Related
Hi Guys,
Just to say THANKS to everyone out there, not only the developers but the normal mortals too - who put in effort to help people here.
I have uploaded the Windows mobile 2003 to my site. Its on a super mega link (great words ) I get 1meg a sec+ when i download from it at work !
http://www.ali.nildram.co.uk/xda/
Cheers Guys
OK it's seems to upgrade the Radio any issues? What if I upgrade the radio to ATT's? Ideas thoughts anyone?
Salam
Thanks Ali-Butt
Othman
since phone upgrade i have noticed that gprs is a tad faster. 8)
Does it support Sim Tool Kit
Hi Ali,
Does this upgrade have the sim tool kit?
Thanks in advance :?:
isn't this the same version everyone has been using?
I just have to run the executable file right? I don't need an SD Card writer or anything for this download? just my normal connection and activesync? what if the upgrade screws up? can i reload the old ROM image? and where do i get it!
Thanks a lot!
hi from Riyadh
Hello again
well, what i have notice there are more then one version of WM2003
one of them which i downloaded from http://members.lycos.co.uk/xdarom/ where i couldn't downgrade using the nornal method and i was force to use SD Card to go back to my previous ROM but the other version which i downloaded from this FTP Server 195.64.88.44 xda/xda works pretty good and i was able to downgrade to XDA-Developers Special ROM version 1.2 with no problems and without using SD Card.
thanks again for sharing
Othman
http://www.pocketpc4arab.com
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
I upgraded my XDA last night via my USB cradle. I had NO problems at all. Took a little longer than normal :?: But other than that it was fine.
Gil
Gil,
did you use Ali file uploaded on his site ? Is your XDA UK or Asian version ? Which nr ?
Thanks,
no service
Can someone help a newbie out here - I installed the WM2003 no problems and then installed to 4.21.00 radio stack
but now my phone get's no service any ideas? Im in Texas on T-mobile
Please, see this link may be useful for you
http://xda-developers.com/forum/viewtopic.php?t=1687&start=75
brix3 said:
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
Click to expand...
Click to collapse
I had the same set upwith yours previously. I upgraded to SER 1.2 and WM 2003 after that. I also upgrade my radio stack to 4.21 from O2 UK. But now, I am back with SER 1.2 and Radio stack 4.21. I wish Icould go back to my old Radio Stack 4.17.
With 4.21 Ilost the "G" and signal strength for GPRS.
I hope my experience helps.
Beeheij, why didn't you keep the 4.17 radio version with WM2003 ? Was it not running properly ?
I think it's always dangerous upgrading the radio module with newer version dedicated to other regions (UK)
Thanks,
brix3,
I want to back to 4.17, but I cannot. Somehow during the process of rolling back I was kicked out.
As for the WM2003, the problem was in the SMS mode. When I picked a phone number, the "+"sign in my contact was not transferred tothe address in the SMS. So each time I wanted to send SMS, I had to correct the phone number.
My Battery Pack was not working. It hung my XDA.
Hope this helps
Has anyone in the US used or done this upgrade? Since it also upgrades the Radio Stack I'm just wondering. If GPRS is getting dropped as stated in other posts it is more that the network drops you or you lose data connection between cells, or the network has a load balance that give placement to voice users over data when bandwidth is needed. Not so much that your radio stack does it.
On the other hand just incase anyone wants to prove me wrong :wink: who in the US has upgraded their radio stack to O2 4.21 and experienced a better performance than AT&T's radio stack (speed stability as staed on their website) :?: This means you probably already had to manually switch the default band 8) first, right? :x
Let me know I love to be wrong :shock: ......I'm only that much smarter than I was yesterday :roll: :lol:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
i must admit this version of ppc2003 is the dogs danglys compared to the old ozone version
Phoxie_Phreak said:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
Click to expand...
Click to collapse
as far as i know XDA v1.2 will not touch your Radio, it will just replace your old CE ROM with the new one which has lots of cool stuff.
regards
Othman
Hello All
Does anyone know this error, which I get during the upgrade to WM 2003, and how to circumvent this:
The ROM image that you are trying to upgrade is not compatible with your pocket PC.. Please compare the device and upgrade information below.
Your current information:
Model: PW10A1
ROM version: 3.16
Language: Englisj
Your upgraded image information:
Model PW10B1
ROM version 4.00
Language: English
Please download the compatible utility and try again.
Any ideas?? I downloaded the image (TMO2003.exe) from here
I hope someone has some ideas..
Thank you in advance
Best regards
Lars
Use adaptROM
Just go to
http://www.xda-developers.com/adaptROM/
There you will find, what you need.
:wink:
Kaputter
Lars1106 said:
Hello All
Does anyone know this error, which I get during the upgrade to WM 2003, and how to circumvent this:
The ROM image that you are trying to upgrade is not compatible with your pocket PC.. Please compare the device and upgrade information below.
Your current information:
Model: PW10A1
ROM version: 3.16
Language: Englisj
Your upgraded image information:
Model PW10B1
ROM version 4.00
Language: English
Please download the compatible utility and try again.
Any ideas?? I downloaded the image (TMO2003.exe) from here
I hope someone has some ideas..
Thank you in advance
Best regards
Lars
Click to expand...
Click to collapse
Extract the Zip file to a folder, and click start Not the setup icon.
Please be careful playing rom upgrade.
Always Backup your original rom.
Good luck. :wink:
Everything works but the PHONE
Well.. did the upgrade to wm2003... everything but the phone works..
I am using Orange in Denmark.. it simply now says "NO SERVICE" when tapping the Icon in "Today" screen
Have anyone here got a clue about what to do now, the phone is the most important part for me!!
Wbr
lars
Re: Everything works but the PHONE
Lars1106 said:
Well.. did the upgrade to wm2003... everything but the phone works..
I am using Orange in Denmark.. it simply now says "NO SERVICE" when tapping the Icon in "Today" screen
Have anyone here got a clue about what to do now, the phone is the most important part for me!!
Wbr
lars
Click to expand...
Click to collapse
What version of WM2003 you are using?
Did you setup your network band setting? click phone/tool/option/band 900/1900.
See my post on this: you might have to change back the band with Bootloader/Calendar button: if you change something under the Tab Band in Phone settings, you can not use your phone anymore (in Europe). Don't ask me why, I had the same problem. If I don't touch the Phone Setting menu, everything works.
Hello..
I am using version 4.2.1081 (build 13100) and I did choose the 900 network for Europe... but still no work
And the worst of all.. Unfortunately no backup.
Did you choose the 900-band with the bootloader/calendar option or through the phone/settings menu? i could only change it with the bootloader, I have the same version as you have.
Hi Rick
Right now, looking through forum, to find out what the bootloader method is.. Can you enlighten me??
Thanks in advance
The same my XDA 3 weeks ago
http://xda-developers.com/forum/viewtopic.php?t=1687&start=100
Note: have to HOLD the JOYSTICK for confirmation of the selected band then soft reset
Re: Everything works but the PHONE
Hi OCMAX,
Do you know the way to set the Maxis GPRS in WM2003.
I had tried two ways but it doesn't work at all after the upgrading:
First setting
-------------
1. Modem : Cellular Line
2. Number : +0~GPRS!net
Second setting
----------------
1. Modem : Cellular Line (GPRS)
2. Access point name: net
The username and password for both setting are maxis and wap.
Would you please share your experience ? Thanks !
Regards,
Vince
OCMAX said:
Lars1106 said:
Well.. did the upgrade to wm2003... everything but the phone works..
I am using Orange in Denmark.. it simply now says "NO SERVICE" when tapping the Icon in "Today" screen
Have anyone here got a clue about what to do now, the phone is the most important part for me!!
Wbr
lars
Click to expand...
Click to collapse
What version of WM2003 you are using?
Did you setup your network band setting? click phone/tool/option/band 900/1900.
Click to expand...
Click to collapse
WM 2003 no service after bootloader
Hi
I am affraid that this didn´t work.. I did this.
1. Through the bootloader I choose GSM 900 using the joystick
2. Did a softreset to quit the bootloader.
3. Still no GSM service
Any more ideas I can try??
Thanks in advance
Lars
@Lars
Try again GMS 900/1800 (900 BAND- no working in my XDA) :wink:
Good luck!
Hi..
No I am affraid this didn´t help..
I read somewhere that you had to hold down the joystick whilst doing the reboot, is this so...
Wbr
Lars
@Lars
View: http://xda-developers.com/phpBB/viewtopic.php?t=2168
I had the same problem and I switched back to the old radio version and now it works...
I think the radio upgrade does not work in Europe. Since in the US they have 900/1900 band and in the EU 900/1800. I'm a little bit confused because also the 900 carriers (here in Germany two: TMO and vodafone (D2) are not detected. Why?
Chris
Re: Everything works but the PHONE
yeyang said:
Hi OCMAX,
Do you know the way to set the Maxis GPRS in WM2003.
I had tried two ways but it doesn't work at all after the upgrading:
First setting
-------------
1. Modem : Cellular Line
2. Number : +0~GPRS!net
Second setting
----------------
1. Modem : Cellular Line (GPRS)
2. Access point name: net
The username and password for both setting are maxis and wap.
Would you please share your experience ? Thanks !
Regards,
Vince
Click to expand...
Click to collapse
Actually I'm not using any GPRS service at the moment because I felt it doesn't worth it. ( Screen too small to browse around ).
Hope this setting can help you.
Service: Maxis GPRS (Up to u to add diff. name)
User name: maxis
Password: wap
Connection: (NEED to check with your service provider)
Phone: *99***1#
Connection type: PPP
Idle timeout: Never
Query DNS: unticked
Primary DNS: 202.75.129.101
Secondary DNS: 202.75.129.102
IP address: Automatic
Login Script:
Send:ATZ
Send CR:
Send:at+cgdcont=1,"ip","net"
Send CR:
End
found this in other forum.
Good luck. :wink:
Lars1106 said:
Hi..
No I am affraid this didn´t help..
I read somewhere that you had to hold down the joystick whilst doing the reboot, is this so...
Wbr
Lars
Click to expand...
Click to collapse
Went you in the bootloader band selection. scroll down to the setting using your joystick and push the action button (center of the joystick).
1) select the network 900/1800 or 900/1900 and push action button
2) select to ON the GSM and push action button
It will prompt you when done. :wink:
You need to go to the O2 site and down load the European radio stack 4.21. You can't use a US radio stack on a European XDA and vice versa. The O2 4.21 stack will install from an .exe so it is easy to do and it workd with the WME 2003 4.00.10.
Do you know their site.. have searched on Google wo result !!
Cheers,
Lars
Extract the Zip file to a folder, and click start Not the setup icon.
Please be careful playing rom upgrade.
Always Backup your original rom.
Click to expand...
Click to collapse
I tried unzipping it to a folder. All i get is an upgrade application file and a folder called "english" which has the NBK.nbf upgrade ROM image. No Start nor the Setup icon.
Hello All
Does anyone know this error, which I get during the upgrade to WM 2003, and how to circumvent this:
The ROM image that you are trying to upgrade is not compatible with your pocket PC.. Please compare the device and upgrade information below.
Your current information:
Model: PW10A1
ROM version: 3.16
Language: Englisj
Your upgraded image information:
Model PW10B1
ROM version 4.00
Language: English
Please download the compatible utility and try again.
Any ideas?? I downloaded the image (TMO2003.exe) from here
I hope someone has some ideas..
Thank you in advance
Best regards
Lars
Click to expand...
Click to collapse
I am getting the same problem. I tried running adaptROM.exe file. But it opens a CMD dialog box and then closes. I try running the upgrade, and i still get the same error. Am i doing something worng???
Suggestions... please!!!
-Thanks
This seems to be the most commonly asked question on this forum "Why can't I use my XDA with PPC 2003 as a modem". Now I have read a lot of posts talking about it and I realize it can be done with PPC 2002 and not 2003. Why? Is it something that microsoft blocked? Has no one written the software or has it just not been included in people's roms? I was wondering if someone can explain to me the logistics why you can't use XDA as a modem or unlock it in PPC 2003. Also if anyone knows of a software I can purchase to use my XDA as a modem I am all ears. Thanks again.
How to setup Wireless Modem for USB
http://www.myxda.com/html/HowToUse/XdaII/How to setup Wireless Modem for USB.htm
http://www.myxda.com/serviceandsupport/template/XdaIIHowToUse.vm
The new xda software upgrade +wireless modem
http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm
Problem
First the instructions on setting up the modem were great, but where do I get the two files I need. Second the "upgrade" is acctually a drastic downgrade. Your link told me I should upgrade to
ROM version: 3.20.06 ENG
ROM date: 07/30/03
Radio: 4.21
Protocol: 32S54
This is very outdated. I am currently running
Rom version: 4.01.00
ROM date: 10/27/03
Radio Version: 6.25.02
Protocol version: 324e4
I don't mean to be condescending, but is the version you are talking about PPC 2002 or 2003? Also Do you know the difference bettween the two rom versions I just listed. Thanks.
I don't know how to set the wireless modem, but I know that 3.xx.xx are 2002 versions and 4.xx.xx, R.xx.xx and A.xx.xx are WM2003 ones! 8)
Windows Modem Drive
In first place the ROM 4.01.00 have in the folder program the Wireless Modem?
If they Modem it is there you does not need to do upgrade. You OK
The Upgrade that I'm suggested is the original end last Rom from Asia XDA.
The rom 4.01.00 is the T Mobile vession.
The software you need is in this line [drive]
http://www.myxda.com/serviceandsupport/template/XdaIIHowToUse.vm
Wireless Modem
How to use Wireless Modem for USB. -
HTML:
[doc] [driver]
download the drive from this place.
I'm sorry I can't click on the link for the download. Also isn't the link to a PocketPC 2002 version?
This is the drive that you needs for the USB XDA wireless modem.
josedias (or anyone that can do so),
Can you post the wmodem.exe application from the XDAII, and possibly a registry snapshot (http://www.geocities.com/s_k_s_k_s_kru/util.html#ss)?
Thanks!
Shawn
USB modem configuration: xda I / xda II
auburnham
modem configuration:
http://www.geocities.com/s_k_s_k_s_kru/util
http://www.myxda.com/serviceandsupport/template/XdaIIHowToUse.vm
http://www.myxda.com/html/HowToUse/XdaII/How to setup Wireless Modem for USB.htm
USB modem configuration: xda I / xda II
http://www.myxda.com/html/HowToUse/XdaII/How to setup Wireless Modem for USB.htm
Does the WirelessModem_USB_files.zip works on XDA I and PocketPC2003? I'm currently using the wireless modem from the Special Edition 1.2, but intend to upgrade to the T-Mobile 2003 version, just need to ensure I can still have modem capability. Please advise. Thanks.
That was the original question I asked when I started this thread and I really don't think it's possible. There is no app built into 2003 for a modem.
josedias,
I've already read those instructions. They are all for the XDA II, and they refer to a version of WMODEM.EXE that is not in any of the XDA I ROMS. This version of WMODEM.EXE has the option for USB connection, while the XDA I versions do not. That's why I would like for someone to post a copy of the actual file "WMODEM.EXE" from their XDA II, along with a snapshot of the registry so we can analyze the differences. Then we can use the USB Dialer that you posted. Can you copy this file from your XDA II? It should be in \Windows\wmodem.exe.
Thanks!
Shawn
XDA I & II Modem
Shawn
I have xda I With Wireless Modem
Rom: 3.20.06 ENG
Rom dates: 07/30/03
Radio version: 4.21.01
Protocol: 32S54
Also XDA II with Wireless Modem
Rom 1.60.00WWE
Rom dates 12/03/03
Radio 1.08.00
Protocol 1337.18
ExtROM 1.60.44
Both XDA I and II work with the same drive that I found in this URL http://www.myxda.com/serviceandsupport/template/XdaIIHowToUse.vm
Enclose the Drive from my XDA II \Windods\wmodem.exe
I did not find the wmodem.exe of the XDA I
I only found the Shortcut in Windows\Start Menu\Programs???
wmodem on my xda I didnt WORK !!!
When i run irda or usb modem, my pc didnt react. according the instructions when you start usb modem pc must recognized it, but my pc didn't do anything.
i have wm 2003, (win xp on desctop), with no wmodem func, i download it from here. the question is: how make xdaI recognisible as a modem for pc. may be it needs some reg tweaks???
The file you downloaded was for xdaII.
There is no software for XDA PPC 2003 only PPC 2002
gunsandroses,
The German WM2003 ROMs have WMODEM that (I believe) works with the English versions. However, this version of WMODEM only supports serial and IrDA, just like the English version of the PPC2002 ROMs. I have neither a serial port or IrDA on my laptop, though, so I can't tell you if it actually works with the PC. You can find this German version of WMODEM on this forum.
Shawn
i have german wmodem programm, but it didnt work. when i started wmodem irda my ir port on pc shows that connection is established, but when i tried to dial the number, according the instruction, my pc says - there is no modem, or it not instaled. so it seems to be that xda didnt recognized as a modem. but when i stoped wmodem the connection between xda and pc stoped too. i dodnt understand why my pc could not use the modem of xda????? my be, when i tune and tweek my xp i turn off some services, that need to be run for that? but my sonyerricson t610 worked great!
auburnham said:
this version of WMODEM only supports serial and IrDA,
Click to expand...
Click to collapse
auburnham,
Why can it only support IRDA or serial connetions? The software gives you the option to connect USB and Bluetooth. Also the instructions listed with the dowload explain how to connect through USB. Have you ever successfully made this connection with a desktop and Serial port? Where did you buy a serial wire? Thanks again.
-Ross
I upgraded my G3 T-Mobile MDA-Vario with Dr Puttingham's as strong working recommended T-Mobile ROM 2.26 (downgraded first with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and then upgraded with ruu_prodigy_226102_22610105_022511_tmous_wwe_ship. exe). The datas after the upgrading are as followes (old datas before are in brackets):
-MDA Vario lokiwiz unlocked
-IPL 2.26 (1.06)
-SPL 2.26 (1.06)
-GSM 02.25.11 (01.12.10)
-OS 2.26.10.2 (1.6.2.1)
-CPU TI-OMAP850 195 MHz (overclocked to 240 MHz)
-OS Windows Mobile 5.1.195 build 14955.2.3.0 (v.5.1.70.3 Build 14409.1.1.2)
-ROM 2.26,10.2 WWE Engl. 06/07/2006 (1.6.2.1 GER from 11/14/05)
-ExtROM 2.26.10.105 (1.6.2.107)
-Radio 02.25.11 (01.12.10)
1. Everything works o.k. except the Vario talks to me now in English. Is there any strong working 2.xxx ROM in German around ? Is it possible to upgrade the VARIO-I to Win-Mobile-6 German and does it make sense to do so? If yes, then my Vario would become a G4 instead - if I understood the threads correctly?
2. Before the upgrade I was able to connect to my PC via ActiveSync 4.5 and my Vario automatically connected to the internet via the USB-AS-cable using the established connection on my desktop PC, which is setup to pick up the IP-Adress from my provider automatically.
3. After the Upgrading to 2.26 ROM I am not able anymore to accomplish an Internet-connection on my Vario at all. Is there somebody who experienced the same behaviour with this 2.26 T-Mobile US-ROM and what is to do (step by step) ? Perhaps Dr Puttingham or somebody of you "MDA-Vario users" has a solution for this malfunction. Every contribution in getting the most stable ROM and OS (either best in German or second best in English) will be welcome. Thank you all for your help, with regards, astorgus
I have a unlocked T-Mobile MDA III Compact running windows mobile 6 professional and want to update to windows mobile 6.5 can anyone help?
I am running windows 7 , i think it is a problem with windows 7 disconnecting from activesync as soon as MDA goes into bootloader screen.
Can anyone give me a step by step walh through how to upgrade and suggest a good ROM upgrade?
Regards,
John.
Rom Vers 3.15.110.2 WWE
Rom Date 10/02/07
Radio Vers 03.06.90
Protocol Vers 4.1.13.50
...
go here for your original rom, just incase you **** up..
http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
download uspl 1.11.cmon - click 'uspl 1.11.cmon' on my signature to download..
*do uspl
do the same for the andrew6.1 rom im using if you like..
if not, i suggest babbelut6.5 rom..
these links below is for vista but maybe it will work with windows7.. i dont know, im using the good old xp..
http://translate.google.com/transla...showtopic=139079&st=0&p=1399080&#entry1399080
tm-phonedownloads not working
raving_nanza said:
go here for your original rom, just incase you **** up..
zzzz://wiki.xda-developers.zzz/index.php?pagename=HTC_Artemis
download uspl 1.11.cmon - click 'uspl 1.11.cmon' on my signature to download..
Click to expand...
Click to collapse
I am also trying to upgrade my MDA Compact III, and i went to the link mentioned by you. I found my ROM but the problem is that the website tm-phonedownloads does not exist any idea where else to get original ROM.
And where can i download the ROM u mentioned ur using.
Thanks
tm-phonedownloads not working-2
alas....!
i think i am out of luck or should i say...WE are out of luck. I ran a DNS check and it turns out that the domain registeration of site tm-phonedownloads.com has expired. And unless the owner renews it... we might see end of some great downloads
domain: tm-phonedownloads.com
owner: stuart mckenna
organization: iris
email: **************@iris-london.co.uk
address: 185 park st
address: N/A
city: london
postal-code: SE1 0PN
country: GB
phone: +079.50787751
admin-c: CCOM-498700 **************@iris-london.co.uk
tech-c: CCOM-27915 *******@titanhosts.net
billing-c: CCOM-27915 *******@titanhosts.net
nserver: not-renewed.joker.com 194.176.0.3
status: hold,expired <----- <------
Working Link
Ok i googled and searched the forum here is a working link for the original ROM, at least i guess it is.
It is for T Mobile MDA Compact III, with the following :
ROM:1.13.110.1 9/22/06
Ext ROM: 1.13.110.101
Boot Loader: 1.13.0000
rapidshare.com/files/73886070/ART_TMOUK_11311001_024990_WWE_Ship_R3.exe
...
ROM:1.13.110.1 9/22/06
Ext ROM: 1.13.110.101
Boot Loader: 1.13.0000
T Mobile MDA Compact III = ARTEMIS = P3300
ANDREW82 ROM HERE (DO USPL CMON FIRST!)
http://www.mediafire.com/?hm23wnzw0nw
(LOOK FOR WM6 THREAD IN THE ARTEMIS ROM SECTION AND GO THERE FOR PROGRAMS)