Hi!
Someone know how can I terminate irtanting message:
"The file "PocketClock.exe" cannot be opened. One of its components cannot be found ..."
This message obtain in:
a) Eatch time when I soft reset my MDA Pro,
b) Sometime after 1 min.
I was deinstal PocketClock application: In PocketClock application i have enable Screen Saver antil 1 min.
Help.
Thanx in advantage!
divi said:
I was deinstal PocketClock application: In PocketClock application i have enable Screen Saver antil 1 min.
Click to expand...
Click to collapse
Have a look in the windows/autostart folder.
Maybe there is still a link left after de-installation
Andreas
"Have a look in the windows/autostart folder" :
I cannot found this folder ....
It is maybe in registry ?
Whitch and where in HKEY_....?
Someone maybe know that!
Thanks in advantage
The directory you are looking for is "/Windows/StartUp"
If you can't find it in there you can check through the registry for any reference to this application and remove it using any good registry editor (Resco File Explorer is my personal favourite).
PReDiToR said:
...you can check through the registry for any reference to this application and remove it using any good registry editor (Resco File Explorer is my personal favourite).
Click to expand...
Click to collapse
In \Windows\StartUp I have not PocketCalc.exe
I founded it in registry:
\HKEY_LOCAL_MACHINE\SOFTWARE\MEGASOFT2000\PocketClock\
and I deleted \PocketClock\ all.
Now all is good. TY
I am trying to use total commander to edit some registry files like to do this but i cant find where to start. I open total commaner and then i dont see any HKEY_LOCAL_MACHINE file.
HTC 10-Button Comm Manager.cab – HTC 10 Button Comm Manager
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
Real quick
I don't have the time right now for a complete reply. Have you seen the HKLM directory under registry?
HKLM stands for HKEY_LOCAL_MACHINE...
Hope that helps..
Paticakeman said:
I am trying to use total commander to edit some registry files like to do this but i cant find where to start. I open total commaner and then i dont see any HKEY_LOCAL_MACHINE file.
HTC 10-Button Comm Manager.cab – HTC 10 Button Comm Manager
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
Click to expand...
Click to collapse
When you start Total Commander, press the backslash button (\) at the top right corner. this will take you to the root directory of your device.
Double-click on the first folder, which should be called \\plugins.
Now double-click on the folder called Registry.
The HKLM folder that you see now represents "HKEY_LOCAL_MACHINE". you should be able to navigate from here to where you need to be.
Good luck!
found it and made the changes but still no luck
sorry,
you know how to backup the TotalCommander.
so you have all your favorite links and ftp etc..
after a change rom?
@[email protected] said:
sorry,
you know how to backup the TotalCommander.
so you have all your favorite links and ftp etc..
after a change rom?
Click to expand...
Click to collapse
about how to backup the TotalCommander, look at >>> http://www.backuphowto.info/how-to-backup-total-commander-with-all-plugins
wondering how to backup TotalCommander on PocketPC,
chances are that I'm wrong,
on the site but can not figure out how.
thanks for the reply
hi
I am using resco reg editor.
I can not find out how to make a new folder in registry.
Can anyone help me?
Thanks
Menu -> New -> Key
Hi there!
I'm having a problem with a reg file I would like to apply to my Touch HD.
I got installed the "PHM RegEdit" application and if I click the reg file, the application launches and I can not apply the changes.
If I uninstall "PHM RegEdit", I click on the reg file again and the device says that there is no application for such a file.
What can I do?
Greetings!
reg files is just text files you can open it in a text editor and
create or alter the registrys manualy to fit what the reg file include
Thanks for the answer.
I know that, but this reg file has many value changes, it would be better if I can apply it automatically.
Please! Anyone?
Is there another application to apply this reg files?
PHM RegEdit doesn't seem to work.
Greetings!
FdcSoft TaskManager by dotfred
simply post your regfile or copy/paste it here so that we can have a look at it
Hi all
First off, I think that this may only work on a WWE ROM. If you do try it on any other ROM, please make sure you back up the two registry keys listed in point 2) of the instructions below.
I've been fiddling around with the CommManager registry entries and image files and I've managed to successfully add two additional functions to the CommManager. It's working as follows:
Airplane Mode: Working as default settings.
Phone: Working as default settings.
Bluetooth: Working as default settings.
Wi-Fi: Working as default settings.
Microsoft Direct Push: Working as default settings.
Data Disconnection: Working as default settings.
3G: Switch fully working. Row Area Mapped to "\CMBandSwitching.exe".
Internet Sharing: Switch opens Microsoft Internet Sharing UI. Row area mapped to "\Windows\CMInternetSharing.exe". Switch changes to indicate HTC Internet Sharing connected.
Problems/To do:
Although I can enable more functinos using:
[HKLM\Software\HTC\CommManager]SupportedFunctions dword=0x0000000a(10)
For some reason you can not select the bottom two functions in portrait mode, only in landscape.
I can enable the Vibrate option with REG_SZ=Vibrate in a number key but I can't get the Vibrate Icon to display in normal or silent modes.
I can't map the ringer row area to the manila sounds page or the HTC Volume Control function (\Windows\Volumecontrol.dll I think)
If you think you can help with these problems, please update the thread.
Instructions:
In the .zip file attached there are two registy entry files as well as four image files.
1) Close Comm Manager
2) Back up the following registry Keys and all their containing vaules: [HKLM\Software\HTC\CommManager] & [HKLM\Software\OEM\UTMS]
3) Import the registry entries into your phone's registry from CommManager.reg and UTMS.reg in the .zip file attached.
4) Copy the four image files into the \Windows\ folder of your device. N.B it is not recommended to copy them directly from your computer to the windows directory, but to your storage card first.
Edit: Original registry entries for HKLM\Software\HTC\CommManager uploaded.
Cheers
andrew-in-woking
You can add more buttons trhough Registry:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
"SupportedFunctions"=dword:6
Here you can extend it to 8 buttons, what fills the whole screen! After increasing the possible buttons, just add the following (example):
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\6]
@="AUTD" [I](That's ActiveSync)[/I]
"Execute"="\\Windows\\repllog.exe" [I](Path to executable or any other file)[/I]
"ExecuteCommand"="//remote" [I](only needed if you want to start the application with commands)[/I]
Please note: the numbering begins with 0, so if you want 8 buttons, you need at least [HKEY_LOCAL_MACHINE\Software\HTC\CommManager\7]!
List of supported functions
animelover said:
You can add more buttons trhough Registry:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
"SupportedFunctions"=dword:6
Here you can extend it to 8 buttons, what fills the whole screen! After increasing the possible buttons, just add the following (example):
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\6]
@="AUTD" [I](That's ActiveSync)[/I]
"Execute"="\\Windows\\repllog.exe" [I](Path to executable or any other file)[/I]
"ExecuteCommand"="//remote" [I](only needed if you want to start the application with commands)[/I]
Please note: the numbering begins with 0, so if you want 8 buttons, you need at least [HKEY_LOCAL_MACHINE\Software\HTC\CommManager\7]!
Click to expand...
Click to collapse
Hi animelover
Do you know where there is a list of supported functions, such as "@=:autd""?
Thanks
andrew-in-woking
I think @= is the default string
Yes, the "@" is the Default name of any new entry!
As far as I know, you can use these posibilities with "@":
Code:
3G [I](3G switch from Auto to GSM and vice versa)[/I]
Phone
Bluetooth
WLAN
AUTD [I](ActiveSync)[/I]
Ir [I](OBEX service, I think)[/I]
DataDisconnection
FlightMode
Please note: the Default entry "@" must be a "String" value!
Here my reg file to extend comm to 8:
Icons: http://forum.xda-developers.com/showthread.php?t=536466
Update (90% Complete)
Hi all
I've been fiddling around with the registry entries and image files and I've got it to nearly the stage I want to. Check out the screen shot attached. Summary of Progress:
Airplane Mode: Working as default settings.
Phone: Working as default settings.
Bluetooth: Working as default settings.
Wi-Fi: Working as default settings.
Microsoft Direct Push: Working as default settings.
Ringer: Switch Working fully but does not update when the volume setting is changed; toggles between current state and Vibrate or Vibrate and sound on. Row area mapped to "\Windows\Mute_sound.exe" which works. Ringer icon is only displayed when sound is on Vibrate but not on Mute or On.
3G: Switch fully working. Row Area Mapped to "\CMBandSwitching.exe".
Internet Sharing: Switch opens Microsoft Internet Sharing UI. Row area mapped to "\Windows\CMInternetSharing.exe". Switch changes to indicate HTC Internet Sharing connected.
Problems/To do:
Have Ringer/Vibrate icon (Or other representative icons) displayed when sound is on or mute/silent.
Map Ringer/Vibrate row area to the Manila Sounds Settings Page or HTC Volume Control Function.
Enable the Vibrate Switch to change on selection.
If you think you can help with these problems, please update the thread.
Instructions (Attachment is on Post #1):
In the .zip file attached there are two registy entry files as well as four image files.
1) Close Comm Manager
2) Back up the following registry Keys and all their containing vaules: [HKLM\Software\HTC\CommManager] & [HKLM\Software\OEM\UTMS]
3) Import the registry entries into your phone's registry from CommManager.reg and UTMS.reg in the .zip file attached.
4) Copy the four image files into the \Windows\ folder of your device. N.B it is not recommended to copy them directly from your computer to the windows directory, but to your storage card first.
Cheers
andrew-in-woking
Orignal Reg keys Required
I have applied the Reg keys without backing up my orignal and having problem with Comm manager now. I would appreciate if some one can upload the orignal Reg keys so i don't have to hard reset. Thanks.
What problem are you having?
aqeelhaider said:
I have applied the Reg keys without backing up my orignal and having problem with Comm manager now. I would appreciate if some one can upload the orignal Reg keys so i don't have to hard reset. Thanks.
Click to expand...
Click to collapse
Hi ageelhaider
What problem are you having specifically? I must admit I don't have a backup myself, hence the instructions to do so.
Cheers
andrew-in-woking
Hi andrew-in-woking,
I was able to fix my comm manager by deleting the existing reg entries and then importing the reg keys you have provided and its working fine now Thanks for your hard work. Looking forward for the Vibration key to fully function.
Hello Andrew
I tried your changes comm. extended works well in my rom AxLor in Italian, enclosed screen
Let me put in my kitchen this change
but I can not find the package to add the string:
[HKEY_LOCAL_MACHINE \ Software \ OEM \ UMTS]
"OpMode" = dword: 00000000
"PrefDomain" = dword: 00000002
"PrefRAT" = dword: 00000001
[HKEY_LOCAL_MACHINE \ Software \ OEM \ UMTS \ BandSelection]
"BandSettingRetryCount" = dword: 00000003
"Band" = dword: 00000000
Can you help?
I'm not sure I can help.
alesscam said:
Hello Andrew
I tried your changes comm. extended works well in my rom AxLor in Italian, enclosed screen
Let me put in my kitchen this change
but I can not find the package to add the string:
[HKEY_LOCAL_MACHINE \ Software \ OEM \ UMTS]
"OpMode" = dword: 00000000
"PrefDomain" = dword: 00000002
"PrefRAT" = dword: 00000001
[HKEY_LOCAL_MACHINE \ Software \ OEM \ UMTS \ BandSelection]
"BandSettingRetryCount" = dword: 00000003
"Band" = dword: 00000000
Can you help?
Click to expand...
Click to collapse
Hi alesscam
I'm really sorry but I don't actually know much about ROM Kitchens. Are you looking for an .rgu file? I understand that you can rename a .reg file but you may need to edit the file. Hlopefully one of the forum ROM Cookers could help. I was thinking of making a .cab file and if I can do this that might help you.
Cheers
andrew-in-woking
thank's Andrew...
i have sloved with rgu file
But i have another problem;
in v.1.1 the bloothoot switch not work...
have you any idea???
No idea
alesscam said:
thank's Andrew...
i have sloved with rgu file
But i have another problem;
in v.1.1 the bloothoot switch not work...
have you any idea???
Click to expand...
Click to collapse
Hi alesscam
I'm sorry, I don't know. It's working in my device. You should only need the default (unnamed) value "Bluetooth" in the relevant registry Key.
What problem are you having specifically?
Sorry
andrew-in-woking
the problem is alone in the key "on-of", when tap tells me there "impossible to activate bluethoot...this however it didn't happen with the version 1.0
Can you give me the version 1.0 so control which is the difference?
??
alesscam said:
the problem is alone in the key "on-of", when tap tells me there "impossible to activate bluethoot...this however it didn't happen with the version 1.0
Can you give me the version 1.0 so control which is the difference?
Click to expand...
Click to collapse
Hi alesscam
I didn't edit the registry with regards to the Bluetooth Switch. They are the default registry entries.
Unfortunately I've just had to Hard Reset my device so have no registry editor loaded on there to test the device.
Before I re-load the extended Comm Manager I will export my CommManager registry key to compare them.
This will be tomorrow.
Cheers
andrew-in-woking
Andrew
if this change is specific to the commanager of rhodium
maybe I will not work because I use that of topaz
andrew-in-woking said:
Hi alesscam
I didn't edit the registry with regards to the Bluetooth Switch. They are the default registry entries.
Unfortunately I've just had to Hard Reset my device so have no registry editor loaded on there to test the device.
Before I re-load the extended Comm Manager I will export my CommManager registry key to compare them.
This will be tomorrow.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
Ok Andrew
I have sloved with modified your file .reg
this is my rgu modified into my rom AxLor(ITA)
with OEM packages Topaz Commanager (attachement at end post)
i have delete this string in your .reg:
"BluetoothPlatformType"=dword:00000001
Specific to Rhodium
This mod is specific to the HTC Rhodium Comm Manager. I don't know what the effect will be on other devices/Comm Managers.
Cheers
andrew-in-woking
Andrew
read my post above your ...
I resolved