Database Users

App2SD - cyanogen

not sure if this has been answered yet as I don't think I can search in this app, but is there a way to enable app2sd on cyanogen 5.0.5.3?

Yes, under applications.

it's greyed out for me.

Is your sd card partitioned?

jerrycycle said:
Is your sd card partitioned?
Click to expand...
Click to collapse
...probably not. I'm assuming if it isn't there isn't an easy way to do so and keep my data?. .. or is there? .

Use recovery 1.7 cyanogen version to make a ext2 partition then upgrade it from ext2 to ext3 to ext4. Mount your sd card and back it up before wiping it.
1 Install recovery 1.7 cyanogen
2 Boot into recovery
3 select patition sd card option
4 select partition sd
5 choose 0 for swap 1 to 2 gigs for ext2 and the rest will be fat32.
5 once that is done go back into patition sd card options and select ext2 to ext3 then after thats done select ext3 to ext4.
Hope this helps
shep

shep211 said:
Use recovery 1.7 cyanogen version
...
1 Install recovery 1.7 cyanogen
Click to expand...
Click to collapse
Cyanogen did not write this recovery tool; Amon_RA created a CM-based theme for it as it was heavily requested. He also added in support for Soyars' Apps2SD implementation (what you are giving a how-to for).
You actually do not need to change ext types for this to work. For testing purposes, I left it as the stock ext partition type created by 1.7 and apps2sd works beautifully.

shep211 said:
Use recovery 1.7 cyanogen version to make a ext2 partition then upgrade it from ext2 to ext3 to ext4. Mount your sd card and back it up before wiping it.
1 Install recovery 1.7 cyanogen
2 Boot into recovery
3 select patition sd card option
4 select partition sd
5 choose 0 for swap 1 to 2 gigs for ext2 and the rest will be fat32.
5 once that is done go back into patition sd card options and select ext2 to ext3 then after thats done select ext3 to ext4.
Hope this helps
shep
Click to expand...
Click to collapse
thanks heaps

deprecate said:
Cyanogen did not write this recovery tool; Amon_RA created a CM-based theme for it as it was heavily requested. He also added in support for Soyars' Apps2SD implementation (what you are giving a how-to for).
You actually do not need to change ext types for this to work. For testing purposes, I left it as the stock ext partition type created by 1.7 and apps2sd works beautifully.
Click to expand...
Click to collapse
I never said it was made by Cyanogen. I know Amon_RA made it.

edit: deleted content, not important.

how can you revert the partition on the sd card?
i want to have the full space on my sd card just as it came from stock.

edit: deleted content, not important.

edit: deleted content, not important.

edit: deleted content, not important.

edit: deleted content, not important.

So that didn't seem to work.
I tried without the updating of ext3 and ext4 and no dice.
I finally SEEMED to have gotten it to work. I did the partition of:
SWAP 0
EXT2 2048
REMAINDER
Anyways, I did this WITHOUT the ext3 and ext4 updates. When I went into the OS, the App2SD is enabled and the SD card mounts fine.
Hopefully this will continue to work. Any1 know what the problems are without updating to ext4?

edit: deleted content, not important.

tonnic said:
well that didn't work well. my phone became unresponsive and then the screen wouldn't come on.
Click to expand...
Click to collapse
jesus i hope its fixed..
A REALLY EASY WAY TO PARTITION YOUR MEMORY CARD IS AS FOLLOWS...
back-up your card
download Clockwork Recovery MOD from the market
buy the pro version because this guy is a genius*
+you might have to in order to partition idk
click partition memory card (something like that)
i clicked 512MB then 256MB for the second option.
works amazingly

tonnic said:
well that didn't work well. my phone became unresponsive and then the screen wouldn't come on.
Click to expand...
Click to collapse
Do you have a linux distro handy?
if so, you can use Gparted to create the partitions. You might need a microSD adapter though, as it seems to have trouble finding the mount point if it is in the phone.

edit: deleted content, not important.

Move data to SD card in CM7

I had repartition my SD card for a while, and I never checked my 512M ext3 partiton since I rarely do anything with it. Recently I mounted it and check, nothing store in it, all app go to .android_secure in my Fat32 partition.
I'm using CM7, is there any extra step to get app install goes to ext3 partition, or I should delete the ext3 and resize fat32 partition ?
Edit: as I search around, CM7 using Froyo App2SD ? Maybe I should install Darktremor App2SD or not ? Is there any extra step to install it on Wildfire

You are right. Flash DTApps2SD.

when I install darktremor, will it move all app to ext3 or I have to do something with it ?
Thanks for your answer, maybe I'll install darktremor app2sd now

I installed DTApp2SD anh successfully moved dalvik-cache to ext partition, but .android_secure still there.
When I run a2sd reinstall, next time the phone will never load, stuck at HBOOT boot screen.

Installed APP2SD, what's next?

Hi, I have installed APP2SD following this guide : here
I have partitioned my SD card with FAT32 and 500mb of EXT3.
What's next? How do i start using the memory? How to install apps to SD/move apps to SD?
Thanks,
Povo.

Just read carefully the thread.
You just install apps and see with TitaniumBackup if your ext partition decreased size. Internal memory will be used too, but in small amounts. There is also this link about dalvick cache.

When I install apps, the phone memory decreases, ext3 partition stays the same in TitaniumBackup.
Maybe it should be ext2 not ext3?

Well, I have ext3 and works fine. There should be something else. Try again with the one that moves dalvick cache

I decided to just install the 2.2 Custom ROM, works great! Thanks for the help

Transition from DT a2sd to S2E

The question: can I transition from DT a2sd to S2e without pulling back/reinstalling my apps that are on the ext3 partition? I don't have enough memory to pull them back from the ext3, so will I need to backup and then restore them via Ti, or will S2E find what's already there?

cHarley04 said:
The question: can I transition from DT a2sd to S2e without pulling back/reinstalling my apps that are on the ext3 partition? I don't have enough memory to pull them back from the ext3, so will I need to backup and then restore them via Ti, or will S2E find what's already there?
Click to expand...
Click to collapse
Its recommended that you remove a2sd scripts before using S2E. But the only way to find out if it will interfere is to try it. Your safest bet is to just back up all your apps with Titanium, uninstall all your apps (or atleast enough of them), turn off DT (or just reflash your rom), install S2E, check applications box in S2E, and then reboot your phone. Then restore your Titanium Backup with Data.

OK, that's about what I figured would be the case and it's just a bit of extra time.
Thanks

cHarley04 said:
OK, that's about what I figured would be the case and it's just a bit of extra time.
Thanks
Click to expand...
Click to collapse
yea but the great part is that, unlike DT, s2e will persist through flashing a new rom (with the exception of a factory reset).

What kind of results did you get with this? I have a ext4 partition, and I am looking to migrate to s2e, and I do not have room to move all the apps back to internal storage..

eagle0042 said:
What kind of results did you get with this? I have a ext4 partition, and I am looking to migrate to s2e, and I do not have room to move all the apps back to internal storage..
Click to expand...
Click to collapse
Be forewarned, I could not get s2e to work with an ext4 partition. BUT, if I formatted to ext3 and then used s2e to mount the ext3 as ext4 the partition shows up as ext4. Even when I put the sd into my Ubuntu laptop. It just lacks the journaling feature.
What you could try if the ext4 doesn't work is copying the contents if your ext to your computer, reformat to ext3, put the copy back onto the ext and then use s2e to mount as ext4.
Sent from my cm7 Aria.

Not enough memory to install anything

Hi,
Short / long story:
I have long time unused HTC HD2.
With Android (NexusHD2-KitKat-CM11.0_V4.5.zip is the file which I found in backup, so I assume this is what I install - sorry, it was long time ago.
Some time ago I need microSD card so I took it from my HD2, I did backup only windows FAT32 partition.
Now, I need to run my HD2 , I have install microSD 2 GB (800 MB FAT32 + 1GB Ext4) but is not working correctly.
It starting I can install Teamviewer, but when I need to install HTC module for teamviewer it's telling me that is not enough storage.
Quite often is restarting and after restart not keeping any settings (wi-fi) app installed (teamviewer) it's resetting each time to factory settings.
In Settings - Storage shows 'Total space' - Available 0.00 bytes
I did what is instructed on this webpage but it didn't help http://android.stackexchange.com/qu...mory-in-android-nand-roms-cannot-install-apps
Can anybody advise me which is the easiest way to make my HD2 working properly? Means have enough memory to do anything.
The purpose of restoring my HD2 is working as a router, tethering machine. I need to share internet from mobile network for smart TV and Tablet over wi-fi. It will be unattended so I need remote control access (team viewer host).
I'm open for a suggestion of changing the ROM if there is something reasonable easy and described (as I'm not big ROM expert). i've seen a ROM list for HD2, is too long.
Thanks in advance for your help.

it sounds like you are missing a data partition, perhaps the sdcard you used before had an ext4 partition which your new one does not have. Use recovery, in nand, to create an ext4 partition, then boot into rom, might work.

Robbie P said:
it sounds like you are missing a data partition, perhaps the sdcard you used before had an ext4 partition which your new one does not have. Use recovery, in nand, to create an ext4 partition, then boot into rom, might work.
Click to expand...
Click to collapse
Hi,
Thanks for your reply.
I did Ext4 by MiniTool Partition under Windows primarily.
And later in recovery, I have setup 1024MB and swap = 0 M.
It didn't help.
Should I mount it or so?
Update:
I have a look in log in nand - recovery and it's says that my second partition is Ext3 not Ext4.
And there is no way to change it.

What is your nand recovery? version?
Clk or magldr?
The recovery might say ext3 when it means ext4, but it does not seem right.

Robbie P said:
What is your nand recovery? version?
Clk or magldr?
The recovery might say ext3 when it means ext4, but it does not seem right.
Click to expand...
Click to collapse
It says on the top bar screen 'CWM-based on Recovery v5.0.2.6' but was install with ROM so should be fine.

try using the recovery to format the ext partition to ext2 or 3 then use it again to ext4

Robbie P said:
try using the recovery to format the ext partition to ext2 or 3 then use it again to ext4
Click to expand...
Click to collapse
As I said, I have created and formatted partitions under windows FAT32 & Ext4 and then under recovery, there was no choice of the file system file, I can only choose the size. And it was formatted to Ext3 - log saying.

badzi0r said:
As I said, I have created and formatted partitions under windows FAT32 & Ext4 and then under recovery, there was no choice of the file system file, I can only choose the size. And it was formatted to Ext3 - log saying.
Click to expand...
Click to collapse
Here's the solution:
http://forum.xda-developers.com/showpost.php?p=38956440&postcount=4
Thank you