Related
Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!
a piece of black tape perhaps?
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________
I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom
So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?
Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..
Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?
Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!
Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..
Why not just place it face down on your dresser at night?
this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly
I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool
enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on
my wizard won't boot
My wizard isn't going past the WM6 splash screeen, it gets stuck on it. I've tried soft and hard reseting a number of times as well as removing and reinserting the battery but nothing helps...
I recently flashed it with Blackdiamond 2.0 and have been using it without a single problem for the last 2 weeks or so.
Last thing I did on it last night was to use the 'Advanced Settings' in the settings menu and checked the options to make the scroll bars thinner and the scroll buttons smaller, it asked for a soft reset but since I was using it at the moment I clicked no and continued using it eventually powering it off and went to bed.
Now when I turned it on this morning it just won't go beyond the blackdiamond splash screen (pic attached)
I can't flash the rom again since activesync can't establish a connection with it(doesn't recognize that its attached with the pc, probably because the ROM never loads). I really don't know what to do... any help would be greatly appreciated
thanx
Check XDA-Wiki (top of this page) for troubleshooting guide under Wizard section
I'm not sure what is wrong with it, but it started because...I was trying to turn the bluetooth on and it wouldn't let me, so I did a soft reset, and what happens is it will just go to the loading screen for windows and stay there forever! I don't understand what happened . I've tried to reset a couple more times but it won't work...and also the power button on top doesn't work anymore.
Can anyone help me?
problem solved thanks
I just can't understand why people find more comfort in asking a question than doing a simple search and find the answer by himself. It's less time consuming and you feel a bit proud that you solved your problem on your own.
I think we should make a sticky with things like this :
"My wizard won't boot !"
"Which is the best rom ?"
"Will WM6 work on my device ? and where to find it ?"
All questions above have been asked hundreds of times, perhaps more and are still asked by almost every new guy that just registered.
how did you resolve your problem? I don't see troubleshooting anywhere...unless I"m very blind or maybe dumb.
monicaha said:
how did you resolve your problem? I don't see troubleshooting anywhere...unless I"m very blind or maybe dumb.
Click to expand...
Click to collapse
You got 2 choices :
- flash a new rom (put it into bootloader and connect it to the PC then flash)
- hard reset
anichillus said:
I just can't understand why people find more comfort in asking a question than doing a simple search and find the answer by himself. It's less time consuming and you feel a bit proud that you solved your problem on your own.
I think we should make a sticky with things like this :
"My wizard won't boot !"
"Which is the best rom ?"
"Will WM6 work on my device ? and where to find it ?"
All questions above have been asked hundreds of times, perhaps more and are still asked by almost every new guy that just registered.
Click to expand...
Click to collapse
The world is turning this way - wrong way. Too much lazzy people, too less macgyver thinking ...
anichillus said:
I just can't understand why people find more comfort in asking a question than doing a simple search and find the answer by himself. It's less time consuming and you feel a bit proud that you solved your problem on your own.
I think we should make a sticky with things like this :
"My wizard won't boot !"
"Which is the best rom ?"
"Will WM6 work on my device ? and where to find it ?"
All questions above have been asked hundreds of times, perhaps more and are still asked by almost every new guy that just registered.
Click to expand...
Click to collapse
You missed one:
Do I have a G3 or G4?
anichillus said:
You got 2 choices :
- flash a new rom (put it into bootloader and connect it to the PC then flash)
- hard reset
Click to expand...
Click to collapse
I was hoping I wouldn't have to do that, but I will try it later.
Thanks though!
jacknjill said:
You missed one:
Do I have a G3 or G4?
Click to expand...
Click to collapse
Hehe, I missed allot more
Like i said it before, why wait for an answer when you can find it for yourself. Maybe i just don't like to wait
P.S. I liked the MacGyver thing. I must admit i watched those series and i was really jealous on the guy...he knew too much
My Wizard was dead unlimited times.........,
it is easy to get life back, isn't it ?
WTF is wrong with u guys?? If its dead is dead. If the screen works, led works, the pda isnt dead. So hard to understand??
hi all,
I've a problem with my htc touch, it doesn't won't to start !
everytime i turn it on it turns off right before the HTC welcome screen comes !
any idea what is that ? or how can i flash another rom ?
*it's fully charged
*my rom is Touch_of HD lite 3.0
Thanks
Hi,
Did you flash a new rom or something recently? How old is your battery? If possible....try changing the battery and giving it another shot.
it's a new battery about 2 months or something
yes this is a new rom i flashed it yesterday !
Thanks for your quick response
[email protected] said:
it's a new battery about 2 months or something
yes this is a new rom i flashed it yesterday !
Thanks for your quick response
Click to expand...
Click to collapse
Hmmm...there you go. That seems to be the problem. Perhaps you'd want to go back to the thread from where you downloaded the rom and check to see if anyone else has had similar problems on their device. Or maybe try to get in touch with the person that cooked it. You can PM them or something. I'm sorry but beyond this....I cant tell you what to do....I've never flashed a rom on my device. Still learning Perhaps someone else on this forum can guide you.
Good Luck
Thank you but i don't think the rom is the problem,
I entered the boot loader and tried flashing 2 different roms and the same thing happens right before the HTC welcome screen "the animated picture where HTC logo appears" the device turns of !
so what is that !!!!
any help please
mine like the fridge!
For troubleshooting, try to cool it in the fridge for some minutes before you turn it on. If this helps, then I have no idea what causes the fault! But you are one step closer by knowing if its a hw or sw issue
If this helps, then I have no idea what causes the fault!
Click to expand...
Click to collapse
lool
I tried what you said but didn't work too !
I think it might be the RAM or something .. what do you think ?
could be
I've red somewhere that its a RISC controller in the Elf. If so; it contains a RAM itself. So even tough I'm not a specialist on this things I belive that it could be a internal fault in the RISC or the multiplexer to the external RAM or the RAM itself. These things are all a motherboard issue that needs a replacement - in other words a new phone!
If its a SW problem it should work fine with the orignial ROM. On this field I shall keep my mouth shutt 'cus I know nothing about phone/smartphones!! I do think you should make it to the bootleg whit any ROM.. I belive!
have you tried to hard reset
1) Simultaneous press and hold "Power" and "Camera" key.
2) Press "Reset" once with the stylus and then release all keys.
Yes I've tried hard reseting !
These things are all a motherboard issue that needs a replacement - in other words a new phone!
Click to expand...
Click to collapse
That's a relief
Have you tried flashing one of the original roms onto your device? If not....give that shot. You'll find a list of all original shipped roms on the wiki.
I'm not sure
If the mailfunction started after you ROM-flashing "upgrade", then its more likely that its the software. But I know nothing about software on this things or what the symptom may be if theres a missmatch on the phone configuration/model and ROM.
guys I've tried everything even original roms
I think i've to change the board !
Thank you all
My X1 died tonight do I may have dropped it one time to many, thusly the screen started to malfunction also the phone will not start anymore..
I have switched to my Symbian Samsung Phone as of 10 minutes ago.
Tomorrow I will put my old X1 in into the box which it came to this Earth and send it Vahalla.
I will post a video of it passing on Youtube tomorrow and post the link.
X1 - May You rest in peace.
/Fred
p.s. I will switch to the HTC HD2 later in the new year.
R.i.p x1, r.i.p
kissiman said:
R.i.p x1, r.i.p
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=QKtpqC3Rx44
I thought you were going to cremate the box
lolz. rip.
my x1 is pretty sick but not dead yet. resting comfortably on some papers in my drawer. lol.
Oh the tradgedy
My condolences. My parents told me my last phone ran away. It happens ALL the time they said. I caught them flushing it down the toilet. It didn't run away at all. It was dead... DEAD!!!11!!!1!! *Sob*
Anyway so what puppy....er phone... er pupp... whatever will you get to replace it?
Ohh sorry to hear that dude....I just got my phone up from a half dead state..I cant even think of dropping it...So next time when you get your HD2 never let it drop down, or else you will have to make a tribute video for that too...Dont drop the phone...
Hey Euroman28!
It's sad that your X1 died, may it rest in peace
Maybe you are interested to donate it for some research action.
I still need some broken device for deeper hardware investigations.
You may look at this thread:
http://forum.xda-developers.com/showthread.php?t=569111
We might find an agreement, please tell me if you're interested!
Kind regards,
scholbert
I killed my X1 tonight by deleting of TouchInput item in registry. After restart i saw just black screen with no loading
I pressed volume down and ON button,phone loaded in BOOT session.
Yeep,X1 still ALIVE
I downloaded new X1Blackstone x1.06 firmware and tryed to update firmware. Software said me\Connection Error!\
Wow////Dont Panic!!!
I loaded firmware and tryed to connect again. I reconnected twice in second.
Updating were started.Uhh....
FIRSTLY....if you killed your X1.....DONT PANIC !!! (read xda !! )
@ Malikin
Please can you tell me how can i installed new firmware into my X1???
Thanks
I feel your pain buddy, I do. And I want to share something for greater health of your upcoming beloved HD2.
http://www.phonedog.com/cell-phone-...rce=Rss&utm_medium=Blog&utm_campaign=PhoneDog
Euroman28 said:
My X1 died tonight do I may have dropped it one time to many, thusly the screen started to malfunction also the phone will not start anymore..
I have switched to my Symbian Samsung Phone as of 10 minutes ago.
Tomorrow I will put my old X1 in into the box which it came to this Earth and send it Vahalla.
I will post a video of it passing on Youtube tomorrow and post the link.
X1 - May You rest in peace.
/Fred
p.s. I will switch to the HTC HD2 later in the new year.
Click to expand...
Click to collapse
you could get good money for it as spare components anyway most of the case when phones die due dropping is because the some of the ic's becomemlose on board sometimes is just take 10 min to get it work again with a BGA rework station (what gonna happen to your computer if you take the cpu out)? as my boss would say nothing is inpossible...
The old one doesn't go, the new one doesn't come
happy with your new device, i suggest HD2
I think my X1 is very sick.
The screen is not working like it should.....gives weird colors etc.
It felt in the snow last week....that same day it was constantly restarting and restarting whole day. Then about 1 week it worked just fine and now the screen is acting a bit weird....
I think at has to go to the repairman.....
Display Going crazy
Hi, I also have a problem with my xperia x1 display it doesnt work very good when I boot it up the display and the buttons bellow the display arent working, there is no light nothing, then I have to wait till the windows boots up and start pressing all the buttons (d-pad, call button etc.) so the display could start working, but there is another problem when I press the on/off button to switch the damn display off the backlight keeps working and the backlight of the keys its just so strange. I tried changing windows but its the same. Pls HELPPP!!!!!
naveedash said:
Please can you tell me how can i installed new firmware into my X1???
Thanks
Click to expand...
Click to collapse
try the search button... less keystrokes needed than your message: look at first sticky http://forum.xda-developers.com/forumdisplay.php?f=471
hi nice guys! I have a opal at about 2 years, it ever worke fine, but for a few months ago, It started to work strange, it started "quickshutdown.exe" i tought it was a problem from the rom (using pajerm one) i've downgraded to the original one, but the problem stayed there...today I disassembled the phone started it with just the board and lcd fixing the battery with my hand to see if there is a problem with the cover power button, but nothing done, the problem keeps there... it acts like the power button were stuck always pressing.. anyone had something like this? any solution?!
Thanks all of you! For this forum i keep watching everyday!
Ps: Sorry for my bad english
wick3d68 said:
hi nice guys! I have a opal at about 2 years, it ever worke fine, but for a few months ago, It started to work strange, it started "quickshutdown.exe" i tought it was a problem from the rom (using pajerm one) i've downgraded to the original one, but the problem stayed there...today I disassembled the phone started it with just the board and lcd fixing the battery with my hand to see if there is a problem with the cover power button, but nothing done, the problem keeps there... it acts like the power button were stuck always pressing.. anyone had something like this? any solution?!
Thanks all of you! For this forum i keep watching everyday!
Ps: Sorry for my bad english
Click to expand...
Click to collapse
bro i think it is not software problem or rom
maybe it refer to hardwares
so it's better to show your device to a an expert
best act as i think
thanks! i wanted to see if anyone had something like this... it was the gameover to the phone, i got on touch pro and one LG with android so im not gonna repair it anymore...
thank you anyway!