I was about to throw my THD out the window because every time I make a call I seem to end up doing(running) all kinds of funny things while I am on the call. Sometimes by the time the call is finished I have found somehow my ear has managed to press and run a whole load of programs!
I have now found a resolution to this most annoying feature, when the phone rings I immediately press the ANSER button and then turn the THD off by pressing the OFF button on the top of the unit.
Problem resolved.
Sam
An easy answer you may like to try is HD Tweak which will give you the option to have this done manually
It also has many other great options
Related
About 1/2 of the time that I pull my jamin out of my pocket when I'm getting a call, I hit a button of some sort which shunts the inbound call to voicemail. Very very annoying.
I have my buttons all on the locked setting except for power, but when the phone rings - all bets are off and every button is live. Bad design.
Thanks in advance!
I too had the same problems ...I just get the photo framed and what happens .. I press the power botton and turn the thing off! Very annoying.
but you do eventually get used to remembering to not pick it up by the sides wher ethe buttons are.
Buttons
I asked the same thing last week (see link). The suggestion did sort of work, but was not slick enough for practical use. Would be nice for a proper solution (such as the 'menu*' on the Nokia).
http://forum.xda-developers.com/viewtopic.php?t=41956
Can Any one make the following app? Would it cost me? Does it already exist?
Usually, when your phone is in standby and you get a call, the screen turns on and you can take the call pressing the "send" button.
Is there an app for WM6 (or can some one make it) that can tweak the settings and I still have to press the "on" button to turn on the screen and the buttons?
Or is there a simple registry tweak for that?
Let's say a person cannot take the call accidently under any circunstances. The person doesn't want to press by accident the "take call" button and let the caller hear his conversation.
(no I do not cheat on my wife... I wouldn't cheat on her... i don't have a wife actually)
Regards.
you can lock your phone by holding the disconnect button after you are done using it. It will ask for you to either tap an clearly marked button or enter a certain sequence of symbols (I believe it's ***).
This would be a native, and there non memory taking, solution
fzzyrn said:
you can lock your phone by holding the disconnect button after you are done using it. It will ask for you to either tap an clearly marked button or enter a certain sequence of symbols (I believe it's ***).
This would be a native, and there non memory taking, solution
Click to expand...
Click to collapse
Thanks, but on my phone that is not helping... it lets you take the call anyway with only pressing connect button... thus insecure. Well at least on my phone. I want to have a hard time answering, and never answer by mistake.
btw, TyTN II
i agree i would like to have a program like this on my phone also..
i second that too.
thats something we NEED.
S2U looks promising but i cant get it set up so the send and disconnect button are disabled
Any helpers?
I can pay
I have somehow managed to ring somebody whilst on a call to O2, basically I had to activate my screen to choose the number options. Once I got through to someone my ear must have touched one of the people in the recent call list and rang them.
Is there a way to disable the phone from doing this?
Thanks
Sully
You could press the power button as soon as you start to call someone - that will turn off the screen.
I think there might be something called 'quicksleep' that you can activate with one of the tweak HD programs. I have a feeling this puts the phone to sleep automatically when you start a call, to save you ear-calling someone.
you could try pocket shield www.pocketshield.net
Has the option to lock screen on call conect. Also has other nice features for locking and unlocking device by shaking, light, etc....
will give pocketshield a try.
thanks
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
Hi there,
I am a little ticked off with the way the phone switches the light off and you HAVE to press a button to get it back up when in the middle of a call.
Is there any way to keep the phone awake while on a call? Ofcourse, I HAVE tried out "Shake Awake", but thats a little buggy too.
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button. Is there any alternate dialler available or something which can get all these options on the screen while on the call like the iPhone as its easier to use it than press the button to get the options?
just install keepscreen.
edit: this will keep the screen alive. about the alternative dialer i don't know. but be aware that the phone has no proximity sensor, so you are prone to accidentally press random buttons.
Cool. Will check it out man. Thanks.
I have a different problem - since, sadly, Hero has not got a proximity sensor, I constantly drop my calls by accidently touching the end call button with my cheek. I believe that's a reason the screen backlight goes off so quickly during a call - when the screen is off, it does not react to touch too, so that accident call drops would be less likely.
There are still some serious problems though. First of all, screen timeout during a call is not short nough - while you can know that you must wait a few seconds before you can actually touch the phone with the face, others can't, so call drops are, sadly, unavoidable in such cases. The fact that hold, mute and other buttons are hidden under the menu button is a good thing not only because it keeps Android phillosophy straight, but reduces chances of unwanted misc. actions. The solution of this problem could be an option to disable the end call button, since there are dedicated hardware keys for that.
I have also noticed that if you minimize the dialer during a call with home button, the screen timeout will not be quick, so before continuing a call it's a good idea to bring the dialer back by tapping the hardware call button so the screen timeout becomes quiick again.
Very true. I thought about all these before I posted, but on the other end, I just said 'f it' to myself and asked it here.. hehe.
I wonder if iPhone users have such issues.
As someone in this forum mentioned, it is best to have the screen switched OFF during a call, unless you have something to do. This way, it prevents you from fiddling with the controls.
Not just the hero, earlier models too have this feature. It quite odd in the beginning, but you will love it later.
subhramani said:
Hi there,
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button.
Click to expand...
Click to collapse
Not necessary!
During a call
- Press "Call" to hold (will also mute)
- Press and hold "Call" to activate speaker mode.