings i now have 8 icons, including one new one called GPS
perhaps instead of doing a soft reset, turn the kjam completely off and see if that helps
finally managed to get tomtom 5.1 working on the wizard.. phew
Now there's one thing regarding voices: tt only seems to recognize voices in the \tomtom\tomtom\ folder (in main memory). I'd like to put the voices on the storage card, but haven't found a way to get it to recognize additional voices there. creating a \voices dir on the sd card didn't work -- any other tweaks (main memory is kinda limited after all)?
hey guys, any of you having trouble with adding your maps?
My maps now say they need activating. It never said that before.
Cheers
Trying to follow this sionce I got it initally working and now failed
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 6 free. Select COM 6 and close TT5.
5. At the GPS control panel again, now select COM (none)
6. At BT: select OUTGOING port to 6.
7. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
-
basically - in TT5 v5.21 I dont have under option 4 - I dont have a com port of 6 under other Bluetooth GPS
Any ideas?
Scott
TT Nav 5 Port from XDA 2 to Wizard
I have an XDA 2 now with TomTom on. If I transfer the software across as above and then change my device code with TomTom should everything work (e.g. Traffic updates, etc.) ??
<Fingers crossed>
TIA Dave.
After having many troubles and failing to get tomtom 5 running on my mini s.
Just like to know if tomtom navigator 3 is compattable with mini s?
I can get original software on cd with major roads of europe for £30.
Not sure if it works. if it does you will have to copy the cabs over manually as the installer will almost certainly not work.
On a side not, personal experience with TTN3 & BT GPS was very bad, so bad infact that i ditched my TTN3 and used an old copy of 2 until i replaced my GPS with a wired (was CF in an iPaq).
Maybe it was a fault with the iPaq BT stack but i used to get random disconnects while driving and it basically made TTN3 useless. Just a point as you cant use a wired GPS with the Wizard...
Also, if you need help with TTN5 read the current posts, and if you still have problems make a new post saying what you have done, and what you are having problems/errors with.
For me it was easy to make TT5 running on my Wizard. I wrote this about installation (sorry, it's in french and I will soon add some printscreen)
here is the link
I used this guide and got Tomtom 5 working a treat hope this helps
Surefire method of installing TomTom Navigator on your K-JAM
This post is in no offense to anyone who has previously posted a quick tutorial or a quick-and-dirty method of installing TomTom Navigator 5.10 on the K-JAM (or Windows Mobile 5.0 for that matter), but there has been a lot of inconsistencies with where files are to be placed, how things should be installed and in what order, and if some steps need to be performed or not. In addition, the fact that it's likely coming from people who don't have English as a first language, it makes it very hard to follow otherwise simple directions on how to get this program properly installed and running on one's K-JAM.
Thus, I have detailed a step-by-step procedure based on completely on firsthand experience, and repeated for verification. It requires your K-JAM (obviously), your ActiveSync'ed desktop, your Bluetooth GPS device, and the original CAB/voice/map files. What is important in my method is that I did NOT have to perform any install of 5.00, followed by 5.10, and I did not have to perform any registry changes to enable the GPS applet in Windows Mobile 5.0, either.
Please keep in mind that TomTom Navigator 5.10 is not officially compatible with Windows Mobile 5.0, so you are not likely to get any support on the product on this OS.
Download the latest version of the TomTom Navigator application from their website.
Install the map files onto your mini-SD card. It should be placed right at the root, and will have a path on your K-JAM, such as:
\Storage Card\New-England_and_Mid-Atlantic-Map
Power on your Bluetooth GPS, and prepare it for pairing, if necessary.
Go to your Comm Manager and enable the Bluetooth radio on K-JAM and pair your Bluetooth GPS to it.
Once properly paired, put a check next to Serial Port as the device's available service.
Minimize the on-screen keyboard, if necessary, and click on the next tab labeled COM Ports.
Click New Outgoing Port and select COM6, while leaving Secured Connection still checked. Your device should now be listed with (COM6) next to it.
Install all the CAB files in the following order:
GPS.CAB - the conduit between TomTom and your Bluetooth COM port
PIMAddIn.CAB - the conduit between TomTom and your Outlook contacts
WZD.CAB - the Today plug-in (completely optional)
TTN.CAB - the actual application and data files
If you are getting any issues with installing any of the CAB files, try soft-resetting and launch the same CAB file again.
On your desktop, launch Notepad.
Type & \Storage Card\New-England_and_Mid-Atlantic-Map\ or whatever the name of your main map folder is on your mini-SD card. Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as CurrentMap.dat. Make sure it doesn't end up as CurrentMap.dat.txt!
Create a folder on your K-JAM called \My Documents\TomTom.
Copy your newly created CurrentMap.dat file from your desktop into \My Documents\TomTom on your K-JAM.
Create a folder on your K-JAM called \TomTom\TomTom. Yes, strangely enough, that is a TomTom folder under the TomTom folder on the root of the device.
Copy your (celebrity or standard) voice files into the \TomTom\TomTom folder.
Soft-reset your K-JAM to allow the Today plug-in to show up and the TomTom Navigator icon to appear in the Start Menu. If the Today plug-in doesn't show up, it's likely that it's simply disabled in the Today plug-ins list, and you can enable it later.
Launch TomTom Navigator.
Set up your preferences (left/right-hand, time format, voice, etc.)
Your map should now be automatically selected and loaded, based on steps 9-13.
Activate your map through the normal registration methods.
Configure your Bluetooth device as Other Bluetooth GPS and select COM6: as your port.
Confirm that your Bluetooth device is working by clicking on the GPS signal strength indicator on the bottom-right of the screen, then the same indicator on the right on the following screen.
That's it! Enjoy your TomTom Navigator on your K-JAM!
Credits:
http://forum.xda-developers.com/viewtopic.php?t=28386
http://www.howardforums.com/showthread.php?t=742385
http://forum.xda-developers.com/viewtopic.php?t=27641
http://forum.xda-developers.com/viewtopic.php?p=160768
I hope this step-tested, detailed tutorial will be the end-all solution for everyone having issues in getting TomTom up and running on their K-JAMs, as I've been sharing the pain with everyone trying to get some sort of navigation software working on Windows Mobile 5.0. Now, you can take a breather and go travel somewhere with your new toy and not have to worry about surfing to MapQuest.com on an EDGE connection in the middle of nowhere.
By the way, my Bluetooth GPS device is the GlobalSat BT-338 GPS, a SiRF III device that can be picked up real cheap from MadMonkeyBoy. There is a firmware update to 3.1.1 available here.
NOTE: If you've tried the other methods posted elsewhere that instruct you to enable the GPS applet by modifying the registry and so forth, you can either hard reset your device and follow my step-by-step method above, or reverse their work by performing the following steps:
Go to the GPS applet under Settings.
Change both the GPS communication and hardware COM ports setting back to None.
Go to the last tab and uncheck "Manage GPS Automatically."
Lastly, disable the applet entirely by adding the Redirect null string value back to that GPS Settings key in the registry. (See those previous instructions to find the exact location in the registry and simply put back the entry you deleted or changed.)
Soft-reset your K-JAM for changes to take effect.
Remember, TomTom Navigator 5.10 is NOT designed for Windows Mobile 5.0 natively, so you can't expect the OS to manage something that older navigation software is not expecting the OS to.
Finally, if for whatever reason you're not able to communicate with your Bluetooth GPS properly because you're working from a failed install from previous instructions, try to delete the Outgoing COM Port entry, followed by the entire partnership between your K-JAM and the GPS device, then start again.
UPDATE: I have removed the link to the TomTom Navigator installer CAB files. You can visit www.tomtom.com and download it from there. Also, you can install the voices to the \Voices or \Storage Card\Voices folder.
Can an admin quote/copy the above post and sticky it for a couple of months - save a new "tomtom 5 help" post every few days.
Please?
But does Tomtom Navigator 3 work on Wizard? If so, how does one install it?
After reading may threads on here about people not being able to get TomTom working with US maps once they have upgraded to v5.21 I thought I would look in to a way around the troubles.
Here is what I think peoples problems are:
1. Bluetooth GPS could not be paired under TomTom v5.00
2. Cracked versions of maps or even maybe real v5 maps of the US don’t work under v5.21
People want US maps AND Bluetooth GPS i.e. numbers 1 AND 2, but can't find a way to have their cake and eat it.
After many installs and trials of TomTom v5 and v5.21, I think I have just hit upon a solution. The basis of the problem is that TomTom v5 does not let you use a COM port that your Wizard lets you set, so how do you fix this.....
- I installed TomTom v5 as per the many sets of instructions on the forums, ie copy CAB files to your SD card and install.
- Next pair your BT GPS to COM port 8.
- Run TomTom and set up as normal, when you get to the GPS setup, select COM port 2
- Close TomTom
- Copy navigator.cfg (installed in /Program Files/Navigator) to your PC
- Using a hex editor edit navigator.cfg
- Change ONLY the entry for the number after the work COM to 8 (or what you set the COM port to above)
- Copy the file back to the original location
- start TomTom
You should see that the BT GPS is now recognised; also you should see that you can select all the maps that you have installed.
I have not tested that the BT GPS works in the UK and the US ‘cos I can’t be in 2 places at once, but I hope that some of the US users can verify this before I move out mext month.
Let’s hope this is the final answer I have been looking for
Wow. That's great, thanks for that.
i've just spent the last week with the Bluetooth problem, only to realise about an hour ago that I had the answer all along and I was just too stupid to realise.
In case anyone out there has been battering their head on their laptop in frustration (and is similarly mentally challenged as myself), I have a hint for those using the not entirely legal version of TT.
If you have the one marked 5.21 or have one which has 5.00 and 5.21 exe files in the zip somewhere, you need to copy across the cabs (as described on many forums - I have messed about so much I can't describe a full process to get to where I am now but I'll try to summarise below)
Once the cabs are copied, version 5.00 will work OK but will have the BT COM port problem.
Then stick the 5.21 cracked exe into the Program Files\Navigator folder ( i did not delete the old one, just renamed it incase it went wrong) and then when you run the new one it runs as before but with the COM port options.
My mistake was when I first got the files, I tried running the exe on my PC and in the phone. It doesn't work until you have the cracked 5.00 app already working and only then if you stick it into the Navigator folder.
Sorry if this is just stupid but I have browsed god knows how many forums over the past 2 weeks and so many people seem to be having similar problems (some with genuine tomtom and some not saying but hey, if they had paid for it in the first place the upgrade would be easy, right??).
I'll try to summarise the steps I took to get mine working (these are my best guess of the basics to get it working, skipping the hundred other things i have tried which failed to help.
1. installed cabs (WZD, GPS, PINAddIn & my desired Voice) from pocketpc and voice folder BUT had problem with ttn cab as just gave 'unsuccessful' message
2. Copied maps into storage card in their respective folders (NB apparently need to have at least 2 maps to get it to recognise them, if you only have one just copy the folder and rename one of them)
3. Downloaded WinCE Cab Manager (freeware for first 15 uses) from OCP
4. Opened ttn.cab in WinCE Cab Manager and extracted exe and data.chk file and put into Navigator folder in Program Files
at this point the 5.00 version should load, set up maps and voice and works fine apart from GPS
5. Rename (or delete) the TomTom Navigator.exe and replace it with the 5.21 one from the cracked folder.
all the GPS stuff should be easy from there as COM port 6 should show up (and is covered elsewhere anyway)
I think that's the essential points. There is a lot of superflouous stuff that comes with TomTom that you don't need to get the main function working so that's why there is a minimum of installs.
If there's anything I missed, please correct me.
Anyway, I am now only 1 step away from being able to us the darn thing after 2 weeks of trying.
The main reason I got it was to navigate in Germany when I go on holiday in June as I have a few serious days of driving and want to be able to navigate easily.
I have been able to get my Germany and Great Britain maps working fine but as I live in Australia, I want to get used to using TomTom now with my Australia maps...BUT THEY WILL NOT LOAD!!!
They show up on the screen when I pick my maps but the screen just freezes when i select Australia.
Any ideas???
Heres a navigator.cfg already set to use com port 7.
Anyone with v5 can set their outgoing port on the BT device to port 7 and replace their .cfg file with this one and it should work - I just tried it.
Bilbo...you are my new hero.
I'm really glad to know that my $100 and 4 hours of hacking around with this thing weren't all in vain. Thank you SO much.
<3 <3 <3 8)
hi pewe,
thanks for the post. have got the same com port problems and breaking my head over it trying to get a rikaline gps work. could please please post a detailed answer on what to do with the file u have posted. i copied the file over the one i had in the pda but now have lost com port 4 and no 7 has appeared. please help
cheers, many many thanks.
pewe said:
Heres a navigator.cfg already set to use com port 7.
Anyone with v5 can set their outgoing port on the BT device to port 7 and replace their .cfg file with this one and it should work - I just tried it.
Click to expand...
Click to collapse
hi weevel,
looked at your post. have the same problem. would have a copy of the cracked 5.21 exe. cant seem to find one and unable to work my tomtom. have got the cracked 5.0 working properly but no gps. pleeeeeeease help.
cheers.
weevel said:
Wow. That's great, thanks for that.
i've just spent the last week with the Bluetooth problem, only to realise about an hour ago that I had the answer all along and I was just too stupid to realise.
In case anyone out there has been battering their head on their laptop in frustration (and is similarly mentally challenged as myself), I have a hint for those using the not entirely legal version of TT.
If you have the one marked 5.21 or have one which has 5.00 and 5.21 exe files in the zip somewhere, you need to copy across the cabs (as described on many forums - I have messed about so much I can't describe a full process to get to where I am now but I'll try to summarise below)
Once the cabs are copied, version 5.00 will work OK but will have the BT COM port problem.
Then stick the 5.21 cracked exe into the Program Files\Navigator folder ( i did not delete the old one, just renamed it incase it went wrong) and then when you run the new one it runs as before but with the COM port options.
My mistake was when I first got the files, I tried running the exe on my PC and in the phone. It doesn't work until you have the cracked 5.00 app already working and only then if you stick it into the Navigator folder.
Sorry if this is just stupid but I have browsed god knows how many forums over the past 2 weeks and so many people seem to be having similar problems (some with genuine tomtom and some not saying but hey, if they had paid for it in the first place the upgrade would be easy, right??).
I'll try to summarise the steps I took to get mine working (these are my best guess of the basics to get it working, skipping the hundred other things i have tried which failed to help.
1. installed cabs (WZD, GPS, PINAddIn & my desired Voice) from pocketpc and voice folder BUT had problem with ttn cab as just gave 'unsuccessful' message
2. Copied maps into storage card in their respective folders (NB apparently need to have at least 2 maps to get it to recognise them, if you only have one just copy the folder and rename one of them)
3. Downloaded WinCE Cab Manager (freeware for first 15 uses) from OCP
4. Opened ttn.cab in WinCE Cab Manager and extracted exe and data.chk file and put into Navigator folder in Program Files
at this point the 5.00 version should load, set up maps and voice and works fine apart from GPS
5. Rename (or delete) the TomTom Navigator.exe and replace it with the 5.21 one from the cracked folder.
all the GPS stuff should be easy from there as COM port 6 should show up (and is covered elsewhere anyway)
I think that's the essential points. There is a lot of superflouous stuff that comes with TomTom that you don't need to get the main function working so that's why there is a minimum of installs.
If there's anything I missed, please correct me.
Anyway, I am now only 1 step away from being able to us the darn thing after 2 weeks of trying.
The main reason I got it was to navigate in Germany when I go on holiday in June as I have a few serious days of driving and want to be able to navigate easily.
I have been able to get my Germany and Great Britain maps working fine but as I live in Australia, I want to get used to using TomTom now with my Australia maps...BUT THEY WILL NOT LOAD!!!
They show up on the screen when I pick my maps but the screen just freezes when i select Australia.
Any ideas???
Click to expand...
Click to collapse
but no gps
Click to expand...
Click to collapse
Have you tried V5 with the navigator.cfg fix discussed here
http://forum.xda-developers.com/viewtopic.php?t=46828&postdays=0&postorder=asc&start=0
hi pewe,
is it the reg editing u are reffering to in that forum. please let me know.
cheers
pewe said:
but no gps
Click to expand...
Click to collapse
Have you tried V5 with the navigator.cfg fix discussed here
http://forum.xda-developers.com/viewtopic.php?t=46828&postdays=0&postorder=asc&start=0
Click to expand...
Click to collapse
You can try that - but the easiest solution to try first is the one where you set the GPS in TT to any port, setup the BT device config to outgoing port 7 then replace the navigator.cfg. That seems to work for most people.
hi pewe,
another small issue. us maps dont work with 5.21 upgrade. is it a question of downgrading to v5 before a trip and borrowing a friends tomtom reciever to work there and come back change again or is there anither way.
cheers
I have tried that with my Cinular 8125 (WM5), in TOMTOM set the gps to com 2 then switch the cfg file adn it still doesnt work, i have MS streets and maps working fine, so i know the GPS is good.
I have a new idea lets work with 5.21 and see see what version map it reads then edit our usa maps and change the version. Has anyone tried this, ive been looking all over for a TOMTOM map editior, but no luck. I have all the USA maps so if you need one let me know
pewe said:
Heres a navigator.cfg already set to use com port 7.
Anyone with v5 can set their outgoing port on the BT device to port 7 and replace their .cfg file with this one and it should work - I just tried it.
Click to expand...
Click to collapse
Hi,
Have tried replacing my cfig file with the one you supplied but this hasnt worked...my version of tomtom however appears to be 5.1
Do I need a different Cfig file for this version ?
Many thanks
Steve
Do I need a different Cfig file for this version
Click to expand...
Click to collapse
Not sure - I've never used V5.1.
What com ports does TomTom offer you when you try to configure the BT device?
pewe said:
Do I need a different Cfig file for this version
Click to expand...
Click to collapse
Not sure - I've never used V5.1.
What com ports does TomTom offer you when you try to configure the BT device?
Click to expand...
Click to collapse
Config within Tomtom offers -
COM9:
Infrared Port
COM3:
COM0:
COM2:
Serial Port
These are the 'normal' options - so I can't understand why it doesnt work.
Are you sure that the BT is setup on your device as com port 7?
If it is and it doesn't work, try setting it to com port 6 and try this config file.
pewe said:
These are the 'normal' options - so I can't understand why it doesnt work.
Are you sure that the BT is setup on your device as com port 7?
If it is and it doesn't work, try setting it to com port 6 and try this config file.
Click to expand...
Click to collapse
Certain my BT device was set to Com port 7, still tried this alternative Cfg. file and changed port to 6 with the same result in that options within tomtom remain unchanged as stated before (assume the expected result should be to provide additional Com ports within tomtom Configure screen to enable selection of Com port 6 ?)
Not sure then.
Maybe V5.1 has some differences about it.
pewe said:
Not sure then.
Maybe V5.1 has some differences about it.
Click to expand...
Click to collapse
Cheers anyway...
Other forums suggest that installing the V5.2 update from tomtom will fix the comm port bug....not sure however if this will wreck all the files I have so painstakingly installed. Any ideas if running the tomtom update is safe ?
Not sure - it depends what you have installed. Some have reported problems with Maps from V5/V5.1, but mainly in the US. Mine went from V5 to V5.2 without a problem.
If you backup everything before you upgrade you can always re-install..
How to get TOMTOM Working with UK and USA Maps
I have TOMTOM 5.21 on IPAQ in the UK and wanted to load the Michigan Map for a business trip that I have next month.
Having downloaded the USA Maps I spent all day trying to get TOMTOM to recognise the USA Map with no luck.
Read all the forums and tried one or two tips but to no avail. Then I tried something quite simple.
1. Install all the way to 5.21 in order to get Bluetooth GPS working. Once done this makes the correct .CFG file.
2. Simple back up the 5.21 executable or rename.
3. Copy the cracked 5.0 executable into the navigator directory. Voila ! It retains the Bluetooth settings AND it allows me to load the USA maps.
Wont be able to properly confirm the USA maps work 100% till next month but UK map work just fine and when I load the michigan map it lets me browse but cannot plan a trip cos GPS says I am out of the scope of the map.
So looking good.
hi have tried all sugestions on the forums but still no lucck im using tomtom 6.02. could someone be nice enough to post directions to how they got it working step by step thanks.
1) Installed WM5torage.
2) Copied my CAB files to the Microdrive root.
3) Installed each of the cab's, pointing them to the Microdrive.
4) Let TT reboot the device
5) Copied a 'new' executable to the correct location
6) Started TT
7) Ran the setup routine (Language, Units e.t.c)
8) Selected the Map
9) Set my 'home' location
10) Navigated away.
Only problem I had was getting the voices working (as noted on another post). But a different build cured that problem. I'm using 6.010 though. I've used com4 and (after setting up the GPS module) com 1, which both work quite well.
what do you mean you Copied a 'new' executable to the correct location how do you do that thanks
moh6299 said:
what do you mean you Copied a 'new' executable to the correct location how do you do that thanks
Click to expand...
Click to collapse
He's talking about a crack!
Out of interest, how did you set up the GPS? Having issues with mine!
I might have been, not that I can approve of such activities of course! You must always buy licenced software!
I've got my GPS set to 'Other NMEA GPS Receiver', Baud Rate 115200, Com1.
I've previously used the same settings on COM4, but then I've activated the GPS applet within WM5 to map the port to other applications, so I can use TT or Windows Live! Maps with Reperion Tracker. But I'm sure the first time I installed it, it detected the GPS straight away anyway.
sory but could you pm me how you did this I've activated the GPS applet within WM5 to map the port to other applications, so I can use TT or Windows Live! Maps with Reperion Tracker.