Hi, experts !!! kindly help me how to change date format in 3LIT3 rom.
I've flashed 3LIT3 clean on my HTC_P3651 touch cruise, but I can not change required date format.It remains unchange as original even I tried to change by using Registry Tweak. Please help me .
Thanks in advance
sein said:
Hi, experts !!! kindly help me how to change date format in 3LIT3 rom.
I've flashed 3LIT3 clean on my HTC_P3651 touch cruise, but I can not change required date format.It remains unchange as original even I tried to change by using Registry Tweak. Please help me .
Thanks in advance
Click to expand...
Click to collapse
Did you try and change this key in the registry?
HKLM > nls > overrides > SSdte
Need to soft reset to see the change.
Date Format
cr1960 said:
Did you try and change this key in the registry?
HKLM > nls > overrides > SSdte
Need to soft reset to see the change.
Click to expand...
Click to collapse
Yes , I've tried and did soft reset but date format on today screen not changing. It remains as original . Is there any other ways to change ? Please help me.
sein said:
Yes , I've tried and did soft reset but date format on today screen not changing. It remains as original . Is there any other ways to change ? Please help me.
Click to expand...
Click to collapse
I have the same problem.
is the date format the same in Manilla as in file explorer?
cr1960 said:
is the date format the same in Manilla as in file explorer?
Click to expand...
Click to collapse
In Manila today screen original date format is 9 Mar, 2009. I want to change
to Fri 09/03/09(ddd dd/MM/yy).I tried to change by Reg tweak HKLM\nls\overrides\SSDte and soft reset but date format not change on 2day screen, it remains as 9 Mar, 2009 only.
cr1960 said:
is the date format the same in Manilla as in file explorer?
Click to expand...
Click to collapse
NO.
the date in File explorer Changed but Manila didn't.
OK - so we are looking for a registry key relating to Manilla.....
My rom doesn't have Manilla, but there may be a key under hklm > software > htc > manilla2d that controls the date format there. Must over ride whatever is in SSDte.
cr1960 said:
OK - so we are looking for a registry key relating to Manilla.....
My rom doesn't have Manilla, but there may be a key under hklm > software > htc > manilla2d that controls the date format there. Must over ride whatever is in SSDte.
Click to expand...
Click to collapse
Maybe, but cannot find it.
Could also be in the HTCHomeSettings xml file that controls how Manilla 2d works. Sorry - it's hard to try and solve the problem when I cant see the settings.
Maybe some more info here: http://forum.xda-developers.com/showthread.php?p=3317981&highlight=date+format#post3317981 Looks like the date format is hard coded into this version of Manilla 2d (the Iolite version). Posts around 6040 detail how to hex edit the program if the date really bothers you that much.
Try this key. Disasm'ing the file, this is what I found. It changes things somewhat, don't know if it's what you'd like, though.
[HKLM\Software\HTC\Manila2d\Home]
"CustomerTimeFormat"=dword: (set to either 2 or 3)
Setting at 2 will give you short date format, but according to your regional settings. Setting at 3 will be long date format and be locale-neutral.
Or if that doesn't cut it and you don't like results, simply hex edit to whatever you want. Hex edit manila2d.exe and replace 'MMM dd, yyyy' for 'DDD dd/MM/yy' without the quotes of course.
chavonbravo said:
Try this key. Disasm'ing the file, this is what I found. It changes things somewhat, don't know if it's what you'd like, though.
[HKLM\Software\HTC\Manila2d\Home]
"CustomerTimeFormat"=dword: (set to either 2 or 3)
Setting at 2 will give you short date format, but according to your regional settings. Setting at 3 will be long date format and be locale-neutral.
Or if that doesn't cut it and you don't like results, simply hex edit to whatever you want. Hex edit manila2d.exe and replace 'MMM dd, yyyy' for 'DDD dd/MM/yy' without the quotes of course.
Click to expand...
Click to collapse
It works after adding the following register item. it doesn't exist before.
[HKLM\Software\HTC\Manila2d\Home]
"CustomerTimeFormat"=dword: (set to either 2 or 3)
but cannot find MMM dd, yyyy in manila2d.exe through ultraedit.
Akee said:
It works after adding the following register item. it doesn't exist before.
[HKLM\Software\HTC\Manila2d\Home]
"CustomerTimeFormat"=dword: (set to either 2 or 3)
but cannot find MMM dd, yyyy in manila2d.exe through ultraedit.
Click to expand...
Click to collapse
It's there, make sure you search in unicode, not ascii.
Related
Hi. Hope someone can help me with this. Thanks in advance.,.
I am trying to identify a way to change a today these using scripting and am loading the following registry key with the approproate skin = setting...
[HKEY_CURRENT_USER\Software\Microsoft\Today]
When I restart the Today applet or even after a soft reset I see that the Today these is not changing to the one I want. What else do I need to do in order to change today themes via scripting? Do I need to manually copy the tsk file somewhere?
k_kirk said:
Hi. Hope someone can help me with this. Thanks in advance.,.
I am trying to identify a way to change a today these using scripting and am loading the following registry key with the approproate skin = setting...
[HKEY_CURRENT_USER\Software\Microsoft\Today]
When I restart the Today applet or even after a soft reset I see that the Today these is not changing to the one I want. What else do I need to do in order to change today themes via scripting? Do I need to manually copy the tsk file somewhere?
Click to expand...
Click to collapse
did you ever out how to do this. Also I've been tryin to find a way to make a cab to do this also. I'm not having any such luck.
I was looking for a lot ... but only solution is USE TF3D Config or ACT... but I`m using Rhodium manila and those programs doesn`t work ... how to change Date Format Manually in TF3D ? TIA !
Krzysiec said:
I was looking for a lot ... but only solution is USE TF3D Config or ACT... but I`m using Rhodium manila and those programs doesn`t work ... how to change Date Format Manually in TF3D ? TIA !
Click to expand...
Click to collapse
Here you go: extract the file from the zip attached, change the manila file extension to .txt and open with notepad. look for this:
<trans-unit id="IDS_DATEFORMAT">
<source>dddd, MMM. d</source>
change the "dddd, MMM. d" part to your preferred format. Save, change the extension back to nothing AND copy back to your device. Turn off TFLO from today settings, copy the file into \Windows, and do overwrite the existing file if asked.
VOILA
shirreer said:
Here you go: extract the file from the zip attached, change the manila file extension to .txt and open with notepad. look for this:
<trans-unit id="IDS_DATEFORMAT">
<source>dddd, MMM. d</source>
change the "dddd, MMM. d" part to your preferred format. Save, change the extension back to nothing AND copy back to your device. Turn off TFLO from today settings, copy the file into \Windows, and do overwrite the existing file if asked.
VOILA
Click to expand...
Click to collapse
Thanks a lot my friend ! U`re great
My pleasure mate, glad to help!
Cheers...
perfect thnx
Perfect big THNX...
Excellent, thanks muchly.
How do i get e.g. Mon, 12. August 2009. I just need the abbreviation, not the whole day (first two letters will be fair enough)
Got it!
Can someone tell me how to get a capitalized day? Like "Monday 25, 2009".
My HD2 is currently set to Bulgarian regional settings so it can display Cyrillic fonts correctly (that concerns also subtitles in TCPMP). This surely affects the home screen date format and for unknown reason it doesn't want to display it in dd.MM.yy (19.12.09) format, instead it shows something different that exceeds the borders of the date field as you can see in the screenshot (translated it says "Saturday, December 19"). Is there a way to force it to use dd.MM.yy?
On the second screenshots you can see my date format settings.
Same problem here. Was not able to make Sense home screen display short date format.
Guys...any ideas
I just solved it thanks to this thread
Thank you dEf0RM, also Topaz and turkez (from the other thread) !!! I edited the 2c89bd29_manila file from Windows directory. When overwriting it there was a warning that this is a ROM file but I backed up the original file first just in case. After a soft reset the date looked just the way I wanted
OS language - English
Regional settings - Bulgarian
Date format on homescreen: dd/MM/yyyy
10x alot, worked fine for me.
I also want to change the date format on my home screen, but I'm not able to do it. My date shows ma 4 jan (Dutch ROM). Whatever I change in the regional settings, f.i. d/m/y, it still says ma 4 jan, without the year. I want it to say: 4-1-2010. Does anyone know how to do that in a Dutch (1.48) ROM? HD tweak used to do that trick on the HD but no on the HD2 anymore. Any help appreciated!!
drkalo said:
My HD2 is currently set to Bulgarian regional settings so it can display Cyrillic fonts correctly (that concerns also subtitles in TCPMP). This surely affects the home screen date format and for unknown reason it doesn't want to display it in dd.MM.yy (19.12.09) format, instead it shows something different that exceeds the borders of the date field as you can see in the screenshot (translated it says "Saturday, December 19"). Is there a way to force it to use dd.MM.yy?
On the second screenshots you can see my date format settings.
Click to expand...
Click to collapse
where did you get/find the 'r' in the date formats. I cannot find them anywhere.
kuzibri said:
where did you get/find the 'r' in the date formats. I cannot find them anywhere.
Click to expand...
Click to collapse
That's automatically done when you select 'Bulgaria" in the region tab in regional settings and it appends after the number for the year. It is actually an abbreviation for the bulgarian word for "year" and does not interfere with the date format. Same thing is for the currency.
The Dutch file to change the date format on the homescreen is: 4dd5e23b_maila. Thanks to BeeGee_Tokyo
Can somebody post here the solution, because the other thread is gone.
Thank you in advance.
Make sure your Manila version is 2.5. You need to find and edit the file 2c89bd29_manila, located in Windows folder. First, backup the file in case you want to restore it later.
1. Copy that file on your desktop PC.
2. Open it with a text editor like notepad.
3. Find the text IDS_DATEFORMAT. There is <source>ddd, MMM d</source> after that. Change it to your taste.
You can edit the IDS_DATEFORMAT_SMALLVIEW as well, if you need to change the way date appears when you slide up at the homescreen.
4. Save the modified file as a text file and then remove the txt extension so it would look like the original 2c89bd29_manila.
5. Copy back the modified file to your Windows folder.
6. Soft reset
To access your Windows/ROM files you need to use a file manager like Resco explorer or Total Commander.
These 2 apps are very usefull (at least for me lol) but they miss a simply import/export to file like in the old AdvancedConfig and this should be very usefull for chefs.
So my questions are:
Somebody know an app that take note of every registry change?
Somebody know which are the registry keys that these 2 app gonna change?
An alternative app that has an Import/Export feature?
Thanks.
Look up Kheb 1.1.
i use Resco...
Thanks Ted,
this is what i was searching for.
Farmer Ted said:
Look up Kheb 1.1.
Click to expand...
Click to collapse
Thanks Kurniawan,
Even...Resco?? Registry Editor?
kurniawan77 said:
i use Resco...
Click to expand...
Click to collapse
I too would like to make the setting for Auto Data disconnect Automatic. But there is no reg entries to preset for this in the Cooking package. If you find these reg values let me know.
I will try this program listed by Farmer Ted
af974 said:
Thanks Kurniawan,
Even...Resco?? Registry Editor?
Click to expand...
Click to collapse
yep... resco registry editor... but its not like kheb that can take snapshots... but it does import export regfiles....
The problem I see is that Touch Tools only has 2 registry entries under HKCU software Touch Tools. Confirm on exit and Hepatic Feebback.
When I make changes in the program where do these settings get stored?
Do two snapshots, the second with a diff, then make an oem from the diff. Look on your sd card for the kheb/diff folder, and the oem will be there.
I have a morscript to toggle data connxn's; it does the same thing as Nodata.
RegWriteDWord("HKLM","\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\wap.voicestream.com","enabled",0)
bobsbbq said:
I too would like to make the setting for Auto Data disconnect Automatic. But there is no reg entries to preset for this in the Cooking package. If you find these reg values let me know.
I will try this program listed by Farmer Ted
Click to expand...
Click to collapse
i really would like to know this one too.
i found it some time ago on mobile underground, but i lost it on my computer...
Ok for those interested I found out how to set the Touch Tools Setting to have the data connection Auto Off . Just add this to your Gaz Touch tools or Tweak reg file.
Code:
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings]
"VPNCacheTime"=dword:00000005
"CacheTime"=dword:00000005
"SuspendResume"=hex(7):\
47,50,52,53,5F,62,79,65,5F,69,66,5F,64,65,76,69,63,65,5F,6F,66,66,00,00,\
00
"EnableCrPreprocessing"=dword:00000001
"CRPreprocessingTimeout"=dword:00003A98
"CoeffCost"=dword:00010000
"CoeffLatency"=dword:00010000
"CoeffBandwidth"=dword:00010000
"RetryCount"=dword:00000001
This tool works great,its a must for every chef IMO....though im facing a little problem:
Every putted reg key works fine but it seems that i cant get my modded CHT Home ....do i need something else in addiction to the reg keys?
Should i use a Mortscript to run my CHT backup after the 1st boot?
af974 said:
This tool works great,its a must for every chef IMO....though im facing a little problem:
Every putted reg key works fine but it seems that i cant get my modded CHT Home ....do i need something else in addiction to the reg keys?
Should i use a Mortscript to run my CHT backup after the 1st boot?
Click to expand...
Click to collapse
I use CeReg and after I have my CHT setup the way I want I just export the reg keys then I copy and paste this data in to the original CHT reg file. works for me
af974 said:
This tool works great,its a must for every chef IMO....though im facing a little problem:
Every putted reg key works fine but it seems that i cant get my modded CHT Home ....do i need something else in addiction to the reg keys?
Should i use a Mortscript to run my CHT backup after the 1st boot?
Click to expand...
Click to collapse
Here's an example for you:
HTML:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Co0kie\HomeLevel3]
"NotifyIcons.posY"=dword:000000C9
"NotifyIcons.visible"=dword:00000001
"Tasks.visible"=dword:00000000
"Tasks.posY"=dword:0000010E
"MusicPlayer.posY"=dword:0000001D
"MusicPlayer.layout"=dword:00000000
"MusicPlayer.visible"=dword:00000001
"zLayout.NotFirstRun"=dword:00000001
"MusicPlayer.scale"=dword:000003E8
"MusicPlayer.listSize"=dword:00000001
"MusicPlayer.posX"=dword:00000000
"TextClock.scale"=dword:000003E8
"TextClock.listSize"=dword:00000001
"TextClock.posX"=dword:00000000
"TextClock.posY"=dword:00000000
"TextClock.layout"=dword:00000000
"TextClock.visible"=dword:00000001
"NotifyIcons.scale"=dword:000003E8
"NotifyIcons.listSize"=dword:00000001
"NotifyIcons.posX"=dword:00000000
"NotifyIcons.layout"=dword:00000000
"QuickLinks.scale"=dword:000003E8
"QuickLinks.listSize"=dword:00000001
"QuickLinks.posX"=dword:00000000
"QuickLinks.posY"=dword:00000000
"QuickLinks.layout"=dword:00000000
"QuickLinks.visible"=dword:00000000
"Tasks.scale"=dword:000003E8
"Tasks.listSize"=dword:00000001
"Tasks.posX"=dword:00000000
"Tasks.layout"=dword:00000000
"Appointments.scale"=dword:000003E8
"Appointments.listSize"=dword:00000001
"Appointments.posX"=dword:00000000
"Appointments.posY"=dword:00000000
"Appointments.layout"=dword:00000000
"Appointments.visible"=dword:00000000
"Clock.scale"=dword:000003E8
"Clock.listSize"=dword:00000001
"Clock.posX"=dword:00000000
"Clock.posY"=dword:00000000
"Clock.layout"=dword:00000000
"Clock.visible"=dword:00000000
"BackHitbox.scale"=dword:000003E8
"BackHitbox.listSize"=dword:00000001
"BackHitbox.posX"=dword:00000000
"BackHitbox.posY"=dword:00000000
"BackHitbox.layout"=dword:00000000
"BackHitbox.visible"=dword:00000001
@=""
"zLayout.NotFirstRun"=dword:00000001 is very important if you want to import your own reg keys. If it is set to 0 then everything will just be set to the default CHT layout. Good luck (^^,)
bobsbbq said:
Ok for those interested I found out how to set the Touch Tools Setting to have the data connection Auto Off . Just add this to your Gaz Touch tools or Tweak reg file.
Code:
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings]
"VPNCacheTime"=dword:00000005
"CacheTime"=dword:00000005
"SuspendResume"=hex(7):\
47,50,52,53,5F,62,79,65,5F,69,66,5F,64,65,76,69,63,65,5F,6F,66,66,00,00,\
00
"EnableCrPreprocessing"=dword:00000001
"CRPreprocessingTimeout"=dword:00003A98
"CoeffCost"=dword:00010000
"CoeffLatency"=dword:00010000
"CoeffBandwidth"=dword:00010000
"RetryCount"=dword:00000001
Click to expand...
Click to collapse
great! thanks
steph
Thanks,
i used the tool posted here to took the difference after imported CHT backup and then putted them in a reg file but it seems to doesnt works.
Now im using TotalCommander for exporting the whole HTC Manila reg ,should it work now.
bobsbbq said:
I use CeReg and after I have my CHT setup the way I want I just export the reg keys then I copy and paste this data in to the original CHT reg file. works for me
Click to expand...
Click to collapse
Thanks seeM_ZA,
also for the "zLayout.NotFirstRun", didnt know that.
seeM_ZA said:
Here's an example for you:
HTML:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Co0kie\HomeLevel3]
"NotifyIcons.posY"=dword:000000C9
"NotifyIcons.visible"=dword:00000001
"Tasks.visible"=dword:00000000
"Tasks.posY"=dword:0000010E
"MusicPlayer.posY"=dword:0000001D
"MusicPlayer.layout"=dword:00000000
"MusicPlayer.visible"=dword:00000001
"zLayout.NotFirstRun"=dword:00000001
"MusicPlayer.scale"=dword:000003E8
"MusicPlayer.listSize"=dword:00000001
"MusicPlayer.posX"=dword:00000000
"TextClock.scale"=dword:000003E8
"TextClock.listSize"=dword:00000001
"TextClock.posX"=dword:00000000
"TextClock.posY"=dword:00000000
"TextClock.layout"=dword:00000000
"TextClock.visible"=dword:00000001
"NotifyIcons.scale"=dword:000003E8
"NotifyIcons.listSize"=dword:00000001
"NotifyIcons.posX"=dword:00000000
"NotifyIcons.layout"=dword:00000000
"QuickLinks.scale"=dword:000003E8
"QuickLinks.listSize"=dword:00000001
"QuickLinks.posX"=dword:00000000
"QuickLinks.posY"=dword:00000000
"QuickLinks.layout"=dword:00000000
"QuickLinks.visible"=dword:00000000
"Tasks.scale"=dword:000003E8
"Tasks.listSize"=dword:00000001
"Tasks.posX"=dword:00000000
"Tasks.layout"=dword:00000000
"Appointments.scale"=dword:000003E8
"Appointments.listSize"=dword:00000001
"Appointments.posX"=dword:00000000
"Appointments.posY"=dword:00000000
"Appointments.layout"=dword:00000000
"Appointments.visible"=dword:00000000
"Clock.scale"=dword:000003E8
"Clock.listSize"=dword:00000001
"Clock.posX"=dword:00000000
"Clock.posY"=dword:00000000
"Clock.layout"=dword:00000000
"Clock.visible"=dword:00000000
"BackHitbox.scale"=dword:000003E8
"BackHitbox.listSize"=dword:00000001
"BackHitbox.posX"=dword:00000000
"BackHitbox.posY"=dword:00000000
"BackHitbox.layout"=dword:00000000
"BackHitbox.visible"=dword:00000001
@=""
"zLayout.NotFirstRun"=dword:00000001 is very important if you want to import your own reg keys. If it is set to 0 then everything will just be set to the default CHT layout. Good luck (^^,)
Click to expand...
Click to collapse
EDIT: I now have the reg keys I need and am to set both the main screen and start menu. I now just looking to set the time at first boot.
[HKEY_LOCAL_MACHINE\nls\overrides]
"STFmt"="HH:mm:ss"
"ITime"=dword:00000001
The above keys will work after first boot, but not during first boot process.
Any help would be appreciated.
Many thanks
GhostXSeries
EDIT2: Solved issue thanks to caliban2 for giving me the idea!
Found you need all the following reg keys to make it work!
[HKEY_LOCAL_MACHINE\NLS]
"DefaultLCID"=dword:00000809
"SystemLCID"=dword:00000409 - I assume this points to your region?
"LegacyLocaleMode"=dword:00000001
[HKEY_LOCAL_MACHINE\NLS\overrides]
"ITMPN"=dword:00000009
"ITLZr"=dword:00000001
"ITime"=dword:00000001
"STFmt"="HH:mm:ss"
"STime"=":"
Thanks again for your help!
Both backgrounds are set in their corresponding *.cpr file(s). You can either change it there and re-direct it to your image or simply rename your image and over-write the stock WM image.
Reg key for 24 hour:
Code:
[HKEY_LOCAL_MACHINE\nls\overrides]
"STFmt"="HH:mm:ss"
jmart518 said:
Both backgrounds are set in their corresponding *.cpr file(s). You can either change it there and re-direct it to your image or simply rename your image and over-write the stock WM image.
Reg key for 24 hour:
Code:
[HKEY_LOCAL_MACHINE\nls\overrides]
"STFmt"="HH:mm:ss"
Click to expand...
Click to collapse
Thanks for getting back to me so quickly. had a brain wave and renamed one of the wallpapers and then did a search through the registery for that new file name. Found it under
HKEYCU\controlpanel\desktop\wallpaer!
I have been looking for the 24 hour key for ages! Cheers
When I cooked both registery keys into the rom neither worked. Time is still 12 hour and the background screen is still default. Even though when I go in to the desktop registery key the entry is the one I entered
for the time format ...
HkLM\nls\overrides:
12h am-pm
ITime = 0
S1159= AM
S2359= PM
STFmt = h:mm:ss tt
Click to expand...
Click to collapse
24h:
ITime=1
STFmt = HH:mm:ss
Click to expand...
Click to collapse
I'm sorry, I miss understood what you were looking for originally. Are you trying to set a wallpaper for the first boot? If so, I simply just save my wallpaper as a .gif and name it "Default_stwater_480_800.gif" this will vary depending or device resolution.
As far as the clock settings not sticking, make sure that your reg isn't being over-written later in the cooking process.
Edit:
Thanks Poy, I forgot about "ITime"=dword:00000001
jmart518 said:
I'm sorry, I miss understood what you were looking for originally. Are you trying to set a wallpaper for the first boot? If so, I simply just save my wallpaper as a .gif and name it "Default_stwater_480_800.gif" this will vary depending or device resolution.
As far as the clock settings not sticking, make sure that your reg isn't being over-written later in the cooking process.
Edit:
Thanks Poy, I forgot about "ITime"=dword:00000001
Click to expand...
Click to collapse
You were close with the filename. I found out it was HTC_stwater_480_800.jpg. Once I changed that it then set the default background for me. I simply created an ext package and added the new wallpaper with the same name into a files folder and then set the app.dat file to copy it to the windows directory.
Still working setting the time to 24h
GhostXSeries said:
You were close with the filename. I found out it was HTC_stwater_480_800.jpg. Once I changed that it then set the default background for me. I simply created an ext package and added the new wallpaper with the same name into a files folder and then set the app.dat file to copy it to the windows directory.
Still working setting the time to 24h
Click to expand...
Click to collapse
You also can customize (Don´t remember if Titanium or Start Menu´s background) overwritting files "Default_stwater_480_800.gif" & "Default_stwater_800_480.gif" (depends of resolution).
Is not necessary add an app.dat to the package, because all archives inside "files" folder go to windows folder. If you want a copy of these archives in other folders, then you can set app.dat
Greetings
Grand,
Got start menu background working. Now just looking to set the time to 24 hour format. If I make the changes suggested above after I flash the rom it changes, but If I cook reg changes into the rom and flash it stays at 12 hour.
Something must be overwriting your time settings either later in the cooking process or a provxml. OSB has the ability to preview reg, but I am not sure about OSK (it's just been too long)
manila world clock has the option to change time format 24h/12h so maybe something has to be also changed there ...
I think you could be right. There is definitly something on the initial startup is overriding the cooked registery keys.
try cooking without adding any keys to nls, make your changes in regional settings (winmo-settings) and then export complete nls-key, using it in your kitchen next time.
according to osbuilder, nothing in nls-key is set via provxml, only by boot.rgu and the rgu from base_lang_0xxx (in sys). adding your own reg later in cooking-process should overwrite them just fine.
the important part during 1st boot is LCID (=region), which also defines a standard timeformat for the region.
GhostXSeries said:
EDIT2: Solved issue thanks to caliban2 for giving me the idea!
Found you need all the following reg keys to make it work!
[HKEY_LOCAL_MACHINE\NLS]
"DefaultLCID"=dword:00000809
"SystemLCID"=dword:00000409 - I assume this points to your region?
"LegacyLocaleMode"=dword:00000001
[HKEY_LOCAL_MACHINE\NLS\overrides]
"ITMPN"=dword:00000009
"ITLZr"=dword:00000001
"ITime"=dword:00000001
"STFmt"="HH:mm:ss"
"STime"=":"
Thanks again for your help!
Click to expand...
Click to collapse
the stuff in \overrides shouldn't be necessary. i set my region to english (uk) and here is what i get:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\nls]
"DefaultACP"=dword:000004e4
"DefaultLCID"=dword:00000809
"DefaultOCP"=dword:00000352
"LegacyLocaleMode"=dword:00000001
"SystemLCID"=dword:00000409
[HKEY_LOCAL_MACHINE\nls\overrides]
"LCID"=dword:00000809
"SSDte"="dd.MM.yyyy"
this gives me 24hr-clock and the crazy date-format you guys use on your island.
while playing with this i noticed that region-settings in manila add lot's of keys in \overrides, while winmo-settings does it's stuff in \nls (except the LCID in overrides).
(nevermind the "SSDte", that key i use for setting date-format on lockscreen.)
[QUOTE
[HKEY_LOCAL_MACHINE\NLS]
"DefaultLCID"=dword:00000809
"SystemLCID"=dword:00000409 - I assume this points to your region?
"LegacyLocaleMode"=dword:00000001
[/QUOTE]
Hello mate,
just to correct you:
"DefaultLCID" points to the region, not "SystemLCID"
Best Regards!
Skyguar