HELP!! buttons not working - Touch CDMA General

Today I noticed my hardware buttons aren't working(camera,red,green). I can't figure it out and it's making it super hard to use my phone. The lights on the buttons are also on full time. I can't do a hard reset because my buttons aren't working. Ive also tried installing other roms but i keep getting error 262 in the rom installer. Please help me guys.

Ok, I couldn't hard reset the phone, but I was able to reinstalled the bell 6.1 rom. THIS DID NOT SOLVE THE PROBLEM. The lights on the buttons are still permenently lit, even if the phone is turned off. The red, green, camera buttoms DONT work. Please help me. I've tried leaving the battery out for 20 mins as well as countless soft resets

Same problem
I have the same issue, but my lights aren't staying on. the phone will sit there and i can turn it on, then i can't turn it off or use the hardware buttons. I'm curious as to what you have installed on the phone. I had an issue with the hard lights staying when i used google latitude in their maps application.

Do you have the new version of Skype installed? Vers. 3?

Related

Unintentional turn-on in the Jamin?

I've tried to do a search on this problem, but nothing came up. Maybe I'm searching the wrong keyword. If someone know anything about this, please advise. I got the Jamin recently, I pretty much went right into installing the 2nd ROM (vs the recent 3rd ROM). So I have nothing to compare to. For whatever reason, my Jamin keeps turning on by itself every few minutes. Not only that, it won't automatically turn off using the Power setting. Whenever it's time to turn off (ie, after 1min), the thing automatically turns on again (with the backlight on). I'm not sure if this is a ROM problem, a hardware problem, or software imcompatibility. Please help.
Hey
I've also had this happen on my Prophet - it seemed to fix itself after a while, but I also had the problem:
press power button to turn off
press power button to turn on, and backlight was off
couldn't get the backlight on again except going through the backlight settings!
I did fix this using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
Run this app on your prophet, and your backlight is back to normal.
I've found this problem in a number of threads - I'm updating them as I find the solution!
--Tosh

At times Backlight doesnt light up again - why?

Perhaps someone has an explanation why my backlight doesnt light up again when a button is pressed?
From time to time, the backlight goes dark and even though I am pressing buttons, screen, power button, etc, the backlight doesnt come back on. I have to search for the backlight adjuster (in the dark) in order to switch the light back on.
I have wisbar advanced and SpbPocketPlus installed - might that effect this somehow??
Thanks for any advice!
i have exactly the same problem and donĀ“t know a solution. ;-(
Wisbar Advance 2.6.0.1 is installed, SpbPocketPlus not.
I think it comes more often if i use the camera, but it is not reproduceable...
I've never had this problem before, I dont have wisbar installed.
You may be doing a press and hold function on your device. Quick press of the power turns it off, a long press turns off the backlight. the only way to turn it back on is to long press the power button.
also you have settings that turns the back light screen off, which may be affecting this.
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Squuiid said:
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Click to expand...
Click to collapse
It hasnt happened lately (actually ever I posted this thread strangely enough) but its quite embarrassing when you have to find your way through a dark screen.
I put a large symbol of the brightness adjuster in one corner (using SpbPocketPlus), so I only have to find that symbol rather then start --> settings --> etc..... its not a cure but it makes it easier switching it back on.
If anyone has a remedy for this problem, please share...
Not sure why this happens, but I fixed it using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
This app - run on your prophet, and all is back to normal. Keep a copy on your SD card...
--Tosh
didn't help
I tried and still use the neo backlight fix. But this fix is only for forcing via startup a longer measured time for the light to stay on.
I too have suffered with the problem of the backlight not coming on every now and again after starting up the prophet. I've had this problem on numerous roms too which is interesting. What more interesting is that even in the days of my owning a Blue Angel (Orange M2000, MDA) I STILL remember having this intermittent problem with the light not always coming on. Only way I fixed it was to simply soft reset the device. Whenever I did that and when I do it now, it stops it happening for week or so at least.
I still use the neo back light fix too as my phone has the quick light turn off problem without it. Neo certainly created a good fix no mistaking.
All the best
Nicholas
i had the same problem...just put the same value to the standby and backlight ...( both 3 mins on mine)...and never happened again....i think it helps...
I have a strange backlight & power-off problem on my Qtek S200:
When the backlight is switched on and I press the Power button shortly to switch it to sleep mode, the screen gets blank but the backlight does not go off.
So now I wait first when the backlight timer goes off before switching the device to sleep mode manually.
Another problem:
When the power settings is set to switch the device off automatically, it reboots when the timer goes off. So my solution is to disable the auto power-off feature.
How to fix this to the original behaviour ?
I tried the neo_backlight_fix and set the backlight timeout to the same value as the standby timeout, but with no avail.
My Qtek S200 has still the original old ROM (G4 model) and Windows Mobile 5.0:
ROM version info:
IPL: 2.10.001
SPL: 2.10.001
GSM: 02.07.20
OS: 2.10.7.25
Please help me to solve the problem.
Maybe I messed up a lot and the only solution is to install a newer ROM which is available since some time at qtek.nl.
Thanks in advance.

flash led problem... help me8

since a few days i've been trying to install some software on my wizard to use the led as a flashlight without using the camera mode. Though these applications did not work suddenly for some reasen my led's light turned on and I can't turn it off again. Even after a hard reset the thing is still burning and sucking my battery dry...
Only way i found so far to shut it down is to open the camera program, turn on the led (then it goes brighter) and turn it back off again. After a few seconds it just turns on again tough.
please someone help me!!!???

Backlight dims, power button doesn't work properly...

I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
pdiaz said:
I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
Click to expand...
Click to collapse
Sounds like it's going all haywire. If you've had it less than a year, I'd send it in real quick. Sounds more like a hardware problem.
I don't think it is hardware as a hard reset fixes it...it just recurs down the track. I have done a hardrest and reinstalled all my apps and it is working great again but I was wondering if I should be checking somewhere in the registry for an aberrant setting. I am u using a backup image program so at least when it happen again I an restore my system more simply.
But then again, all the symptoms you mentioned point to a hardware defect. You could try to find a tweak, but like all electronic devices, it's the luck of the draw. Try emailing HTC and see what they say.

[Q] hd2 hardware button light stuck on

so I just noticed the lights for my hardware buttons are stuck on, happens from the moment the phone turns on, and nothing changes it (though they seem to dim slightly) I've tried reflashing the phone (using mdj cyanogen 2.7, nand with magldr 1.12)
I tried searching and havent seen anything like this. Only thing I can think is maybe it got a little wet(?) while I was recording video during a snow storm here, but nothing else seemed wrong, just got home and noticed it. Any ideas?
I have the exact same problem. I've flashed back to the original windows mobile rom and the problem is still there! I've searched and yet to find the solution. Anyone got any ideas?
Check to see if you have a voicemail - you may have read it but closed VM before listening to all the message, it can on occasions do this - it I'm right just ring your phone leave a fresh VM then go into VM and listen to the whole message
Thanks for the reply, but no dice on this one. I tried the voicemail thing and I have no voicemails.
To clarify it's the bottom 5 buttons (call, home, windows, back and power) that are constantly lit up. Even when the phone goes on standby those buttons stay lit. I'm looking to see if there's an app that can just shut them off.
I got the same problem. My hd2 got some water on it and the problem started. The hardware keys now getting dim but not getting completely off. There is no other problem
Please help.
same problem on my father htc click
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
johnerz said:
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
Click to expand...
Click to collapse
Thanks, I will try the rom.
But do u really think its a rom problem ? The keys light were working fine before the water hazard in the same existing rom. Besides the problem is also there when u are in the boot menu of MAGLDR or Clockwork menu.
any updates from anyone? On miy HD2 the vol up, start, back & end call key don't respond to any presses but seem to be active. Calls will randomly end, vol up acts as if the button is kept pressed!
Help!
Hi guys,
A little bump in this thread, but is there already found a solution for this problem?
After a hard reset and replacing the digitizer of my htc HD2, the buttonlights remain on. Even when the phone gets in standby mode.
I'm using cyanogenmod 7. (bought it like this. Didn't put android on it myself)
After the hard reset and digitizer replacement there also came another problem.
When pushing the windows logo (key 158) the volume up button also reacts (key 115). Thesame problem occurs when pushing the dial button. With that key (231), key 114 (volume down) reacts.
So when i want to open a menu or make a call the volume goes up or down.
Do you guys think I screwed something up when replacing my digitizer or is it just an software issue caused by the hard reset?
All right guys, it was an hardware failure.
I reopened my htc and checked all the connectors and (re)placed some of the yellow tape. After the reassembly, my phone just works as it should. All problems are solved.
My HTC HD2 also got the keys stuck after only a week of use. T-Mobile is sending me a replacement phone today.
Is this a common problem? I'm afraid it may happen again.
Hey guys I'm having same issue. Going to try opening up and check connectors.

Categories

Resources