SPV M5000 no sim card insert sim card - JASJAR, XDA Exec, MDA Pro General

Hello.
Im wirting to You because I know that You all cann help Me.
I buy a M5000 from my friend.
After two weeks the thelephone go crazy.
FIrst case:
1. If im go to the comm manager and i wan to swith on WIFI the WM is thinghing for a while and then notihing. The wifi is not Turned ON.
Can You tell me what coud it be? I upgrade the with WM 6.1 8.5 Tomala version and it starts to work after reset (it was working werry good.). Then I connect the M5000 to the computer and synhronise it so that i have my contact back and after that the wifi works. but if i go to suspend mode after ON i can not turn on the wifi again?
I tray the WM 6.1 tomala 8.7 too. It is doing that same.
2. THat same go with my sim card. After 2 weeks My M5000 did not see the sim card? I put som paper at sim card (under the batery) and it work after restart wor a while. After 5 minuts shows me "the sim card is miising" insert SIM card. !!!
And i cleaned the sim card and the pins what are reading the sim card but it do not help.
I read at some Thread on XDA forum that i schoudl clean the mainboard in the telephone - it can help for problem with SIM Card. If it is so, then with what can I do it?
Now i'm can not use any WIfi and any telephone with M5000 (Uniwersal).
If You cann then write what i should to do. Because I pay for that telephone big casch and I can not use it .
My spv hase:
BL: 1.01
Rom version: D.08.70 TML WWE
Rom date 07/18/08
Radio version: 1.18.00
Protocol wersion 42.45.P8
G3
Ram 64MB
Flash size 128 MB
06.04.2009
Hello again.
So what I did.
I take out the MainBoard form My M5000. I cleaned it whith special preparat for electronical device it call KONTAKT Cleaning preparat.
I put all things together and I turnet on the telephone. For luck it works .
The spv m5000 see the sim card. But only for feew hours. After one day the mesage "the sim card is miising" shows on screen. So I take restart the phone and again it find the sim card. After 5 mayby 8 hours the mesage "the sim card is miising" shows again.
I wass angry.
I took the newst TOMALA Roms WM6.1 wer. 8.7 and i install it on the m5000.
The situation was that same. On day it works perfektly after one day it shows the same mesage !!!
I take smol paper card and put it under the batery on sim card. I's working for a feew hours and then that same mesage shows the sim card is miising!!!!
Mayby You have some ideas what cann I do?
aha... the telephon call 112 for emergensy call. So the calling system works. Only it do not see the sim card.
If You have ideas for that reason pleas wirte it, i will check it.
THANK You for HELP.

Related

"Insert Sim card" message

Hi to all.
Last week I upgrade my Qtek 9000 with i-mate rom 1.30.......
The rom is really very good, vrey stable. However last night appears the message "insert sim card". I chande the sim but the problem don´t go away. Made de downgrade of radio rom and nothing.
What can I do?
Thanks
Paulo
Maybe SIM card connection has dust or doesnt connect properly.
Try cleaning the SIM card connectors on the device and on the SIM card itself...
having same problem '
if solved do share,
I have the same problem with my HTC Wizzard.. Please, help!

i-mate JAMin SD not working - NEW PHONE!

G'Day!
I managed to pickup a JAMin to replace my aging O2 XDAII Mini. (*I wanted WiFi)
But on setting up everything again, the SD slot has junked out on me in around 2 hours of usage from new!
Ive got 2 cards - SanDisk 2GB Ultra II & Lexar 256Meg - both of which worked for the 1st test, now both are not recognized by the phone.
My SD reader on the computer says and plays them fine. - In the ABOUT of the phone it says that the "EXPANSION SLOT" is not in use with any card installed.
I've tried firmwares:
1. RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
2. JAMin_WWE_2130923_21309112_020720_ship
3. JAMin_WWE_213923_2139123_022021_ship
.....With no luck....infact Im stuck on the RUU one now with the NBF file error now! and still no SD able to be read in the phone!
PLEASE give me guidence before this becomes many...many...MANY bits of plastic!!! :evil: :evil:
___LEO____
Try reformating your SD card in the PC card reader. It will erase all data, so back it up, but it might work.
Cheers.
UPDATE....
Thanks krale!
But the SD's work fine in my Magician and my SD reader.
I've tried that though...just in case.
No deal.
I've found a Telstra patch on the iMATE site in AU....and strangely it started to work for a bit.
It now will lock up for no reason and black screen.
Soft-reset will work, and I got to watch/try out things on it!!! YAYAYA!
Then 10 mins into watching a .avi show it froze and now will no longer see any SD's again.
AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
In order to get a repair I think I should downgrade its OS/firmware to the original imate versions. (The current one is a DOPOD).
But it gives me the ERROR [296] : UPGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get newer NBF file.
How do you downgrade the OS/Firmware versions?
THANKS ALL!!!
You'll be stuck in RUU (or DOPOD) ROM cause is 2.15.13.27 and it's newer than iMATE 2.13.09 you can't downgrade if you have uoyr PDA CID locked. You've have to upgrade to a ROM like the DOPOD one that you have or to one with upper number i.e. 2.15.14.00 but no to an older one.

Issue with a dual sim card

Hi everybody,
I've got a dual sim card in my Qtek 9100, with a little application that is automatically installed in the Programs Files "Dual SIM Card".
Previously, with ROM RUU_Prodigy_2080702_102_11310_QTEK_FRA_Test, it worked very fine.
Now, with the 2.17.7.6 FRE rom (radio 02.07.10, ext ROM 2.17.7.106), when I switch from SIM 1 to SIM 2, it's OK, I can enter the PIN code for the SIM 2. But when I want to switch from SIM 2 to SIM 1, the screen to enter PIN code doesn't display, and I have to make a soft reset.
Does someone know if I have to change my ROM or my Radio ROM ?
Thanks, and excuse me for my poor level in english !!!
CyberF

Problem with MMC card

Hi.
I have problem with my universal and mmc cards ( i didn't try SD card yet).
When i set up camera to store photos on Storage Card. after taking photo application show something like "Storing image..." and I must wait and wait but app store this photo on card only when i remove it from slot and insert it again...
Please help
Hi,
i had the some Problem after upgrading my MDA Pro to AKU 3.3 of T-Mobile.
In my case after some time browsing my MMC or SD-Card was boring slow.
After removing it and pluging it in again I was able to use ist a few minutes.
In my Case only a Downgrade to AKU 2 solved the Problem.
But now my Wifi Connection does not work.
indeed, it can by cause of this problem. i also have TMobile firmware with AKU3.3
but maybe, if in other 'brandings' than TMobile this problem isn't exist then
maybe fault is on customization files on extended rom??
------
than folowing this posibility I unhided extended rom
renamed autorun.exe , RESET... and i will test it...
results soon
Hi,
after installing the normal T-Mobile ROM with all the Brandings i installed it and made the Soft-Reset before the brandings had been installed.
But unfortunately the problem was the same. So I dont think that it is a problem because of the Brandings.
Yes, You have right. It isn't because brandings...
wishmaster270: are You use MMC or SD card? and what type/model/manufacturer?
Hi,
i am using two Cards. One MMC with 1GB from mogu and one MMCplus Turbo Card with 2GB from AData.
similar problem as well
Just upgraded to latest Tmo ROM and have a similar problem my MMC card takes about 5-6 seconds to read when viewing it in file explorer and sometimes I can't even view it in Windows Media when trying to play music. But if eject and reinsert it will show all files.
In my case it takes between 20 and 60 seconds.
But anyway it seems to be a Problem with the T-Mobile ROM.
Perhaps it would be a good idea to write a few mails to T-Mobile Support.
So, i writing email to T-Mobile support...
and waiting...
anyway what is the best downgrade ROM with working SD/MMC??
don't want to downgrade
If the SDHC patch works on WM5, would rather use it and have more storage then downgrade
Hi,
I tried the SHDC and the Advanced Storage Card Handlig.
Unfortunately both did not work.
Downgrade to AKU2 worked fine for me. But its slower and I am not able to connect to my access point.
Well... T-mobile answered for my email...
Thank you for taking the time to contact T-Mobile
[...]
it looks like that the memory card is not responding properly.
Please try the following to ensure that miniSD memory card is detected
by the T-Mobile MDA:
1. Tap the power button to turn off the screen.
2. Remove the miniSD card.
3. Verify that the card is labeled 'miniSD'.
4. Carefully re-insert the miniSD all the way back into the MDA.
5. Verify that the screen wakes up when you insert the miniSD memory
card.
o NOTE: If it does not wake up, the miniSD card may be defective.
If the memory card is not responding, you need to either format the
memory card or try different memory card in your phone. If the problem
persists, please write or call us back with your observations and we
will be happy to help you further. [...]
Click to expand...
Click to collapse
so I must write reply and add more details because it looks to problem isn't known by service... :/
and again:
... as you are not a T-Mobile customer, we are unable to offer you
continued support. You may contact HTC, the manufacturer of the device
for further assistance.
Click to expand...
Click to collapse
Hi,
are you using a T-Mobile MDA Pro? Or the original QTek?
Can you tell me the email adress you wrote to? I am not a T-Mobile user, too. But my MDA is from T-Mobile.
But i am out of guarantee.
I using T-Mobile MDA Pro with 'nice' big T-Mobile logo on board ;-)
Under battery on sticker i have: 'PU10' and 'HTC Innovation'.
I wrote to address: <customercare(at)t-mobilesupport.com>
from page: http://support.t-mobile.com/productSelector.html
Is possible to update this hardware with ROM of other (for example O2) branding????
i have one of them: universal_rom(o2_2.5wwe_aku3.2_b12).rar
Ok. Problem is solved.
I'm using Helmi_UNI_AKU3.5_v1.3.1 ROM from 2 days and is working very good
Hi,
yesterday i tried the aku 3.3 again because i had a sd card to test width.
It only seems to be Problem with MMC cards. Perhaps i would buy me a 2GB SD Card for about 15€.

SPV Universal M5000 no sim card

Hello.
Im wirting to You because I know that You all cann help Me.
I buy a M5000 from my friend.
After two weeks the thelephone go crazy.
FIrst case:
1. If im go to the comm manager and i wan to swith on WIFI the WM is thinghing for a while and then notihing. The wifi is not Turned ON.
Can You tell me what coud it be? I upgrade the with WM 6.1 8.5 Tomala version and it starts to work after reset (it was working werry good.). Then I connect the M5000 to the computer and synhronise it so that i have my contact back and after that the wifi works. but if i go to suspend mode after ON i can not turn on the wifi again?
I tray the WM 6.1 tomala 8.7 too. It is doing that same.
2. THat same go with my sim card. After 2 weeks My M5000 did not see the sim card? I put som paper at sim card (under the batery) and it work after restart wor a while. After 5 minuts shows me "the sim card is miising" insert SIM card. !!!
And i cleaned the sim card and the pins what are reading the sim card but it do not help.
I read at some Thread on XDA forum that i schoudl clean the mainboard in the telephone - it can help for problem with SIM Card. If it is so, then with what can I do it?
Now i'm can not use any WIfi and any telephone with M5000 (Uniwersal).
If You cann then write what i should to do. Because I pay for that telephone big casch and I can not use it .
My spv hase:
BL: 1.01
Rom version: D.08.70 TML WWE
Rom date 07/18/08
Radio version: 1.18.00
Protocol wersion 42.45.P8
G3
Ram 64MB
Flash size 128 MB
06.04.2009
Hello again.
So what I did.
I take out the MainBoard form My M5000. I cleaned it whith special preparat for electronical device it call KONTAKT Cleaning preparat.
I put all things together and I turnet on the telephone. For luck it works .
The spv m5000 see the sim card. But only for feew hours. After one day the mesage "the sim card is miising" shows on screen. So I take restart the phone and again it find the sim card. After 5 mayby 8 hours the mesage "the sim card is miising" shows again.
I wass angry.
I took the newst TOMALA Roms WM6.1 wer. 8.7 and i install it on the m5000.
The situation was that same. On day it works perfektly after one day it shows the same mesage !!!
I take smol paper card and put it under the batery on sim card. I's working for a feew hours and then that same mesage shows the sim card is miising!!!!
Mayby You have some ideas what cann I do?
aha... the telephon call 112 for emergensy call. So the calling system works. Only it do not see the sim card.
If You have ideas for that reason pleas wirte it, i will check it.
THANK You for HELP.

Categories

Resources