Hello
Recently i had my number accidentally changed to another number by sprint ( when trying to change number on another handset)
And so they tried to program the phone by having me putting in ##0 something something # and it didn't work.
I was wondering if you guys had any ideas?
Try This!!!!
Well, something like that happend to me after updating my rom, if you use the official rom then dial ##778, but if your rom is cooked then dial ##778#. that able you to enter the EPST menu, I hpoe I could help.
Related
I recently ported my number to sprint but before then I changed the rom on my vogue and now the code the customer rep gave me to change the MDN and MSID don't work. How can I change my MDN and MSID now?
I would flash it with the standard Sprint ROM, set up the phone settings, then flash the ROM back to whatever one you want.
No wait don't do that yet. Try this. Put this program and .dll file on your phone, in my documents perhaps. Now run GetSPC, enter the ESN hex # with any letters in CAPS and hit "go" and it should give you the spc. Now hit "talk" and put in ##******# (****** being the 6 digit # u get from GetSPC) and then go to edit. U should be able to change them from there
have you tried ##402535# and then edit?
I am having the same trouble
I am having the same trouble only I did not flash this phone I bought it this way and can't get in to set the msid. I cant even get the link with my computer to work but I did got the get spc files on my memory card and put it in and used astro an tryed to use it but it says it dont know what to do with am exe file. I have a htc touch 6900 and am stuck. I am such a newbie to phones so I am lost. I tried the ## number that the last guy posted . Any one have any other ideas.
Thanks
Randy Skidmore said:
I am having the same trouble only I did not flash this phone I bought it this way and can't get in to set the msid. I cant even get the link with my computer to work but I did got the get spc files on my memory card and put it in and used astro an tryed to use it but it says it dont know what to do with am exe file. I have a htc touch 6900 and am stuck. I am such a newbie to phones so I am lost. I tried the ## number that the last guy posted . Any one have any other ideas.
Thanks
Click to expand...
Click to collapse
The easiest way (at least for me) is to change all this stuff via WM. Just flash NFSFan's rom and change this via PST programming. Once you are done, flash back to Android.
I am running NFSFan's WM6.5 rom and am having the same issue. I cannot activate my phone because it will not take the "##*****#" code from sprint.
egzthunder1 recommended using PST programming but I am not sure what that means.
Jacob_newton said:
I am running NFSFan's WM6.5 rom and am having the same issue. I cannot activate my phone because it will not take the "##*****#" code from sprint.
egzthunder1 recommended using PST programming but I am not sure what that means.
Click to expand...
Click to collapse
If you are using NFS, you will find a folder under the Start Menu that is called Phone Codes. The dialer in NFS is skinned if memory serves me well, which means that the ##.. codes will not work.
ajones7279 said:
No wait don't do that yet. Try this. Put this program and .dll file on your phone, in my documents perhaps. Now run GetSPC, enter the ESN hex # with any letters in CAPS and hit "go" and it should give you the spc. Now hit "talk" and put in ##******# (****** being the 6 digit # u get from GetSPC) and then go to edit. U should be able to change them from there
Click to expand...
Click to collapse
When trying this, I get an error message that says that GetSPC.exe is not a valid Win32 application.
I have a TITA100(Quest) that I am unable to launch EPST.exe on. I need to enter in the SPC # that I generated, but when I tap it to launch it reads EPST at the top for a sec but never leaves the file browser. I have also tried ##778(#), but the phone dials to a quest message service that says I am unable to dial this number.
I want to configure it for cricket.
Here is what I have done so far.....
Started with: Radio v. 1.39.00, ROM V. 2.13.656.2, Bootloader 1.2
Went to bootloader 2.40(via Hard-SPL-MF.exe), Scrosler's Titan ROM 3.26 w/touchflow. and then Radio 3.42.30.
Thank you in advance for any suggestions or solutions.
I got it to work after doing the using reedit to dump the code into a text file. I am not sure if that activated something, but it worked.
upsett3r said:
I got it to work after doing the using reedit to dump the code into a text file. I am not sure if that activated something, but it worked.
Click to expand...
Click to collapse
can you plz explain in detail what you did? i'd like to get into EPST again, so i can deactivate the GPS... it's killing battery... thanks in advance
phattboy29 said:
can you plz explain in detail what you did? i'd like to get into EPST again, so i can deactivate the GPS... it's killing battery... thanks in advance
Click to expand...
Click to collapse
So go to settings then phone the location and turn it to 911 only, GPS is now off. I don't think there are any gps settings in EPST but I could be wrong. And I run GPS all the time and have no problems with my battery life. I think you have other issues.
i may be wrong, but my Quest XV6800 didn't have the EPST.exe executable in it's original ROM (it's also in the Windows directry). i believe i flashed it to Alltel's stock ROM to get to it, and reset the SPC to 000000's. i couldn't get it into debug mode with the Quest ROM either
i have flashed many Moguls and the Quest ones are always the most peculiar...
i can't get epst to launch. i tried repeatedly starting it, using ##778 AND EPST.EXE in \Windows. I then soft restarted two or three times, trying both methods after each boot.
Is there any way to fix this? Otherwise, is there another way to enter the A KEY? I'm gettin an auth error when making calls.
rom 4.1.2 radio 3.42.50 pri 1.35_002
Installed DCD Verizon Carrier Cab from http://dcd1182.n715dp.com/index.php?dir=carriers and that allowed me to launch EPST via both methods.
Did not eliminate the need for a new A KEY.
Still kinda learning this stuff, I flashed everything OK, and now the GPS works with Garmin XT. This is on a "practice" phone, one that was kind of beatup that I could practice on before I flash my actual phone. I couldn't get EPST to work till I loaded the Verizon cab described below. Question is, will I have to load this cab every time I flash a new ROM, or does it have more to do with flashing a different radio ROM?
This is a great forum, I've learned a lot, and still learning. Thanks everyone.
Dale.
Some roms are carrier specific and have the info included. Most roms state that installing the carrier cab is necessary. This allows the same rom for all titans and then the user just adds carrier info. Just read the rom instruction better next time. Most list if the cab is needed.
I just want to share my experience with you. I had to change my phone number thus required a PRL reprogram. Because I am running the latest NFSROM with WM6.5, the instructions from Bell (in Canada) would not work. Someone on this forum said that he had to revert to the original firmware from Bell and then flash back. However, I found the way to do it with out reverting back or even a hard reset:
-Run PST program under \Windows
-Choose edit and Enter your lock code (call MST). This should have been given to you on the Bell instruction. I heard the Verizon one is 000000. For Spring you can find the getpst program.
-Change the MSID to your new phone number on the default Display page.
-Change the Mobile Directory Number (MDN) on the NAM page to your new number as well.
-Make sure that all other relate fields i.e. MINs, MMC, MNC, NMSI, IMSI ... is correct. They should be changed automatically after you change the MSID and the MDN number.
-Quit the program. It will ask if you want to reset the phone. Say yes.
At this point, your phone should work. However, the aGPS might not be working. You will get fix via the internal GPS but it will take a long time because aGPS is not working properly. If this happen, install the Bell Carrier Cab here: http://forum.xda-developers.com/showthread.php?p=3680840#post3680840
I imaging the procedure is very similar on other carriers.
You are a life saver! THANK YOU!
Thread Moved to General since it isn't development.
Bell Carrier cab link is not working.
smaugmra said:
Bell Carrier cab link is not working.
Click to expand...
Click to collapse
Updated to the new FAQ post. Thanks for letting me know.
Hello,
My phone has 4 number security code you have to enter when the phone's being unlocked(did in settings, default winmo lock but HTC made an unlocking skin on it).
I've taken out a battery while the phone was on, then turned it back again in 3 hours. I move the unlock image, and as usual dialpad appears asking for security code. I enter as I usually do and it says INVALID CODE. I'm like - WTF? Tried again, nothing. Tried dozens of times, nothing. Reboot doesn't help. Now it even stopped saying INVALID CODE, when you press the unlock button it doesn't do anything.
I had the "lock" feature working fine for weeks.
QUESTION: What to do(without hardreset)? Phone is set to sync when USB connected, Windows Mobile Device Centre says unlock your phone first before sync. I can't do anything, can't make call(i can receive it), can't check messages or anything, i can't unlock it ffs! Help please, any ideas are welcome
you aren't alone,happened to quite a few.
did you recently install swype 3.9?(there are other reasons)
i've not seen anyone get out without hard resetting.
i have miri rom with swype pre installed
maybe there's a way to upload a file to storage card that will change some registry keys? problem will be how to run it
Sallcho said:
i have miri rom with swype pre installed
maybe there's a way to upload a file to storage card that will change some registry keys? problem will be how to run it
Click to expand...
Click to collapse
About the only thing I can think of is if you were able to find a way to put something in the \windows\startup folder that fixed it - but like someone here already said - odds are you're going to have to do a hard-reset.
@
It happened to me awhile back...i tried to find a way but didnt manage to find it, i had to hard reset..
I bought a HTC touch with Android on it off ebay for sprint. I did not even know that this phone did not come with android to show how little I know about phones... So I tried to activate it and that worked fine till I got to the part where you enter the ##nnnnnn# number to put in the msid. So ops it dont work. I dont even know how to get files on my phone, when I plu it in it does come up under ky computer. I can put stuff on the memory card but don't know how to use it under android. Some one told some else on this forum that you have to flash it back to windows change it and flash it back. there was another person that said to use a plrgram on the phone called get spc or something like that which I tried but I don't know how to get it from the memory card to the phone or how to run the program off the memroy card with android. I used Astro (don't enen know if that is what astro is for) and tried to launch the program in the phone and it said it didn't know what to do with and exe file. I am so stuck. Sorry to be such a pain.. Can any one help. All I really want to do is change the msid and that msn number or what ever that second number is called.
Thanks everyone.
Randy
Post screen shots+problem details
please
breife with details
Sprint are CDMA no? That means you have an Vogue, not an elf. Whilst your lucky you can have froyo, you have also ended up in the wrong section. Hopefully a mod will move this
Moved to Vogue section.
As for your problem, I personally don't know how to mess with programming settings on Android (I know it can be done via CDMA Workshop, but you need to get the program to do this and even still it isn't easy). Flash back to WM (look for NFSFan's rom, you should be able to flash with no issues as your phone is unlocked). Once you have flashed, you can easily do the PST programming from the Phone Codes folder. You can flash back to Android afterwards.
I hope this helps.