Windows Mobile 6.1 Pro
Palm Treo Pro
I am trying to force web traffic over a SSL VPN (CheckPoint SecureClient Mobile) through an internal proxy server but am not having any success. Has anyone done anything similar to this before?
From the mobile itself I am able to telnet to the proxy on the desired port once the VPN has been established but Pocket IE keeps popping up the error:
Cannot connect with current connection settings. To change your connection settings tap Settings.
I've definied the proxy in the Work Network profile and set that profile to be used for both Programs that connect automatically to the Internet... and to a private network......
If I change the setting Programs that connect automatically to the Internet.... back to My ISP then Pocket IE goes directly to Internet
Any ideas on how to make PIE realise that it is connected to a VPN and attempt to use the proxy?
Thanks
Jon
User Opera.. I never had an issue with a pretty similar setup.
Related
I've just set up a small wireless network at home through which I intend to use several devices to connect to the internet through my LAN!
The LAN gateway is running ISA 2004 and my home computer is running the necessary Firewall client (a completely secure connection with username and password)!
Now everything's working fine... the pocket pc hooks up just right and i can browse the network and do what I could probably do using my own personal computer BUT the internet doesn't work!
It keeps asking me for a username and password (which like i usually provide in internet explorer on my personal computer) which i do supply... three times in a row after which it gives me an error saying that ISA cannot authenticate me!
The home computer doesn;t run the internet without the firewall client, and i'm supposing the pocket pc is facing the same dilemma! is there any way to circumvent this issue? perhaps a mobile version of the isa firewall client?
Please help. Thanks!
afaik there isn't a mobile version of the firewall client.
I set my ISA server to allow anonymous internet access ,and set all my machines up as secure nat clients (set isa servers ip as default gateway, I use a dhcp scope to do this). There is lots of info on this on microsofts ISA server website, I'd suggest a look there first, or try a google for secure nat.
Good luck, works well for me but ymmv.
I would like to config my ppc to get online thru my office's internet.
But sadly, my office is using proxy server, a VPN, plus I'm on a domain.
On my ppc, I had applied all the necessary settings on proxy namely
proxy address and port number, and VPN such as site IP, user name and password for our Check point VPN.
On my desktop, the setting is set on The Internet but still failed.
Would it be the fact that I was connected as a "guest" during ActiveSync?
Can anyone shine some light on me please.
MovianVPN
You will probably need to download MovianVPN ($99.95) for use with firewalls other then Microsoft's, which is all the VPN client included with WM2003 supports.
I'm using an 8525 with VPN and Goodlink. What makes it complicated is that the Goodlink server requires me to use a connection with wap.cingular and the VPN server is only accessible with isp.cingular. AnthaVPN allows me to pick my connection independently of the connection set up in Windows comms. The problem is, after AnthaVPN connects, PIE yanks it back to the connection selected in Comms. Is there any way to make PIE use the connection that's currently in use? A registry setting, maybe?
(It seems like I saw some mention of this a while back, but I can't find it now...)
TIA,
Lewis
Hello,
I want to connect to my Company's VPN and read my e-mails.
My Company uses a Nortel Contivity switch to which I successfully connected with Bluefire Mobile Security VPN v2.7.5, Build 706 (IKE=DES+MD5+DH1; IPsec=3DES+MD5+LZH+PFS; NAT traversal active), using a cellular HSDPA connection. Now comes the bad part: I cannot configure Outlook to use the Exchange server nor the IMAP or POP servers (I tried with Flexmail 4 but with the same results) - it always say that the servers are not accessible. As far as I could figure it out, it seems that after the tunneling is operational, Outlook or any other software still tries to access the internet through the cellular connection (I tried to traceroot some addresses and it ALWAYS goes through the cellular line (not the tunneled connection).
What would be the correct settings in my connection manager so I could access the my Company's Exchange / POP / IMAP servers after I setup the VPN manually with Bluefire?
Thanks a lot!
DO you work for VZ ?? i too would like to connect to my vpn network ... I spoke to our techsupport and advised that wasnt possible ...just for bllackberry ... which i found odd ... i would be interested tofind out how to also
TheAlphonso said:
Hello,
I want to connect to my Company's VPN and read my e-mails.
My Company uses a Nortel Contivity switch to which I successfully connected with Bluefire Mobile Security VPN v2.7.5, Build 706 (IKE=DES+MD5+DH1; IPsec=3DES+MD5+LZH+PFS; NAT traversal active), using a cellular HSDPA connection. Now comes the bad part: I cannot configure Outlook to use the Exchange server nor the IMAP or POP servers (I tried with Flexmail 4 but with the same results) - it always say that the servers are not accessible. As far as I could figure it out, it seems that after the tunneling is operational, Outlook or any other software still tries to access the internet through the cellular connection (I tried to traceroot some addresses and it ALWAYS goes through the cellular line (not the tunneled connection).
What would be the correct settings in my connection manager so I could access the my Company's Exchange / POP / IMAP servers after I setup the VPN manually with Bluefire?
Thanks a lot!
Click to expand...
Click to collapse
!!!up!!!!!
when you configure your email account dont you specify which internet connection it should try to use? so shouldnt youspecify that your work conection is he connection that it should use to check mail.?
Hello,
I'm looking for sofware, which can act as a http(s) proxy server working on WM(sort of a 'SQUID' for WM).
My intention is to use it with internet sharing as I have 2 uplinks(faster LAN, but severely filtered + slow internet sharing on the device with full access).
The goal is to set up a proxy running on local adapter of internet sharing(192.168.0.1) so I can set this to desktop firefox(foxyproxy plugin) using wildcards(ex. Default->go by LAN, *.youtube.com -> go by 192.168.0.1).
Does any application for this exist? All attempts to search gave me only hints how to set proxy client on wm, not the server.