After updating to official WM 6.1 realign loop. - Touch Dual, MDA Touch Plus General

Hello everyone,
I have an 16 key touch dual. Yesterday I've updated my phone to the new rom version from the official HTC site. But after the rom update is completed, the software asks for a Realignment of the screen, but for some reason, even after aligning the screen for 20 times in a row there is still no effect at all.
I've tried a soft/hard reset. I've even installed the rom 3 times without any luck at all. Do you guys have any suggestion what I can do about this.
Kind Regards,
PuNaNy,

HEY there !!!
this is the same problem I am having !!!!
check my post !!! http://forum.xda-developers.com/showthread.php?t=497520
please help !!!

Related

HELP With my TyTN/HERM200

Hello everybody,
i have a big problem with my Hermes TyTN/HERM200/,s/n:ht628...
When i try to power on the phone it doesn't start WM...Just hangs on th HTC Screen and no continue...
I flash with 5 different rom versions but the problem is still remain the same.If anybody solve this problem and how...
Were all the 5 ROM upgrades you did sucessful?
Which ROMs did you tried to flash?
Which bootloader version do you have now?
Have you read the wiki?
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems

Touch Screen Great problem. help plz!

I have upgrade my P3650 - its a pola100 - from the original rom to another with wm6.1.
it works great. no problem but after a week the touch screen started to work bad. when i wrote a sms i had to press the screen harder. a few days later. the screen not respond perfectly. and now it dosnt work.
i think that it was death. i reset it but i cant config the os. i touch the screen very sofly and the screen respond but i cant calibrate. i cant use it i´m getting seek!!. sorry for my english i speak spanish. please if anyone understund please respond.
Try flash the original ROM, if you can.
Do a hard reset as described here http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset_en.html
To make sure you get the best help possible better to say which 6.1 rom you installed
I had the same problem. When i uprgraded to 6.1 screen was harder to press. When pressing number one, two was picked. After a while this became worse. Eventualy screen was not responding anymore. Sent it out for repair, back in one week. Now no more problems, fix was within warranty, so no cost. Now new screen
the rom i installed is m-amine 2.0
the rom i installed is m-amine 2.0
....
the service tell you what happend?
i see
rspillo said:
Try flash the original ROM, if you can.
Click to expand...
Click to collapse
}i would like to try the original rom.} any of you know where could i find it .
HTC Touch Cruise P3650 (HTC Polaris 100) ...
Look here, there are some official ROM:
http://forum.xda-developers.com/showthread.php?t=373233

Huge problems with my Touce

Hi all,
i've tried to chnege the ROM the the last official ROM from HTC, and when getting to 32%, it got stuck, leaving me with Touch Cruise that is not working at all.
all retries never succeeded. what can i do ? the phone is not working at all.
please assist.
evolfin
Will Try To Help
As alwayes - we will try to help you - will see what we can do for a Friend
evolfin said:
Hi all,
i've tried to chnege the ROM the the last official ROM from HTC, and when getting to 32%, it got stuck, leaving me with Touch Cruise that is not working at all.
all retries never succeeded. what can i do ? the phone is not working at all.
please assist.
evolfin
Click to expand...
Click to collapse
Take a look here http://forum.xda-developers.com/showthread.php?t=381600
Follow all the steps and you should be OK. Good luck.

HTC P3600 stop at boot

since a few days, i can't load my P3600. i flash with several rom without result. i alos try splexploit and others tools. i need your advice about the way i can solve that problems
thanks
Your pcc maybe breaked !!! test orginal rom on www.htc.com
Hi Guy ... I had the same problem , and tried many ROM and also the Original Rom From HTC .... so far it works ,,, but i lost the GPS functionality ,... so i wanted to get the Wm6.1 or 6.5 ....
and i discovered one thing makes it works without stopping on boot ,,,
if i twisted the device and boot it from the button ,,, it works fine and stable for many days ,,, so i think it maybe breakage on the circuit board ,,, but i tried many times and it works,.,,,
now aday i m using wm6.1 from Thailand .... PDA MOBIZ ..very fast and stable
Try it ,,,,
i canceled the idea of buying anew PDA
it s working fine
Thanks
Egypt
Hi Guy,
can you explain your solution? how to apply it. i am not an english speaking native so if you can explain it step by step
thanks in advance

Problem with my Hermes, it runs crazy

Hi
First of all, sorry for my bad english.
I've got a problem with my hermes. It is totally unstable. Sometimes, the screen is getting darker and the hermes don't accept any input. Other times, the screen shows a grey screen...
I've made a update to the newest original german rom (win6.1), and i've also tested a rom with win6.5. The problems appeard in both versions.
PS: the update processes also stucks at 100% and the PC shows a update error(262). But the rom starts after removing the battery
Can you help me?
****ingbull86 said:
Hi
First of all, sorry for my bad english.
I've got a problem with my hermes. It is totally unstable. Sometimes, the screen is getting darker and the hermes don't accept any input. Other times, the screen shows a grey screen...
I've made a update to the newest original german rom (win6.1), and i've also tested a rom with win6.5. The problems appeard in both versions.
PS: the update processes also stucks at 100% and the PC shows a update error(262). But the rom starts after removing the battery
Can you help me?
Click to expand...
Click to collapse
Try a hard reset, and if that does not work try flashing the ROM from the SD card...http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Good luck.
Thank you JR_de. i knew i was forgetting something. =)
Flash the stripped shipped ATT ROM before you flash a custom ROM.
http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Just flash your device with new ROM.
Me too. Everytime when coocked new rom I have problem - the tom is totally unstable. I've tried everthing but problem is here again. Hermes is 6 months old. Please give some idea for this problem. Thnx....

Categories

Resources