TouchFlo on a Panel? - XPERIA X1 General

Hi,
Im using the orginal R3A Rom from the forum and would like to have the TouchFlo featuers on a seperate panel, is this possible? Can I just install touchFlo without to install a new Rom? Do I have it to install on phone memory for better performence?

Look here:
http://forum.xda-developers.com/forumdisplay.php?f=436
"TouchFlo3D on Xperia X1"
and
"TouchFlo3D as Panel Installer"

dogans said:
Look here:
http://forum.xda-developers.com/forumdisplay.php?f=436
"TouchFlo3D on Xperia X1"
and
"TouchFlo3D as Panel Installer"
Click to expand...
Click to collapse
Nice ill check it!

Note that the panel installer for TouchFlo only works on TF3D Beta 1 and 2

ipporek said:
Note that the panel installer for TouchFlo only works on TF3D Beta 1 and 2
Click to expand...
Click to collapse
Im a newbie, doesnt it work installed on the official R3A Rom? Im lloking for something that just add a new Panel and in this panel Ive the hole touchflow 3d things...

audino said:
Im a newbie, doesnt it work installed on the official R3A Rom? Im lloking for something that just add a new Panel and in this panel Ive the hole touchflow 3d things...
Click to expand...
Click to collapse
It problably does. But what I mean is the version of the TF3D cab. Latest is B3, but that doesn't work as a panel. So you'll have to use B2.

ipporek said:
It problably does. But what I mean is the version of the TF3D cab. Latest is B3, but that doesn't work as a panel. So you'll have to use B2.
Click to expand...
Click to collapse
Ok Ill take a look

dogans said:
Look here:
http://forum.xda-developers.com/forumdisplay.php?f=436
"TouchFlo3D on Xperia X1"
and
"TouchFlo3D as Panel Installer"
Click to expand...
Click to collapse
Im sorry but there isnt any topic of installing touchflo3d as a panel and searching with the words doesnt helps...

audino said:
Im sorry but there isnt any topic of installing touchflo3d as a panel and searching with the words doesnt helps...
Click to expand...
Click to collapse
Just in case you didn't notice my earlier post, you'd only be able to install B2 as a panel and not B3.
Anyway you can get the B2 cab here and the panel installer here. What dogans meant was probably that if you did a search or looked at the stickies you'd find it easily.

Related

Manila2D on Sony Ericsson X1 (Instructions and file in here!)

Hi, been home from work on a sick leave all day, and being bored to death started looking at the possibilites of perhaps making Manila2D available on the X1 (Portrait-mode only though)!
Instructions goes like this.
1. First, install the latest version of Manila2D. It can be found here:
http://forum.xda-developers.com/showthread.php?t=398173
Follow the instructions found on that page.
2. Next, install the VGA-update made by pijulius, everything explained here:
http://forum.xda-developers.com/showthread.php?t=429224
(the file you're looking for is the last link in the first post).
3. Go to Settings -> Today and uncheck the TouchFlo-plugin.
4. After you have done that, download my file, extract HTCHomeSettings.xml and move it to the Windows-folder of your device.
Go back to the settings for Today and check the box for TouchFlo. Voilá, working.
If your ROM is not WWE, but perhaps Swedish or something, you can follow the instructions in the last answer of this post, this will fix alot of problems you might otherwise encounter:
http://forum.xda-developers.com/showpost.php?p=2691419&postcount=2741
Thank's to: Herg62123/others for Manila2D, pijulius for the VGA-version, darth maximus for his QWVGA-version that taught me alot, and ababrekar for the HTCHomeSettings XML-tutorial.
Will continue to work on this to see if I perhaps can improve it somehow
Screenshots:
Oh, the background image is taken from a QVGA-Manila2D-theme and resized to WVGA-size, renamed hh_fw_background.png and put in the windows\manilagfx-folder.
Bet it looks awesome on that screen.
Good job!
Great!
I really want my X1 - NOW!
Oh my!!! That is nice.
Can you make Manila2D work on one of the panels? Or does it remove panels?
I suppose the next step would be to get the new version of Manila from the Touch HD.
Hehe I'm unfortunately not that good This is a today-plugin for the Microsoft Today-screen, which is one of the panels!
Yeah, hopefully we'll get a version that's made for WVGA from the Touch HD when it's released!
FunkyMike said:
Oh my!!! That is nice.
Can you make Manila2D work on one of the panels? Or does it remove panels?
I suppose the next step would be to get the new version of Manila from the Touch HD.
Click to expand...
Click to collapse
I'd really like to know that too!
I suppose someone will have to look into the Xperia Panel SDK:
http://www.sonyericsson.com/cws/cor...esource.SonyEricsson_Xperia_X1_panel-20080903
Too bad I cant program : (((
FunkyMike said:
I suppose someone will have to look into the Xperia Panel SDK:
http://www.sonyericsson.com/cws/cor...esource.SonyEricsson_Xperia_X1_panel-20080903
Too bad I cant program : (((
Click to expand...
Click to collapse
I've already got that installed... but unfortunately they only support C++ for Panels at this time... am waiting for 'em to support C# and VB.Net CE.
msalmank said:
I've already got that installed... but unfortunately they only support C++ for Panels at this time... am waiting for 'em to support C# and VB.Net CE.
Click to expand...
Click to collapse
Lets hope it wont take them too long to bring out a new version! )
Nelsh:
Which prototype do you have and how well does it perform .. panels and touchflo interface?
Would be good knowing on what the final device will be capable of.
Sorry I havent answered..been too busy trying to figure out this xml-thing! I have a 256 MB RAM-prototype..obviously I love it, wonderful phone! Even better now with the Manila2D up and running!
nelshh said:
Sorry I havent answered..been too busy trying to figure out this xml-thing! I have a 256 MB RAM-prototype..obviously I love it, wonderful phone! Even better now with the Manila2D up and running!
Click to expand...
Click to collapse
How's it handling the panels and overall performance with the 256 mb?
Any bugs you've noticed? How's the keyboard?
Did you add this as a new panel along side the other panels or you completely remove xperia panels?
and could you try TFL3D next time wonder how the speed is going to be with the 380mb ram version
Insaneboy said:
How's it handling the panels and overall performance with the 256 mb?
Any bugs you've noticed? How's the keyboard?
Click to expand...
Click to collapse
Even with 256MB and the latest ROM X1 is fast enough. The keyboard is OK, I can make comparison only with E90 and TyTN, but I think that X1's is better.
Ronka said:
Did you add this as a new panel along side the other panels or you completely remove xperia panels?
and could you try TFL3D next time wonder how the speed is going to be with the 380mb ram version
Click to expand...
Click to collapse
This isn´t a new panel or something, its a today-plugin that runs on the "standard" today-screen, which also happens to be one of the panels!
Unfortunately there isn´t any good versions of TouchFlo 3D out yet!
Any idea if it will work on other WVGA devices, especially Toshiba G900? As far as I know G900 has only 128 mb ram so that may be a problem.
Doesn't work on my G900, cycles message "Tap here to launch Touch 2D... Launching Touch 2d... Tap here to launch Touch 2D"
Piotr1225 said:
Doesn't work on my G900, cycles message "Tap here to launch Touch 2D... Launching Touch 2d... Tap here to launch Touch 2D"
Click to expand...
Click to collapse
If you just install Manila2d (without the VGA-icons and without my HTCHomeSettings.xml), does it work then?
I installed non-HTC device patch, and now it's working. It's quite fast.
nelshh said:
If you just install Manila2d (without the VGA-icons and without my HTCHomeSettings.xml), does it work then?
Click to expand...
Click to collapse
No... it doesn't work Work only with Manila HTC Patch... but i've a small screen
nelshh said:
Unfortunately there isn´t any good versions of TouchFlo 3D out yet!
Click to expand...
Click to collapse
Even though this maybe true, could someone with the knowlege try it out anyway?

Weather app for X1 like in TF3D?

Hi,
is there a weather application already installed on the X1 or is it possible to have a weather panel installed easily and w/o too high additional costs?
Eriol
There is a weather application in 2 of the original panels and also in the spb panel.
I use Manila2D now (with built-in weather tab), but earlier I used WeatherPanel with the TouchFlo animations from the dev-forum.
dothan said:
There is a weather application in 2 of the original panels and also in the spb panel.
Click to expand...
Click to collapse
Ok, great!
helloo.. here comes my first post.. I've been readin lots in here latly and just flashed my X1 with the new Touch It 6.5..
now i really like my phone.. cant believe what u guys can all do with it...
anyways since i like WM 6.5 i dont really need TF3D .. i tried 2 install the cab but doesnt work...
aaanyways.. what i would like 2 have is a weather panel in tf3d design?
nelshh I use Manila2D now (with built-in weather tab), but earlier I used WeatherPanel with the TouchFlo animations from the dev-forum.
Click to expand...
Click to collapse
dev forum_? i was really looking 4 quite some time now... i know u guys get annoyed by us newbs askin stupid Questions and askin 4 stuff tht is already somewhere on the forum hehe
but plss help.. i promise I#ll get better
Lex360 said:
helloo.. here comes my first post.. I've been readin lots in here latly and just flashed my X1 with the new Touch It 6.5..
now i really like my phone.. cant believe what u guys can all do with it...
anyways since i like WM 6.5 i dont really need TF3D .. i tried 2 install the cab but doesnt work...
aaanyways.. what i would like 2 have is a weather panel in tf3d design?
dev forum_? i was really looking 4 quite some time now... i know u guys get annoyed by us newbs askin stupid Questions and askin 4 stuff tht is already somewhere on the forum hehe
but plss help.. i promise I#ll get better
Click to expand...
Click to collapse
Hi,
What the WM6.5 ROM that you currently used for your X1? Is there've any issue on the same?
ryip said:
Hi,
What the WM6.5 ROM that you currently used for your X1? Is there've any issue on the same?
Click to expand...
Click to collapse
Hello.. I'm using Itje's ROM... its really cool...i think its prty fast and good 4 everyday use.. i havent discovered any bugs..
but there is an own thread 4 tht on the rom dev page...
soo sb know where i can find a TF3D weather panel.. does it exist?? ^^
Lex360 said:
Hello.. I'm using Itje's ROM... its really cool...i think its prty fast and good 4 everyday use.. i havent discovered any bugs..
but there is an own thread 4 tht on the rom dev page...
soo sb know where i can find a TF3D weather panel.. does it exist?? ^^
Click to expand...
Click to collapse
Seems the TF3D weather panel can't to spilt out separate and it's should only can used when installed the TF3D CAB. I'm sorry since i'm just a beginner in WM.
For the WM6.5, do you have the URL that i can get it and try then?
nelshh said:
I use Manila2D now (with built-in weather tab), but earlier I used WeatherPanel with the TouchFlo animations from the dev-forum.
Click to expand...
Click to collapse
well looks like he had a panel like tht? anybooooody.. heeelp plsss
!!!
ps...>>anyways.. heres the link...4 TI 6.5 http://forum.xda-developers.com/showthread.php?t=489469
can try this one..
http://forum.xda-developers.com/showthread.php?t=454116&highlight=weather
SPB weather

High resolution/small icons in programs and settings?

Hi there!
I recently switch ROM from SwiftBL 7.5 to Duttys 3.6b Final and noticed the difference of the icon size in settings and programs. In my other ROM I had small icons which I prefer more than large ones. Any way to change that back?
Please help me!
Thanks in advance!
someone please help?
....and if you install the 4-icons-in-row TF3D tweak? Do you get the proper result than?
maybe Diamond Tweak and : "4 rows icons" tweak will help ?
EDIT: Wrote in the same time
Or Scorpio's cab.
Krzysiec said:
maybe Diamond Tweak and : "4 rows icons" tweak will help ?
EDIT: Wrote in the same time
Click to expand...
Click to collapse
dear god
guess I'll to try that out. Thanks alot!
Yes! That's the result I wanted to get. Sorry but I'm kind of new to this. Thank you for all the help!
xilver860 said:
Yes! That's the result I wanted to get. Sorry but I'm kind of new to this. Thank you for all the help!
Click to expand...
Click to collapse
Hmmm, I'm searching like a kitten for a piece of steak, but I can't find that little tweak.
I did install TF3D, but I cant find it under tweaks, nor can I find it on the forum.
could someone please paste a link to the tweak?
FuzzFuzz said:
Hmmm, I'm searching like a kitten for a piece of steak, but I can't find that little tweak.
I did install TF3D, but I cant find it under tweaks, nor can I find it on the forum.
could someone please paste a link to the tweak?
Click to expand...
Click to collapse
Its this one man - Clicky
Kien posted it like 4 posts up. Hope it helps
kaos_king said:
Its this one man - Clicky
Kien posted it like 4 posts up. Hope it helps
Click to expand...
Click to collapse
Yep, I saw that one, But is that the same as for the Diamond tweak TF3D?
or is it just a cab that aranges the icons immediatly?
FuzzFuzz said:
Yep, I saw that one, But is that the same as for the Diamond tweak TF3D?
or is it just a cab that aranges the icons immediatly?
Click to expand...
Click to collapse
It arranges the icons into 4 columns, might need soft reset after install but it works, I installed it after a ROM update yesterday
Cool, I'll try immediatly

[REQ] TF3D as stand-alone

Hi,
I am looking for a stand-alone version of TouchFlow 3D?
Is there one out there?
Greetz from Bavaria,
berkley
TF3D?
If by "stand-alone" you mean a .cab installer, check here
If you mean to have it not as a your today screen you could install second today and assign it to that.
grahamkdt said:
If by "stand-alone" you mean a .cab installer, check here
Click to expand...
Click to collapse
Thanks a lot! This is what I was looking for!!!

[SOLVED][How to enable coverflow mode in manila tabs]

Hello to all ...
How Will we enable the coverflow mode in documents tab,photo tab etc ....it Will work only with accelerometer device or ????because i have seen ina xperia ROM ....Like xperia did not havé thé accelerometer.....
Thanks....
Hi shafizal, you need to check the version of manila that has coverflow. I think manila package from TP2 do not have coverflow. Check here: http://forum.xda-developers.com/showthread.php?t=691598
Also, if you are using xperia X1, it does not have accelerometer, but i remember guys over at X1 forum have figured out on how to trigger rotation on manila. If i remember correctly, Rotastrain are one of those guys there with solution. Head over there for solution.
tidus18 said:
Hi shafizal, you need to check the version of manila that has coverflow. I think manila package from TP2 do not have coverflow. Check here: http://forum.xda-developers.com/showthread.php?t=691598
Also, if you are using xperia X1, it does not have accelerometer, but i remember guys over at X1 forum have figured out on how to trigger rotation on manila. If i remember correctly, Rotastrain are one of those guys there with solution. Head over there for solution.
Click to expand...
Click to collapse
thanks bro
i don't understand.
tidus18 said:
Hi shafizal, you need to check the version of manila that has coverflow. I think manila package from TP2 do not have coverflow. Check here:xxx*
Also, if you are using xperia X1, it does not have accelerometer, but i remember guys over at X1 forum have figured out on how to trigger rotation on manila. If i remember correctly, Rotastrain are one of those guys there with solution. Head over there for solution.
Click to expand...
Click to collapse
i'm using manila 2.5.20161332.0 in a Xperia X1. Can I enable coverflow?
Here: xxx*
Says that in my version, landscape is enabled but dont says nothing about coverflow.
Sorry for my bad English.
Thanks
*(I'm a new user and i can't post links xD)
MENDO corp said:
i'm using manila 2.5.20161332.0 in a Xperia X1. Can I enable coverflow?
Here: xxx*
Says that in my version, landscape is enabled but dont says nothing about coverflow.
Sorry for my bad English.
Thanks
*(I'm a new user and i can't post links xD)
Click to expand...
Click to collapse
no brother xperia does not have accelerometer so we dont have this options
shafizal said:
no brother xperia does not have accelerometer so we dont have this options
Click to expand...
Click to collapse
OK, thanks for solving my question

Categories

Resources