Hi mates, actualy i found this:
-Cyberon voice command use the record button to start, but you can do another trick:
1-Install the latest spb pocket plus
2-Choose one of the tabs (lets say MAIN) and click add items
3-Choose custom and at the botton left click add/file and then browse the windows folder and choose "sddialer.exe"
4-Now you can start cyveron voice command from your selected tab on the touch screen.
All we need now is some one that can find a way to point the "head set button" to this new short cut.
OK I tried MS Voice Command, didn't like it & decide to get back to the old good Voice Speed Dial...
Unfortunately when i press a button on my BT headset it only brings up phone application - there's no possibility to use voice dialling
I tired to replace the registry string "HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand" with a sddaemon.exe and then with sddialer.exe - just for sure, but this solution didn't work
Can anyone check its own Wizard and come up with any solution?
I would appreciate pasting the actual correct registry keys from Voice Command section. Do I nedd to create a key called path or should I just place everything under default value? (I've already tried both....)
mikolajek said:
OK I tried MS Voice Command, didn't like it & decide to get back to the old good Voice Speed Dial...
Unfortunately when i press a button on my BT headset it only brings up phone application - there's no possibility to use voice dialling
I tired to replace the registry string "HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand" with a sddaemon.exe and then with sddialer.exe - just for sure, but this solution didn't work
Can anyone check its own Wizard and come up with any solution?
I would appreciate pasting the actual correct registry keys from Voice Command section. Do I nedd to create a key called path or should I just place everything under default value? (I've already tried both....)
Click to expand...
Click to collapse
Try the cab in this thread... I created the cab and tested it on my wizard...VC 1.6 works flawlessly for me... Good luck
http://forum.xda-developers.com/showthread.php?t=283412&page=5
Thanks, but it didnt' work
I installed the cab and then changed the file in the path for the original voice command. But pushing the button still brings up the phone... :|
soooo is anyone working on this for the hw6900? or are we waiting for the update from microsoft?
I would love lend a hand to anyone willing to try, but unfortuantely my technical know how is not as high as my enthusiasm...
even in the mS Mobile page says, the voice commands does not works with the Ipaq, is an issue with the buetooth stack, I know some people change it and has a different stack, but...after a while they go back, because has more issues than solutions, sorry.
folow next step:
1. copy shortcut voicecmd.exe from \program files\voice command to \windows\start menu\programs.
2. open buttons (start\setings)
3. Assign a program to button 1 (press-n-hold) assign voicecmd (not assign voice command)
This procedure work 100% microsoft voice command 1.6 my 6915
spgi said:
folow next step:
1. copy shortcut voicecmd.exe from \program files\voice command to \windows\start menu\programs.
2. open buttons (start\setings)
3. Assign a program to button 1 (press-n-hold) assign voicecmd (not assign voice command)
This procedure work 100% microsoft voice command 1.6 my 6915
Click to expand...
Click to collapse
This is how the program is ment to be used, but what we are trying to accomplish is starting the program (or voice prompt) via pressing the button on our bt headset.
anyone working on this?
TRY THIS ONE
http://forum.xda-developers.com/showpost.php?p=1282191&postcount=28
Hi all,
has anyone figured out yet if you can asign the left button for long press to activate Microsoft Voice Control?
Microsoft Voice Control is simply not available for Leo, yet.
ahaaee said:
Microsoft Voice Control is simply not available for Leo, yet.
Click to expand...
Click to collapse
Loaded on Leo fine. Anounces calls/emails/texts but no button to activate for voice control
Work around to activate any piece of software through left button/long press:
Find the right program (exe) file;
Copy the file;
Paste is as a shortcut;
Rename the shortcut file to "long_send";
Move the shortcut file ("long_send") to the Windows folder.
I've learned this trick somewhere in this forum and it works perfect.
Willem (Netherlands)
Okay, so I'm using Google Voice with call presentation on, and I want to setup a shortcut to send a '1' to the phone to accept an incoming call. I just got a bluetooth watch and I want to be able to have the watch send the key so I don't need to dig out my phone when I'm in the car.
So, to test this a little bit I installed KeyPress and I setup that if I double press my start button in AE Buttons, it runs KeyPress with the parameter of 97. This works perfectly. No issues at all.
But when I try to create a short cut, everything fails. If I just press tap VJKeyPress, I get the little "help" screen. If I create a shortcut, and tap it, I also get the help screen. But when I try to modify the shortcut to pass the '97', then it fails.
I'm guessing that I'm missing something in the syntax, but I can't figure it out.
I have the path, in quotes:
"\P F\vijay555\VJKeyPress\VJKeyPress.exe"
Then I've put 97 at the end just plain, in quotes, in <>, I've put in right behind the .exe inside the quotes... Nothing seems to work at all. I'm at a total loss.
Anyone have a suggestion?
Hi,
Could you send me a screenshot of the configuration screen in AE Buttons.
I can't think why it wouldn't work, but what you could do is create a normal shortcut that launches VJKeypress with the required parameters, and then use AE Button to launch that .lnk shortcut itself, rather than VJKeyPress.exe
Should you get really stuck, VJBrisk might be able to help you, but I think the above should be adequate.
Drop me a PM (and post in the thread) again if you get stuck.
V
Oops... I didn't think I explained myself properly.
The AE Buttons is WORKING. It's the normal shortcut link that I can't get to work... and that's the thing I really need to get working.
Sorry, my bad, didn't read it properly.
I normally put example shortcuts in my cabs, but curiously I've got none in the cab on my phone. Can't believe the app is nearly 5 years old! Wow.
Anyway, I just tried making a shortcut.
If you paste the following:
Code:
55#"\Program Files\Vijay555\VJKeyPress\VJKeyPress.exe" 133
into a text document, and rename it Test.lnk, and copy that over to your phone, it should create a shortcut that locks your phone.
If that works, just change the parameter to do what you want.
What app are you using to create shortcuts?
And what's the significance of the \p\f in your first post?
V
A bit more information...
I tried to write a simple MortScript to run this as well. According to the MortScript manual, to run an app, you use this command:
Run ( "\path\AppName" [,"Parameter"] )
In other words, the path and the command first, and then put in the optional parameter. When I put in just the app name:
Run( "\Program Files\vijay555\VJKeyPress\VJKeyPress.exe" )
And run the script, I get the little help popup as I would expect. When I put in the parameter:
Run( "\Program Files\vijay555\VJKeyPress\VJKeyPress.exe" , "97" )
Nothing happens.
vijay555 said:
If you paste the following:
Code:
55#"\Program Files\Vijay555\VJKeyPress\VJKeyPress.exe" 133
into a text document, and rename it Test.lnk, and copy that over to your phone, it should create a shortcut that locks your phone.
Click to expand...
Click to collapse
Okay... well that locked the phone fine.
If that works, just change the parameter to do what you want.
Click to expand...
Click to collapse
I'm using both the text editor on Windows and Word on my PPC (not saving it in Word Format when prompted).
What app are you using to create shortcuts?
Click to expand...
Click to collapse
Just Copy the original file and then paste as shortcut.
And what's the significance of the \p\f in your first post?
Click to expand...
Click to collapse
Didn't feel like typing out \Program Files\.
Okay, so using the '133' definitely worked, but when I change it to 97 (the code to send NumPad1), it doesn't work.
But it DOES work when I tell AE Buttons to run VJKeyPress with the parameter of 97. Ugh... very odd.
Just for the fun of it, I also tried setting up a button in AE Buttons to run the shortcut that has '97' in it. That didn't work. I'm at a complete loss to figure out what's going on.
It may be that the keypress is occurring, but it's being fed into AE Buttons rather than the Phone Dialler, ie if when you press the required button, AE Button becomes active, which launches VJKeyPress, which presses 1 <b>within</b> AE Button, not the phone dialler.
You could test this by trying other keys and seeing what happens.
Also try activating Word or something else on your phone and launch the shortcut - see if the desired key gets pressed.
Also, you said NumPad1 - this is the number pad on a pc keyboard.
Try 49, which is just key 1.
V