blue tooth headset mic volume to quiet - Touch Diamond, MDA Compact IV Themes and Apps

Hi everyone,
I tried a few bt headsets for my diamond, but every of them had the same problem. (The best, but also not satisfing headset was the jabra bt 135)
In every tested headset I nearly had to shout in the mic to make the caller understand me.
Calling someone with wired headset delivered with diamond is no problem the build in mic is also working fine.
Is there any app or reg key to increase mic volume for a bt headset?
Or any suggestion which model I have to use?
Thanks for your help.

Related

Atom's Bluetooth Functionalities

I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Anyone, please?
I use the iTech S35 and STEREO works like a charm with the Atom. I get stereo mp3 and movies. The handsfree works too although the voice dial doesn't cos the long press to activate the voice dial uses the button to turn the iTech on and off so u will end up turning the iTech off.
not heard of the iTech powBOX so dun know how it compares but I assume it should work too.
i think it used to work in older ROM version... could it be the new ROM?
I use Samsung Bluetooth SBH100 as a stereo headset with Atom (latest ROM) - got no problems. Headset's remote control buttons for audio player works too. Short press of Phone button make a redial. 4 sec press should activate voice dail (on 'supported devices'), but make nothing (common problem).
can the SBH100 play radio?
touraco said:
can the SBH100 play radio?
Click to expand...
Click to collapse
Don't think so as Atom requires the ear piece to be plugin as antenna...
I am using Bluetake Iphono BT stereo headset on Atom. It can listen to the music and act as handsfree for calls seperately but couldn't do both at the same time, the headset will switch off whenever there is incoming call while playing music, i guess there's some problem on switching btw.
Anyone got the same problem??
can't listen to music but can make calls
Hi,
I'm kind of new here, as I just bought a used atom from that e*** auction site. it works great, except i can't get my bluetooth headset to work as a headphone while listening to podcast, mp3's, etc. using my BT headset to make calls works fine. I have both a Jabra BT130 and BT350 and both have this problem. is it the headset? if so, is there a list somewhere that lists what BT headset is compatible? i really need it to work as I cannot stand using wired headsets since by the time i untangle those wires, I'm out of time already...
thanks a lot!
It's the New Rom..(i think)
Knightro said:
I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Click to expand...
Click to collapse
the problem comes with the new rom i think.. i had a bluetooth headset that worked perfectly before i uograded to the new Roms released by O2 itself.. i emailed them about the problem but they insist that nothing is wrong with the ROMs they made...

TyTN II and the Jabra 320s Stereo BT Headset

Well, just got my TyTN II. For me it is worth the upgrade from the TyTN.
I have only one issue. My Jabra 320s headset is about 30% lower in recieving volume than it is on my TyTN I. On the original TyTN, the volume was just about right, any lower and it wouldn't be usable, but now that I am running it on the TyTN II it is un-usable at such a low volume.
My question is this?
Is this issue fixable through software/registry etc...
And does anyone have any idea how I can fix this?
JB
That's the big question, low BT headset volume when calling is a consistant issue with most headsets on Kaiser vs Hermes. Time to email HTC support, it's a bug.
lol no problems here. Using Plantronics Voyager 510SL.
Even if it's a bug with the Kaiser, (Probably software) we won't see any fix from HTC anytime soon. That's why I am asking the pros over here at XDA if there is a software/config workaround/fix that can be implemented.
JB
nuclear said:
lol no problems here. Using Plantronics Voyager 510SL.
Click to expand...
Click to collapse
ditto... while i'm not using the 510SL, i am using the 510 and it's quite loud with my Kaiser..
I found my problem and fixed it...
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Buzz313th said:
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
Click to expand...
Click to collapse
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
Yes.. I had the same problem...
This may sound rediculous on how I fixed it, but it worked.
I paired my laptop and the Headset and then tried to listen to stereo music, and also paired the phone with the laptop and then it would pair correctly with the Jabra bt320s.
It seems to me that the kaiser has a few BT bugs that need to be worked out, and that different pairings will change either reg settings or configs that arent available to the UI...
JB
RemE said:
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
Click to expand...
Click to collapse
]
You are correct and I am still having low BT call volume, but at the time I was having low BT stereo volume as well. The sliders fixed the stereo problem, but didn't fix the BT call volume.
I haven't tried the fix yet, but I believe someone claims to have fixed the BT call volume with a cooked rom or a modified rom...
I'm not worried that we will have this fixed sometime soon.
JB
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
jspohn said:
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
Click to expand...
Click to collapse
I bought a plantronics pulsar 260 and that one works too. In the shop they told me that jabra has much problems with their bluetooth headsets!
pepeto2001 said:
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
Click to expand...
Click to collapse
I don't really have any idea, since I charge it nightly. I normally leave the BT on all the time anyway.
Strange problem with handsfree mode
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
HasC said:
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
Click to expand...
Click to collapse
Did you solve this problem, I just bought the 320s and am experiencing the same issue?

Bluetooth during incoming call ?

Hi,
After a long time i have restarted to use bluetooth headset and i have to travel to work .
Just one question to experts.
During incoming call i hear a ringtone in my bluetooth headset and handset but when i answer the call the conversation works only in the handset. I have to select handsfree mode after i answer the call to talk through the bluetooth headset.
Is there a way to make bluetooth work first, instead of having to transfer the call to the headset ?
Edit :I am using WM6.5 rom and nokia hb 103 bluetooth stereo headset
I thought i found something but i was wrong.
A bump to get some notice

[Q] Problems with BT headset - SMS sound only in headset

Hey guys,
after a few days testing the BT headset connection in all different versions, i cannot get the LG to play the SMS sound from the device when my headset is connected. It plays the SMS sound only in the headset.
Phone calls are correct... the device rings and the headset makes it's typical sound.
I have a Jabra headset and it worked well with my HD2.
Can someone confirm this?
Any ideas how to solve this?

[Q] A2DP Bluetooth headset microphone

I have connected an A2DP platronics bluetooth headset to my WM6.5 device. I then set the Stereo profile.
All the sound played is routed to the headsets speaker fine.
My tests confirmed that the microphone works fine in phone calls made with the device. However, the microphone is not seen as a Windows microphone.
So using sound recorder and other voice applications are not using the headsets microphone but are use the handsets one.
Can this issue be resolved?

Categories

Resources