Related
please suggest me some tools which realise "autostart" for my magician. The tool should run a program when i turn the magicion on.
Thanks!
Check out sktools. That'll do it I think.
V
use MemMaid. really usefull tool
Thanks!
Maybe somebody knows also a small (freeware) program?
try search at http://pocketpcfreewares.com or http://www.freewareppc.com maybe there's some. anyway, you can allways add a shortcut to app in the windows\startup dir (use totalcommander for this).
@dddrko:
as far as i understand, the startup folder starts only after reset, not at powert button...
This is a nice tool: Event driven application/command execute !!
http://www.kent7.com/holly/wakeapp/
It can start an application or run a command at about any 'event' = Meaning, whataver happens :
On a specific time or when ;
PC card changed
othe IR device discovered
Network (dis)connected
AC Power On/Off
full device data restore
RS232 conection made
data sync finisched
system time changed
timezone changed
Device wakes up
Haven't tested it yet, but looks mighty powerfull !
Good spot. These are standard events for the PPC, so SKTools, MemMaid and the lovely WakeApp should support them all.
V
jpiek said:
This is a nice tool: Event driven application/command execute !!
http://www.kent7.com/holly/wakeapp/
It can start an application or run a command at about any 'event' = Meaning, whataver happens :
Haven't tested it yet, but looks mighty powerfull !
Click to expand...
Click to collapse
Thats exactly what i mean, BUT its not working on my Magician...
I can see and set the events, but the program does not start.
ReflexNPG said:
jpiek said:
This is a nice tool: Event driven application/command execute !!
http://www.kent7.com/holly/wakeapp/
It can start an application or run a command at about any 'event' = Meaning, whataver happens :
Haven't tested it yet, but looks mighty powerfull !
Click to expand...
Click to collapse
Thats exactly what i mean, BUT its not working on my Magician...
I can see and set the events, but the program does not start.
Click to expand...
Click to collapse
Silly question maybe, but have you tryed resetting ?
Like i said, i haven't tested it myself yet...
from readme
** OS
PocketPC 2002
edit: tested it on my magican (wm03se), it works. great tool
shine on
@tom0_1:
could you please tell what exaxtly is working? Events,timer, ...?
OK, other way,
Example :
HKLM\Software\Microsoft\Shell\Event\Dock\Inbox
Command=Tmail.exe -RunInBKG
(retrieves new mail when Docked/Activesync on)
Also found :
HKLM\Software\Microsoft\Shell\Events\PowerOn\WMP
Class= WMP for Mobile Devices
On= 32837
(Resumes playing WMP after power on)
I guess adding a key in ether wil get you what you want also...
@jpiek: thanks, i will try it
About memmaid - i dont think that this tool can add entries to the notification queue...
Background: i have an old Magician (with long white beard), and i want to use it as remote control with Salling Clicker.
This program uses bluetooth and every time i turn on the device, it should start Salling Clicker (or bring to foreground) and reconnect the bluetooth connection (so my girlfriend can focus on what she wants to hear or see...)
i tried three items and all worked:
event by power on
event by changing sd card
timer
shine on
tom0_1 said:
i tried three items and all worked:
event by power on
event by changing sd card
timer
shine on
Click to expand...
Click to collapse
Ow Yeah, great... :mrgreen:
Repeat events?
With both memmaid and wakeapp, I can get a program to run once on a timer, but what I want to do is get the program to repeat daily at the same time. Memmaid seems to lack the ability to choose repeat; wakeapp shows "no end date" when one looks at the entry, but the notification disappears after it runs.
Memmaid can't do create recurring notification
I have verified with dinarsoft that memmaid can't put a repeating notification to run a program. The problem, they say, is that there is no facility to repeat and the way other programs do it is to write a few days worth and when that gets close to the end, write a few more.
Given this, wakeapp almost certainly can't either, since it seems to just be a "notification writer".
Can SKSchema run a program at the same time every day? An if so, can it then minimize the program?
Yes,
SKSchema can do repeating program runs, even do it only on Tuesdays or on the first of the month.
This is a nice tool: Event driven application/command execute !!
http://www.kent7.com/holly/wakeapp/
It can start an application or run a command at about any 'event' = Meaning, whataver happens :
On a specific time or when ;
PC card changed
othe IR device discovered
Network (dis)connected
AC Power On/Off
full device data restore
RS232 conection made
data sync finisched
system time changed
timezone changed
Device wakes up
Haven't tested it yet, but looks mighty powerfull !
Similar tools (non-free, but pretty cheap) are:
MemMaid - http://www.pocketgear.com/software_detail.asp?id=14279
SKTools - http://www.pocketgear.com/software_detail.asp?id=14288
Basically they allow you to modify the Notification Queue
Thanks Johan. This is what I was looking for a long time.
See it as the Task Scheduler op windows xp. Exept you can also use
system events.
Like playing a WAV file if you turn the device on....etc
One remark to the maker: make the font bigger in the remove section. It is very hard to read which event you are about to delete. Tricky...
Until then is use the free dbview.exe to do this ;O)
Tweakradje
I just figure out a way to listen to music via an BT earphone, no need to use BTAudioToggle or what so ever:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
--> Path = erase everthing
VoiceCmdDuration = 86400 (DEC) = 24 hours
Now, open your WMP, play the music and click the Answer Button on the BT and enjoy .
WARNING, this way will disable the voice dial via BT , so it's up to you to decide
c'mon guys, give some feedback, does this work for everybody?
I like voice dial AND my podcasts via BT on my 8525 and earpiece.
Hey guys, just wanted to give a post here. This setup works fine for me. I use both BlueMusic 2.0 and Cyberon Voice command with no problems. I used to do this with WM5, since I upgraded to WM6 I've had to make a couple of reg tweaks to get things to work properly but they work fine now. (I had to change the VoiceCmdDuration to 86400, and I also had to add in VCdialer.exe (or whatever its called) to the HKLM\Software\OEM\VoiceCommand settings ...)
To enable the sound I just hit the BlueMusic play button, and then hit the button on my headset. If I hit the button again, the sound comes out of the phone speaker, and if I turn BlueMusic off (stop button) I can use Cyberon Voice Dialer ... Perfect for me!
How do you access the registry on the 8525 to do this?
You get a registry editor... Such as total commandor (you can google it)
darkgemini said:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
--> Path = erase everthing
VoiceCmdDuration = 86400 (DEC) = 24 hours
Click to expand...
Click to collapse
I followed your directions but you're not completely clear on the second part of your instructions.
Do we create a new registry entry? If so what type? There's a bunch different options. Since we're messing with the registry, I really don't want to mess it up.
this is how i got mine to work.
this works awesome
darkgemini said:
c'mon guys, give some feedback, does this work for everybody?
Click to expand...
Click to collapse
this works great on my Hermes /att 8525 running att rom 3.62.502.3
Here's my deal... If I make the registry edit, will the bluetooth continue to run, or toggle automatically? I'm thinking that if it's ALWAYS on, the battery would run down fairly quickly.
I'll not be using it for music (at least not most of the time), but for turn-by-turn directions with my GPS program.
I would love for the same ability as MS Voice Command (turn the device ON when it's ready to deliver information, then OFF again.)
Any help?
question
just want to say that this works fine and tranfers the music to the bt earpiece fine but after a few seconds it goes back to the phone. i think the problem is the VoiceCmdDuration entry. I assume this is a DWORD value?? do i put it in the same folder as the path entry that was deleted? would love for this to work properly so i dont hav eot buy a big headset to listen to music..
PLEASE POST BACK
darkgemini said:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
--> Path = erase everthing
VoiceCmdDuration = 86400 (DEC) = 24 hours
Click to expand...
Click to collapse
what does the bolded section mean??
I navigate to the HKLM\software\oem\voicecommand folder
What is "-->" am I adding a new path??
Cheers,
I Tried on HTC Diamond Touch
I have a HTC Diamond Touch. Very happy with it.
-I downloaded the "Total Commander" cab file for "Pocket PC" to my PC.
http://www.ghisler.com/pocketpc.htm
(Select the CAB for arm/xscale/pxa)
-I installed Total Commander ( "TC" ) on the HTC Touch Diamond ;
Copied the cab file to HTC'sdirectory "My Documents" using the explorer in Active Sync,
then moving over to the HTC and started HTC's explorer,and finding the cab file,
and tapping on it...then its installed)
-Started "Total Commander" ("TC") on the HTC.
Yes, looks a bit like Norton Commander for Windows...
Then navigating in the TC address bar as follows;
-\\Plugins
then
\\registry
then the rest looks like folders, but is actually registry "levels" or "subkeys" (Scopes in xml ??) ;
->HKLM ( I guess this is short for HKEY Local Machine....????)
->Software
->OEM
Path = erase everthing
VoiceCmdDuration = 86400
(Path and VoiceCmdDuration was already there....just had to change the values)
Then I exited and Power Off->Power On
Then start Media Player
Tried to click on the buuton on the earpiece.
I have a "Plantronics Voyager 510S BlueTooth EarPiece".
But the music comes out on the HTC speaker....WAIT; Look at next post!
WAIT: HTC Touch Diamond WORKS!!!!
It works!!! I am now playing Audiobooks on mediaplayer, sound comes out
on Bluetooth EarPiece!!!!
I had turned off bluetooth......turned it on...all ok!!!!!:
Thank you! This means I dont need to buy an "A2D" earpiece....
[email protected]
is there any way to automatically turn on Bluetooth while the power cable is connected to the phone? Maybe with mortscript?
This would be a reaaly great enchancment.
It could automaticaly turn on Bluetooth when you connect the phone to the charging cable in the car. (For Communication with radio or headset)
-----------------------------------------------------------------------
I will attach the newest Version of my Script in this post....
from: 12-07-07
I found out that we can check if the device is charging at the moment in mortscript with :
x = ExternalPowered()
but what about turning on bluetooth?
u can call the bluetoothtoggle program on checking externalpowered...u can easily find this prog on xda-developers...
otherwise writing one urself shudnt take more than a few minutes...
I'm very Proud of me =).....
i got it workin.... this is my script...
Code:
y = 1
While( y = 1 )
x = ExternalPowered()
if (x = 1)
Run( "\Programme\vijay555\VJVolubilis\VJVolubilis.exe", "-bluediscoveron" )
EndIf
if (x = 0)
Run( "\Programme\vijay555\VJVolubilis\VJVolubilis.exe", "-blueoff" )
EndIf
Sleep (5000)
EndWhile
If anyone nows how to do it better... let me know
Damn.... theres a ****ing bug =)...
if i enable bluetooth without charging cable... its automatically disabled =)
have to think about it =)
ok i've got it now
Code:
y = 1
While( y = 1 )
x = ExternalPowered()
if (x = 1)
Run( "\Programme\vijay555\VJVolubilis\VJVolubilis.exe", "-bluediscoveron" )
While( x = 1)
x = ExternalPowered()
sleep(5000)
EndWhile
Run( "\Programme\vijay555\VJVolubilis\VJVolubilis.exe", "-blueoff" )
EndIf
Sleep(5000)
EndWhile
Fracoon said:
I'm very Proud of me =).....
i got it workin.... this is my script...
Code:
y = 1
While( y = 1 )
x = ExternalPowered()
if (x = 1)
Run( "\Programme\vijay555\VJVolubilis\VJVolubilis.exe", "-bluediscoveron" )
EndIf
if (x = 0)
Run( "\Programme\vijay555\VJVolubilis\VJVolubilis.exe", "-blueoff" )
EndIf
Sleep (5000)
EndWhile
If anyone nows how to do it better... let me know
Click to expand...
Click to collapse
try this.. have been a long time since i coded but i think this should work
do{
if(ExternalPowered())
Run("\Programme\vijay555\VJVolubilis\VJVolubilis.exe", "-bluediscoveron" )
Run( "\Programme\vijay555\VJVolubilis\VJVolubilis.exe", "-blueoff" )
Sleep(5000)
}while(1);
hmmmm....
It themes like nobody is interested in this... but it would be real great if someone could give feedback about this script... i want to know if anything in there could be better... feedback pls
Thanks for this Fracoon, it's much appreciated. gonna start using it over the next few days on my hermes.
If you know...Whats the difference in battery life while having this poll to see if the power is connected? have you noticed anything?
Cheers again.
Rochey
... Works EXTREMELY well ...
Fracoon:
AWESOME!
This works REALLY well, hats off to you!
Thanks.
Two ideas: (Note, I have not used the script, as I'm between phones at the moment. My Kaiser is on order... )
One: Rather than looping in between turn-on and turn-off, each time you go through the loop save the current power state. On the next time through the loop, check if the state did an off-on or on-off change. Only take action during a state change.
Two: A second feature some may want is to keep Bluetooth on after power disconnect if it was on before power connection. Similar to the last solution - Have a state variable that remembers whether BT was on prior to power connection, and don't turn it off if it was. Not sure how one would check the BT state though.
Hi Fracoon,
I have made a mod to your code to only enable bluetooth on AC power if Bluetooth isn't on. It also won't turn bluetooth off when you disconnect AC power if it was already on before.
You just need to change the paths to Blue.exe.
cheers
Rochey
Code:
y = 1
While( y = 1 )
Bluetooth = RegRead("HKLM", "System\State\Hardware", "Bluetooth")
if (ExternalPowered() = 1 && Bluetooth = 8)
Run( "\storage card\my documents\personal\autoblue\blue.exe", "-bluediscoveron" )
While(ExternalPowered() = 1)
sleep(5000)
EndWhile
Run( "\storage card\my documents\personal\autoblue\blue.exe", "-blueoff" )
EndIf
Sleep(5000)
EndWhile
Hi,
Does anyone have a compiled version of this, or can you tell me how I would go about implementing it on my ipaq? This is something I'd really like to have working!
Thanks
Download MortScript from http://www.sto-helit.de/.
Install the correct cab file on your device, for me this was "MortScript-4.1-PPC.cab".
Download VJVolubilis from http://www.vijay555.com/?Releases:VJVolubilis
Install the cab file on your device
Save the script from Rochey13 as a MortScript file, for example bluecharge.mscr and put this file on your device.
Modify the script to point to \Program Files\vijay555\VJVolubilis\VJVolubilis.exe.
Test the script by tapping it, it will be started by mortscript.exe.
If it is OK, you might want a shortcut in \Windows\Startup.
Thanks a lot for bringing the script so my headset will now automatically connected to my phone.
Thats great thanks!
Excellent stuff this worked really well for me 1st time. Please is there a method of enabling A2DP at the same time? I have a new Kaiser and I want to script it to enable BT and A2DP. Any ideas?
wensing said:
Download MortScript from http://www.sto-helit.de/.
Install the correct cab file on your device, for me this was "MortScript-4.1-PPC.cab".
Download VJVolubilis from http://www.vijay555.com/?Releases:VJVolubilis
Install the cab file on your device
Save the script from Rochey13 as a MortScript file, for example bluecharge.mscr and put this file on your device.
Modify the script to point to \Program Files\vijay555\VJVolubilis\VJVolubilis.exe.
Test the script by tapping it, it will be started by mortscript.exe.
If it is OK, you might want a shortcut in \Windows\Startup.
Click to expand...
Click to collapse
You could also just very easily configure PhoneAlarm to switch to your desired profile, ones you come into your car, or in a specific region or at a specific time. Then, you can let PhoneAlarm turn on your bluetooth/application/sound settings etc. Very usefull, and very easy. I think it will also be much more performant than running such a looping script all the time.
good luck!
VOODOOS!L said:
You could also just very easily configure PhoneAlarm to switch to your desired profile, one you come into your car, or in a specific region or at a specific time. Then, you can let PhoneAlarm turn on your bluetooth/application/sound settings etc. Very usefull, and very easy. I think it will also much more performant than running such a looping script all the time.
good luck!
Click to expand...
Click to collapse
PhoneAlarm is a nice tool, but isn't free.
And IMO performance isn't needed when powering on the phone when it is in craddle in my car
The script does the job within a couple of seconds. I even added a rotate and question to start TomTom to it.
slarty01 said:
Excellent stuff this worked really well for me 1st time. Please is there a method of enabling A2DP at the same time? I have a new Kaiser and I want to script it to enable BT and A2DP. Any ideas?
Click to expand...
Click to collapse
Maybe you can use A2DPToggle to start ad2p.exe with the proper parameter.
http://teksoftco.com/forum/viewtopic.php?t=1626
VOODOOS!L said:
You could also just very easily configure PhoneAlarm to switch to your desired profile, one you come into your car, or in a specific region or at a specific time. Then, you can let PhoneAlarm turn on your bluetooth/application/sound settings etc. Very usefull, and very easy. I think it will also much more performant than running such a looping script all the time.
good luck!
Click to expand...
Click to collapse
Is it possible using PhoneAlarm to switch automatically to car profile once we get into our car?
Hey guys,
* UPDATE * - I now realize that the first version of this script did not work. Problem should be solved as I've updated it to use VJVolubilis to send the Bluetooth ON command, rather than change the one registry entry.
Click to expand...
Click to collapse
I write this as a newbie who's just written his, well, 2nd MortScript. I was fed up with the very common problem that everyone is experiencing, which is their Bluetooth being randomly shut off on the X1.
What I did to resolve the problem (temporarily, until SE provides a proper fix), is to write this MortScript that will run resident in memory (uses only about 90kb, a non-issue with our massive X1 RAM) and poll the status of Bluetooth every "X" (user-defined) minutes. It will then send a command to VJVolubilis turning BT on. If it's already on still, then nothing happens. Note that when it 'turns on' Bluetooth, it will put it into the normal status of Connectible, but not Discoverable, or any other state for that matter. It should only really be reset to "On (Connectible)" from Off because if you were currently using your BT (for ActiveSync, A2DP) then it should not turn itself off in the first place. I think this was the safest bet since there are MANY 'states' for BT to be in.
You will need a copy of MortScript installed in order for this script to work. You can get MortScript at the following link:
http://sto-helit.de/index.php?module=download&entry=ms_program&action=list
Once you've installed MortScript (or if you already had it installed), simply place the "X1FixBluetoothPower.mscr" file in your \Windows\StartUp folder so it will be run upon every boot up, and stay running.
For people who prefer to look at the script contents, then create their own, below is what's contained within my "X1FixBluetoothPower.mscr" file:
Code:
# Xperia X1 Bluetooth Always ON Script
#
# NOTE that you will NEED a copy of VJVolubilis which is a tiny .exe and can be found here by the great Vijay555:
# http://www.vijay555.com/vj/releases/vjvolubilis/vjvolubilis.cab
#Define the interval (in minutes) that BT State will be checked
#Edit "checkmins" number below:
checkmins = 5
#Begin an endless loop that checks vijay555's app every X mins
While( ProcExists( "device.exe") )
Run("\program files\vijay555\vjvolubilis\vjvolubilis.exe"," -blueon")
Sleep(checkmins*60000)
EndWhile
Note that I use a default time of 5 minutes, however on my own device I actually use 1 minute. I have a hard time believing that this will be any sort of 'performance' limiter when it's run, so every 1-2 mins shouldn't be a problem. If you want to edit the minutes, simply open the .mscr file up in Notepad before you dump it on your device (or alternatively, edit it on your X1 with something like Total Commander).
Anyways, this is one of my first scripts written in MortScript, so I hope you guys enjoy it. If anyone else can suggest any optimizations to my 'code', then by all means, please post in this thread.
Below you should find the attachment to the actual .mscr file. Please leave your feedback as to how well the script works for you.
Thanks guys, trying to give back to this amazing community whenever I can!
Well done. Mortscript is the future!
is it possible to add an entry in your skrip, that a stereoheadset connected in the A2DP mode automaticly?
Download A2DP Toggle: http://www.teksoftco.com/index.php?section=freeware
Install and disable the Today-plugin.
Then add a line to the mortscript:
Code:
Run( "\Program Files\Teksoft\A2DPToggle\a2dp.exe", "-a2dp:on" )
scar45 said:
Hey guys,
I write this as a newbie who's just written his, well, 2nd MortScript. I was fed up with the very common problem that everyone is experiencing, which is their Bluetooth being randomly shut off on the X1.
What I did to resolve the problem (temporarily, until SE provides a proper fix), is to write this MortScript that will run resident in memory (uses only about 90kb, a non-issue with our massive X1 RAM) and poll the status of Bluetooth every "X" (user-defined) minutes. If it discovers that BT is off, it will turn it on. If it's already on, then nothing happens. Note that when it 'turns on' Bluetooth, it will put it into the normal status of Connectible, but not Discoverable, or any other state for that matter. It should only really be reset to "On (Connectible)" from Off because if you were currently using your BT (for ActiveSync, A2DP) then it should not turn itself off in the first place. I think this was the safest bet since there are MANY 'states' for BT to be in.
You will need a copy of MortScript installed in order for this script to work. You can get MortScript at the following link:
http://sto-helit.de/index.php?module=download&entry=ms_program&action=list
Once you've installed MortScript (or if you already had it installed), simply place the "X1FixBluetoothPower.mscr" file in your \Windows\StartUp folder so it will be run upon every boot up, and stay running.
For people who prefer to look at the script contents, then create their own, below is what's contained within my "X1FixBluetoothPower.mscr" file:
Code:
# Xperia X1 Bluetooth Always ON Script
# by George Merlocco of protogenlabs.com
#Define the interval (in minutes) that BT State will be checked
#Edit "checkmins" number below:
checkmins = 5
#Begin an endless loop that queries the BT registry entry every X mins
While( ProcExists( "device.exe") )
#Define variable to check status of Bluetooth via registry
BluetoothStatus = RegRead( "HKLM","System\State\Hardware","Bluetooth" )
#if Bluetooth DWORD = 8, BT is OFF so turn it on (set to 9)
If ( BluetoothStatus = 8 )
RegWriteDWord( "HKLM","System\State\Hardware","Bluetooth", "9" )
EndIf
Sleep(checkmins*60000)
EndWhile
Note that I use a default time of 5 minutes, however on my own device I actually use 1 minute. I have a hard time believing that this will be any sort of 'performance' limiter when it's run, so every 1-2 mins shouldn't be a problem.
Anyways, this is one of my first scripts written in MortScript, so I hope you guys enjoy it. If anyone else can suggest any optimizations to my 'code', then by all means, please post in this thread.
Below you should find the attachment to the actual .mscr file. Please leave your feedback as to how well the script works for you.
Thanks guys, trying to give back to this amazing community whenever I can!
Click to expand...
Click to collapse
Brother, I install the script installed in phone but when phone boot up, the bluetooth is not turn on? Anything I missed out?
Hi,
I notice that you have added another VJVolubilis and X1FixBluetoothFinal-MSCR-v2.zip, do we need to uninstall the MortScript we installed earlier?
Do advise us accordingly, thanks.
chongbh said:
Hi,
I notice that you have added another VJVolubilis and X1FixBluetoothFinal-MSCR-v2.zip, do we need to uninstall the MortScript we installed earlier?
Do advise us accordingly, thanks.
Click to expand...
Click to collapse
yes chongbh, you can remove the other (v1) script completely by simply deleting the file. Next, grab the .cab installer for Vijay's app, install it to the PHONE memory (only like 15kb), and unzip the X1FixBluetoothFinal-MSCR-v2.zip into your \WINDOWS\STARTUP folder. Simple as that.
Further to this, you can customize how frequently you want the script to run which will in turn run VJVolubilis + the argument to turn BT on.
On a side note, I'm not quite sure why the previous script didn't work. I do have a feeling that it's because SE uses a proprietary Bluetooth stack which ignores that change to the single registry entry. I would love to find out how VJVolubilis and Wisbar Advance Desktop trigger Bluetooth states, because they still do work with the X1.
Anyways, this patchwork shouldn't have to last very long (not too bad still as MortScript.exe uses peak 100kb memory while running), and we see an official CAB update from Sony Ericsson addressing the well-known issue. Hope this helps some of you hold over till then!
Guess for some newbie might be in the lost as in what are the proper procedures :
1) Download and install the MortScript.cab into PHONE Memory :
http://sto-helit.de/index.php?module...am&action=list
2) Download and install the Vjvolubilis.cab into PHONE Memory :
http://www.vijay555.com/vj/releases/vjvolubilis/vjvolubilis.cab
3) Download the X1FixBluetoothFinal-MSCR-v2.zip from the 1st post of this thread
4) Unzip the X1FixBluetoothFinal-MSCR-v2.zip into your X1's phone memory location : \WINDOWS\STARTUP folder
5) Reboot your phone and your Bluetooth should stay ON forever
I have tested on my X1 and it works great! Thanks to Scar45 for your effort and guidance.
Hi,
the \Windows\Startup folder mentioned - is that the same as \Windows\Autostart ? Or should I create a \Windows\Startup, because there is no such folder at the moment in my X1...
Thanks for enlighten me on why my X1 keeps shuting off the Bluetooth all the time...
/Stefan
Thanks a lot
I contacted Sony Ericsson because my Bluetooth headset was "detecting" the bluetooth dropped and when I looked on the X1i the Bluetooth was turned off.
They told me to buy another BT headset, nice to see I wasn't crazy
brago said:
Hi,
the \Windows\Startup folder mentioned - is that the same as \Windows\Autostart ? Or should I create a \Windows\Startup, because there is no such folder at the moment in my X1...
Thanks for enlighten me on why my X1 keeps shuting off the Bluetooth all the time...
/Stefan
Click to expand...
Click to collapse
Not a problem Stefan, and yes, you can create the \Windows\StartUp folder if it isn't there already. I would test it by copying ANY shortcut in there and seeing if it runs that program after a soft-reset. If that's all good, put the .mscr script in the \Windows\StartUp folder and you'll be good to go.
lmame said:
Thanks a lot
I contacted Sony Ericsson because my Bluetooth headset was "detecting" the bluetooth dropped and when I looked on the X1i the Bluetooth was turned off.
They told me to buy another BT headset, nice to see I wasn't crazy
Click to expand...
Click to collapse
Apparently they are aware of the issue, but I'm sure that knowledge doesn't trickle down to the Customer Service Reps until a proper fix has been released.
Glad this script fix could help a lot of ppl out...thanks again to Vijay and Mirko for the tools needed!!
Yes definitly those tools sound fun ^_^
Edit:
Btw, I saw something weird.
When the BT is dropping, if I delete my BT headset and do the pairing again (resetting the pairing also headset side), it seems the BT doesn't drop until next soft reset or until next time the headset is shut down.
Is Sony even aware of this issue? I called my local Sony X1 support and they were not aware this was even an issue. I think more people need to complain about randomly dropped bluetooth connections!
Yeah!
Thx a lot - my bluetooth-music-streaming works now!
But is it right - I have to choose every time when I connect to the radio in my car - "use as stereo-headset" in the settings?
GREAT JOB! THANK YOU!!!
A2DP Toggle
Epidemie said:
I have to choose every time when I connect to the radio in my car - "use as stereo-headset" in the settings?
Click to expand...
Click to collapse
See A2DP Toggle in post #4.
You can use it together with Mortscript to create a "connect A2DP now" button, instead of going to the bluetooth settings.
wensing said:
Then add a line to the mortscript:
Code:
Run( "\Program Files\Teksoft\A2DPToggle\a2dp.exe", "-a2dp:on" )
Click to expand...
Click to collapse
Thx 4 your help - one last question, i´m sorry ...:
How can I add a line to mortscript???
help needed ...
Still need help - does no one knows the answer, pls?
Thx,
Epi
this works great. thanks.
Epidemie said:
Still need help - does no one knows the answer, pls?
Thx,
Epi
Click to expand...
Click to collapse
Hey Epi,
Sorry no one got back to you, but it's easy to add a line to the MortScript file. Just open the .mscr file in any text editor (I use the built-in one in Total Commander) and add the line in exactly as wensing has described.
Save the file, do a soft-reset, and you should be good to go!
Epidemie said:
Still need help - does no one knows the answer, pls?
Thx,
Epi
Click to expand...
Click to collapse
The script in post #1 is to restart bluetooth if it is (accidently) stopped.
You can add a line to that script to reconnect "bluetooth stereo".
But then it tries to reconnect each 1 minute.
You can also install A2DPToggle and create a shortcut to the exe:
\Program Files\Teksoft\A2DPToggle\A2DP.exe
Then you can put that program on your today screen easily.
And if you want a nice icon with that shortcut, you can change the shortcut file to:
53#"\Program Files\Teksoft\A2DPToggle\A2DP.exe" "-a2dp:1"?\Program Files\Teksoft\A2DPToggle\settings.exe,-0