hi guys i have a problim in i-mate k-jam
its freaz in align screen & dont want 2 move
some friends told me close it 2 or 3 day & will be back well
but nothing happend still dont open
i put all what i have from wm 5 & 6 nothing work
help pls what i can do !!!!!!!!!!!!!!!!!!!!!!!!1
Related
Hi all,
first off all i'd like to say Hi to everyone as im new here.
Also id like to thank everyone for readingmy problems
Any way i purchased an XDA II about a Week ago from Ebay its really my fault as in the item description it said there was a problem with the phone it wont start as its locked.
The phone goes to a Blue screen after you ON it and do the screen configiration etc
The blue screen has Cognito on it saying 'Warning this Devcie is Locked'
then under it:
'If you are installing from the MMC card please wait.
Otherwise, either insert the MMC card and do a cold boot, or contact Cognito to unlock the device.
Im not sure what this means and if i leave the phone for a while or type it from it takes me to a password screen in white with the keyboard on it.
----
Im not sure what to do if you can help me you will save me alot of money otherwise do i just chuck the phone away also
ive tried a Hard Reset by clicking the POWER BUTTON, RESET KET.
nothing happens just the phone loads up and makes me Calibrate the screen.
Ive tried this process while also pressing the D-PAD i get a screen with Serial with V1.06 i think at the bottom
i dont really know how i can know if its Hard resetted.
So please peolple take a Minute to help me thanks alot.
may work not too sure though
hey man i feel sorry for you
okay wot u do is download the o2 rom for the device because u sed it is a xda2 so download and install that. this will do a comlpete rest not like hard reset it will deleted absolutly everything on the xda2 and then install indows 2003 back onto it it will be like getting a new fone. try it i hope it works for u
HI
Thank you so much.
For your Advice and Time.
can you confirm this will remove that Lock thing ?
Also do you know where i can download Win2003 for XDA II o2 UK
Thank again
Hi,
I flashed the himalaya M1000 with WM2003se upgrade. but still could not remove the Cognito (shame).
please if somebody can help that would b nice
Should do. I've done the 1.72 update on it based on the ROM from this site and all is good.
hay do someone know the baterytime of jamin ....i have recently changed new battery samsung 1200mA...but it too dont last more than 12 hrs...without being touched after being fully charged..where is the problem ..can anyone ...suggest me
GO here and see
http://www.afterdawn.com/hardware/product_details.cfm/1608/qtek_s200
then wrong with mine
...i can see the standbytime is 200 hrs ...but ..where is hte problem....can anyone figure it out???i have changed my windows version too ...and bought new battery..but still i dont work ....really frustated....so if anyoen who know where the problem lies...do help me ...thanks
I updated first time that was fine ..
Again i updated with wrong os ..may i think..
Now not switch on my wizard 200 ..
Here i search for reparing this problem..
Then i got jtag ,,that can help..
But i hav no software for doing this ...
I need some ideas ..which software use for direct flashing the rom..?
...,
,
.
.
..
.. Help...........thanks in advance
Pleas...need help ..
Not switch on
possible resuscitation for you wiz 200
I had some bad flashes with my wiz 200 too, a K-jam to be exact
my best guess is dig a bit deeper in the wizard forum
and you find out that there ways to revive it.
1 thing you could try is,
remove your SD-card
get a very bright spot-light so you can see if you phone is working, only the backlight is not activated
press and hold the camera button and press power on, release the power button and you should get a 3 color bar screen.
If it doesn't, search for the MMC restore trick somewhere on this forum
please let us if it worked
Atleast the MMC trick saved my tiny behind
I wish i could search it for you, but i can't open multiple tabs yet on my mobile
ok dear i try this method..if get it ...
it will be the best and best work in my life....
i keep try to unbrick my wizard 200 ...
i only stop searching ...after i die....
i work hard for it...lets wait...i just checking..
well the good news is you could get a broken screen wizard for pretty cheap.
HI DEAR
After all i followed...but not switch on yet..
Wat is the next procedure for unbrick my wizard 200... Help need
no bootloader..no led..after full charge..also..help need
i have solution man
hey u need answer to this question contact me personaly at [email protected] and i can give u the answer.come at chat i will make your wizard live alive man.message me the time to chat
help
no one is here..
can u help for jtag on wizard200
can i get jtag for wiza200
ca i get gtag software ..?
anyone ..pls i want to be unbrick my wiza200...
hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help
To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.
hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!
bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??
Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.
greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...
Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)
...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.
hi i have a strange touchscreen problem actually the screen is stuck and i cant use the phone i hard reset it but nothing new, i download htc rom 6.1 install it and the screen still not responding and remains stuck on "screen aligned" but some hours later the screen alignet target move alone on each corners. without touching the screen. idk what to do but i think i dont need a new digitizer is just blocked and i must wait.. help! (srry for my bad english)
How 2 unlock when there is no touch???
Me sum how the same! (Touch 3G T3238+ cloam)
The phone is locked & touch is not working @ all!
The "unlock" option is on the bottom L. but, there is no touch 2 tap it!! & I can't hard reset w/ any key combination.
Keys work 4 a new opened window e.g. I can answer a call w/ they keys but, they r inactive on homepage.
It's like a PC w/ neither a mouse nor a keyboard!!
When I want 2 install a ROM from SD, there is no touch to choose an option!!
Can any1 help plz??? Thank u.
Guy,
First of all sorry for my english.
I've got same problem 3 days ago. I found out that it's something wrong with the touch sceen. I ordered from local here in bangkok Thailand. it's cost about 700 baht or 20$ us.
I replaced it myseft it's not so difficult. After replace touch sceen module (digitizer). it's work perfectly again.
Dear funnyfriday,
Thanks a lot 4 ur reply.
Well, I was not sure if my touch was really damaged, mostly I though it was a software problem ......
@ last could unlock it by connecting it 2 the PC!!! Now it's unlock but seems that the touch has problem itself BUT mostly there is a software issue 2 as the keys sum times work & sum times don't!!
4 now I'll try 2 change the touch (the phone was bought from another country & in my country the phone & its accessories r not available!)
As soon as I could find any result & a matched ROM, I'll let every 1 know about it
Thanks 2 all.
hi - i had this problem too , HTC guaranty changed my touch completely , after a month i had this problem again and they changed the whole pannel again , now it works fine
Really!! Well, 4 me no guaranty access! I'll change the touch - if it was possible! - then I think I should w8 & c when it gets damaged again!!!
Hi xda-developers,
such problem is caused by an upnormal pressure that applyed on the screen (when set down on the phone while in your pocket), this pressure affect the two layers of the pnone degitizer to be twisted and contacted allways.
you can repaire this by repaire the degitizer as in the last section of this video
http://www.youtube.com/watch?v=noVnvDXWrj8
dont worry because it is not your phone, this is common tip and may applyed to any screen digitizer to release the contact between the layers.
another way is to replace the screen digitizer with a new one from HTC Care Center.
Hi, & thanks 4 ur reply.
I watched ur video. May b u can help me plz.
My phone is Touch 3G T3238+. The screen has no response on any part! only it makes sumthing like waves/halo around finger on touch; does this corresponds 2 any thing?? It got out of order just suddenly after a hard reset.
I went 4 heating but w/ a match!! not a lighter; mayb I did not heated it enough??
Do u know any other way plz?? Shall I heat it again?
Thank u so much
replace your digitizer my dear