Internet Sharing appears when plug into USB via PC. [Solved] - Touch HD General

Hi All,
I am currently having this problem, previously I am able to select the connection type when i plug in to PC via USB, asking if I wanna select Activesync, Disk drive, or Mobile broadband.
But since few days back i am no long prompt with the selection.(I could not really remember what i have done.) Now whenever i plug in, it will bring my direct to Internet sharing.
I have tried going to Start> settings> connections> USB to PC and check on the box Ask me first about USB connection type when i connect the device via PC.
I have disable and restart and renable it and restart again and tried it. But still it bring me direct to the internet sharing tab.
I have also restore my sprite backup to 2 months back and it still give me the same thing. I was wondering what went wrong. I am very tempted to give it a hard reset and solve the problem.
Is anyone out there able to help? Is there supposed to be any registry settings that I can set to get back the Selection prompt?
Edited> Solved. I played around with the registry and found it works. I do not know it this will work for others who having the same problem
I tried removing all the keys inside HKLM/software/HTC/usbtopcpopup (of cos i did a backup of the registry) and restart the device but then it don work.
so I import back the original registry and try again and it still don work.
I realised that There is a key inside the folder which name OnlyTwoChoice and the value was 0, So i set to 1 and restart and voila this time i have 2 choices. Sync and Disk drive.
I then try setting the value to 2 this time and voila i get back all my 3 options. Tried plugin to my pc and syncing is working fine.
By the way I am using the original rom. Hope the above information helps.

knight900 said:
Hi All,
I am currently having this problem, previously I am able to select the connection type when i plug in to PC via USB, asking if I wanna select Activesync, Disk drive, or Mobile broadband.
But since few days back i am no long prompt with the selection.(I could not really remember what i have done.) Now whenever i plug in, it will bring my direct to Internet sharing.
I have tried going to Start> settings> connections> USB to PC and check on the box Ask me first about USB connection type when i connect the device via PC.
I have disable and restart and renable it and restart again and tried it. But still it bring me direct to the internet sharing tab.
I have also restore my sprite backup to 2 months back and it still give me the same thing. I was wondering what went wrong. I am very tempted to give it a hard reset and solve the problem.
Is anyone out there able to help? Is there supposed to be any registry settings that I can set to get back the Selection prompt?
Edited> Solved. I played around with the registry and found it works. I do not know it this will work for others who having the same problem
I tried removing all the keys inside HKLM/software/HTC/usbtopcpopup (of cos i did a backup of the registry) and restart the device but then it don work.
so I import back the original registry and try again and it still don work.
I realised that There is a key inside the folder which name OnlyTwoChoice and the value was 0, So i set to 1 and restart and voila this time i have 2 choices. Sync and Disk drive.
I then try setting the value to 2 this time and voila i get back all my 3 options. Tried plugin to my pc and syncing is working fine.
By the way I am using the original rom. Hope the above information helps.
Click to expand...
Click to collapse
sounds like you accidently told it to remember your decision....
but thanks for the registry tip

Many thanks, I had this problem and after trying lots of different things I decided to hard reset. I'm keeping this on my list...

You have made my day. Setting the value "OnlyTwoChoice" to 2 fixed it - thanks!

TrashX said:
You have made my day. Setting the value "OnlyTwoChoice" to 2 fixed it - thanks!
Click to expand...
Click to collapse
Great to hear that......!!!

Problem still occurs for me even after changing the values in the registry, whenever I connect my device to my pc, it will automatically install the Windows Mobile-based Internet Sharing Device, instead going for ActiveSync, even though I picked ActiveSync off the menu.
The Disk Drive option works however. Any ideas?

Thanks much! It's saved me hours!

Related

activesync will not run

i have tried several soft resets, hard resets, uninstalling activesync, reinstalling activesync and none of my computors will recognize my mogul. i have checked settings and for the life of me i can't seem to figure whats going on. can anyone please help?
Try this, go to:
Start > Settings > Connections tab > USB to PC
Uncheck "Enable advanced network functionality"
My VX6800 will not connect to Active Synch with this enabled. Hope it helps.
Ks.
same boat...
i have the same problem. uncked the advance network settings, no go.
have synced before.
now looks like pc doesnt even see ppc plugged in.
wierd cause usb will charge phone but no connection.
One other thing I had noticed on mine during all this was that once the phone was in this state I would have to manually stop Active Sync on the phone and then reconnect to the PC.
try deleting the activesync partnership on the phone (not the pc)
Where do you do that at?
wwillie said:
Where do you do that at?
Click to expand...
Click to collapse
In activesync under menu|options|delete
I don't know if this is relevant to your issue but I had the same problem however, I was connecting my phone to my PC via a USB hub. I connected great the first time and when I tried to connect the second time Active Sync on my PC would not find my phone. What I ended up doing was unplugging my printer from the USB port on my PC and plugging my phone directly into the PC and it found it fine. This also happened with a card reader I have. I guess what I'm trying to say is that if you aren't plugging your phone directly into the USB port on your PC that may be what's causing the problem.
i have looked in the activesync on my mogul and the options isnt bold face print. the options is empty. im at total loss. i call a sprint rep and they said it was the phone.
I had the same problem, it went away when I updated the ROM!
Active sync worked for a about a week, it would not connect so that I could install applications, albeit I could browse the device using the explorer function.
(all of the following failed: deleted active sync profiles, disabled firewall, reinstalled activesync, hard reset and tried to use sprite backup restore (for contacts, which failed))
qu1nn
quinn, how did u flash a new rom if u can't activesync?
Try everything here first:
http://forums.microsoft.com/windowsmobile/ShowPost.aspx?postid=2620369&siteid=65
Then try a hard reset before flashing.
still stuck
i read the microsoft forum and to be honest nothing there helped me. there was another person on there that had the same issue but no one there seemed to resolve it. has anyone found a workable solution? i have read in another forum that i would have to call sprint because it might be an issue with the phone. i would try that venue except my phone has been flashed to cricket. any suggestions?
I had the same problem after spending lotof time trying all the things already posted, I find a solution that worked for me I hope works for you
in your pc go to:
C:\Program Files\Microsoft ActiveSync
then find WCESMgr.exe right click in the mouse and doble click run as
then type your login and you should be able to get back your sync
hope it work sfor you
try this... http://forum.xda-developers.com/showthread.php?t=349997
I noticed that on Windows XP you have to uncheck the Enable advanced network functionality. If this does not resolve your problem Try plugging your phone into a different usb port on your computer. If this resolves your issue, You should consider deleting the phone from Device Manager. When you plug it in again it will reinstall the drivers and work.
On vista I have not experienced these issues. You can leave the Advanced network func checked.
Hope this helps,
DaWar
dawarrior_vex said:
I noticed that on Windows XP you have to uncheck the Enable advanced network functionality. If this does not resolve your problem Try plugging your phone into a different usb port on your computer. If this resolves your issue, You should consider deleting the phone from Device Manager. When you plug it in again it will reinstall the drivers and work.
On vista I have not experienced these issues. You can leave the Advanced network func checked.
Hope this helps,
DaWar
Click to expand...
Click to collapse
yo I did this on my mogul and my computer recognized it but as a hardware. IT said something like this:"htcusbplug" i installed it but it still doesnt open up activesync.
@ artenis: im having the exact same problem...wont recognize the device at all, even though it charges fine...(im running alex's wm6.1 beta 2 rom...could wm6.1 have something to do with it?)
i had the exact same issue with my sprint mogul, tired everything, formatted my laptop, reinstalled activesync, hard and soft reset the phone, tried other usb/computers, nothing. luckily i have sprints EPP and just took it to the store for a swap for a new mogul, got a new box and everything.. good luck
Same problem with Vista Ultimate 64bit
I had the same issue with my desktop, but after trying everything I could think of, decided to give Microsoft a try.
The drivers included in the pre-installed version of Windows Mobile Device Center would not allow the computer to recognize the Mogul, so I simply reinstalled the application from here: http://www.microsoft.com/windowsmobile/devicecenter.mspx
Everything works fine now.

Activesync won't explore phone

WM6 w/ Home, no other hacks that I can think of.
AS 4.5, WinXP
Just as the title says, when I tell it to explore the phone, it just goes to my C: drive on the PC.
I also have My Mobiler running, but it stopped working well before that. In fact, I don't think it's worked in several months, sometime shortly after I upgraded to WM6. Any solutions? Anything I add either has to be done by taking out the card and putting it in my PC, or adding to the 'to be synced' folder.
uninstall active sync and restart the computer then install active sync again. Make sure your device is disconnected during all this. If that doesnt solve it i would try backing up your phone using spb backup and try hard resetting it. The fact you can sync the folder shows that you have a connection. But is that my mobiler? Have you checked the settings options in active sync and made sure that allow connections via usb is selected?

[Q]ActiveSync 4.5 Synchronization cannot be completed successfully

Hi All,
I am new to ELF i.e. HTC touch
I was expecting somebody knows the solution for my problem
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting
below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I had restarted my device many time also I had reinstall
but as the relationship between PC and Mobile device is not identified
it will giving me above error.
i had tried to find out <PROGRAMS> then <FILE EXPLORER> then <WINDOWS> then to the <TEMP> folder but I didn;t find it out on my device. Please help me in this regards.
More interesting is when I connect my device to pc the ActiceSyc 4.5 start but not able to sync, pup up with above error.
but I can clikc on explore button on Activesyc window to navigate.
Please help urgent
cheer's
Sandi
Saisan said:
Hi All,
I am new to ELF i.e. HTC touch
I was expecting somebody knows the solution for my problem
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting
below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I had restarted my device many time also I had reinstall
but as the relationship between PC and Mobile device is not identified
it will giving me above error.
i had tried to find out <PROGRAMS> then <FILE EXPLORER> then <WINDOWS> then to the <TEMP> folder but I didn;t find it out on my device. Please help me in this regards.
More interesting is when I connect my device to pc the ActiceSyc 4.5 start but not able to sync, pup up with above error.
but I can clikc on explore button on Activesyc window to navigate.
Please help urgent
cheer's
Sandi
Click to expand...
Click to collapse
Any update on this....
urgent....
First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!
My bet is that you have a bad USB cable.
I have definitely seen the exact error messages and problems you describe with a HTC Universal.
number16 said:
First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!
Click to expand...
Click to collapse
Hi number 16,
Could you tell me where exactly are located the *pst. files? When I try to run scanpst.exe, it tells me to browse to the respective file, but I can't find it.
Thanks a lot.
The .pst file is the Outlook data file. Close outlook first, and right click on the icon to go to "Properties". From there you can see the location of your current .pst file location.
number16 said:
First of all, not being able to find your device is 'normal' ... until you've made an activesync connection, you won't see your device.
Now, for your activesync problem, do you see an error code? Like 80004005 or 80006007?
It's a pretty common problem for activesync, but from my experience it seems to pop its ugly head a lot more often for WM6 devices than the older OS, like the 'tried and tested' WM2003SE platform.
There could be many causes for this. I'd suggest going through the following steps to try to fix it:
1. Disable all the items under Option (calender, contacts, notes, everything) and see if it can be connected via Activesync. If it can't, you're really screwed ... go to step 5
2. Disconnect your phone, and close Outlook on your PC. Now find scanpst.exe on your PC (installed with Outlook) and run it to scan and fix your .pst file.
3. Re-connect your phone, now add the options 1 by 1. I'd start with Notes, then contacts and calender. See if running scanpst.exe fixes the problem. If you're luck, you could be out of the woods by now.
4. If you get the same error after adding a particular item in option, that help you isolate where the problem is. Look at the entries in that item (calender, contact, notes etc) and see if there's anything that casues the problem. Relocate the items if necessary and add them 1 by 1.
5. If everything fails, or if you don't even care about the programs you've installed on the phone, just do a hard-reset (hold down green + red button at the same time, poke the reset button while still holding down the buttons, and press "select" when the messge appears on screen) and connect the phone to the PC and see if it syncs. If your phone can't even sync fresh after a hard-reset, send the phone back for repair.
I know from my experience, moving the contacts and adding them 1 by 1 got me out of the woods 1 time, and the other time I had to do a hard-reset ... good thing I backup my device weekly.
Good luck!
Click to expand...
Click to collapse
Hi number16
Thanks for your suggestions but I had already tried steps #1 to # 4. After that I had deleted all the relationship.
Now at present I don’t have any relationship for my device to PC.(When I had plug-in my device and tried to sync through ActiveSyc 4.5 it will show me Guest or new name for relationship.)
On some different forum they have some kind of problem there it was suggested to delete the Windows/ Temp folders files so that it will resolve the above problem.
Any think else you would like to suggest.
Hope somebody help me..
Cheer's
Sandi
leondaphillips said:
My bet is that you have a bad USB cable.
I have definitely seen the exact error messages and problems you describe with a HTC Universal.
Click to expand...
Click to collapse
Hi
As I connect my device to PC ActiveSyc was automaticly runs and tried to get relationship but unfortunatly not able to sync.
I am sure my USB Cable is in good condition because I am able to transfer files from Device to PC or vise verse.
any thing else you would like to suggest.
Sandi
Saisan said:
Hi
As I connect my device to PC ActiveSyc was automaticly runs and tried to get relationship but unfortunatly not able to sync.
I am sure my USB Cable is in good condition because I am able to transfer files from Device to PC or vise verse.
any thing else you would like to suggest.
Sandi
Click to expand...
Click to collapse
Have you *tried* another USB cable?
(I know, I know... but a cable that fails to sync can transmit data, I have seen this - it is strange but true).
Also
you may inadvertently have disabled a network connection on your PC. If you connect you should see a network icon showing like it is trying to obtain an ip address. If you disable that by accident it can also prevent connections but I still think you should try a new cable then check your network connections
Yours
Leon
leondaphillips said:
Have you *tried* another USB cable?
(I know, I know... but a cable that fails to sync can transmit data, I have seen this - it is strange but true).
Also
you may inadvertently have disabled a network connection on your PC. If you connect you should see a network icon showing like it is trying to obtain an ip address. If you disable that by accident it can also prevent connections but I still think you should try a new cable then check your network connections
Yours
Leon
Click to expand...
Click to collapse
leondaphillips;
It is something Strange!!! well I will try out this solution hope it will work.
I will let you know in same post.
Cheer's
Sandi
hey i had this problem, turns out my firewall was blocking it, try turning off your firewall.....
Saisan said:
leondaphillips;
It is something Strange!!! well I will try out this solution hope it will work.
I will let you know in same post.
Cheer's
Sandi
Click to expand...
Click to collapse
Hi leondaphillips
I had tried to connect my device with new*** USB Cable.
but same thing happened it was showing same error message.
Also can;t create relationship.
help is required urently
Sandi
cones said:
hey i had this problem, turns out my firewall was blocking it, try turning off your firewall.....
Click to expand...
Click to collapse
hi cones
I had checked with Windows Firewall it shows me status OFF.
Is there were anything else I need to check?
what you exactly did when you have this problem? how it resolved can you explain on this?
Waiting for your post.
Sandi
Hey Sandi!
Have you tried unchecking the option under Settings\(System or Connection)\Usb to PC ?
Also, have you looked the pins of the miniUSB port? Are they in good shape?
Regards!
kokotas said:
Hey Sandi!
Have you tried unchecking the option under Settings\(System or Connection)\Usb to PC ?
Also, have you looked the pins of the miniUSB port? Are they in good shape?
Regards!
Click to expand...
Click to collapse
Hi kokotas
Thanks for your reply.
well I had checked below things.
under Settings\(System or Connection)\Usb to PC = checked status.
I had took new *** USB Cable*** and tried to reconect but it won;t work out.
now I am worried I am unable to syn my device to my PC.
Uregent help required.
Sandi
1. Try:
Under Settings\(System or Connection)\Usb to PC = UNCHECKED status.
2. So you've tried a new cable and nothing changed! But I told you about the miniUSB port in your phone! Do you see any broken, twisted pins in there? I'm telling you this because I had my phone's pins broken and I have no connectivity via usb anymore!
Regards!
One final thought
Hi Saisan
I would counsel that you should try another PC first.
Next step:
Unplug your device...
Uninstall Activesync, remove the registry keys for the program and reboot. Download the latest release of ActiveSync and install that.
I would also suggest you could do worse than enable "SHOW_HIDDEN_DEVICES" in device manager and remove all greyed out items under USB in device manager (WITH YOUR DEVICE NOT ATTACHED) then reboot and reconnect your device.
Failing that you probably have either a connectivity issue (physical cables or connectors) or you have a logical connection issue (I think there is a possiblity that you have inadvertantly disabled a network connection).
When you connect a WM6 device it creates a new network connection which generally appears in the system tray. If you disable this (right click disable) active sync will stop working.
If you go into your network connections folder and re-enable any items that are disabled it should work. PROVIDED YOU HAVE TURNED OFF WINDOWS FIREWALL FIRST...
It does sound like a physical cable or connection problem though.
Hope that helps
Yours
Leon
kokotas said:
1. Try:
Under Settings\(System or Connection)\Usb to PC = UNCHECKED status.
2. So you've tried a new cable and nothing changed! But I told you about the miniUSB port in your phone! Do you see any broken, twisted pins in there? I'm telling you this because I had my phone's pins broken and I have no connectivity via usb anymore!
Regards!
Click to expand...
Click to collapse
hi kokotas
I had goen throught the steps:
Under Settings\(System or Connection)\Usb to PC = unchecked.
and checked the pins are not broken and twisted but unfortunatly it is giveing me same error.
I think I will rediscribe my issue. I am able connect my device but unable to syncronize it .
Problem: I have HTC Touch (Black one) P3450 from last few days while I
connect my device to PC i am getting below error message.
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
I hope now it was clear.
Cheer's
Sandi
leondaphillips said:
Hi Saisan
I would counsel that you should try another PC first.
Next step:
Unplug your device...
Uninstall Activesync, remove the registry keys for the program and reboot. Download the latest release of ActiveSync and install that.
I would also suggest you could do worse than enable "SHOW_HIDDEN_DEVICES" in device manager and remove all greyed out items under USB in device manager (WITH YOUR DEVICE NOT ATTACHED) then reboot and reconnect your device.
Failing that you probably have either a connectivity issue (physical cables or connectors) or you have a logical connection issue (I think there is a possiblity that you have inadvertantly disabled a network connection).
When you connect a WM6 device it creates a new network connection which generally appears in the system tray. If you disable this (right click disable) active sync will stop working.
If you go into your network connections folder and re-enable any items that are disabled it should work. PROVIDED YOU HAVE TURNED OFF WINDOWS FIREWALL FIRST...
It does sound like a physical cable or connection problem though.
Hope that helps
Yours
Leon
Click to expand...
Click to collapse
Hi leon
Thanks for your advice. but I had tried this think already.
I had reinstalled Activesync 4.5 on new machine and tried to get sync.
I think there were some logical connection issue on which I am unable to create the relationship with my device from PC.
I had also tried to delete all the pervious relationship's and reconnected the same.
On some other forum it was suggested to delete the files from Windows/Temp directory from Device. but in HTC Touch when I connect the device it will automatically start activesync and it was connected but not sync.
shows message:
error: "Synchronization cannot be completed successfully. Reconnect
your device and try again. If the problem persists, see the Microsoft
ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop
computer."
please help in this regards.
Cheer's
Sandi
Hi Sandi,
Have you found a solution yet?
I've been facing the same problem for sometime now. Additionally, all files on my touch have become read-only. I can't copy, move or delete any files on the phone.

Activesync 4.5 Problem: won't connect to my device anymore

so i thought i'd give vista's "windows mobile device center" a try on my vista laptop, and wasn't surprised to find that i couldn't get it to recognize my phone. i was surprised to find that the xp computer that i've been using with activesync for a long time suddenly stopped recognizing my phone as well.
up to now i've hard reset phone (dcd 3.04, 3.37 radio) and reinstalled activesync 4.5. no dice. please if anyone can help me troubleshoot this thing i'd be way grateful. why has my phone stopped communicating with my computers?
For WM 6 devices, on Vista you must upgrade to Windows Mobile Device Center 6.1.
i downloaded and used 6.1 on my vista machine, but it didn't work. any other ideas? i think there may be something that changed on the phone, because now, activesync won't work either...
...bytheway, the phone will charge when plugged into either, but that's about it.
...bytheway, the phone will charge when plugged into either, but that's about it.
Click to expand...
Click to collapse
Just for ****s and giggles, have you tried the following:
1. Using a different usb port
2. Blowing the dust out of the port on the phone
3. Using the Y adapter that came with the phone in between the sync cable and the phone
First, plug into the USB, wait for the Windows new device chime, see if anything occurs in the WM Activesync.. If no Activesync connection is made (after the 'connecting' has stopped) then unplug and plug in back in another USB port. Do that at least 4 times (cycling between ports...even the same may eventually work) to see if you have a success.
Restart your PC, Soft-rest your phone and try again.
If still nothing, then don't bother plugging your phone in and then Run As An Administrator the attached batch file and then under View 'Show Hidden Devices.' You'll now see all devices that have ever been installed and retained for your OS, with the faded devices as those not currently attached/active.
Rather than the batch file you can open up a Command Promp Window with Administrator access (Start\Programs\Accessories\Right Click on Command Prompt and Run As An Administrator)
(I usually keep that batch file accessible in the root of my OS partition, just to keep it easy to clean out legacy device drivers that can cause problems.[/i])
Enter:
set devmgr_show_nonpresent_devices=1
start devmgmt.msc
Uninstall
Network adapters\Microsoft Windows Remote Adapter
Portable Devices\PocketPC
Then under Programs & Settings uninstall the Windows Mobile Device Center upgrade, and then reboot your PC. Reinstal that Device Center 6.1 update and then again connect your phone with the USB. (for the XP machine you can do all of the and unistall/reboot/reinstall the ActiveSync 4.5.
(note to self or another.....these steps to be added to the Wiki for ActiveSyn issues)
well, i'm thinking that the "****s and giggles" have it. i blew into the port, plugged her in, and it connected to my xp machine, just like days of old. after about 3 minutes though, the connection dropped, and i've not been able to get it going again since. i think this rules out any software/settings problem, and looks like it's a hardware issue. i'll try cleaning it one more time a little later, and if no go, i'll have to figure a way to re-flash the stock rom (i only have a 6gb card...) and send the beast back. thanx for the input, guys (specially keystone, dang man that was one badass post with some instructions that will help someone, i'm sure.)
Do you have the Y adapter that came with the phone? The one with the audio jack and the 5 pin mini usb on one end and the 11 pin mini usb on the other? The reason I ask is because for some reason HTC decided to put an 11 pin mini usb connector on our phones, yet supply us with a data cable that's standard 5 pin mini usb. If you have it, just humor me and try it and see if it keeps the connection.
Oh and P.S....the "****s and giggles" wasn't just a shot in the dark. I've solved many activesync problems for people before using all 3.
I actually hadn't used the cord without the Y-adapter untill today. both ways yeild the same result.
Another Activesync problem
I've been on vacation the last week and while away i had to do a clear storage..anyway, my phone was fine but when i connect thru activesync i get an error code : 85010014 and my contacts list doesnt get updated...:S can anyone out there give me some advice or do i hafto start from scratch?
Also is there a way to find my contacts on my comp?
jinx01 said:
so i thought i'd give vista's "windows mobile device center" a try on my vista laptop, and wasn't surprised to find that i couldn't get it to recognize my phone. i was surprised to find that the xp computer that i've been using with activesync for a long time suddenly stopped recognizing my phone as well.
up to now i've hard reset phone (dcd 3.04, 3.37 radio) and reinstalled activesync 4.5. no dice. please if anyone can help me troubleshoot this thing i'd be way grateful. why has my phone stopped communicating with my computers?
Click to expand...
Click to collapse
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Damn! That was simple. I unchecked the "Enabe advanced network functionality" box and I'm up and running! I'll save the hoops for later. Thanks!
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
This is the fix almost 90% of the time......
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
Worked for me. Thanks!
ok ive tried all except the hidden devices thing (gonna try it now) and no go will post if it works oh im on DCD's 3.2.6 rom and the 6.1 of device center and i dont think it has anything to do with it but i just installed 2007 outlook
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
Hi, thanks that work for me fine too
my mogul has been giving me crap with vista and xp for weeks. Nothing can solve it. I've re-flashed, downgraded, used different ports, different cables, modified the USB to PC settings.
Add this to the list of things that randomly seem to be a problem for this phone.
I had a similar situation, none of the software based suggestions fixed it. Wiggling the cord around would sometimes connect, but soon thereafter, my phone stopped charging. The USB port was the culprit, so be careful.
I'm sure everyone who was having troubles figured out solutions, just thought I'd add in my dealings with this.
I just had the phone activated today (yes I bought used) and brought it to work to sync with my work outlook, well the usb cord would charge the phone but give me nothing but errors in the way of actual data connection. I was a little bummed this afternoon thinking I bought a partially broken phone. But WHILE HAVING THE PHONE CONNECTED ( I bold because I had done this multiple times while not connected and had no results) I opened the Comm Manager and clicked on the sync button at the bottom, suddenly my computer could recognize my device and I was sync'ing like a mad man.
Very possibly a stupid thing I should have done from the start, but I don't know any better since I'm brand new to all of this. I only post in hopes of helping another bummed out soul as was myself
I an running a HTC TyTN-II 4550 phone (WinMo 6.1) on a desktop PC (WinXP).
I couldn't get Activesync 4.5 to work either, but there were obvious reasons--my version of Office 2000 isn't supported (2003 is the earliest, I think) and IE and Outlook are not set as my default mail clients (-and that's how I like it-).
I didn't really need Activesync but I did want to be able to get files on and off the phone from my desktop PC through the USB cable. When I'd connect the phone, Activesync would automatically start up and spin the little logo for a while and then say "connection couldn't be made" and then I couldn't do anything--even move files on and off the phone.
What I found works is this:
1) open the Task Manager, and kill the wcescomm.exe process.
2) navigate to the folder that Activesync is installed in, and run the file named WCESMgr.exe.
3) that will popup a window, asking if you want to sync, or cancel. Press [cancel]
4) the normal Activesync window will come up, and the choices for "Sync" and "Schedule" will be greyed out, but the "Explore" button should work.
Sometimes I can disconnect and reconnect the phone without going through steps #1-#4, but not always.
With the "Explore" window you can drag files on and off the device.
I tried dragging small Word and Excel docs on and off; both converted properly when dragged onto the phone, but only the Word file would convert again when dragged off.
The phone will access the internet through the USB when hooked up this way, also.

ActiveSync/PCtoUSB Problems

Hey guys,
i've got a very big problem.
I dont know why but every time i connect my Blackstone to the Computer it always open the "Internet Sharing" thing. Ive changed it over "Settings" back to Sync (and in settings/connections/USB to PC, check "Ask me first about USB connection type when I connect the device to the PC" also), but no change.
Then i canged in the registry the following key "HKLM\Software\HTC\USBToPCPopUP\" DWORD: OnlyTwoChoice=1
now the HTC Popup with the option "Sync" and "HDD" show up, but when i choose Sync it doesent connect and sync.
I want my three Options back and want the option that i can choose out of "Sync" "HDD" and "Internet Sharing"
Thank you
greetz
I started getting this problem when I used the Internet Sharing option for the first time. From then on it would automatically try IS instead of Activesysnc, no matter what I did.
I solved it by unticking the Enable faster data syncronization box in USB to PC tab, but this results in a clunky pile of tabs that come up when connecting to the PC.
Unticking the "Enable faster data syncronization" box in USB to PC tab, doesent solve the problem
Hello
I got the same problem where I did not get the "3 choices" screen while connecting to usb, and IS by default...
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
and it went back to normal....
Hope it will the same for you..
I have the same problem since a while, but haven't found a solution yet... starting to get a little desperate...
dapezzz said:
Hello
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
Click to expand...
Click to collapse
I guess you mean the registry on the device itself?
I been looking for that, but it looks i don't have this //HKLM\Software\HTC\USBToPCPopUP\...
in fact, i'm facing the exact same problem as described in this htcforum.com post:
"http://www.htcforums.com/post5958.html#p5958" (yes, i posted there too )
i'm pretty sure the problem is NOT pc-related, the data-connection fails at every possible system i tested it with (ranging from xp to vista to ubuntu to osX), at least the usb-diskmode worked before on all these systems before... not anymore...
the answer of HTC support wasn't of much help either:
Dear valued HTC customer, Thank you for contacting our Customer Support Center. We are dedicated to providing you with the best quality service and answering all of your questions and concerns. You recently wrote us about an issue that you have encountered with your device. To clarify your issue, you stated that you were unable to connect your device to the PC. . For this you will need a full version of Microsoft Outlook 2003 or newer and Microsoft Activesync for Windows XP or Windows Mobile Device Centre for Vista. Once these are installed simply connect your device to your PC and it will transfer your details to your PC. I hope this is of help to you. If you need any further help we recommend calling for a direct guidance on these steps for synchronising. If the above steps do not resolve your issue, we invite you to visit the support area on our Web site.
Click to expand...
Click to collapse
i suspect them of not even reading about my problem, and just firing some default answer back... not really helpfull.
so i keep looking around for possible solutions for now.
I'm seriously thinking to make use of the warranty, but hate to lose the device for a long periode... anybody has experience with that?
another PCtoUSB problem, i get all 3 options, HDD and Internet Work perfectly, ActiveSync however doesn't. Vista recognizes it as a USB Pocket PC, but Vista Sync Center and WMDC do not, nothing. On HTC i get the charging icon, but not the Sync icon. Also in the ActiveSync --> Connections menu i have "Sync all PCs using this connection:" ticked, however the drop down menu is empty, nothing to select.
in the ActiveSync start screen there's just the fake Microsoft Exchange account, nothing else
Everything was working fine till few days ago :/
dapezzz said:
Hello
I got the same problem where I did not get the "3 choices" screen while connecting to usb, and IS by default...
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
and it went back to normal....
Hope it will the same for you..
Click to expand...
Click to collapse
I tried this but still get ICS opening when I connect my device up. It is driving me mad now trying to sort this - I may even resort to a hard reset before the end of the weekend.
The only way I can get sync to work is to disable the faster data sync option.
hmm, every system i test with gives the same result:
the htc device does charge, but the usb data-connection never works...
could it be a faulty connector?
http://forum.xda-developers.com/showthread.php?p=3764541#post3764541
I have the same problem and the above method solves the problem
Hope it helps.

Categories

Resources