Hi, is it possible to install any software to support these earphones? I tried it with several phones, seems like Nokia and Xperia dont support it while Samsung does.
I have done some research and it is due to the additional mic channel that cause the problem. It is not like it is totally not working, just that it sound like the music lost layers...
anybody has any experience to this?
Thanks!
Any specific reason why u wanna use one of the worlds crappiest earphones?
LOL as if they would be crappy...haha.
Hmm, when you try to listen to music with XPERIA Headphones and iPod the same thing happens: it sounds like the music lost layers. But when you push the "speak" button it is okay. I did not try the new headphones with the XPERIA so I can't help you for now but I'll have a look later on.
I dont think this is a software issue.
Iphone's head set jacks is a little different from any head set iv seen.
oTToToTenTanz said:
LOL as if they would be crappy...haha.
Click to expand...
Click to collapse
They are BULL****.
Nah
I think Apple's Headset is technically the same as the X1 headset
It should work.
I said should.
You should try it for yourself
Thanks for the replies.
haha, no, i bought the new dual driver version for my ipod.
i came from Crossroads Bijous, i must say they are quite good, better compared to the stock Xperia's and even some sony's dynamic drivers earphones.
Yes! when you press down the mic button, it sounds ok again...
if its a hardware issue, then its really quite a waste..
the real problem is that there is no real std for mini jack with mic too
every company can do it as they see fit
no std for the 3th ring
no std for it's placement
or it's width
so it's always pretty much hit or miss
hi guys, think i solved it!
by using the headphones with the xperia adapter, it actually sounds normal. but i must say theres a good deal of background hiss... is this xperia's problem?
not sure if the mic works... cos the adapter comes with mic too...
it don't and the reason you don't have any issues is that
the adapter don't carry the 3 ring for mic at all so it don't interfear
zeroboi said:
hi guys, think i solved it!
by using the headphones with the xperia adapter, it actually sounds normal. but i must say theres a good deal of background hiss... is this xperia's problem?
not sure if the mic works... cos the adapter comes with mic too...
Click to expand...
Click to collapse
i think its because of lack of impedance matching.
u ll have to get an impedance adapter to reduce that background hiss.
costs like $2 to $10..
looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
oic.. guess i would pop by some hardware store real soon... been super busy with exams
Thanks for the advice and assistance guys!
Related
Firstly, I would like to stress what an excellent piece of kit the Jabra "Dog Tag" BT3030 is. The music sounds awesome and to say I was pleasantly surprised is an understatement.
However, the issue I have is that whenever I change song via the Dog Tag, the Touch HD "wakes up". You can imagine that this kind of defeats the purpose though, as I don't want the phone to be active when it's in my pocket and I'm running around.
Is there any way to stop it waking up?
Bump for help
uh, i wanted to know that too, but anyway i'm getting used to it...
my solution now is use S2U2, which it wakes up at its "Slide to Unlock" screen and won't do any harm..
I see the same behavior with mine when I press pause or play but I don't use that set daily anymore.
I now use a set of Phillips SHB7100 which is brilliant. The wires are integrated into the lanyard which was my bigges issue with the Jabras.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
One strange thing tho is that the Phillips do not automatically connect A2DP when the autopair. They only connect as a headset for phone calls the I have to manually connect the A2DP. Annoying but worth it.
dfkd said:
I now use a set of Phillips SHB7100 which is brilliant. The wires are integrated into the lanyard which was my bigges issue with the Jabras.
Click to expand...
Click to collapse
What do you mean by this?
One of the main reasons I wanted the Jabra BT set was because I could use my own headphones. I'll be changing the chain though when I go back to Bahrain!
In terms of solving the original issue, I've enabled "Device Lock" on my phone. Not an ideal solution but it's OK temporarily
The headphones can be released from the receiver and the layard can be separated.
These pictures should clear that up.
It's the same for the Jabra Dog Tag
I have another issue now - using the device lock, when the phone wakes up, no buttons are pressed. However, because the screen stays on for at least a minute, the battery drains rapidly. I need a proper solution to the initial problem, if any charitable soul can help me
Unless my dogtags are weird, the headphones on them are separate loose and kinda free to roam so they get annoying for me.
dfkd said:
Unless my dogtags are weird, the headphones on them are separate loose and kinda free to roam so they get annoying for me.
Click to expand...
Click to collapse
Oh THAT's what you mean! Fair enough then but I'm sure I could find a custom lanyard if it bothered me that much
What's the best bluetooth stereo headset for the gym/working out...? I want something that is a very minimal design, nothing that's is padded, etc..
Thanks
S9 HD
I have Motorola S9 HD and I love the sound quality.
http://www.jaybirdgear.com/bluetooth-stereo-headphones-buy.php
i'm interested in these, i've read they're supposed to be very good for gym/working out (stand up against sweat) but i've been trying to find an unbiased review on them without shelling out 130$
nexus one being newer also, its not showing on the compatibility list, but i assume it would have no problem with these or vice versa
I have a sony-ericsson hbh-ds220 which has served me well for a number of years - I liked it coz it has a 3.5mm socket so you can use your own headphones.
the power button just started playing up, probably got too much sweat in there and its corroded now so I am on the lookout for something else with a socket and suitable for the gym.
Best Bluetooth headphones for music and the gym
The best solution to listen to music wirelessly but stay connected to your phone is here: mi-sport.net
You can put 4gb worth of music directly onto the headphones, get voice cues to guide you through playlists and albums, but still stay linked to your phone for calls. It`s also fully waterproof for the gym - or swimming. For me, this is far better.
I have the LG HBS-250 headphone. It does the job in the gym. Good clarity music and good for taking calls occasionally. One thing I hate is mute function. It keeps on beeping when on mute. But for 35 bucks I can't ask for more.
http://mobile.buy.com/ibuy/ProductDetail.aspx?listingid=47406830&loc=111&sku=211585958
Sent from my Nexus One using XDA App
I use the MW600
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's compact and it comes with an FM radio. And it has a 3.5mm jack so you can use any of headphones you like. Battery life is excellent and the OLED screen tells you the caller ID (phone numbers only though). It can be paired with 2 devices simultaneously. So if you pair with it with a gaming device, say a PSP, and there is an incoming phone call, it automatically switches to the phone so you can answer the call with one click of a button.
NexusDro said:
I use the MW600
Click to expand...
Click to collapse
Is there any audio fidelity lost when using this bluetooth adapter? I mean compared to having the headphones connected directly to the phone.
I'm not an audiophile but I know that all bluetooth headsets lose audio fidelity more or less. IMO and also according to the reviews, the MW600 loses very little and the loss is very unnoticeable.
hey
just got an x10 from rogers
i have a pair of dre beats solo, they have the mic on the wire as u can see there. it has hte up/down volume and a silver button in the middle to answer calls.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anyways when i plug them in to listen to music everything sounds really echo-ey and distorted, however when i press down on the middle button on the wire of the dre beats it sounds like regular headphones.
note this only happens with my dre headphones. tested it with regular headphones with no mic on the wire and it sounds fine
wondering if theres any way around this without having to swap out the wire on my dre's..
---- also on a side note does anyone know how to get the dre headphones working as a headset becuase i cant take calls using it, it wont work for some reason.
bump anyone?
Have you tried your head phones on a different phone? Sounds like it might be a problem with the head phones rather than your handset..??
It's a problem with the phone. similar problem has also been reported with iPhone earphone. solution: use another cable or don't use it
Solder the answer button pins straight, without the button.
Its a problem with the phone, because I have the Dr Dre bets studio headphones and they work fine when I used them on my Blackberry but on the Xperia they sound horrible. I think the phone just doesn't know how to register them if that makes sense because even on my BB I had to manually switch to headset mood in the music player to make them work. Well it doesn't really bother me because the difference between the solos and the studios is that the studios come with a extra wire without a mic and the headphones work GREAT with those.
yeha its a problem with the x10 and not my headphones, which i use for my laptop and touch pro 2/5800 etc.
i'll have to buy another wire which doesnt have the mic built in. another solution ive found is using a headphone jack splitter (wire which plugs into the headphone jack and allows 2 pairs of headphones to be connected to it) allows it to work fine as well.
thanks for the help
Anyone know of a microphone that I could just plug into the audio port and leave there or anything? Does it support audio input through the mic jack?
The recorded audio on the Iconia is completely awful and useless.
Where's the mic jack? All I have ever seen is the headphone jack, USB, HDMI and charging ports.
Yes it does support audio input through the headphone jack. The internal mic is so bad it's practically impossible to do a video chat. I used a psp headset I had lying around, works like a charm for gchat/skype.
amazon.com/gp/product/B000C3MKFI/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B001L1RZ4Q&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QJNXF6BXN90TJY8VY57
Really? I tried plugging in a standard headset that works on my Acer laptop and it certainly cut off the internal mic but sadly no sound from the headset mic.
peejayw said:
Really? I tried plugging in a standard headset that works on my Acer laptop and it certainly cut off the internal mic but sadly no sound from the headset mic.
Click to expand...
Click to collapse
I think you need something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ok,my plug only has 3 sections not 4. Can you give a part no for your Headset?
Thanks
peejayw said:
ok,my plug only has 3 sections not 4. Can you give a part no for your Headset?
Thanks
Click to expand...
Click to collapse
The 4 section headset comes standard with most of today's smartphones.
I have tried the headset that came with the Iphone 3GS and the Blackberry and they both worked on the A500 for making calls over Skype. The sound quality from the Blackberry headset was much better that the one from Apple.
But, I did notice that the internal mic produced better results when using the recorder function.
Probably need to adjust the mic level on the external headset, but I could not find the setting to adjust this. When pressing the volume button on the A500, a set of slider bars would appear - sometimes there would be a setting for the mic, but more often this would be missing.
Can someone shed some light on how to get the mic slider bar to show up. Thanks.
Dug out the headset that came with my Nexus One and it worked! Couldn't see a volume control for the mic though,just the three standard ones.
peejayw said:
ok,my plug only has 3 sections not 4. Can you give a part no for your Headset?
Thanks
Click to expand...
Click to collapse
http://cgi.ebay.com/New-Red-3-5mm-H...245670?pt=PDA_Accessories&hash=item43a746d3e6
Almost all headset with mic will work on A500, just ebay it
can anyone else confirm the iphone headset works?
the mic on my iphone headset doesn't work at all in the A500. it works in the iphone so i know its not faulty.
i then tried an "urban ears" set and the mic works perfectly so i know its not my A500.
Ive just accidentally broken the headsets that came with the phone, and now Im looking for another headset.
The problem with our phone is that the pinout (the mic and ground pins) is inverted in comparison to samsung, LG, HTC etc ). Therefore, we cant buy just about any headset. Also, I want a wired headset (not a wireless one).
Is anyone using a wired headset in which the button works? I want to be able to take and drop calls, and long press to skip track (which would work if taking and dropping calls works).
Yes, I'm using Jabra Chill headset (got it new for 10€), the pins on the jack are the same as original Huawei headset. Also I'm using Headset Button app, that can emulate multi button headset, so I can skip tracks, forward/reverse songs, etc.
Thanks for the info. Just needed to know one more thing. Does the mic work as well? Can you use the button to receive calls? Also, do you have a u8800 or one of the variants? Is there any difference in the pinout for the u8800 and the variants?
Mine phone is U8800, my brother has U8800 pro. Both phones have same pinout. The microphone and the button is also working. If you are using the Aurora rom, you should also tick "use headset microphone" in sound settings.
Do you know a headset like the one you pointed but in-ear?
Those are better at isolating the ambient sound.
Ive ordered one. Lets hope it works out when it is delivered. Thanks for the help Schrauff.
VuDuCuRSe said:
Do you know a headset like the one you pointed but in-ear?
Those are better at isolating the ambient sound.
Click to expand...
Click to collapse
Maybe these? http://www.jabra.com/sites/mobile/na-us/products/pages/jabrarhythm.aspx?tab=support#UID6
I haven't tried them out, but they have 4-pin 3,5mm jack and mic+button.
I'm also found the a-JAYS One+ which is a great looking headsets with a flat tangle-free cable and has a mic+button.
Here's a nice review: http://www.androidpolice.com/2012/0...and-performance-without-a-hit-to-your-wallet/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone tried one and can confirm that the button works?
Just got the Sony Ericsson MH-650. In ear, perfect noise isolation and the button works quite well. Awesome sound quality as well. Thumping bass and crystal clear trebles
Totally recommended for everyone. At Rs. 1500 (do your conversions, I'm too lazy), theyre really nice.
Just bought a Novero Brooklyn Wired Stereo Headset with Mic http://www.novero.com/collections/music-headsets/brooklyn.html but it turns out that it's not compatibly.
I listen only one channel on both phones and when I click the button I listen regular stereo.
They seem to be great headphones, but not compatible with our 8800.
Crap
Found this life-saver converter:
Adapter Pinout: T-T, R1-R1, R2-S, S-R2
Click to expand...
Click to collapse
here
It switches the Ring2 with the Sleeve.
Probably there are more cheaper version on ebay/dealexterme.
Apparently our phone has Sony Ericsson Xperia compatible pinouts, not iPhone compatible.