I have a G1, and I tried to get root. I downgraded to RC29, and then downloaded the recovery.img file and the Hard SPL, downloaded telnet and all that, then tried to flash the spl as update.zip to the phone using the recovery console (i think that's what it's called, i pressed home+power to get there). it keeps giving me an error message "E:No Signature (26 files) E:Verification failed". i tried to download another one, and it gave me the same message. i've been looking for a solution for six hours and nothing helped ;( anyone think they can help me?
Did you try editing the zip in any way? Did you extract it/etc? You need to take the downloaded zip, rename it update.zip, and put it on the sdcard. Do not change any files in it or extract it. Hell, don't even open it.
mattdeeeezy said:
it keeps giving me an error message "E:No Signature (26 files) E:Verification failed".
Click to expand...
Click to collapse
Doesn't sound like you're using the SPL update.zip. That updater only contains one file.
@gary13579 the only thing i did to the zip was rezip it, cos my mac automatically unarchives everything when i download it.
@jashu do you know anywhere i can get the SPL? i downloaded it from the post on this forum..
mattdeeeezy said:
@gary13579 the only thing i did to the zip was rezip it, cos my mac automatically unarchives everything when i download it.
Click to expand...
Click to collapse
That would be the problem. You're going to have to find a way to download it without unarchiving it.
There's a "signature" added to all updates, which tells the phone whether it's a legitimate update or not. When you re-archive it, it loses that signature.
So I have ROM Manager, which I use to boot into ClockWork to do all of my Nandroid backups. I have been customizing my Vibrant with success so far. I would like to try new customizations without waiting for Finals. So I now have a update.zip file located at /SDcard now to boot into ClockWork without having to do it through ROM Manager in case my phone does not boot.
Usually I have been renaming my customizations to update.zip and loading them from /SDcard. My question is how does one apply update.zip's without moving the ClockWork update.zip located at /SDcard? I have renamed my customizations to update.zip, moved them to a different folder name, booted into ClockWork with it's update.zip, and have tried applying the customization update.zip's that are located somewhere other than /SDcard with no success. So how does one apply customizations without moving the CloclWorks update.zip from /SDcard?
Thanks.
Place whatever you want to install someplace else with a different name. Then select install from SD (I think that's it, not sure) and navigate to the file. It works exactly perfectly.
Sent from my SGH-T959 using XDA App
Thats what I was trying to do, but it would just freeze at the screen saying something like "searching for the update" or something like that. Dont' remember what it said exactly, but I was doing it that way. Not sure why it wouldn't install though... Unless there is a link to an updated ClockWork update.zip file?
While trying to use ClockWorkMod to install a update.zip from SDCard it freezes at "Finding update package..."
Any thoughts?
Nevermind. It was a bad download or corrupt file... downloaded same file, and it loaded perfectly. Close or delete this thread, thanks.
Is it possible for someone to post the newest ROM upgrade with the extracted renamed nbh file? I don't readily have access to a computer, will be flashing from the micr sd card. Thanks!
Are you sure? If you flash a stock ROM via SD it will overwrite the SPL.. just fyi.
Yes...
Yes, my current ROM is giving me the fits, so thought for now, a stock version would have to suffice. Coupled with no computer access, my last choice seems to flash the latest TMOUS LEOIMG.nbh from the micro-sd card. Having trouble locating such a file...
Try downloading PocketRAR or even most file explorers (resco and I think TC) can extract zips.. then just extract the nbh and rename it leoimg.nbh. I would upload it for you but don't have the time right now.. sorry :/
Thanks...
I have tried installing PocketRAR to no avail. Resco file explorer can't seem to extract the necessary file(s). If there is someone out there that can provide some information on how to perform such action, or even post the correct LEOIMG.nbh file, it would be greatly appreciated.
Thank you!
I'm getting an error when I try to install a .zip file through CWM recovery.
I get an error saying : E: Can't Open /sdcard/x (No such file or directory exists).
I've looked around and have learned that my best bet is to format my SD card. I can do that just fine, but I don't want to lose my data. I'm not flashing a ROM, it's just a custom lockscreen clock. If I format, I'll have to redo everything and lose all my data, apps, and system files (I'm running CM7 off of my SD card). But I need that for my zip to even be worth it.
I'm running a nightly build. Is there any possibility/plausibility that this could be a ROM-specific bug?
Is there any advice as to what I should do?
Thanks in advance.
SacTappingUni said:
I'm getting an error when I try to install a .zip file through CWM recovery.
I get an error saying : E: Can't Open /sdcard/x (No such file or directory exists).
I've looked around and have learned that my best bet is to format my SD card. I can do that just fine, but I don't want to lose my data. I'm not flashing a ROM, it's just a custom lockscreen clock. If I format, I'll have to redo everything and lose all my data, apps, and system files (I'm running CM7 off of my SD card). But I need that for my zip to even be worth it.
I'm running a nightly build. Is there any possibility/plausibility that this could be a ROM-specific bug?
Is there any advice as to what I should do?
Thanks in advance.
Click to expand...
Click to collapse
If you are running CM7 on SD you do not flash zips to it with ordinary CWM. Ordinary CWM will flash things to emmc. But maybe that is what you are trying to do. You do not say what you have on emmc.
If you want to flash the zip to the SD installation, make sure the zip file starts with update- and put it in the boot partition just like you do for roms. Then boot to SD recovery and the script will install it to SD.
An alternate way to flash things to SD installed CM7 is to use a special CWM modified for use on SD installs. You can read about and get it by looking at my tips thread linked in my signature. Item B5.
If you want to flash to emmc, make sure you are using an ordinary SD to put the zip on. Ordinary CWM always looks for partition one on the sd for the zip file. On your CM7 SD, the file is on partition 4 so CWM cannot find it.
So I'm trying to flash a new clock for my NC's unlock screen. The zip is called HoneyCombClock.zip. So do I just rename it to update.zip? That's not going to mess anything up?
Also yes, I booted into boot menu and selected emmc recovery. I thought that I needed to do CWM recovery.
I'll try the proposed method when I get a confirmation that it's not going to mess up my NC.
SacTappingUni said:
So I'm trying to flash a new clock for my NC's unlock screen. The zip is called HoneyCombClock.zip. So do I just rename it to update.zip? That's not going to mess anything up?
Also yes, I booted into boot menu and selected emmc recovery. I thought that I needed to do CWM recovery.
I'll try the proposed method when I get a confirmation that it's not going to mess up my NC.
Click to expand...
Click to collapse
You need to find out if it is a flashable zip... or if it is an app that has been zipped... I'm betting on the latter.
SacTappingUni said:
So I'm trying to flash a new clock for my NC's unlock screen. The zip is called HoneyCombClock.zip. So do I just rename it to update.zip? That's not going to mess anything up?
Also yes, I booted into boot menu and selected emmc recovery. I thought that I needed to do CWM recovery.
I'll try the proposed method when I get a confirmation that it's not going to mess up my NC.
Click to expand...
Click to collapse
If it is a flashable zip like Dizzy pointed out, you should rename to update-HoneyCombClock.zip. But I agree with Dizzy that it is probably a zipped apk file, not a flashable zip. Try looking at it with a zip program and see what you get.
It is indeed a flashable zip. I extracted it to make sure.
Also, I'm curious as to what you (leapinlar) meant when you instructed me to put the zip in the boot partition. From what I understand, that's the root of the SD card, right? Or has it changed?
SacTappingUni said:
It is indeed a flashable zip. I extracted it to make sure.
Also, I'm curious as to what you (leapinlar) meant when you instructed me to put the zip in the boot partition. From what I understand, that's the root of the SD card, right? Or has it changed?
Click to expand...
Click to collapse
Yes, it is what shows up on your PC when you take the card out of the nook and put it in the PC. Copy the zip there, rename it like I suggested above, put back in nook. When booting hold the n key until the boot menu comes up. Select SD and recovery and finish booting. The recovery script will install the zip.
I'm doing it and I'm not getting any errors, but when I boot into recovery, it runs through and shuts down without installing the zip. I don't understand what I could be doing wrong.
SacTappingUni said:
I'm doing it and I'm not getting any errors, but when I boot into recovery, it runs through and shuts down without installing the zip. I don't understand what I could be doing wrong.
Click to expand...
Click to collapse
And you renamed it like I said with update- on the front? (Don't forget the dash and no spaces.)
The file name is "update-HoneyCombClock". That should work right?
Sorry about these extended questions.
SacTappingUni said:
The file name is "update-HoneyCombClock". That should work right?
Sorry about these extended questions.
Click to expand...
Click to collapse
and .zip at the end?
It's automatically recognized as a zip file. If I put .zip at the end, it will show up on my tablet as "update-HoneyCombClock.zip.zip" Nevertheless, I'll try it and see what I get. I'll laugh if it works.
SacTappingUni said:
It's automatically recognized as a zip file. If I put .zip at the end, it will show up on my tablet as "update-HoneyCombClock.zip.zip" Nevertheless, I'll try it and see what I get. I'll laugh if it works.
Click to expand...
Click to collapse
Even if you get it flashing with your SD setup... it may not work if it requires honeycomb and you're running gingerbread.
It's meant for cm7. Here's a link to the thread I got the zip from: http://forum.xda-developers.com/showthread.php?t=959602
SacTappingUni said:
It's automatically recognized as a zip file. If I put .zip at the end, it will show up on my tablet as "update-HoneyCombClock.zip.zip" Nevertheless, I'll try it and see what I get. I'll laugh if it works.
Click to expand...
Click to collapse
What does the script say when it boots to SD recovery? Does it say install zip not found? And when you take it back out and look at it in the PC, is it still there? If it installed, the script will remove it. I know you can have your PC set to not show known extensions so it looks like it is missing. Temporarily disable that so you can really see the name. The script requires that it be named precisely, update- at the beginning, .zip at the end and no spaces.
The script doesn't mention any .zip installation. The zip file stays on my sd card root after recovery.
I just set my computer to show extensions. I'll retry the installation and make sure that every detail is perfect.
I remember doing something similar when I flashed a nightly on my nook. It was a .zip file. It wasn't flashing, so I looked around and got the impression that it would only instal if it had "update-" at the beginning. So I renamed it and it installed. I don't know what's up with my NC now. Is there any possibility that this could be a bug with the nightly? Or are installations not affected by ROM's.
SacTappingUni said:
The script doesn't mention any .zip installation. The zip file stays on my sd card root after recovery.
I just set my computer to show extensions. I'll retry the installation and make sure that every detail is perfect.
I remember doing something similar when I flashed a nightly on my nook. It was a .zip file. It wasn't flashing, so I looked around and got the impression that it would only instal if it had "update-" at the beginning. So I renamed it and it installed. I don't know what's up with my NC now. Is there any possibility that this could be a bug with the nightly? Or are installations not affected by ROM's.
Click to expand...
Click to collapse
No the existing rom will make no difference. It could be the zip itself. It has to be structured like a rom zip. It needs a /system directory with the files you want to flash. And it needs a META-INF folder with the script file buried in it. Where did you get the zip? Maybe I could look at it for you.
EDIT: I just downloaded and looked at it. It is just adding a single font to your /fonts folder. Nothing else. You can do that manually with root explorer. Just extract the font from the zip and copy to /system/fonts.
I got the zip from here: http://forum.xda-developers.com/showthread.php?t=959602
The clock can be flashed on any device with the following zip in recovery just like before.
http://www.mediafire.com/?b6xpw0pda671ujm
Click to expand...
Click to collapse
The zip has a font file and a meta-inf folder.
Look at my edit above
I replaced the file, but now I'm in an infinite bootloop.It just keeps doing the skateboarding android animation. Please tell me this isn't a problem with permissions. I don't know if I can even edit permissions now.
Kinda makes this noob sick. I just got a new Moto G4 X1625 (not Amazon). Next came the steps to unlock the bootloader with Motorola and to install TWRP. Everything had gone so easily by following some how-to steps I jumped to the next step of installing SuperSU without doing a backup – thinking it was simply adding an app. Big mistake! Reboot and now always stuck on the logo boot animation.
Okay, so I found and tried use TWRP to install ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml.zip in an attempt to get back to stock. No luck there since install always aborts with a "Could not find 'META-INF/com/google/android/update-binary' in the zip file."
I checked a couple of other ROMs and that META-INF directory doesn't seem to be included in them either.
What do I need to do just to get back to normal eliminating the effects of that SuperSU install? Help greatly appreciated.
That file you downloaded is not a flashable file.
Instead, read this linky
Thanks for the helpful clue @t0mm13b. I followed the approach at <http://www.stechguide.com/download-stock-firmware-of-moto-g4-and-g4-plus/> and executed the listed commands from my MacOS Terminal. They did the job resulting in a fresh install after bootup.
2-1/2 questions…
1. Are flashable ROM files readily available? The ones I found all seemed missing the META-INF directory. Will they be .img files and not .zip?
2. Is TWRP not useful for these stock ROMs?
The ones I found all seemed missing the META-INF directory. Will they be .img files and not .zip?
Click to expand...
Click to collapse
As a general rule of thumb, read the accompanying text to the link of the download, on a web page where you find one. It will tell you if it's flashable or not.
Factory images, just like what you had to carry out previously, never have, and do not have the `META-INF` directory. They usually contain img files that requires `fastboot flash`.
On the other hand, OTAs and flashable zips will have that in their respective zip file.
Thanks again @t0mm13b for the clarification. I often didn't see info about whether a ROM is flashable in link or web page text, but it may have just been assumed based on being aware of what the zip contains.