As you might have noticed in my previous thread, my Wizard took a splash.
Now, after ordering a new LCD screen, my keyboard seems to have stopped working on certain keys, and the LEDS won't go on anymore.
I think the flat cable between the board and the keyboard unit has gotten a breach in it.
Now, does anybody know where I can get a replacement keyboard, the electronics that is?
Or does anybody have a broken wizard I can buy cheap to canabalise to repair my own?
I can't seem to find anything on the internet, and I am really fond of my little Wizard.
Please, can someone help me ,before I go broke trying to buy myself a new one?
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
Hi to everyone.
I dropped my wizard and lcd broke so I bought a new one and put it on. The problem is that although it takes phone calls and it syncs to pc, the screen is always white with nothing written..only a white screen. I do not know whether another problem occured besides the broken lcd. I tried to disassemble and reassemble it again but with no success. Any help please?
Hi, If my understanding is correct there are 2 versions of LCD for the Wizard. Are you sure that you have the right one? I'm sorry that I am unable to offer any further advice except to say that if the phone 'phones' and 'syncs' the basics must be working. Also the white screen means that the backlight is working - the problem is the LCD drive. Perhaps worth checking with your replacement supplier that they sent you the correct part?
Good luck!
Anybody have a broken HTC uni?? I need the part that connects the mainboard to the screen, my son got a hold of mine XDA EXEC version and kept turning the screen around and around.
Anyways I took it all apart and found the faulty part so I'm looking for one the possibly got wet, broken screen, broken ports, broken keyboard etc...
Or possibly if anyone knows of a place where I can find the parts...
Welcome to forums
Ask a Mod to move your thread to marketplace so you´ll get better chances
Good luck,
I've got one if you wanna buy my. Got one where the screen is blank and the other where my usb port is gone.
bark4mark said:
Anybody have a broken HTC uni?? I need the part that connects the mainboard to the screen, my son got a hold of mine XDA EXEC version and kept turning the screen around and around.
Anyways I took it all apart and found the faulty part so I'm looking for one the possibly got wet, broken screen, broken ports, broken keyboard etc...
Or possibly if anyone knows of a place where I can find the parts...
Click to expand...
Click to collapse
You can just get the part off eBay, it's something like $25-$30.
I had a similar need: I had to buy a broken screen Universal, to take the motherboard out and fix my device (problems with bootloader...)
I got a screen damaged Uni from ebay with 16 pounds, and when I got it I saw the screen ok, and only had to push the connector inside a little harder and all was good. So I got a fully functional Universal device for 16GBP. My advice is you try Ebay.
Ok, I have done some searching and I am still not sure of the answer to my question.
I have a HERM 100. I broke the screen on accident, but it was having the WSOD problem anyway. I still love the phone and I am trying to fix it.
First question is I have the screen with the P/N HTC60H00037-01M. I have looked several places on ebay, and the only ones I can find selling this exact screen are almost 2 times as expensive. Most if not all the others are saying this screen will work HTC60H00037-00M
Here are the links
The cheaper one with -00M on the end in one of the pictures.
The more expensive one with the EXACT same number as my screen in the pic.
Will the cheaper one work in my phone or is there a real difference between the two screens.
Oh, and does anyone know the best way to get a chip reflowed? I have been watching and reading the WSOD thread, and the only option that seems to fix the problem permanently. I am not able to do this myself I don't think, but if anyone has a surefire way to do this at home I am willing to listen, I just want my favorite phone back.
Chris
5.8LImportEater said:
Ok, I have done some searching and I am still not sure of the answer to my question.
I have a HERM 100. I broke the screen on accident, but it was having the WSOD problem anyway. I still love the phone and I am trying to fix it.
First question is I have the screen with the P/N HTC60H00037-01M. I have looked several places on ebay, and the only ones I can find selling this exact screen are almost 2 times as expensive. Most if not all the others are saying this screen will work HTC60H00037-00M
Here are the links
The cheaper one with -00M on the end in one of the pictures.
The more expensive one with the EXACT same number as my screen in the pic.
Will the cheaper one work in my phone or is there a real difference between the two screens.
Oh, and does anyone know the best way to get a chip reflowed? I have been watching and reading the WSOD thread, and the only option that seems to fix the problem permanently. I am not able to do this myself I don't think, but if anyone has a surefire way to do this at home I am willing to listen, I just want my favorite phone back.
Chris
Click to expand...
Click to collapse
Well at least they are both made by Toppoly and that is the crucial thing because different manufacturers use different digitizer circuits:
http://forum.xda-developers.com/showpost.php?p=3372952&postcount=4
NB - This link is for reference only it was written for another Hermes owner who had bought a Hitachi part.
So I think you should be ok with the cheaper one - but I wouldn't put a 100% guarantee on that. (My understanding is that it should be ok though).
Obviously buy from a company that has put in writing that it works ok - just in case a return is needed.
Regarding reflowing the chip. You can experiment with an oven (though I wouldn't like to guess the temp or length of time) - and remove the plastic layer from the keys side. To be honest though, I'd look for a part on ebay or a device being parted out here - because if you try the oven method, you'll probably need a new part anyway
Mike
Ok, I got the cheaper one, and put the phone together. I am having a small problem. I think it is related to the WSOD issue now. After replacing it I put the phone together and it was working but the screen was very white. There were colors and objects on it but they were very hard to see, you had to look from an angle. After charging it a while and working with it (and thinking I screwed up again) I got the screen to work with some pressure on the right side. I am thinking that is the connection for the screen that you almost bend backwards. I am going to re examine that, and look locally for someone who will reflow my chip. This must be the problem.
At first I was not sure but now I have finally gotten a few minutes of non WSOD use out of it, so indeed the cheaper one WILL work.
Again, thanks mike, you are the man. I am certain I can find a dunked 8525 that will allow me to get my WSOD issue fixed.
-to sum up, the cheaper screen WILL work! good times.
Chris