Related
Hi
i am having a problem with browing any website on my PPC, the problem is that when i try to open any webpage it stalls on 1kb and it only opens the page partially.
I read another post and they managed to solve this by selecting the correct encoding which was Western European. is there any other possible reasons why this type of behaviour will be experienced on the device?
hope te hear from the superior knowledge of the forum members.
regards
reo
I had that problem when I used one of the custom roms. When I flashed the stock t-mobile ROM, it went away almost completely. Once in a great while it'll happen but I'm talking like twice since going with a stock rom. Couldn't tell you what the difference was as the stock rom performance was fine and I didn't really care enough to look into it further.
reo said:
Hi
i am having a problem with browing any website on my PPC, the problem is that when i try to open any webpage it stalls on 1kb and it only opens the page partially.
I read another post and they managed to solve this by selecting the correct encoding which was Western European. is there any other possible reasons why this type of behaviour will be experienced on the device?
hope te hear from the superior knowledge of the forum members.
regards
reo
Click to expand...
Click to collapse
I'm pretty sure it's a connection issue (I've had similar problems with, say, non-CrEme 4.1 + Toonel pre .54 combinations - see http://www.pocketpcmag.com/blogs/menneisyys/ConfigureToonel45.asp for more info).
BTW, what ROM do you have?
MTU settings could it be the reason ??
Hi
Just to let you no, recently i travelled to another country and i decided to get a sim card and test my device in this country, surprisingly it worked fine i could browse with no problems.
only from in my country on my network do i get this strange behaviour.
Do u think its related to the MTU settings ? if i adjust this then mayb it will allow me to browse, judging from your response i noticed that this option that you suggested is to reduce bandwidth usage therefore allowing to view pages faster.
Thanks kindly
reo
Yeah, this seems to be a problem with your wireless operator. (You could still give a try to it in a, say, inexpensive, GPRS-capable "dumb" phone like the S-E t68i / t610 connected to your PDA / notebook)
reo said:
Hi
Do u think its related to the MTU settings ? if i adjust this then mayb it will allow me to browse, judging from your response i noticed that this option that you suggested is to reduce bandwidth usage therefore allowing to view pages faster.
Thanks kindly
reo
Click to expand...
Click to collapse
You can surely give a try to Toonel (I've BTW linked in Toonel because, under WM5, the (old) Java version has exactly the same problems with old(er) Java environments - I've elaborated on this problem a lot in my articles. That is, the problem was similar to that of yours).
thanks for your help it is most informative, i am currently loading the toonel to test and i will post my results here.
thanks again
reo
setup using newer versions of the program, i hope it does not create an incorrect behviour.
setup toonel have just a quick query
Hi
i have managed to setup toonel version .50, using creme 4.21. i have pIE and this all on a WM5 OS.
i did not utilise the link i just executed directly from the toonel.jar file.
now it is running but i would like to just clearify that i done it correctly.
about the connections i used the method u suggested and created a new connection under the top selection which is used for programs to connect directly to the internet and named it toonel, and made all the adjustments on proxy, i also put the details of the modem which is the GPRS connection for my country.
now i am ready to use.
i have a question about the tab in Toonel called WEB, is there any setting that i should have setup in here, it has a an option called Parent Proxy address.
Regards
reo
HI
ok, i had to reset the device for things to start working properly.
now i hve to use the link, it doesnt set creme as the default JVM. so after i execute i get an error saying **cant find class client.WebUI
im sure there it is a path issue, but not sure about where is the web.ui
reo
Don't struggle with the Java version - use the new PPC-based one. See http://pocketpcmag.com/blogs/menneisyys/ConfigureToonel54.asp .
(Sorry, I've linked in the older Java version because it produced exactly the same symptomps under WM5 as yoour case, not because it's the Toonel version I recommend for you.)
hi
ok, i see. the behaviour i am experincing you noticed it using Toonel java version.
have you get any ideas what could be causing my problem ?
Now we no that it is probably a problem at my network, however is there any way to over come this ?
i actually noticed 1 thing, Magician S100 QTEK works on my network properly!!
any ideas what could be the difference ?
what are the chances that it is related to the UAProfile ? if so how could it effect the browsing ?
regards
reo
no luck with toonnel with "unlimited internet tzones"
now that tzones offers "unlimited internet" ( http://jkontherun.blogs.com/jkontherun/2006/12/got_tmobile_tzo.html ) I tried to use toonel with my wizard to speed up the connexion but didn't have any chance ... I tried the 3 versions on http://toonel.net/downloads.html (I even installed the Creme JVM) though ... some ports must still be closed ...
any idea/comment anybody ?
PS :
the good thing with "tzones unlimited internet" is that I can now use opera mini, gmail java, google maps java, etc ...
i had the same problem with uk tmobile. i called them and they said it would be fixed soon-and a few days later it was!!
maybe call your network provider before messing with your phone settings
dmonik said:
it would be fixed soon-and a few days later it was!!
Click to expand...
Click to collapse
you're right - It's working now yippee !
** UPDATE 16-JUN-2009 **
Introducing Geocasting with Inca X (Video)
http://www.ix-m.com/
GPS Website
http://www.ix-m.com/gps
Latest CAB is always available here
www.ix-m.com/downloads/livecam.cab
The app is no longer in beta.
This program seems really cool, and I was watching shogunmark's video for a second, but wouldn't this absolutely destroy your battery? Activating a 3G connection already triple's my battery drain, and GPS throws on another 200-300 mA.
Phil Bishop said:
Hi All,
We have a new version of an application, which is now available on beta and would greatly appreciate it if any of you have time to participate in the trial and provide me with feedback on whether the software works or not on your device.
In simple terms the new version of the application allows you to broadcast both an image stream and GPS data which can be viewed either in real-time or later via the Live Media Web application
Here's a quick video introduction to the software
http://www.youtube.com/watch?v=6fpQlqJROrw&rel=0
Device requirements:
Windows Mobile 6, camera and GPS (internal or external via BT)
Windows Mobile 5 + .NET CF v2 (or above) camera and GPS (internal or external via BT)
Download CAB from
http://www.ix-m.com/gps-beta/mobile/livemedia-1.5.1.cab
or visit www.ix-m.com/gps-beta from your mobile
Quick video to show you how to set-up the app on your phone
http://www.youtube.com/watch?v=76lzPUwTyHM&rel=0
Website access from your PC to view your broadcasts and published broadcasts
http://www.ix-m.com/gps-beta
Support and Feedback
Please use the contacts form on the website
http://www.ix-m.com/contact.aspx?type=7
As this is my first posting here, hopefully I've got all the html tags correct and I hope some of you have time to try this out and let me know what you think about the app.
Many thanks
Phil Bishop
Inca X Mobile
Click to expand...
Click to collapse
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
met3ora said:
This program seems really cool, and I was watching shogunmark's video for a second, but wouldn't this absolutely destroy your battery? Activating a 3G connection already triple's my battery drain, and GPS throws on another 200-300 mA.
Click to expand...
Click to collapse
This is really good app and is very promising. I have been testing for phil for a while on this. Yes it can put quite a drain on the battery, however when im driving i have it plugged into the charger so as long as i stay topped off then it does alright.
james105 said:
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
Click to expand...
Click to collapse
i had experienced this before with some of dutty's roms, if the .net isnt cooked into the rom correctly then it throws major errors like that. try re-installing netcf and see if that cures your problems!
*i will note that on some cooked roms re-installing netcf doesnt help because of the way it was cooked in.
shogunmark said:
i had experienced this before with some of dutty's roms, if the .net isnt cooked into the rom correctly then it throws major errors like that. try re-installing netcf and see if that cures your problems!
*i will note that on some cooked roms re-installing netcf doesnt help because of the way it was cooked in.
Click to expand...
Click to collapse
ill give that a shot but i doubt thats the issue cause i did a hard reset n installed it n it worked fine and then i tried using it again later on and got that same error msg again :-(
Mogul on Sprint
I've had a couple of reported problems about running the app on the Sprint Mogul, if anybody has sucessfully (or otherwise) run the app on a Sprint mogul it would be helpful to know if this is generic problem or not.
Many thanks
Phil
I have a mogul and it seems to work flawlessly. I was able to broadcast two separate feeds with gps.
Does this software work with WiFi, and cache the images & GPS coordinates, for upload at a later date?
I dont have an unliminated data plan, and uploading multiple images would require me to take out a loan
Cheers, Mike.
EDIT:
I've just gave this a try with WiFi, and it seems to work well.
GPS shows me moving from my office to my lounge, very freaky, very accurate
Just the question about the cache left.
I guess since it does "broadcasting" then it probably cant (yet?) cache the video and GPS data?
Cheers, Mike.
Mike1002 said:
Does this software work with WiFi, and cache the images & GPS coordinates, for upload at a later date?
I dont have an unliminated data plan, and uploading multiple images would require me to take out a loan
Cheers, Mike.
EDIT:
I've just gave this a try with WiFi, and it seems to work well.
GPS shows me moving from my office to my lounge, very freaky, very accurate
Just the question about the cache left.
I guess since it does "broadcasting" then it probably cant (yet?) cache the video and GPS data?
Cheers, Mike.
Click to expand...
Click to collapse
Since I posted lot's of people have emailed asking for a cache then upload option along with the ability to be able to disable the speed tracking
I've been working these today along with several other feature requests and hope to have a new build available sometime tomorrow with these updates in.
would there be a way to lock the screen while broadcasting?
diterex said:
would there be a way to lock the screen while broadcasting?
Click to expand...
Click to collapse
Lock the screen how? You can always map a button to the phone lock.
Hey phil, any chance you can do an overlay and display speed somewhere on the screen?
I am unable to add AOL buddies. I have tried to add a few buddies, even my own. But every time it says that the name does not exist. Anyone know why???
james105 said:
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
Click to expand...
Click to collapse
I am getting the same error when i try to do a broadcast. I am running "[Apr 16] Dutty's WM6.1 5.2.19209 Release [User Guide & ChangeLog in Post 2] UPDATED" which has 3.5 installed already. I tried re-installing netcf 3.5 and i get an error about memory and closing applications, to restart phone and try to re-install. I tried that and got the same exact error. So i re-flashed with Dutty's rom, as listed above, but tried installing netcf from the get go and got the same exact error. Anyone have any ideas???
Would it also be possible to have an option to enable the flash?
The camera flash light on my device is only half decent, but having it on would be a great option.
WildSioux said:
I am unable to add AOL buddies. I have tried to add a few buddies, even my own. But every time it says that the name does not exist. Anyone know why???
Click to expand...
Click to collapse
Sorry, the software isn't linked in to other IM systems at the moment. Only other Live Media users can access your broadcasts, because they need the Live Media client to be able to see what you are broadcasting.
HTH
Phil
diterex said:
would there be a way to lock the screen while broadcasting?
Click to expand...
Click to collapse
If you mean - stop the screen from going to sleep when broadcasting?
Then yes I am looking into a solution for that for handsets that don't stay alive while the camera is active.
greetings phil. very nice program. its working great on my sprint mogul.
Phil Bishop said:
Sorry, the software isn't linked in to other IM systems at the moment. Only other Live Media users can access your broadcasts, because they need the Live Media client to be able to see what you are broadcasting.
HTH
Phil
Click to expand...
Click to collapse
Hi Phil,
Yeah, shortly after posting that question I messed around with it a little bit and made a test name. Everything is working great now.
Now, anyway of making the feed fullscreen on computer?
Version Update
There is now an updated version available, with some of your feature requests in.
Record Mode
Allows you record your broadcasts with GPS offline and upload them later.
On the Broadcaster's setting screen there is a new item "Live broadcast" - tap/select and the Broadcast menu option changes to Record.
If you have a storage card, then the files are saved to the livemedia folder, otherwise under \\appData\livemedia.
On the website, login and under My Broadcasts is a new link to upload your broadcasts.
Please note this is only applicable for GPS enabled broadcasts.
Disable sending speed data
On the GPS enable/disable screen there is a new menu item called "Include speed" uncheck so speed data is not recorded.
Check for updates
From the main menu this can now be used to check for and download furture version updates.
Download link
http://www.ix-m.com/gps-beta/mobile/livemedia-1.5.2.cab
Hi!
I have had this phone for a few days and have unlocked and upgraded to WM6!
I am really happy as I have just upgraded from my HTC Alpine!
My only remaining problem is Bluetooth.
A) I have to turn on Bluetooth before I can send a file within explorer.
B) I can't receive files at all! It simply says ERROR on the senders phone.
The latter is the more important one which I need a fix for ASAP. I have trawelled the web and have not seen a fix.
I have obviously made sure that my phone can be detected and to receive all incoming beams as well as pairing them. Still no luck.
I also had a look at Bluezard which looks quite good as an extra, (want to recieve files without it) but it look quite old and no longer in development, is there any other application that does the same thing that it perhaps a bit more modern?
Thanks,
Joe/Jophster
In phone settings there an icon for Beam. Check it if not already check. Then try to receive file. If already checked then try to change the sending device may be bluetooth not connecting because of any conflicts.
About sending you have to keep the bluetooth active/on because there is IR port in hermes so it will not ask you to on bluetooth.
Bluezard
Hi
Well the ROM I was using apparently had problems so I have tried a different one and will experiment. It was so easy with my HTC Apline, it is so annoying to do something so simple!
Thanks for the help!
jophster said:
I also had a look at Bluezard which looks quite good as an extra, (want to recieve files without it) but it look quite old and no longer in development, is there any other application that does the same thing that it perhaps a bit more modern?
Click to expand...
Click to collapse
Do you know of any others. Maybe a way to chat via bluetooth or to send multiple files. If not then Bluezard looks like a good solution.
Thanks,
Joe/Jophster
I struggled with the same issue and did as told to do and searched a bit more....
Found the answer here.
http://forum.xda-developers.com/showthread.php?t=376945
It was a fault highlighted in the initail build of
TNT.19199 Series UC (Vanilla/Official/Professional)HighQuality.
and as instructed i installed Dr Yar Bluetooth app and all is well.
Ill post this in the other threads i found and see if it makes people happy.
is there a fix for this? tried searching but couldn't find anything, just a lot of threads about the delay to reply which works slightly better due to new fix released today
anyway, in conversation mode, if I reply quickly back to a text message within the same minute then it goes before the text I'm replying to instead of after it!
not exactly good if you send quick texts often as the conversation looks a mess!
thanks
Hi,
Try installing the latest hotfix for SMS. They've sorted out the little bugs in texting. You can download it from: http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Hope this helps!
hitenpatel227 said:
Hi,
Try installing the latest hotfix for SMS. They've sorted out the little bugs in texting. You can download it from: http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Hope this helps!
Click to expand...
Click to collapse
thanks for reply
I'd already installed the update earlier today and it's still there . Surely it doesn't just look at hour:min in the text message details and list them. Wouldn't it work better if they also date/stamp (including seconds) the text when it's received so it will work OK in conversation mode?
try it yourself and send a text to yourself and when you get it, reply straight away and it will put the 2nd sent text before the text you received in the 1st place!
This happened to me where all my Texts were at the top of the conversation and all my friend's replied were at the bottom. Is this the same problem you had? I solved it by changing the message type to unthreaded in settings.
i have same issue .. my gf replies straight away and it appears she answered my question before i asked it .. its very annoying
Took me a LOT of searching when I had the same problem, but this fixed it for me:
Edit the following registry key...
HKLM\Software\OEM\PhoneSetting\
add a DWORD key "TrustTimeZoneField" and give it a value of "0"
No more time zone issues. This is caused by your operator I think sending the wrong time to the phone...
SOURCE: http://www.mattgibson.ca/2008/04/13...gsm3g-windows-mobile-56-smartphonespocketpcs/
this change only solve if u r in diff timezone.
but we are both in same timezone.... but sms timestamp is not basic on our mobile time setting is basic on their one
mkent_barbados said:
Took me a LOT of searching when I had the same problem, but this fixed it for me:
Edit the following registry key...
HKLM\Software\OEM\PhoneSetting\
add a DWORD key "TrustTimeZoneField" and give it a value of "0"
No more time zone issues. This is caused by your operator I think sending the wrong time to the phone...
SOURCE: http://www.mattgibson.ca/2008/04/13...gsm3g-windows-mobile-56-smartphonespocketpcs/
Click to expand...
Click to collapse
I'd faced this issue too. The way I could fix it was set the Time of my HD2 about 2-3 Mins forward than the current time. That solved the SMS order issue.
Actually the issue seems to be due to the Timestamp of the SMS which is given by the Mobile Operator being a bit ahead than the time on your HTC Device.
Did you try it? Was happening in the same time zone with me and this solved it.
harky said:
this change only solve if u r in diff timezone.
but we are both in same timezone.... but sms timestamp is not basic on our mobile time setting is basic on their one
Click to expand...
Click to collapse
yes i tried... it still same.
mkent_barbados said:
Did you try it? Was happening in the same time zone with me and this solved it.
Click to expand...
Click to collapse
sadly that doesn't resolve it
Tanmay® said:
I'd faced this issue too. The way I could fix it was set the Time of my HD2 about 2-3 Mins forward than the current time. That solved the SMS order issue.
Actually the issue seems to be due to the Timestamp of the SMS which is given by the Mobile Operator being a bit ahead than the time on your HTC Device.
Click to expand...
Click to collapse
that's no fix as the problem is then reversed as then incoming texts go before the ones you've sent out . I found that out straight away as I normally put my phone fast anyway but then got incoming texts going before my initial texts! Even just 1 minute ahead doesn't work as texts sent/received within that minute get mixed up!
my G1 used to time stamp them as they came in with the time of the handset, not time sent or network time. Good for conversation on G1 as it got them in the right order but it had it's flaw. The problem being you didn't know when it had actually been sent to you if your phone had been off for any amount of time as it simply time stamped when received when you'd switched your phone back on!
whoever tested the SMS feature of this phone obviously didn't do a good job at all strange that such a great feature handset trips up on one of the most used features that most other handsets work perfectly fine with
There's still no fix for this?
still no fix for this??
BadBoy8 said:
still no fix for this??
Click to expand...
Click to collapse
its annoying that little bugs like this have not been addressed by HTC
same issue here
i am wondering when will HTC put a fix to this fundamental problem on a core function such as SMS. Seriously, the HTC messaging is nice, but with the lag and timestamp issue, it makes HTC seem like they're trying too hard and not focusing on making the phone work well first than look nice. I am frustrated as hell too, but trips to the service centre only gave me answers like "wait for a software release/upgrade", i am wondering whether do you receive any problems with the touch screen? the screen actually jitters and shakes up and down even when your finger is still frequently. i have changed the main board 2 times already and it happens still.
Btw, my set's from singapore.
Fix made! Check this thread: http://forum.xda-developers.com/showthread.php?p=6116612
Ok, I've spent the better part of the weekend searching the this site on a possible answer to my issue, no luck. So maybe someone can help or point me the right direction to a solution.
My Issue: I use MMS audio messaging , I can send messages (around 288K) with no issues but receiving them (same file size) only half is able to download and only 8 sec. of it plays. NEVER had this issue with my original HD2.
Little background: My original HD2 , stock ROM, WinMo 6.5 - the mini usb broke off the motherboard, tried to fix it, no luck, bought another "T-Mobile US HD2" but this one has the 3.14.531.1 update with the jataayu software my original had ArcSoft software as I'm sure you all know this. I went through the registry to be sure some changes weren't made incorrectly (none that I could see) and all the different connection steps/suggestions with no luck but haven't completely wiped my connection settings clean, maybe I should start from scratch ?!?
So, I know most of you are "pros" here because you've help me in the past solve, fix or change things on my HD2 to make it a great phone ...and it still is today.
Thanks in advance for all your help your a great group of talented people.
OK, I figured out a work around. I have to save my received MMS audio file (.amr) and then I can play it in full length using TCPMP. For some reason the AudioPicker/Player in the HTC Messaging Client or Jataayu software will not play audio messages in full length. It only allows 8 seconds of play. Also noted, I read several people that receive photos have to download and save them to be able to view them in full size, possible same issues??. Seems weird.