Any one using the case, any comments? I have a HTC Touch Pro GSM, so should i buy SAND SNAP-ON FOR HTC® FUZE or GLOVE SNAP-ON FOR HTC® TOUCH PRO (CDMA)
SAND SNAP-ON FOR HTC® FUZE:
http://www.bodyglove.com/products_detail.php?product_id=25864
GLOVE SNAP-ON FOR HTC® TOUCH PRO (CDMA)
http://www.bodyglove.com/products_detail.php?product_id=25864
or would the SEIDIO Innocase Surface would be a better choice?
http://www.seidioonline.com/product-p/csr2htfe-bk.htm
btw.. I already have ZAGG's Invisible Shield full body protection on my HTC Touch Pro would the case still fit?
more than likely bro, itll fit cuz invisible shield is just like a screen protector but only better(i mean as in thickness size) but anywho i STRONGLY advised u NOT to get the Body Glove case, all though it makes the phone protect from heavy abuse and all but, i own one and personally that in some cases, the back casing would eventually make the phone pop out if ure walking when u have it on the belt clip, i had to literally hold my phone at times because of that, even my mom's popped like 2 times, luckly the phone has VERY VERY minor cosmetic damage also it would make the phone feel 25% more thick than without it. the Seidio looks like a good case and it even says "good for putting in a pocket or an outer case, but here are some others i would recommend
http://store.everythinghtc.com/mobi-products-crystal-case/4A123A3946.htm
and this one has color choices
http://store.everythinghtc.com/mobi-products-protector-case/4A123A4977.htm
I remember originally the body glove case had problems with false touch. Seidio all the way!
Nope, I got the Sand snapon. No problems here. I really like it.
i may have had the body glove but i got it from the cingular store and the back case doesnt even stay on anymore i can pull it off at will... good thing i dont actually use a belt clip.
Seidio, period.
Related
Has anyone tried using the Seido holster with a adhesive skin like the Bodyguards or Invisible shield coating? I assume the skin is very thin but then the holster may be very tight and may not allow even the slightest addition in size (0.2 mm per Invisible shield website).
Seido Holster= http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=871
Invisible shield= http://www.invisibleshield.com/smartphone/at&t/tilt.php
Bodyguardz= http://www.bodyguardz.com/BodyGuardz_for_AT_T_Tilt_8925_p/nl-batt-1107.htm
Sediosedio, can you comment on the holster if it will allow the 0.2mm?
Thanks
FYI, it does.
Just to let you know I wanted to do this exact same setup.
The good news is it does fit... the bad news is that you may be unhappy with the invisible shield.
Do a seach for my posts there is one recently describing my experience with the shield. Long story short, it doesn't cover much of the device (hardly nothing on the sides) and it doesn't really give a nice clean look when installed (unless you have access to a cleanroom with 0% dust particles in the air).
It would have been nice if it did work, as protecting the back of the phone from scratches would have been nice (as that area is exposed in the holster). Also the constant moving in and out of the holster MAY rub against the top part of the phone and cause the shield to slowly peel off...on the flip side it may be lessening wear on the phone case itself.
I am sending mine back via money-back guarantee today and have already ordered the Seido rubberized case. Unfortunately their standard holster does NOT work with their case (it is 1mm thick) so I had to order the combo to get the specialized holster too.
So, I have an extra holster for an uncased phone....if anyone wants to buy it...
I have the Invisible shield and the Seidio rubberized case. Both fits together well.
I went with the rather expensive invisible shield since I know their products and simply licked it for the apple stuff which is lying around at home.
What is the thinnest snap-on case? I saw a few "hard cover" cases on ebay but I am skeptical if they are junk. I don't wanna spend $30 on a case, but just want something thin that will protect it from scratches and some bumps.
The sticker protectors are ok, but they don't look the best.
I find that the bodyguardz sticker protectors work wornders. Personally I've used it since 2 months after I purchased my fuze and i don't get any scratches at all and they actually get inconspicuous. No one can tell that I have the stickers on it and it feels really good.
I got a great deal on amazon on a clear plastic case, a solid black case and 2 more screen protectors. Came out to around 8 bucks (including shipping). Check out around there and maybe you can find something nice.
got me a pdair aluminium case for the raphael/touch pro, works great!
I'm a truck mechanic, so I can't use anything else!
Regards,
Emile
damn. that aluminum case sounded so cool! Then it turned out to be hinged.
The aluminum case sucks!!! every time you drop the phone it comes flying out of the case. you have to keep bending back the latch for it to stay closed. the screw in clip in the back striped out in a week.
I'm in concrete, so I wouldn't use this if it was FREE!!!
I probably will be getting fuze soon.
What are some good cases?
What are some good screen protectors? That stick well, don't cause glare, don't cause touchscreen issues
What is good leather "pouch" for belt clip?
...
Just Keep It Basic And Buy From AT&T... No Problemz Out Of It Yet...
I bouth the Fullbody protector from Cellariris.com, but I only used the screen segment, its the best screen protector, I've ever owned!!
MY phone came with the AT&t snap in hard plastic holder, but, if your not planning on keeping your phone in it 24/7 I wouldn't recommend it, it puts alot of stress on the keyboard to screen hinges, removing it.
I got the OtterBox Black Defender Case - MOTOROLA ATRIX (TM) 4G with the belt clip and built in screen protector. I kind of liked it at first but it keeps jabbing me in the side and I wish I could just put it in my pocket but it's too think to do so while sitting down.
So I'm looking to get another case that will mostly protect my phone from scratches and a few bumps here and there. So this means I need a screen protector too. It's hard to tell how the screen protector feels and how the case fits on the phone.
What have you used or seen that you like and why?
hiltun said:
I got the OtterBox Black Defender Case - MOTOROLA ATRIX (TM) 4G with the belt clip and built in screen protector. I kind of liked it at first but it keeps jabbing me in the side and I wish I could just put it in my pocket but it's too think to do so while sitting down.
So I'm looking to get another case that will mostly protect my phone from scratches and a few bumps here and there. So this means I need a screen protector too. It's hard to tell how the screen protector feels and how the case fits on the phone.
What have you used or seen that you like and why?
Click to expand...
Click to collapse
I currently use the anti-glare screen protectors that AT&T carries in store. It takes away a little of the brilliance of the screen but I don't mind. I'm also using the Incipio Feather case but for more protection I also did have the Speck Candyshell which fit it really well and did not impede the screen protector. The only reason I returned it was because the "outer-shell" was too smooth for me, I like the rubberized feel of the Incipio.
I have the OtterBox Commuter case on my Atrix. I really like it. It not nearly as bulky as the defender case but still provides seemingly decent protection.
Do these cases keep it from seating on the laptop dock properly?
Seconding the Otterbox Commuter. The naked Atrix felt kinda slippery, the rubber sleeve peeking through the clip on shell makes it feel secure in my hand.
Sent from my MB860 using XDA App
I've been rocking the otterbox impact case with full ghost armor. Works and feels great
squassss said:
Do these cases keep it from seating on the laptop dock properly?
Click to expand...
Click to collapse
Does the Otter Box cases pick up a lot of lint and other stuff in your pockets?
squassss said:
Do these cases keep it from seating on the laptop dock properly?
Click to expand...
Click to collapse
As far as the laptop dock, I'm not sure but with the multimedia dock I have heard that the Speck case can fit if the insert is taken out. If you use the laptop dock quite a bit I would go with the Otterbox Impact case because it would be the easiest to remove and put back on.
hiltun said:
Does the Otter Box cases pick up a lot of lint and other stuff in your pockets?
Click to expand...
Click to collapse
Yes, Otterbox cases are notorious lint magnets. It's a trade off for the protection.
Has anyone heard about "Skinomi TechSkin", "Great Shield", or "splash Masque"?
They are the ones that you can get off of Amazon.com.
I also have the Incipio feather case, works great so far, and is easier for me to hold on to. I work in a warehouse and from handling boxes all the time its hard for me to keep a decent hold on smooth plastic unless I try to crush it.
As far as a screen protector goes, I have not seen a need for one yet. I forgot I had my keys in my pocket when I put the phone in and didn't get any scratches.
diedemus said:
As far as a screen protector goes, I have not seen a need for one yet. I forgot I had my keys in my pocket when I put the phone in and didn't get any scratches.
Click to expand...
Click to collapse
Yea, I feel th same way. I usually take such good care of my phones that I never even get scratches on the screen protector but knowing my luck if I ever tried without one something terrible would happen.
Got the Otterbox Defender for mine. I'll happily have a thicker phone for the added protection.
body glove case
Body glove case seems to be the best fit for the atrix...for me, i.e slim, feels sturdy in hand and removes easily to allow fit with other moto accessories.
Just got the Incipio case and it's great so far. I also have a SGP ultra clear screen protector.
This should be in the accessories forum.
I like to use my phones naked!
Even if they get damage.
In fact, I happen to dislike very much how those protectors make the phone larger in the pocket.
If you know of anything for the Atrix which doesn't make it bigger please let me know.
Gold luck guys.
I also have the Otterbox Commuter case and no screen protector since the display is made out of Gorilla Glass.
Not using a screen protector. Just a bodyglove tpu case. Love it.
Sent from my MB860 using XDA Premium App
Using the skinomi body skin .. it's awesome. applying the back part was a little challenging but i got it down.. I failed on my screen though because I did it in low light.. so I didn't notice i still had some lint on the screen so you can see a little when it's bright.
darkamikaze said:
Using the skinomi body skin .. it's awesome. applying the back part was a little challenging but i got it down.. I failed on my screen though because I did it in low light.. so I didn't notice i still had some lint on the screen so you can see a little when it's bright.
Click to expand...
Click to collapse
How does the Skinomi feel on the touch screen?
What is best way to protect my S4 from cracking screen. I am scared to crack screen on it.
Any screen protractor like zagg invisibleshield will work ?
Or any slim case and screen proctor combo ?
Only reason i gave up on s3 was crack screen.
My screen cracked even without dropping phone on s3 and replacement phone cracked too by dropping just from my pocket. so I moved to iPhone, but I love android.
Don't drop it or get a rubber case. Screen protectors protect from scratches, not shatter.
JihadSquad said:
Don't drop it or get a rubber case. Screen protectors protect from scratches, not shatter.
Click to expand...
Click to collapse
any suggestion on rubber case ?
I usually don't like full body case but if u have any recombination
I suggest you try the Otterbox Commuter case. I have one for my Evo LTE and I love it. If your really want the best protection available and don't mind the added bulk, then the Otterbox Defender would be the next step up in protection.
Put Zagg on mine - looks and feels nice and protects it
Only other thing is the s-view case or whatever it's called- both together protect is nicely
kool let me look up
dose tpu case any good if ya any suggestion on what brand