ProblemRestoring-SPB MobileShell3 - Windows Mobile Development and Hacking General

Hi friends,
I got a problem with restoring SPB MobileShell3.
When backing-up it seems no problem at all, everything running smooth.
But when I need this backup, I get an annoying message that says like 'Can't restore settings'
Does anybody know a solution?

'Can't restore settings'

let me se
'Can't restore settings'

hknklbk said:
Hi friends,
I got a problem with restoring SPB MobileShell3.
When backing-up it seems no problem at all, everything running smooth.
But when I need this backup, I get an annoying message that says like 'Can't restore settings'
Does anybody know a solution?
Click to expand...
Click to collapse
Seems work only if you restore from the same build of MobileShell3...
If i backup and restore with same build (RC1) it works, but when i would restore from previous build i have got the error message...

Related

Lost my Inbox and SMS. please help!

I'm not sure exactly how or when this happened... but I recently did a hard reset and a restore, I cannot seem to go to my inbox or even send sms from my contacts list.
The icon is still on the start menu but it does nothing.
any ideas?
thanks
Dino
Are you using sprite backup?
Try to upgrade the backup software.
i just use the backup utility of active sync.
i'll look into sprite backup thanks.
i ended up hard resetting and just reinstalling from scratch.
too about an hour and a half to reconficgure and resetup my phone.
You can solve this issue..
Just restore your old backup, install Sprite Backup 3 (make sure its not older than version 3) and backup your device using Sprite Backup.
Now, hard reset your device & install Sprite backup, then restore ONLY the SMS messages.
It shall work like a charm 8)
It happened the same to me but after making a backup. I just lost the access to my inbox and tried to send an SMS in the contact itself but noting. Not even receive them. Anyone can help so i cant have to install averything over again. My backup was just perfect ..but then this happened after restoring
Never use Sprite Backup earlier than version 3
I used the XBackup that comes in windows...
Imagination, what backup software you've used to make the backup ?
This case happens when you restore a backup, so did you make a restore?
Yes it hapened after i made a restore. I used Xbackup (the app thats already intaled in windows). I used it for the backup and for the restore. I made restores before and this doesn't happened. But this time i lost the inbox and sms.
aha, seems your SMS reception is dead now!
It happened to me once, when I did a restore. I was forced to hard reset my device
but before the reset, I backed up the entire device using sprite backup, and then I did a hard reset, installed Sprite Backup 3, then restored ONLY the SMS databases. It worked!
But for you, you are not willing to re-install your applications!
I saw a program that fixes this problem. It clears the SMS databases.
after that, you can restore only the SMS part of the backup.
I guess its named SMS CLEAR...
If I find it, I'll send it to you, dude :wink:
Ok thanks. I will try to find it. Hope it works. I will try sprite backup too. thanks
Your most welcome, dude
here I found it, its name CleanMail !
It fixes all the database corruptions in your SMS & wipe all emails & SMS messages, so be sure you have backup of all these databases.
you can get it from here:
http://www.spritesoftware.com/downloads/CleanMail.zip
pikaaaaaaaaaa 8)
Read the forum discussion about CleanMail here:
http://www.spritesoftware.com/forum/viewtopic.php?t=1141&highlight=cleanmail
First of all thank ezzkht for ur help. I realy thought tha this app will working after reading the forum. But...did't ddid the tric...after udse the app the in box and sms still does't worked. The only improvment that made was appearing in inbox You have a new SMS message, but no luck trying to open. After that i reeintaled the backup and used the app again but still no luck. I have to make an hard reset in the week end and reeinstall all over again and i will use a third party software for backing up. Thanks for the help
Oh am sorry to hear that
Well, its better to do a hard reset, since it seems that SMS databases are hardly damaged!
I advice you to install Sprite Backup 3.. its the best backup software ever!
I wish it will work out smoothly with you.
Cheeeeeeeeeeeeeerz :lol:
Solution for missing Inbox SMS Folder (and service)
Hello! I managed a solution to recover the the missing Inbox SMS Folder (and service) from a recovery by ActiveSync. The problem is that when we restore there is an active program that uses that service and therefore it cannot be restored. In my last try I unistalled Webis Mail, unchecked everything in "Today" and made a soft reset. Don't run the Outlook in the PC, if you use Jeyo Mobile Extender because this program acesses the SMS folder in the PDA. Do a restore, and when it finishes it'a all OK again. I was already preparing myself to do a Hard Reset to use SMS again! :lol: By the way what's the best ROM for Window 2003SE ? Thanks.

Cannot install MS Voice Command anymore

Hi,
yesterday I flashed a Big_Storage_ROM. Everything went fine. I did a backup with sprite backup. Even the restoring went fine.
then i wanted to move some applications to my Storage area. I deinstalled them and reinstalled them there.
everything went fine, except MS Voice Command.
I always get an error message telling me that it could be installed and that I have to run setup again ...
any ideas what i could do? could there be any registry entries that i have to delete before i can install it again?
any help would be greatly appreciated!
Thanks,
Trin

PIM Backup Restore Issue

Hi Guys,
I recently fixed my dopod (running on windows mobile 5) though numerous hard resets and letting it rest for awhile. However, it won't restore the PIM Backup I made using PIMBackup. FOr some reason it says that my files us invalid.
Does anyone know how to fix this issue?
Many thanks in advance!

From JPC to JM8 - contacts issue

Hi!
I am trying to move from JPC to JM8. Have made a "backup all settings plus system data" with titanium backup. All apps install with no issues. The problem is with system data, particularly with contacts. When i try to restore contacts an then reboot, i get forced closes stoping ".acore" and ".media".
Can anybody help me with this? What can and cannot do to try to solve this issue?
Thanks in advance!
Anyone? Please?

[Q] 'Bootloop' because of 'show touches'

Hey guys, got a little problem and hope you can help me:
Got into developer options to change sth and by accident activated 'show touches'. After trying to deactivate it I got a hot reboot. When the phone was done loading I wanted to enter my PIN but when I started it rebooted again. Tried again but seems as if I can't access anything because on every touch my phone does a hot reboot.
My problem is that I haven't done a backup in the last weeks and can't get rid of this 'bootloop'.
Is there a possibility to revert 'show touches' (flashable zip/from the backup I made of the crashed system)?
niuhap
HTC HD2 EU 512
ROM: Paranoid Android Leo Beta V2.15
Making a backup of the "crashed" system is making a backup of the "show touches" being checked, it won't help as a whole, read below.
I have heard many people having this issue, however I haven't faced it before, I can show touches and use the phone just fine.
Anyway, I am not sure if this will work or not, but it's worth a shot. You make a backup of your current system, then wipe and reinstall the ROM from scratch. Then use the Advanced Restore to restore your data and everything else but "system" partition. Now I am not sure if the changes you made are stored in "data" or "system", but as I said it's worth a try.
Yep, I know that the checked 'show touches' is included, though maybe it's possible to extract that..and change it?
Advanced restore was my first attempt - sadly I had hot reboots after restoring 'data' and not 'system'. ;/
I'm neither a developer nor a cook, I am not sure if that can be done.
Okay, you can use Titanium Backup to restore apps from a backup.
Wipe, then flash the ROM again and install Titanium backup, press the menu and you should see "extract from nandroid backup" or something like that. This will allow you to restore the apps and (possible along with their data), but you'll have to set up the phone again, you will just get the apps. Try it and see how it goes.
Edit:
Ahhh, I'm sorry I forgot to mention, I only use TB Pro. I am not sure if that's a pro-only feature or is available on free as well. So if you can't find it, maybe you'll have to get the pro version .
Ah ok, learned sth new..thought I had been through TB by now?
Will try that and look how much I can save/restore, thx m8!

Categories

Resources