Hi all,
This is my first contribution at XDA.
I wrote for my own purpose a set of 3 tools to quickly enable, disable and query the WIFI on my device.
My goal was to have a shortcut on my SPB Mobile Shell interface running these tools.
Maybe that could help someone else also!
I didn't test it on any other device than mine. So it works for sure on my HTC Touch Diamond, but most probably on Windows Mobile 6.1 devices.
Enjoy it!
Here are the BIN and the source code:
Thanks a lot,
much appreciated.
I was looking for this for some time.
Good work.
Thanks for that
Is it also possible to switch off WiFi again after a certain time? Or after there's no more WiFi-traffic?
alexirsi said:
Thanks for that
Is it also possible to switch off WiFi again after a certain time? Or after there's no more WiFi-traffic?
Click to expand...
Click to collapse
I already have this functionnality integrated into my Diamond. Haven't you?
No, i've got a LG KS20. Only GPRS gets auto-disconnected after a certain time.
Ok, I could try to have a look, but not sure to know how to do that
Related
Hi Guys.
I use the flashlight a lot. It comes in handy but is a bit of a pain having to switch the camera on to use it.
I tried looking through the whole of the registry to see if I could find a way of switching it on without the Camera but no luck. If I could do it' I would either set up a voice command to use it or use one of the buttons directly to run a program to switch it either on or off depending on what it's state is now.
Is it possible or is the flashlight's functions restricted purely to the Camera?
Thanks in advance
Brian
Vijay of the forum has been working on this project with Vjcandela - as yet no joy, but we are forever hopeful :mrgreen:
see here http://forum.xda-developers.com/viewtopic.php?t=41642
Won't somebody please, give me a Wizard?!?
Just joking...
btw, can someone try Haret on the wizard and check if that starts up the flash. If it does, I'll reverse engineer from there. I don't have a wizard and can't test the more elegant driver based solution without the hardware.
V
vijay555 said:
Won't somebody please, give me a Wizard?!?
Just joking...
btw, can someone try Haret on the wizard and check if that starts up the flash. If it does, I'll reverse engineer from there. I don't have a wizard and can't test the more elegant driver based solution without the hardware.
V
Click to expand...
Click to collapse
Tried haret on my wizard vijay - application wouldn't even start
meschle: thanks for trying it. I'll get a Wizard one day. Until I get more HTC hardware to reverse engineer, I'm not really clever enough to implement a more generic solution. For now, Universal and variants only I think.
Hey, and thank you again for your PMs
V
Bluetooth Toggle Discoverable
let you Discoverable the Bluetooth and turn it off by one click
try it
thx
works fine on my kaiser thx!
really useful!
fabio7 said:
works fine on my kaiser thx!
really useful!
Click to expand...
Click to collapse
happy to hear that
Ik was looking for this a long time now so thank you verymuch!!!
Thanks mate, this is really useful!!!!
This is great! Thanks a lot!
thanks a lot for that
just added to my programs tab in tf3d
very useful
Is there a way not to turn off BT when pressed a second time? I just want to disable "discoverable", not turn everything off.
good program thanks
thank you very much, works great on Fuze
thak you very much
Hi I tried the App on LG KS20 but it wont work I get this error:
Code:
Could not get the Bluetooth Radio Mode. Error number: 1359
@
Ukko.Utilities.Bluetooth.get_RadioMode()
@
BlueToothToggle.App.Main()
Any chances to get it to work on ks20 too. (shold be easy since its allso qualcom)
but the BT-Stack is Widcomm/Broadcom
If you need any furter info i.e. on regestry values etc. just contact me.
Bluetooth Toggle Discoverable
Can some one tell me how to nstall thus software
there is two files, should i copy both? and how to use it?
zvi1 said:
Can some one tell me how to nstall thus software
there is two files, should i copy both? and how to use it?
Click to expand...
Click to collapse
Copy both files to the same folder in your device. Optionally you can create a shortcut to add to start menu programs.
----------
Great application Aqrab!
Thanks!
Hello!
Not working in htc hd2...
JMC1961 said:
Hello!
Not working in htc hd2...
Click to expand...
Click to collapse
same for me
it would be great to have an app to easily toggle the Bt on/off. I just need to turn it on and it automatically connects to my bluetoth headset! Great for answering calls while driving.
thanx
thanx a lot maN! good job. i really needed it.
Works flawlessly on my device too
Thank you Scorpio
moesfeld said:
Hi I tried the App on LG KS20 but it wont work I get this error:
Code:
Could not get the Bluetooth Radio Mode. Error number: 1359
@
Ukko.Utilities.Bluetooth.get_RadioMode()
@
BlueToothToggle.App.Main()
Any chances to get it to work on ks20 too. (shold be easy since its allso qualcom)
but the BT-Stack is Widcomm/Broadcom
If you need any furter info i.e. on regestry values etc. just contact me.
Click to expand...
Click to collapse
JMC1961 said:
Hello!
Not working in htc hd2...
Click to expand...
Click to collapse
BrainL said:
same for me
it would be great to have an app to easily toggle the Bt on/off. I just need to turn it on and it automatically connects to my bluetoth headset! Great for answering calls while driving.
Click to expand...
Click to collapse
Well, I have written one that worked on my HD2.
Find it here:
http://forum.xda-developers.com/showpost.php?p=9327417&postcount=2936
Here is cab file that contains this program.
Installs in Program Files and creates a shortcut in Start Menu
Can be uninstalled
Hi there,
are there any devices/programs that can show all visible cell-id, not only thw one currently connected?
If you know let me know.
saulius
[email protected]
phonealarm pro can do this. once you montior the cell, you can link profiles to it and make it set your device config as you like when you come home or at your work, etc. very useful!
try type *#*#364#*#* in phone application
blondak said:
try type *#*#364#*#* in phone application
Click to expand...
Click to collapse
does not work for me
hi there,
jep thanks ...364.... works for me. is there any program that worked with cell1-cell6 info?
excellent tip. Thanks
CellProfileSwitcher can log any cell's it encounters and also near by ones. It can do more than just profile switching.
http://maniac.fschreiner.de/
h4waii said:
CellProfileSwitcher can log any cell's it encounters and also near by ones. It can do more than just profile switching.
http://maniac.fschreiner.de/
Click to expand...
Click to collapse
@h4waii
I have installed this software on HTC Universal but the prog doesnt recognise any cell. Is this device hardware limitation or I need to find proper version?
cellprofileswitcher
yes, i tried this one too...
you can check the forum and will notice that tytn gsm module is some kind different so it doesn't work.
For this reason all ideas are welcome.
I'm interested would it be posible to store data to a file, if the data is seen at the screen, suppose we enter some code (like get imie), or run program and the required information is showen on the screen...
getting info
Maybe someone could share how to get info such like cellprofileswitch returns?
Since i need to combine more information at the same time and know that cps won't manage to do it...
Yes !!!
Work in my Cruise !
Tanks Blondak
Hi,
got my phone at 8.26 this morning....woohoo!!! just started playing
does anyone know if schapps config tool will work with the HD2, it's usually the first thing I install to make sure I set things up correctly.
thanks
twisted-pixel said:
Hi,
got my phone at 8.26 this morning....woohoo!!! just started playing
does anyone know if schapps config tool will work with the HD2, it's usually the first thing I install to make sure I set things up correctly.
thanks
Click to expand...
Click to collapse
You must install NetCF3.0 for Advanced Config..
yes, I know (3.5) but I just wondered of the ap itself would work
twisted-pixel said:
Hi,
got my phone at 8.26 this morning....woohoo!!! just started playing
does anyone know if schapps config tool will work with the HD2, it's usually the first thing I install to make sure I set things up correctly.
thanks
Click to expand...
Click to collapse
good stuff dude
Since most of us are waiting... can't you just install it and report back
twisted-pixel said:
yes, I know (3.5) but I just wondered of the ap itself would work
Click to expand...
Click to collapse
Advanced Config works with Leo roms on other devices.. Thus, it works.. But some of components which related with TF3D maybe not work, of course..
well..I can't switch threaded SMS off...
but some of the other options appear to work
nope..a couple of other things don't work either....auto SIP deployment is turned off in Schapps...but still deploys the keyboard everytime I open an app
so, it looks like it's a 'no' it doesnt work
Did anyone try the advanced configuration tool on HD2 and can please tell if it works?
I am not sure about trying it because I've read that some not compatible programs can disable sound or bluetooth on device...
http://forum.xda-developers.com/showthread.php?t=418151
i've tried it and works fine to me, check out BsB Tweaks 1.6 too!
Thanks for answer
I am using BsB tweaks yes, I just wanted to know if it's smart to install advanced configuration tool which is not compatible with hd2, at least it's not confirmed it works...
Well, it crached mine
Well, I tried it yesterday and it totally messed up mine Leo.
I was getting tons of Application Errors and HTC Sence simply wouldn't load.
Had to do a Hard Reset.
Before actually making changes I have exported them using AdvancedConfig, but even restoring those did not solve the issue.
EvgenijMa said:
Well, I tried it yesterday and it totally messed up mine Leo.
.
Click to expand...
Click to collapse
What version did you install?
WB
Hi,
I have installed ACT v3.3 on my brand new HD2. I also used this program on my Touch Dual and I especially liked the function where you could automatically let the data connection quit after a certain amount of time.
However after enabling this setting on my HD2 it does not seem to work. Do you guys have any idea why this is the cause or do you have any suggestion for another program which does the same trick (quiting data connection after X minutes).
Hope you can help me out with this one. Thank you in advance
whopper said:
Hi,
I have installed ACT v3.3 on my brand new HD2. I also used this program on my Touch Dual and I especially liked the function where you could automatically let the data connection quit after a certain amount of time.
However after enabling this setting on my HD2 it does not seem to work. Do you guys have any idea why this is the cause or do you have any suggestion for another program which does the same trick (quiting data connection after X minutes).
Hope you can help me out with this one. Thank you in advance
Click to expand...
Click to collapse
I think it needs netcf 3.5. Did u install it too?
Yes I installed that too, without it ACT won't even launch. But I installed a spanish netcf 3.5 on a Dutch phone. But I don't think that will cause any issues.
Tried and tested. Works okay. I only needed it to disable threaded SMS, CAB Warnings, and Task Manager refresh rates. I guess you would be fine as long as you won't edit seemingly "outdated" tweaks, i.e. Touch Flo 3D as they now call it Sense.
Point in fact, ACT should only be editting registry entries, and display entries it finds. Which means, theoretically, it should work flawlessly for everyone pre-WP7, but I guess that's not the case for some here...