Windows Mobile SendSMS - Windows Mobile Development and Hacking General

I'm trying to send out a generic message using SENDSMS function in Windows Mobile Sample Code but I am unsuccessful. Here is a copy of the code
Code:
// ***************************************************************************
// Function Name: SendSMS
//
// Purpose: Send an SMS Message
//
// Arguments: none
//
// Return Values: none
//
// Description:
// Called after everything has been set up, this function merely opens an
// SMS_HANDLE and tries to send the SMS Message.
void SendSMS(BOOL bSendConfirmation, BOOL bUseDefaultSMSC, LPCTSTR lpszSMSC, LPCTSTR lpszRecipient, LPCTSTR lpszMessage)
{
SMS_HANDLE smshHandle;
SMS_ADDRESS smsaSource;
SMS_ADDRESS smsaDestination;
TEXT_PROVIDER_SPECIFIC_DATA tpsd;
SMS_MESSAGE_ID smsmidMessageID;
// try to open an SMS Handle
if(FAILED(SmsOpen(SMS_MSGTYPE_TEXT, SMS_MODE_SEND, &smshHandle, NULL)))
{
MessageBox(NULL,
(LPCTSTR)LoadString(ghInstance, IDS_ERROR_SMSOPEN, 0, 0),
(LPCTSTR)LoadString(ghInstance, IDS_CAPTION_ERROR, 0, 0),
MB_OK | MB_ICONERROR);
return;
}
// Create the source address
if(!bUseDefaultSMSC)
{
smsaSource.smsatAddressType = SMSAT_INTERNATIONAL;
_tcsncpy(smsaSource.ptsAddress, lpszSMSC, SMS_MAX_ADDRESS_LENGTH);
}
// Create the destination address
smsaDestination.smsatAddressType = SMSAT_INTERNATIONAL;
_tcsncpy(smsaDestination.ptsAddress, lpszRecipient, SMS_MAX_ADDRESS_LENGTH);
// Set up provider specific data
memset(&tpsd, 0, sizeof(tpsd));
tpsd.dwMessageOptions = bSendConfirmation ? PS_MESSAGE_OPTION_STATUSREPORT : PS_MESSAGE_OPTION_NONE;
tpsd.psMessageClass = PS_MESSAGE_CLASS1;
tpsd.psReplaceOption = PSRO_NONE;
tpsd.dwHeaderDataSize = 0;
// Send the message, indicating success or failure
if(SUCCEEDED(SmsSendMessage(smshHandle, ((bUseDefaultSMSC) ? NULL : &smsaSource),
&smsaDestination, NULL, (PBYTE) lpszMessage,
_tcslen(lpszMessage) * sizeof(TCHAR), (PBYTE) &tpsd,
sizeof(TEXT_PROVIDER_SPECIFIC_DATA), SMSDE_OPTIMAL,
SMS_OPTION_DELIVERY_NONE, &smsmidMessageID)))
{
MessageBox(NULL,
(LPCTSTR)LoadString(ghInstance, IDS_SMSSENT, 0, 0),
(LPCTSTR)LoadString(ghInstance, IDS_CAPTION_SUCCESS, 0, 0),
MB_OK);
}
else
{
MessageBox(NULL,
(LPCTSTR)LoadString(ghInstance, IDS_ERROR_SMSSEND, 0, 0),
(LPCTSTR)LoadString(ghInstance, IDS_CAPTION_ERROR, 0, 0),
MB_OK | MB_ICONERROR);
}
// clean up
VERIFY(SUCCEEDED(SmsClose(smshHandle)));
}
Again, I am trying to explicitly specify the recipient and the message being sent which are variables LPCTSTR lpszRecipient and LPCTSTR lpszMessage. Every time I assign them a string value, I get an error. Does anybody know a solution?

Not sure
Not too sure what you are trying to achieve here, as Vijay already has an SMSSend app, which is command line driven and works a treat. Would hate for you to reinvent the wheel - check his tools out: http://www.vijay555.com/?Releases:VJPhoneTools

Related

lineSetAppPriority doesn't seem to work...

For the program I posted here, I want to handle incoming calls before the default popup appears (to replace the ringtone).
Currently, my tool seems to be quick enough without lineSetAppPriority in most cases, but sadly not in all...
I was using the following code: (currently removed again, because it didn't work and even caused some troubles...)
Initialization:
Code:
if ( lineInitialize( &LineApp, theApp.m_hInstance, LineCallback,
theApp.m_pszAppName, &LineHandleCount ) == 0 )
{
LineHandles = new HLINE[LineHandleCount];
for(DWORD i = 0; i < LineHandleCount; i++)
{
if ( lineNegotiateAPIVersion( LineApp, i, 0x00010000, 0x00020000,
&ver, &extensionID ) == 0 )
{
rc = lineOpen( LineApp, i, &LineHandles[i], ver, 0, (DWORD)this,
LINECALLPRIVILEGE_MONITOR|LINECALLPRIVILEGE_OWNER,
LINEMEDIAMODE_INTERACTIVEVOICE, NULL );
if ( rc < 0 )
LineHandles[i] = NULL;
else
if ( LineHandleSignal == NULL )
LineHandleSignal = LineHandles[i];
}
}
HRESULT res = lineSetAppPriority( theApp.m_pszAppName,
LINEMEDIAMODE_INTERACTIVEVOICE,
NULL,
LINEREQUESTMODE_MAKECALL,
NULL, 1 );
}
Callback:
Code:
VOID FAR PASCAL LineCallback( DWORD hDevice,
DWORD dwMsg,
DWORD dwCallbackInstance,
DWORD dwParam1,
DWORD dwParam2,
DWORD dwParam3
)
{
if ( dwMsg == LINE_CALLSTATE )
{
LINECALLINFO *callInfo = (LINECALLINFO *)calloc(sizeof(LINECALLINFO)
+1024, 1);
callInfo->dwTotalSize = sizeof(LINECALLINFO)+1024;
lineGetCallInfo( (HCALL)hDevice, callInfo );
// different stuff...
HRESULT res;
// Remove from priority list, so lineHandoff will run the default
// call window
res = lineSetAppPriority( theApp.m_pszAppName,
LINEMEDIAMODE_INTERACTIVEVOICE, NULL,
LINEREQUESTMODE_MEDIACALL, NULL, 0 );
// Forward event to next instance (usually Windows' phone app)
lineHandoff( (HCALL)hDevice, NULL, callInfo->dwMediaMode );
// Set to top priority again
res = lineSetAppPriority( theApp.m_pszAppName,
LINEMEDIAMODE_INTERACTIVEVOICE, NULL,
LINEREQUESTMODE_MEDIACALL, NULL, 1 );
}
lineSetAppPriorty returns OK in all cases. But when a call comes in, the
default bubble applears simultaneously with the callback function. I
wanted it to be shown when I do the lineHandoff...
What am I doing wrong?
TIA,
Mirko
I used lineSetAppPriority too, with same result....
I think there is one way.....kill cprog

RAPI problem writing registry key value

I am presently writing a RegEdit program to run on my PC and allow editing of the registry on the connected PPC. I have got to the point where I can read the entire registry and I am now implementing function to update the registry i.e. insert new key, delete key, add new Key Values etc...
The problem I have at the moment is trying to add a new value to an existing key. The function I have written so far to do this is as follows, but the call to CeRegSetValueEx(...) returns an error code 5!
Code:
//-----------------------------------------------------------------------------------
// Adds a new key value into the registry.
// // TO DO - add the data
int CRegEditDoc::AddNewKeyValue(HTREEITEM hParent, HKEY hRoot, LPTSTR lpszKey, LPTSTR lpszValueName, DWORD dwType)
{
USES_CONVERSION;
int nItem, rc;
HKEY hKey;
LPWSTR lpwszKey = T2W(lpszKey);
LPWSTR lpwszValueName = T2W(lpszValueName);
try
{
if (lstrlen (lpszKey))
{
if (m_rapi.CeRegOpenKeyEx (hRoot, lpwszKey, 0, 0, &hKey) != ERROR_SUCCESS)
{
return 0;
}
}
else
{
hKey = hRoot;
}
CString strValue = "my data";
LPWSTR lpwszData = T2W(strValue);
DWORD length = dim(lpwszData);
nItem = m_pRightView->GetListCtrl().GetItemCount();
if (m_rapi.CeRegSetValueEx(hKey, lpwszValueName, 0, dwType, (LPBYTE)lpwszData, length*2) != ERROR_SUCCESS) // last 2 lpData, szie in bytes of data.
{
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
return 0;
}
}
catch (CException* e)
{
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
CString errorMsg = _T("Error in: CRegEditDoc::AddNewKeyValue: ");
errorMsg += szCause;
AfxMessageBox(errorMsg);
e->Delete();
}
return 1;
}
I would appreciate a little advise on the matter, as this is the first time I have used the RAPI.
Thanks.
Hi VZ800!
The error you're getting is 'access denied'. In WM5 many RAPI functions (including writing to registry) are blocked for security reasons. Your only choice is to use a dll with CeRapiInvoke functions, but it needs to be deployed through a special cab.
You can read about this on msdn.
By the way, the app you're writing already exists, and it has the same problem.
Good luck!
Thanks for the advice. Since my post I have found that my code works for the HKEY_LOCAL_MACHINE, "/Software".
I will investigate the issue you have pointed me to.
Actually, your code should work for the entire HKEY_CLASSES_ROOT as well. MS decided to block only certain 'sensitive' parts of the registry so they can not be corrupted from the outside by malicious software.
If you noticed, MS's own remote registry editor works through DLLs (a ton of them).
Any way, I skimped on words in my first post, since I was writing it on a bus, and while I love my Jamin, writing long text on it is not very enjoyable.
Let me elaborate on CeRapiInvoke:
It's a function you call on the PC side that receives a DLL name and a function name (in that DLL) as parameters and calls that function on the device. It also lets you transfer buffers of data to and from the called function.
It's a great way to communicate with a PPC device without using sockets. You can write the device side DLL to do what ever you wont (like access protected registry) and report back to the PC.
The only drawback is in WM5 this DLL has to be registered and have a 'system' file attribute set. That's why you have to deploy it by cab.
Like I said before it's all in the MSDN.
Hope this helps.
Thanks. I have read the articles (and printed them) about RAPI Restricted Mode Security etc... http://msdn.microsoft.com/library/d...5/html/wce51conRAPIRestrictedModeSecurity.asp and will write a DLL to go on the PPC which will be installed via CAB etc...
I updated the function to add a new value anyway. Rather than calling the RAPI functions for the registry CeRapi... I will call my own functions in my authorised DLL.
Code:
//-----------------------------------------------------------------------------------
// Adds a new key value into the registry.
//
int CRegEditDoc::AddNewKeyValue(HTREEITEM hParent, HKEY hRoot, LPTSTR lpszKey,
LPTSTR lpszValName, DWORD dwDType, LPBYTE lpData)
{
USES_CONVERSION;
HKEY hKey;
LPWSTR lpwszKey = T2W(lpszKey);
LPWSTR lpwszValName = T2W(lpszValName);
DWORD dwDSize = sizeof(lpData);
try
{
if (lstrlen(lpszKey))
{
if (m_rapi.CeRegOpenKeyEx (hRoot, lpwszKey, 0, 0, &hKey) != ERROR_SUCCESS)
{
return 0;
}
}
else
{
hKey = hRoot;
}
// Check if valuename already exists. Should never happen, but just in case.
if (m_rapi.CeRegQueryValueEx(hKey, lpwszValName, 0, &dwDType, NULL, &dwDSize) == ERROR_SUCCESS)
{
AfxMessageBox(_T("Value of this name already exists!"));
return 0;
}
if (m_rapi.CeRegSetValueEx(hKey, lpwszValName, 0, dwDType, lpData, dwDSize) != ERROR_SUCCESS)
{
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
AfxMessageBox(_T("Unable to create new value for this key!\nPlease check access rights."));
return 0;
}
}
catch (CException* e)
{
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
CString errorMsg = _T("Error in: CRegEditDoc::AddNewKeyValue: ");
errorMsg += szCause;
AfxMessageBox(errorMsg);
e->Delete();
}
return 1;
}
A question on using the CeRapiInvoke function. Obviously my function that I will be invoking in my DLL will need to conform to the following footprint:
Code:
LPCWSTR, LPCWSTR, DWORD, BYTE*, DWORD*, BYTE**, IRAPIStream**, DWORD
What I would like to know is this: If I want my function to be a wrapper to say the
Code:
CeRegQueryValueEx(HKEY, LPWSTR, LPDWORD, LPDWORD, LPBYTE, LPDWORD)
function, how do I parse the function args? Please suggest how I would pack them into a BYTE* for the pInput parameter.
Actually, you got it a bit wrong:
Code:
FuncName(DWORD cbInput, BYTE *pInput, DWORD *pcbOutput, BYTE **ppOutput, IRAPIStream *ppIRAPIStream);
The prototype you specified is for the PC side (the first two strings are DLL name and function name);
I use the following parsing method:
Code:
BYTE* curInputPos = pInput;
memcpy((BYTE*)&hKey, curInputPos, sizeof(HKEY));
curInputPos += sizeof(HKEY);
memcpy((BYTE*)&dwIndex, curInputPos, sizeof(DWORD));
curInputPos += sizeof(DWORD);
memcpy((BYTE*)&Reserved, curInputPos, sizeof(DWORD));
curInputPos += sizeof(DWORD);
It works fine both ways.
Just don't forget to use LocalAlloc for inBuffer and LocalFree for outBuffer.
Thanks. I'll let you know how I get on.
So if I were to parse an HKEY and an LPTSTR accross I would do the following to put the data into a BYTE array:
Code:
DWORD dwIn, dwOut;
LPBYTE pInput;
PDWORD pOut;
dwIn = sizeof(HKEY) + (strlen(lpszKey)*sizeof(TCHAR));
pInput = (BYTE*)(LocalAlloc(LPTR, dwIn));
memcpy(pInput, (BYTE*)&hKey, sizeof(HKEY));
pInput += sizeof(HKEY);
memcpy(pInput, (BYTE*)&lpszKey, strlen(lpszKey)*sizeof(TCHAR));
// move pointer back to begining.
pInput -= sizeof(HKEY);
Basically, yes but with two reservations:
1) I recommend using a different pointer for the current position in buffer, to avoid errors.
2) you need to put the string length in the byte array before the string, otherwise you won't know it's length on the device side. Alternatively, you have to add 1 to the length so the 0 byte at the end gets packed and you can use strlen on the device.
Also keep in mined that unless you define the PC side project to work with UNICODE libraries, THCHAR will be defined as char, while on the device it's always WCHAR.
I really apreciate your help. I still can't get my DLL function to work I keep getting error 1064!
This is my code for the DLL named REditSvr.dll:
Code:
#include <windows.h>
#ifdef __cplusplus
extern "C"
{
#endif
__declspec (dllexport) INT RegEditDeleteValue (DWORD cbInput, BYTE* pInput, DWORD* pcbOutput, BYTE** ppOutput, PVOID reserved);
#ifdef __cplusplus
}
#endif
BOOL WINAPI DllMain (HANDLE hinstDLL, DWORD dwReason, LPVOID lpvReserved)
{
return TRUE;
}
INT RegEditDeleteValue (DWORD cbInput, BYTE* pInput, DWORD* pcbOutput, BYTE** ppOutput, PVOID reserved)
{
INT rc = 0;
BYTE* curInputPos = pInput;
HKEY hKey;
DWORD dwLength;
// Copy args out of input buffer.
memcpy((BYTE*)&hKey, curInputPos, sizeof(HKEY));
curInputPos += sizeof(HKEY);
memcpy((BYTE*)&dwLength, curInputPos, sizeof(DWORD));
curInputPos += sizeof(DWORD);
// Allocate enough memory for local wchar.
LPWSTR lpszValueName = (WCHAR*)malloc(dwLength);
memcpy((BYTE*)&lpszValueName, curInputPos, sizeof(dwLength));
curInputPos += sizeof(dwLength);
// Do the registry delete.
rc = RegDeleteValue(hKey, lpszValueName);
// Allocate memory for the return buffer.
BYTE* pOutput = (BYTE*)LocalAlloc(LPTR, sizeof(long));
memcpy(pOutput, (BYTE*)rc, sizeof(long));
*ppOutput = pOutput;
*pcbOutput = sizeof(long);
// Free input buffer.
LocalFree(pInput);
// Free WCHAR
free(lpszValueName);
return GetLastError();
}
and this is the code in my PC application which invokes the above function (or I would hope it did):
Code:
//-----------------------------------------------------------------------------------
// Deletes the key value from the registry.
//
int CRegEditDoc::DeleteKeyValue(HKEY hRoot, LPCTSTR lpszKey, LPCTSTR lpszValName)
{
USES_CONVERSION;
HKEY hKey;
LPWSTR lpwszKey = T2W(lpszKey);
LPWSTR lpwszValName = T2W(lpszValName);
try
{
if (lstrlen(lpszKey))
{
if (m_rapi.CeRegOpenKeyEx (hRoot, lpwszKey, 0, 0, &hKey) != ERROR_SUCCESS)
{
return 0;
}
}
else
{
hKey = hRoot;
}
/* if (m_rapi.CeRegDeleteValue(hKey, lpwszValName) != ERROR_SUCCESS)
{
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
AfxMessageBox(_T("Unable to delete value for this key!\nPlease check access rights."));
return 0;
}
*/
// Testing remote registry value deletion.
DWORD dwIn, dwOut;
LPBYTE pInput, pCurInputPos;
PDWORD pOut;
DWORD dwLength = wcslen(lpwszValName)*sizeof(WCHAR);
dwIn = sizeof(HKEY) + dwLength;
pInput = (BYTE*)(LocalAlloc(LPTR, dwIn));
pCurInputPos = pInput;
memcpy(pCurInputPos, (BYTE*)&hKey, sizeof(HKEY));
pCurInputPos += sizeof(HKEY);
// Store the length of the string
memcpy(pCurInputPos, (BYTE*)&dwLength, sizeof(DWORD));
pCurInputPos += sizeof(DWORD);
memcpy(pCurInputPos, (BYTE*)&lpwszValName, dwLength);
HRESULT hr = m_rapi.CeRapiInvoke(L"REditSvr", L"RegEditDeleteValue", dwIn,
pInput, &dwOut, (PBYTE*)&pOut, NULL, 0);
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
LocalFree(pOut);
if (hKey != hRoot)
{
m_rapi.CeRegCloseKey(hKey);
}
}
catch (CException* e)
{
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
CString errorMsg = _T("Error in: CRegEditDoc::DeleteKeyValue: ");
errorMsg += szCause;
AfxMessageBox(errorMsg);
e->Delete();
}
return 1;
}
The DLL has been deployed to the PPC \Windows folder by eVC4. My PPC runs WM5 (is this the problem, although I have written programs with eVC4 ok for it).
I would again appreciate your help/advice on why this isn't working. At present I have unlocked my PPC and I am able to edit any part of the registry etc...
Hi VZ800!
I noticed a couple of errors in your code (which you may have corrected yourself by now) but the biggest problem, I think is that you don't register the dll.
Here is the part you missed from MSDN:
(full link: http://msdn.microsoft.com/library/d...en-us/mobilesdk5/html/mob5lrfcerapiinvoke.asp)
To satisfy the requirements of the Remote Access Security Policy
1. Create a provisioning XML document that adds the new node "RAPI" to the metabase. This node must include the absolute path to the *.DLL file. For more information, see Metabase Settings. The following code example shows the contents of a typical provisioning XML file.
<wap-provisioningdoc>
<characteristic type="Metabase">
<characteristic type="RAPI\Program Files\Green Sky\recaller.dll\*">
<parm name="rw-access" value="3"/>
<parm name="access-role" value="152"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
2. Pass the file name of the provisioning XML document to the CAB wizard using the /postxml command line option. The CAB wizard will append the XML to the _setup.xml file it places in the CAB. For more information on creating CAB files, see CAB Wizard.
3. Set the System attribute on the *.DLL file.
Only the Manager security role provides the required permissions for modifying the metabase. The ideal way to get this security role is to have your application signed with a privileged certificate.
Note Since Pocket PC implements a one-tier security model, the CAB install process will automatically have the Manager security role.
Click to expand...
Click to collapse
Here's my advice:
Create a simple function that doesn't receive parameters, but pops up a message on the device. When you see that calling it works, try adding the rest of the code.
Hi
As I understand the DLL does not require code to self- register. Anyway, I can call the DLL function and did as you suggested and put a MessageBox in the function. This displayed fine. My code for the DLL is as follows now:
Code:
#include <windows.h>
#ifdef __cplusplus
extern "C"
{
#endif
__declspec (dllexport) INT RegEditDeleteValue (DWORD cbInput, BYTE* pInput, DWORD* pcbOutput, BYTE** ppOutput, PVOID reserved);
#ifdef __cplusplus
}
#endif
BOOL WINAPI DllMain (HANDLE hinstDLL, DWORD dwReason, LPVOID lpvReserved)
{
return TRUE;
}
INT RegEditDeleteValue (DWORD cbInput, BYTE* pInput, DWORD* pcbOutput, BYTE** ppOutput, PVOID reserved)
{
DWORD rc = 0;
BYTE* curInputPos = pInput;
LPCWSTR lpszValueName;
HKEY hKey;
int len;
// Copy args out of input buffer.
memcpy((BYTE*)&hKey, curInputPos, sizeof(HKEY));
curInputPos += sizeof(HKEY);
// Size of value name string.
memcpy((BYTE*)&len, curInputPos, sizeof(int));
curInputPos += sizeof(int);
// Value name string.
memcpy((BYTE*)&lpszValueName, curInputPos, sizeof(len));
curInputPos += sizeof(len);
// Do the registry delete.
rc = RegDeleteValue(hKey, lpszValueName);
// Allocate memory for the return buffer.
*ppOutput = (BYTE*)LocalAlloc(LPTR, rc);
memcpy(*ppOutput, (BYTE*)&rc, sizeof(DWORD));
*pcbOutput = sizeof(DWORD);
// Free input buffer.
if (pInput)
LocalFree(pInput);
return GetLastError();
}
and this is the code from which I am calling it:
Code:
//-----------------------------------------------------------------------------------
// Deletes the key value from the registry.
//
int CRegEditDoc::DeleteKeyValue(HKEY hRoot, LPCTSTR lpszKey, LPCTSTR lpszValName)
{
USES_CONVERSION;
HKEY hKey;
LPWSTR lpwszKey = T2W(lpszKey);
LPCWSTR lpwszValName = T2W(lpszValName);
try
{
if (lstrlen(lpszKey))
{
if (m_rapi.CeRegOpenKeyEx (hRoot, lpwszKey, 0, 0, &hKey) != ERROR_SUCCESS)
{
return 0;
}
}
else
{
hKey = hRoot;
}
/* if (m_rapi.CeRegDeleteValue(hKey, lpwszValName) != ERROR_SUCCESS)
{
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
AfxMessageBox(_T("Unable to delete value for this key!\nPlease check access rights."));
return 0;
}
*/
// Testing remote registry value deletion.
DWORD dwIn, dwOut;
LPBYTE pInput, pCurInputPos;
PDWORD pOut, rc;
int len = wcslen(lpwszValName)*sizeof(WCHAR);
dwIn = sizeof(HKEY) + len;
pInput = (BYTE*)(LocalAlloc(LPTR, dwIn));
pCurInputPos = pInput;
// Store the hKey value in the output buffer.
memcpy(pCurInputPos, (BYTE*)&hKey, sizeof(HKEY));
pCurInputPos += sizeof(HKEY);
// Store the length of the string in the output buffer.
memcpy(pCurInputPos, (BYTE*)&len, sizeof(int));
pCurInputPos += sizeof(int);
// Store the value name string in the output buffer.
memcpy(pCurInputPos, (BYTE*)&lpwszValName, len);
HRESULT hr = m_rapi.CeRapiInvoke(L"REditSvr", L"RegEditDeleteValue", dwIn,
pInput, &dwOut, (PBYTE*)&pOut, NULL, 0);
// HRESULT hr = RapiFuncTest(dwIn, pInput, &dwOut, (PBYTE*)&pOut, NULL);
HRESULT hResult = m_rapi.CeRapiGetError();
DWORD dwError = m_rapi.CeGetLastError();
if (dwOut)
{
memcpy((BYTE*)&rc, pOut, sizeof(DWORD));
}
if (pOut)
{
LocalFree(pOut);
}
if (hKey != hRoot)
{
m_rapi.CeRegCloseKey(hKey);
}
}
catch (CException* e)
{
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
CString errorMsg = _T("Error in: CRegEditDoc::DeleteKeyValue: ");
errorMsg += szCause;
AfxMessageBox(errorMsg);
e->Delete();
}
return 1;
}
As you can see in the DeleteKeyValue(...) function I called a test-function just to check that I was retrieving the data out of the pInput buffer ok, which I am.
I signed the DLL with the SDKSamplePrivDeveloper.pfx, added the /postxml via the /postxml switch in the cabwiz and successfully created a CAB file which installs the DLL into the \Windows folder on the PPC. The .inf file is as follows:
Code:
[CEStrings]
InstallDir=%CE2%
AppName="REditSvr"
[Strings]
CompanyName="AHartley"
[Version]
Signature="$Chicago$"
CESignature="$Windows CE$"
Provider=%CompanyName%
[SourceDisksNames.Arm]
1=,"arm files",,C:\eMDevelopment\PPCRegEdit\REditSvr\REL
[SourceDisksFiles.Arm]
REditSvr.dll=1
[Files.ARM]
REditSvr.dll
[DestinationDirs]
Files.Arm=,%InstallDir%
[DefaultInstall.Arm]
CopyFiles=Files.Arm
My PC side code invokes the DLL function return 0 as error code. But the error code returned in the ppOutput buffer is 0x00000057 Dec 87. Which equates to the error message "The parameter is incorrect."! Which must be a param of the RegDeleteValue(...) function, as if I comment this out I don't get any error return values!!
Any odeas?
This is all academic now as I won't be finishing the PPCRegEdit program coz of the Remote Registry Editor tool available in the eVC4 IDE, which I hadn't noticed before, duh. But I would like to know why the function isn't working as required.
You were writing this as a tool? :shock:
If you just asked, people would have told you about the existing reg edit and CeRegEdit witch works through RAPI directly.
Still, it is a nice exercise in coding which I done my self once (for other purposes)
Any way, your error is simple:
Code:
// Value name string.
memcpy((BYTE*)&lpszValueName, curInputPos, sizeof(len));
curInputPos += sizeof(len);
You are parsing it incorrectly.
This is how it should look:
Code:
// Value name string.
memcpy((BYTE*)lpszValueName, curInputPos, len);
curInputPos += len;
and on the PC side:
Code:
memcpy(pCurInputPos, (BYTE*)&lpwszValName, len);
should be:
Code:
memcpy(pCurInputPos, (BYTE*)lpwszValName, len);
once again, no offence but if you just read your code more carefully and use debug prints to check parameters, you won't need anyone's help.
Good luck in future projects.
(whoops, made an error my self while correcting another)
Yes, it is just an exercise.
Thanks for all your help. Sorry for the silly errors, I will try and take more care in future.

connect GPRS using RAS on Pocket PC 2005

Hi,
I 'm not able to establish GPRS connection using RasDial on PPC 2005 . It returns always error 633. That means:
"The port is already in use or is not configured for Remote Access dialout.� (See related Microsoft article: ErrMsg: Error 633: The Modem Is Not Installed or Configured...) "
But it works fine in PPC 2003. Does anyone gets RAS API run successfull on WM 5.0 ?
here is my code:
Code:
void ConnectGPRSDlg::connectViaRAS()
{
RASDIALPARAMS rasDialParam;
BOOL bPasswd,bRasEntryFound;
DWORD dwRes, dwSize, dwEntries, dw;
short n_attempts = 5;
HRASCONN g_rasConn = NULL;
CString szError,msg,szResult;
LPRASENTRYNAME lpRasEntry = NULL;
// structure init.
memset(&rasDialParam, 0, sizeof(RASDIALPARAMS));
rasDialParam.dwSize = sizeof (RASDIALPARAMS);
lpRasEntry = new RASENTRYNAME[20];
if(lpRasEntry == NULL)
{
szError.Format( _T("Out of memory") );
msg += szError;
m_editbox.SetWindowTextW(msg);
return;
}
lpRasEntry[0].dwSize = sizeof(RASENTRYNAME);
dwSize = sizeof(RASENTRYNAME) * 20;
dwRes = RasEnumEntries(NULL, NULL, lpRasEntry,
&dwSize, &dwEntries);
if (dwRes != 0)
{
szError.Format( _T("Error getting RAS entries %d"),dwRes );
msg += szError;
}
else
{
szError.Format( _T("got RAS %d entries\r\n "),dwEntries );
msg += szError;
for(dw = 0; dw < dwEntries; dw++)
{
if( 0 == _tcscmp( lpRasEntry[dw].szEntryName, L"T-Mobile Internet" ) )
{
bRasEntryFound = TRUE;
_tcscpy( rasDialParam.szEntryName, lpRasEntry[dw].szEntryName );
szError.Format( _T("found entry: %s\r\n "),lpRasEntry[dw].szEntryName );
msg += szError;
}
}
}
if (!bRasEntryFound) return;
//// connection name
//wcscpy(rasDialParam.szEntryName, _T("T-Mobile Internet") );
//
// parameters from connection structure
dwRes = RasGetEntryDialParams(NULL, &rasDialParam, &bPasswd);
if(dwRes != 0)
{
szResult.Format( _T("getting Dial Params error: %D \r\n") , dwRes );
szResult += szError;
}
else
{
szResult.Format(L"entryname: %s, number: %s \r\n", rasDialParam.szEntryName,rasDialParam.szPhoneNumber);
msg += szResult;
}
// szError.Format( _T("creat new Dial Params...\r\n"));
//msg += szError;
// // Copy in the user credetials.
//_tcscpy( rasDialParam.szEntryName, _T("T-Mobile Internet") );
//_tcscpy( rasDialParam.szUserName, _T("t-mobile") );
//_tcscpy( rasDialParam.szPassword, _T("pwd") );
//_tcscpy( rasDialParam.szPhoneNumber, _T("*99#") );
//_tcscpy( rasDialParam.szCallbackNumber, _T("") );
szResult.Format(L"entryname: %s, number: %s \r\n", rasDialParam.szEntryName,rasDialParam.szPhoneNumber);
msg += szResult;
m_editbox.SetWindowTextW(msg);
do{
// if connection fails, hangup and retry... for 5 attemps
DWORD dwResult = RasDial(NULL,NULL,&rasDialParam,0,NULL,&g_rasConn);
Sleep(2000);
if ( dwResult != 0)
{
szError.Format(L"RAS error: %d \r\n", dwResult);
msg += szError;
m_editbox.SetWindowTextW(msg);
RasHangUp(g_rasConn);
g_rasConn = NULL;
n_attempts--;
}
else {
break;
}
}
while(n_attempts);
if(n_attempts == 0)
{
//AddDebugInfo( L"Can't connect GPRS" );
}
else
{
RASCONNSTATUS rasConStatus;
memset(&rasConStatus, 0, sizeof(RASCONNSTATUS));
rasConStatus.dwSize = sizeof(RASCONNSTATUS);
RasGetConnectStatus(g_rasConn, &rasConStatus);
if(rasConStatus.dwError == 0) {
szResult.Format( L"GPRS connected \r\n" );
msg += szResult;
}
else
{
szResult.Format(L"Ras connect status: %s \r\n", rasConStatus.dwError);
msg += szResult;
}
}
m_editbox.SetWindowTextW(msg);
return;
}

EDB notification

Hi All,
Is anyone familiar with the EDB notification mechanism? I have some code that has opened the appointments database to get change notifications, all well and good. The trouble is I am unable to delete the CENOTIFICATION structure, meaning I get a memory leak after every change.
if anyone has seen this or knows the solution, I'd be grateful.
Code:
CEOID apps_oid;
request= new CENOTIFYREQUEST; // or (CENOTIFYREQUEST *) LocalAlloc (LPTR,
// sizeof (CENOTIFYREQUEST));
if (request) {
request->dwSize = sizeof (CENOTIFYREQUEST);
request->hwnd = hwnd;
request->hHeap = NULL;
request->dwFlags = CEDB_EXNOTIFICATION;
request->dwParam = param;
database = CeOpenDatabaseInSession ( NULL,
&pim_guid,
&apps_oid,
L"Appointments Database",
0,
0, // or CEDB_AUTOINCREMENT,
request);
}
. . .
case WM_DBNOTIFICATION:
{
CENOTIFICATION * notification = (CENOTIFICATION *)lParam;
// Always returns FALSE
BOOL hr = CeFreeNotification(request, notification);
// Always returns 5 - access denied
DWORD dw = GetLastError();
}
break;

Send an image over HTTP in C#

Hey all
I have the following function to generate the http headers for a GET request on an image file:
Code:
byte [] headersAndImage()
{
StringBuilder s = new StringBuilder();
s.Append("HTTP/1.1 200 OK\r\n");
s.Append("Date: Tue, 17 Aug 2010 11:40:00 GMT\r\n");
s.Append("Vary: *\r\n");
s.Append("Server: Custommade\r\n");
s.Append("Content-Type: image/jpeg\r\n");
Bitmap b = new Bitmap("\\dog.jpg");
MemoryStream ms = new MemoryStream();
b.Save(ms, ImageFormat.Jpeg );
byte[] bitmapData = ms.ToArray();
ms.Close();
s.Append("Content-Length: " + bitmapData.Length + "\r\n\r\n");
byte[] headers = Encoding.ASCII.GetBytes(s.ToString());
return join(headers,bitmapData);
}
however when a browser receives this http packet the image is never displayed, usually just see the red X.
Any ideas why this won't work?
Here is the code that works for me:
Code:
public void TransmitFile(byte[] file, string fileName)
{
MemoryStream fileStream = new MemoryStream();
fileStream.Write(file, 0, file.Length);
fileStream.Position = 0;
var response = HttpContext.Current.Response;
response.Clear();
response.ClearContent();
response.ClearHeaders();
response.ContentType = @"application/force-download\n";
response.AppendHeader(@"Content-Disposition",
String.Format(@"attachment;filename=""{0}""", fileName));
long bytesToGo;
int bytesRead;
Byte[] buffer = new byte[1048576]; //1 MB buffer, you may want to use whatever fits your environment
bytesToGo = fileStream.Length;
while (bytesToGo > 0)
{
if (response.IsClientConnected)
{
bytesRead = fileStream.Read(buffer, 0, 1048576);
response.OutputStream.Write(buffer, 0, bytesRead);
response.Flush();
bytesToGo -= bytesRead;
if (bytesRead == 0)
{
break; ;
}
}
else
{
bytesToGo = -1;
}
}
fileStream.Close();
response.Flush();
response.End();
}

Categories

Resources